- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 24 3月, 2010 5 次提交
-
-
由 Hans-Joachim Picht 提交于
This patch now allows the use of the proc interface to either activate or deactivate call home on panic. e.g. echo 1 > /proc/sys/kernel/callhome strict_strtoul() requires _either_'\n\0' _or_ '\0' termination. This was missing and therefore the interface did not recognise valid input. Signed-off-by: NHans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Avoid 64 bit division to fix this compile error on 32 bit: drivers/s390/char/sclp_cmd.c:711: undefined reference to `__udivdi3' Also move the whole arch_get_memory_phys_device function to the memory hotplug related functions. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Check tsb validity before the tcw_get_tsb function is called. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Weinhuber 提交于
All TCWs need to be aligned on a 64 byte boundary or the I/O will be rejected. For recovery requests we create fresh TCWs, so we need to do the proper alignment here as well. Signed-off-by: NStefan Weinhuber <wein@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
To save the registers for all CPUs a sigp "store status" is done that stores the registers to address absolute zero. To access storage at absolute zero, normally the address of the prefix register of the accessing CPU has to be used. This does not work when large pages are active (currently only under LPAR). In order to fix that problem, instead of memcpy memcpy_real is used, which switches to real mode where prefixing works. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 18 3月, 2010 1 次提交
-
-
由 Heiko Carstens 提交于
Implement arch specific arch_get_memory_phys_device function and initialize phys_device for each memory section. That way we finally can tell which piece of memory belongs to which physical device. This makes s390's /sys/devices/system/memory/memoryX/phys_device display the correct thing? Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 3月, 2010 5 次提交
-
-
由 Frank Blaschka 提交于
Deactivate inbound checksumming on HiperSocket is a valid but dangerous optimization in case the frame is routed from an OSA network to an HiperSockets network. To go for sure we change the default to software checksumming. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Depending on their definition in z/VM, virtual devices for z/VM VSWITCH or GuestLAN must be configured either in layer2 or in layer3 mode. If qeth detects a layer mismatch, device activation fails. Trying to recover from this error cannot help; thus scheduling a recovery should be avoided. In addition, since recovery is forbidden during online setting of a qeth device, existence of its network device is guaranteed for all dev_close() calls in qeth. The corresponding checks can be removed. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
If HiperSockets Network Traffic Analyzer is switched off, but trace disabling fails somehow, the qeth driver does not switch off its promisc mode status. A following sniffer reactivation fails, since qeth does not see a need to reenable tracing. At the same time the code analyzing results of trace commands is restructured. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Blaschka 提交于
dhcp frames are valid IPv4 packets so there is no need to send them in pass thru mode. This allows dhcp packets to pass HiperSockets. Also the dhcp release frame is send out correctly with this patch. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
provide qeth kmsg definitions to enable hash string generation for kernel message created with dev_err(). Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2010 7 次提交
-
-
由 Hendrik Brueckner 提交于
The smsgiucv_app driver registers a callback with the smsgiucv driver to receive z/VM CP special messages (SMSG) starting with "APP". When the callback is called for special messages, the driver creates an uevent for the received message. The uevent consists of additional environment data containing the message prefix ("APP"), message sender, and message content. udev rules can be used to trigger application specific actions through matching the content or sender of the special message. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Declare the smsgiucv prefix char pointer as "const" and use use const char pointers in callback functions. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Weinhuber 提交于
In z/VM it is possible to attach a device as read-only. To prevent unintentional write requests and subsequent I/O errors, we can detect this configuration using the z/VM DIAG 210 interface and set the respective linux block device to read-only as well. Signed-off-by: NStefan Weinhuber <wein@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ursula Braun 提交于
zfcp and qeth are setting flags for the qdio-layer, but these flags are not used in qdio. Patch removes the flag definitions from qdio and their settings in zfcp and qeth. Cc: Jan Glauber <jang@linux.vnet.ibm.com> Cc: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ursula Braun 提交于
Add a missing bracket to only log the outbound handler event in the appropriate case. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
After we try to steal a lock on a ccw device in boxed state, we have to restart device recognition and potentially reprobing. In this case ccw_device_init_count was erroneously decreased twice. This patch fixes the issue. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Nigel Hislop 提交于
Remove the PSF order/suborder check from the Symmetrix CKD dasd ioctl. In exchange restrict the ioctl to CAP_SYS_ADMIN and CAP_SYS_RAWIO. Signed-off-by: NNigel Hislop <hislop_nigel@emc.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 2月, 2010 17 次提交
-
-
由 Michael Holzheu 提交于
