For a kms driver to support immediate disable of vblank
irq's reliably without introducing off by one errors or
other mayhem for clients, it must not only support a
hardware vblank counter query, but also high precision
vblank timestamping, so vblank count and timestamp can be
instantaneously reinitialzed to valid values. Additionally
the exposed hardware counter must behave as if it is
incrementing at leading edge of vblank to avoid off by
one errors during reinitialization of the counter while
the display happens to be inside or close to vblank.

Check during drm_vblank_init that a driver which claims to
be capable of vblank_disable_immediate at least supports
high precision timestamping and prevent use of instant
disable if that isn't present as a minimum requirement.

v2: Changed from DRM_ERROR to DRM_INFO and made message
    more clear, as suggested by Michel Dänzer.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was a bit too much cargo-culted, so lets make it solid:
- vblank->count doesn't need to be an atomic, writes are always done
  under the protection of dev->vblank_time_lock. Switch to an unsigned
  long instead and update comments. Note that atomic_read is just a
  normal read of a volatile variable, so no need to audit all the
  read-side access specifically.

- The barriers for the vblank counter seqlock weren't complete: The
  read-side was missing the first barrier between the counter read and
  the timestamp read, it only had a barrier between the ts and the
  counter read. We need both.

- Barriers weren't properly documented. Since barriers only work if
  you have them on boths sides of the transaction it's prudent to
  reference where the other side is. To avoid duplicating the
  write-side comment 3 times extract a little store_vblank() helper.
  In that helper also assert that we do indeed hold
  dev->vblank_time_lock, since in some cases the lock is acquired a
  few functions up in the callchain.

Spotted while reviewing a patch from Chris Wilson to add a fastpath to
the vblank_wait ioctl.

v2: Add comment to better explain how store_vblank works, suggested by
Chris.

v3: Peter noticed that as-is the 2nd smp_wmb is redundant with the
implicit barrier in the spin_unlock. But that can only be proven by
auditing all callers and my point in extracting this little helper was
to localize all the locking into just one place. Hence I think that
additional optimization is too risky.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-and-tested-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

DRM probe should not repoll a connector if it is already
connected and the DRM_CONNECTOR_POLL_DISCONNECT flag is not set.
Signed-off-by: NJosef Holzmayr <holzmayr@rsi-elektrotechnik.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For test 4.2.2.5 to pass per the Link CTS Core 1.2 rev1.1 spec, the source
device must attempt at least 7 times to read the EDID when it receives an
I2C defer. The normal DRM code makes only 7 retries, regardless of whether
or not the response is a native defer or an I2C defer. Test 4.2.2.5 fails
since there are native defers interspersed with the I2C defers which
results in less than 7 EDID read attempts.

The solution is to add the numer of defers to the retry counter when an I2C
DEFER is returned such that another read attempt will be made. This situation
should normally only occur in compliance testing, however, as a worse case
real-world scenario, it would result in 13 attempts ( 6 native defers, 7 I2C
defers) for a single transaction to complete. The net result is a slightly
slower response to an EDID read that shouldn't significantly impact overall
performance.

V2:
- Added a check on the number of I2C Defers to limit the number
  of times that the retries variable will be decremented. This
  is to address review feedback regarding possible infinite loops
  from misbehaving sink devices.
V3:
- Fixed the limit value to 7 instead of 8 to get the correct retry
  count.
- Combined the increment of the defer count into the if-statement
V4:
- Removed i915 tag from subject as the patch is not i915-specific
V5:
- Updated the for-loop to add the number of i2c defers to the retry
  counter such that the correct number of retry attempts will be
  made
Signed-off-by: NTodd Previte <tprevite@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The debug message is missing a newline at the end and it makes the
logs hard to read when a device defers a lot. Simple 2-character fix
adds the newline at the end.
Signed-off-by: NTodd Previte <tprevite@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's a silly thing to do and surprises driver writers. Most likely
this did already blow up for exynos.

It's also a silly thing to change plane state when it's off, but fbdev
is silly (it does an unconditional modeset over all planes). And
userspace can be evil. So I think we need this.

With this check in the helpers we can remove the one in i915 code for
the same conditions (becuase ->crtc iff ->fb).

Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Signed-off-by: NJohn Hunter <zhjwpku@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Our legacy SetPlane updates perform integer overflow checking on a
plane's destination rectangle in drm_mode_setplane(), and atomic updates
handled as part of a drm_atomic_state transaction do the same checking
in drm_atomic_plane_check().  However legacy cursor updates that get
routed through universal plane interfaces may bypass this overflow
checking if the driver's .update_plane is serviced by the transitional
plane helpers rather than the full atomic plane helpers.

Move the check for destination rectangle integer overflow from the
drm_mode_setplane() to __setplane_internal() so that it also covers
cursor operations.

This fixes an issue first noticed with i915 commit:

        commit ff42e093
        Author: Daniel Vetter <daniel.vetter@ffwll.ch>
        Date:   Mon Mar 2 16:35:20 2015 +0100

            Revert "drm/i915: Switch planes from transitional helpers to full
            atomic helpers"

The above revert switched us from full atomic helpers back to the
transitional helpers, and in doing so we lost the overflow checking here
for universal cursor updates.  Even though such extreme cursor positions
are unlikely to actually happen in the wild, we still don't want there
to be a change of behavior when drivers switch from transitional helpers
to full helpers.

v2: Move check from setplane ioctl to setplane_internal rather than
    adding an additional copy of the checks to the transitional plane
    helpers.  (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Testcase: igt/kms_cursor_crc
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84269Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They're only used to store const pointers anyway. This helps to keep
Ville and the compiler happy.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Not to be modified.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some non-const pointers were added since the last constification, fix
them.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add ELD versions according to HDA Specification v1.0a.

2 indicates version 2, which supports CEA_Ver 861D or below. Maximum
Baseline ELD size of 80 bytes (15 SAD count).

31 indicates an ELD that has been partially populated through
implementation specific mean of default programming before an external
graphics driver is loaded. Only the field that is called out as "canned"
field will be populated, and audio driver should ignore the non "canned"
field.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This saves some typing whenever a iteration over all the connector,
crtc or plane states in the atomic state is written, which happens
quite often.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If kref_put_mutex returns true then the caller or the put function is responsible
for unlocking the mutex. The usual pattern assumes that the free
callback unlocks the mutex, but since that is shared with the locked
variant we need to explicitly unlock here.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NIan Romanick <ian.d.romanick@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NJohn Hunter <zhjwpku@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch implements the virtual GEM driver with PRIME sharing which
allows vgem to import a gem object from other drivers for the purpose
of mmap-ing them to userspace. The mmap is done using the mmap
operation exported by other drivers.

v2: remove platform_device and do not attach to dma bufs
v3: use drm helpers for get/put pages
v4: correct dumb create pitch

Reviewed-by: Rob Clark <robdclark@gmail.com> (v3)
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> (v3)
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NZach Reizner <zachr@google.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

qemu and simics simulators both seem to expect that video should be disabled
before changing the video mode.

references:
http://git.qemu.org/?p=qemu.git;a=blob;f=hw/display/vga.c;h=c0f7b343bbab586c8593d29c7a765f1e6ca3662c;hb=HEAD#l727
http://wiki.osdev.org/Bochs_VBE_Extensions#Setting_display_resolution_and_bit_depthSigned-off-by: NChris Ruffin <chris.ruffin@intel.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Final drm-misc pull for 4.0, just various things all over, including a few
more important atomic fixes. btw I didn't pick up the vmwgfx patch from
Ville's series, but one patch has one hunk touching vmwgfx and
Thomas/Jakob didn't get around to ack it. I figured it's simple enough to
be ok though.

