Fix the following lockdep warning by not reusing the hda_codec.spdif_mutex.

    ALSA sound/pci/hda/hda_codec.c:882: hda_codec_cleanup_stream: NID=0x2

    =======================================================
    [ INFO: possible circular locking dependency detected ]
    2.6.28-next-20090102 #33
    -------------------------------------------------------
    mplayer/3151 is trying to acquire lock:
     (&pcm->open_mutex){--..}, at: [<ffffffffa004ced3>] snd_pcm_release+0x43/0xd0 [snd_pcm]

    but task is already holding lock:
     (&mm->mmap_sem){----}, at: [<ffffffff810c0252>] sys_munmap+0x42/0x80

    which lock already depends on the new lock.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a quirk, model=dell, for Dell Inspiron Mini9 with ALC268 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a patch which adds correct auto detection of model for
snd-hda-intel for Acer Aspire 5930G and 6930G. Tested on my 5930G. It
finally adds hp jack sense and 5.1 speaker system sliders.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed typos of codec-id checks for AD1882/AD1882A.

Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a quirk for HP 2230s, model=laptop, with AD1984A codec.
Reference: Novell bnc#461660
	https://bugzilla.novell.com/show_bug.cgi?id=461660Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NUlrich Dangel <uli@spamt.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added functions to report jack sense.
As CXT5051_PORTB_EVENT has the same value as CONEXANT_MIC_EVENT two input
devices for the microphone will be created if using CXT5051.
Signed-off-by: NUlrich Dangel <uli@spamt.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add automatic mapping of HP Acacia motherboards to 3stack-hp.  Allows
for greater then 2 channel audio by enabling Channel Mode option in mixer.

Motherboard specs:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01321559&lc=en&dlc=en&cc=us&product=3829353&os=2093&lang=en#

Signed-off-by: Chris Bagwell <chris at cnpbagwell dot com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the more specific preset for ALC1200 above the general one for
ALC888, so that it will have the chance to get matched and selected.
Reported-by: NThomas Schneider <nailstudio@gmx.net>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The card based on stv0299 or stv0288 demodulators.
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix a typo (& and &&)
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Thanks to Troy Kisky <troy.kisky@boundarydevices.com> for noticing.

- DSP_A format has 1-bit data delay which corresponds to SSM6202 submode 2
- DSP_B has 0-bit data delay which corresponds to submode 1
- Currently driver sets them opposite so swap the submode setting
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com>
Cc: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

- OMAP McBSP DAI driver claims to support DSP_A format which has 1-bit data
  delay but configures link for 0-bit data delay which is in fact DSP_B
- Fix this by changing format from DSP_A to DSP_B
- Fix also TLV320AIC23 codec and OSK5912 machine drivers since the same
  error is populated also there
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: NArun KS <arunks@mistralsolutions.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Fixed incorrect mixer index values for 92hd83xx codec's audio
input mixer.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add check to determine if dinput_mux is set by any of patch_stac*() functions,
otherwise a invalid pointer my be referenced causing gibberish to mixer values.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the model=hp-m4 quirk for another HP dv7 (103c:30fc) with IDT
92HD71b* codec.

Reference: Novell bnc#461108
	https://bugzilla.novell.com/show_bug.cgi?id=461108

Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing __devexit annotation to wm8350_codec_remove():
  sound/soc/codecs/wm8350.c:1546: warning: 'wm8350_codec_remove' defined but not used
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Sense DaVinci does not support true I2S mode and
we don't have to use the hack, use dsp_b mode instead
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Fix the meaning of SND_SOC_DAIFMT_NB_NF to match that
used in the codec.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Add SND_SOC_DAIFMT_DSP_A mode option.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

DaVinci does not support true I2S or right justified
mode so not all I2S codecs will work with it when the codec is
master. Document this limitation.

Add dsp_a, dsp_b mode options
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Minor, just move a block of code to make next patch clearer.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Just at little cleanup of davinci_i2s_set_dai_fmt
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Document the current polarity choices.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Add constants with a value of 0 to show more explicitly
what is being requested.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The capture with 44.1kHz on ca0106 seems to cause loud noises on
later playbacks, which doesn't support 44.1kHz.  A simple fix is to
disable 44.1kHz, as the "default" PCM with dsnoop is anyway only with
48kHz.

Reference: Novell bnc#447624
	https://bugzilla.novell.com/show_bug.cgi?id=447624Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing card->private_data initialization that caused obvious
problems at PM.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the availability of ac97 at PM suspend/resume callbacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When no jack detection is available, the pins should be always
turned on since it can't be turned on/off dynamically via unsol
events.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed "unused varible" warnings in patch_sigmatel.c that have been
introduced by the last changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There will be a Oops or frequent underrun messages when playing music with
omap soc driver, this is because a data region is incorretly sized, other data
region will be overwriten when writing to this data region.
Signed-off-by: NStanley Miao <stanley.miao@windriver.com>
Acked-by: NJarkko Nikula <jarkko.nikula@nokia.com>
Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added probe_only module option to hd-audio driver.
This option specifies whether the driver creates and initializes the
codec-parser after probing.  When this option is set, the driver skips
the codec parsing and initialization but gives you proc and other
accesses.  It's useful to see the initial codec state for debugging.

The default of this value is off, so the default behavior is as same
as before.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the line_out has only one DAC and it's unique (i.e. not shared
by other outputs), assign a more reasonable and distinct mixer name
such as "Headphone" or "Speaker".
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current auto-configuration code has several problems especially
for the new IDT codecs, e.g. wrong assignment of pins and DACs or
coupled volume for speaker and headphone.

This patch is a fairly large rewrite of the auto-configuration code.
Some remaks

- mic_switch and line_switch contain NIDs instead of bool
- dac_list isn't fixed for IDT 92HD* codecs now, they are all probed
- extra HP and speakers are stored in extra_dacs[].
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous commit re-enabled hp_nid setup for IDT92HD73*, but
it's unneeded indeed for Dell laptops that have multiple headphones.
Setting the extra hp_nid results in a non-working "Headpohne" mixer
control.  Thus hp_nid should be 0 for these dell models.

Also, the automatic addition of hp_nid should check whether it's
a dual-HP model or not.  For dual-HPs, the pins are already checked
by the early workaround.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The register and channel_id pair were twisted in the pm code...
Oh my.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added "IEC958 PCM Stream" controls for the per-stream IEC958 status
bits.  Using this instead of "IEC958 Default" is safer since the status
bits will be recovered to the default states after closing the PCM
stream.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't override some values in ca0106_init_chip() at resume.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>