With this patch the prefix registers of all online CPUs are stored in the the zcore dump header. This allows dump analysis tools to access the register information that is stored in the prefix pages without using the System.map. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Flushing the dasd ccw request queue may stop the processing of the block device request queue. Destroy partitions may wait for outstanding requests and thus hang. Swapping dasd_destroy_partitions and dasd_flush_request_queue so that the request queue is empty before dasd_destroy_partitions is called. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
The function dasd_device_from_cdev returns a reference to the dasd device and increases the refcount by one. If an exception occurs, the refcount was not decreased in all cases e.g. in dasd_discipline_show. Prevent the offline processing from hang by correcting two functions to decrease the refcount even if an error occured. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Setting a DASD online and offline in quick succession may cause a kernel panic or let the chhccwdev command wait forever. The Online process is split into two parts. After the first part is finished the offline process may be called. This may result in a situation where the second online processing part tries to set the DASD offline as well. Use a mutex to protect online and offline against each other. Also correct some checking. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Introduce the MACHINE_IS_LPAR flag for code that should only be executed if Linux is running in an LPAR. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Remove a memset hack that relied on the internal layout of the qdio_irq struct and move the per device statistics data into an own cache line to avoid cache line bashing between the inbound and the outbound queue tasklets. Also reduce the number of allocated queues from 32 to 4 which is the current maximum. That saves a cache line in struct qdio_irq. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Add counters for the number of processed SBALs. The numbers summarize how many SBALs were processed at each queue scan and indicate the utilization of the queue. Furthermore the number of unsuccessfull queue scans, SBAL errors and the total number of processed SBALs are accounted. Also regroup struct qdio_q to move read-mostly and write-mostly data into different cachelines. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Remove support to be able to dump 31 bit systems with a 64 bit dumper. This is mostly useless since no distro ships 31 bit kernels together with a 64 bit dumper. We also get rid of a bit of hacky code. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Some parts of cio do not shift PAGE_DEFAULT_KEY correctly and end up with an incorrect key in their data structures. Since the default key is zero this doesn't really matter. However if somebody would use key-controlled protection for debugging purposes it would be quite helpful if all of this would work as expected. Also remove a stale declaration. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
ccw_device_pm_restore: trigger subchannel event to better handle changes to the subchannel device. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Callers of ccw_device_notify could not distinguish between a driver who has no notifier registered and a driver who doesn't want to keep a device after a certain event. Change this by adding proper return codes. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Make the potentially long blocking wait_event's used by the cio settle mechanism interruptible. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
To fetch a pending channel report word (crw) we use a kernel thread which triggers stcrw and sleeps on a semaphore. The s390 machine check handler uses crw_handle_channel_report to handle one crw if needed. This patch replaces the semaphore with a waitqueue (to block the kernel thread) and an atomic_t (to count the number of pending requests). By this we achieve the ability to force this thread to check for a pending crw (independent on when it is triggered by the machine check handler) and wait for this action to finish. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
This patch introduces a proc file cio_settle. A write request to this file is blocked until all queued cio actions are handled. This will allow userspace to wait for pending work affecting device availability after changing cio_ignore or the hardware configuration. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We used to maintain 2 singlethreaded workqueues for synchronization and to trigger work from interrupt context. Since our latest cio changes we only use one of these workqueues. So get rid of the unused workqueue, rename the remaining one to "cio_work_q" and move its ownership to the channel subsystem driver. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 2月, 2010 2 次提交
-
-
由 Martin K. Petersen 提交于
Except for SCSI no device drivers distinguish between physical and hardware segment limits. Consolidate the two into a single segment limit. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 18 2月, 2010 2 次提交
-
-
由 Christof Schmitt 提交于
Move the qdio related structs and some helper functions to a new zfcp_qdio.h header file. While doing this, rename the struct zfcp_queue_req to zfcp_qdio_req to adhere to the naming scheme used in zfcp. This allows a better seperation of the qdio code and inlining the helper functions will save some function calls. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
The FC4 types are already available from exchange port. Use this for reporting the FC4 types, instead of having the value hardcoded in zfcp. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-