* tag 'topic/drm-misc-2015-03-31' of git://anongit.freedesktop.org/drm-intel:
  drm: line wrap DRM_IOCTL_DEF* macros
  drm/atomic: Don't try to free a NULL state
  drm/atomic: Clear crtcs, connectors and planes when clearing state
  drm: Rewrite drm_ioctl_flags() to resemble the new drm_ioctl() code
  drm: Use max() to make the ioctl alloc size code cleaner
  drm: Simplify core vs. drv ioctl handling
  drm: Drop ioctl->cmd_drv
  drm: Fix DRM_IOCTL_DEF_DRV()
  drm/atomic-helpers: Properly avoid full modeset dance
  drm: atomic: Allow setting CRTC active property
  drm: atomic: Expose CRTC active property
  drm: crtc_helper: Update hwmode before mode_set call
  drm: mode: Allow NULL modes for equality check
  drm: fb_helper: Simplify exit condition
  drm: mode: Fix typo in kerneldoc
  drm/dp: Print the number of bytes processed for aux nacks

Merge tag 'drm-intel-next-2015-03-27-merge' of git://anongit.freedesktop.org/drm-intel into drm-next

This backmerges 4.0-rc6 due to the recent fixes in rc5/6

- DP link rate refactoring from Ville
- byt/bsw rps tuning from Chris
- kerneldoc for the shrinker code
- more dynamic ppgtt pte work (Michel, Ben, ...)
- vlv dpll code refactoring to prep fro bxt (Imre)
- refactoring the sprite colorkey code (Ville)
- rotated ggtt view support from Tvrtko
- roll out struct drm_atomic_state to prep for atomic update (Ander)

* tag 'drm-intel-next-2015-03-27-merge' of git://anongit.freedesktop.org/drm-intel: (473 commits)
  Linux 4.0-rc6
  arm64: juno: Fix misleading name of UART reference clock
  drm/i915: Update DRIVER_DATE to 20150327
  drm/i915: Skip allocating shadow batch for 0-length batches
  drm/i915: Handle error to get connector state when staging config
  drm/i915: Compare GGTT view structs instead of types
  drm/i915: fix simple_return.cocci warnings
  drm/i915: Add module param to test the load detect code
  drm/i915: Remove usage of encoder->new_crtc from clock computations
  drm/i915: Don't look at staged config crtc when changing DRRS state
  drm/i915: Convert intel_pipe_will_have_type() to using atomic state
  drm/i915: Pass an atomic state to modeset_global_resources() functions
  drm/i915: Add dynamic page trace events
  drm/i915: Finish gen6/7 dynamic page table allocation
  drm/i915: Remove unnecessary gen6_ppgtt_unmap_pages
  drm/i915: Fix i915_dma_map_single positive error code
  drm/i915: Prevent out of range pt in gen6_for_each_pde
  drm/i915: fix definition of the DRM_IOCTL_I915_GET_SPRITE_COLORKEY ioctl
  drm/i915: Rip out GET_SPRITE_COLORKEY ioctl
  watchdog: imgpdc: Fix default heartbeat
  ...

Improve the readability and keeps the lines shorter than 80 columns.
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

add PM fix.

* 'drm-atmel-hlcdc-4.1-fixes' of git://github.com/bbrezillon/linux-at91:
  drm: atmel-hlcdc: use appropriate enabled flag in suspend/resume

- Allow amdkfd to work with multiple kgd instances. This is in preparation for
  AMD's new open source kernel graphic driver (amdgpu), and for the new
  AMD APU, Carrizo.

- Convert timestamping to use 64bit time accessors

- Three other minor changes.

* tag 'drm-amdkfd-next-2015-03-25' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Add multiple kgd support
  drm/amdkfd: Convert timestamping to use 64bit time accessors
  drm/amdkfd: add debug prints for process teardown
  drm/amdkfd: Remove unused field from struct qcm_process_device
  drm/amdkfd: rename fence_wait_timeout

Consistently with other free functions, handle the NULL case without
oopsing.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Backmerge Linux 4.0-rc6 because conflicts are (again) getting out of
hand. To make sure we don't lose any bugfixes from the 4.0-rc5-rc6
flurry of patches we've applied them all to -next too.

Conflicts:
	drivers/gpu/drm/i915/intel_display.c

Always take the version from -next, we've already handled all
conflicts with explicit cherrypicking.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Users of the atomic state assume that if the pointer to a crtc, plane or
connector is not NULL in the respective object vector, than the state
for that object in *_states vector also won't be NULL. That assumption
was broken by drm_atomic_state_clear(), which would clear the state
pointer but leave the pointer to the object still set.

This fixes a NULL pointer dereference in i915 caused by the use of
drm_atomic_state_clear().

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pull ARM SoC fixes from Olof Johansson:
 "The latest and greatest fixes for ARM platform code.  Worth pointing
  out are:

   - Lines-wise, largest is a PXA fix for dealing with interrupts on DT
     that was quite broken.  It's still newish code so while we could
     have held this off, it seemed appropriate to include now

   - Some GPIO fixes for OMAP platforms added a few lines.  This was
     also fixes for code recently added (this release).

   - Small OMAP timer fix to behave better with partially upstreamed
     platforms, which is quite welcome.

   - Allwinner fixes about operating point control, reducing
     overclocking in some cases for better stability.

  plus a handful of other smaller fixes across the map"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: juno: Fix misleading name of UART reference clock
  ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
  ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
  ARM: socfpga: dts: fix spi1 interrupt
  ARM: dts: Fix gpio interrupts for dm816x
  ARM: dts: dra7: remove ti,hwmod property from pcie phy
  ARM: OMAP: dmtimer: disable pm runtime on remove
  ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
  ARM: OMAP2+: Fix socbus family info for AM33xx devices
  ARM: dts: omap3: Add missing dmas for crypto
  ARM: dts: rockchip: disable gmac by default in rk3288.dtsi
  MAINTAINERS: add rockchip regexp to the ARM/Rockchip entry
  ARM: pxa: fix pxa interrupts handling in DT
  ARM: pxa: Fix typo in zeus.c
  ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage

Merge tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes

Allwinner fixes for 4.0

There's a few fixes to merge for 4.0, one to add a select in the machine
Kconfig option to fix a potential build failure, and two fixing cpufreq related
issues.

* tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
  ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
  ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for the -rc cycle:

- Fix a device tree based booting vs legacy booting regression for
  omap3 crypto hardware by adding the missing DMA channels.

- Fix /sys/bus/soc/devices/soc0/family for am33xx devices.

- Fix two timer issues that can cause hangs if the timer related
  hwmod data is missing like it often initially is for new SoCs.

- Remove pcie hwmods entry from dts as that causes runtime PM to
  fail for the PHYs.

- A paper bag type dts configuration fix for dm816x GPIO
  interrupts that I just noticed. This is most of the changes
  diffstat wise, but as it's a basic feature for connecting
  devices and things work otherwise, it should be fixed.

* tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix gpio interrupts for dm816x
  ARM: dts: dra7: remove ti,hwmod property from pcie phy
  ARM: OMAP: dmtimer: disable pm runtime on remove
  ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
  ARM: OMAP2+: Fix socbus family info for AM33xx devices
  ARM: dts: omap3: Add missing dmas for crypto
Signed-off-by: NOlof Johansson <olof@lixom.net>

Late fix for v4.0 on the SoCFPGA platform:
- Fix interrupt number for SPI1 interface

* tag 'socfpga_fix_for_v4.0_2' of git://git.rocketboards.org/linux-socfpga-next:
  ARM: socfpga: dts: fix spi1 interrupt
Signed-off-by: NOlof Johansson <olof@lixom.net>

The UART reference clock speed is 7273.8 kHz, not 72738 kHz.

Dots aren't usually used in node names even though ePAPR permits
them.  However, this can easily be avoided by expressing the
frequency in Hz, not kHz.

This patch changes the name to refclk7273800hz, reflecting the
actual clock speed.
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

arm: pxa: fixes for v4.0-rc5

There are only 2 fixes, one for the zeus board about the regulator changes,
where a typo prevented the zeus board from having a working can regulator,
and one regression triggered by the interrupts IRQ shift of 16 affecting all
boards.

* tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux:
  ARM: pxa: fix pxa interrupts handling in DT
  ARM: pxa: Fix typo in zeus.c
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull x86 fix from Ingo Molnar:
 "Fix x86 syscall exit code bug that resulted in spurious non-execution
  of TIF-driven user-return worklets, causing big trouble for things
  like KVM that rely on user notifiers for correctness of their vcpu
  model, causing crashes like double faults"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm/entry: Check for syscall exit work with IRQs disabled