Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make resume/on codepath not to wait for panel_power_cycle_delay(t11_t12)
if this time is already spent in suspend/poweron time.

v2: Use CLOCK_BOOTTIME and remove jiffies for panel power cycle
    delay calculation(Ville).

v3: Addressed below comments
    1. Tracking time from where last powercycle is initiated.
    2. Used ktime_get_bootime() wrapper for boottime clock.
    3. Used ktime_ms_delta() to get time difference.

v4: Updated v3 change log in detail.

v5: Removed static from panel_power_on_time(Stéphane).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NAbhay Kumar <abhay.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453513144-14135-1-git-send-email-abhay.kumar@intel.com

Backmerge to get at the new encoder_mask support in atomic helpers.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

After the drm_device_is_unplugged() was removed, the 'dev' variable is now
unused, and we get a warning for that:

drivers/gpu/drm/msm/msm_fbdev.c: In function 'msm_fbdev_mmap':
drivers/gpu/drm/msm/msm_fbdev.c:65:21: error: unused variable 'dev' [-Werror=unused-variable]

This removes the variable as well.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: e9f8250f ("drm/msm: remove the drm_device_is_unplugged check")
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455181810-3910161-1-git-send-email-arnd@arndb.de

The fake agp driver for the intel graphics gart is only needed for ums
support. And we ditched that a long time ago:

commit 03dae59c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jul 23 16:27:25 2014 +0200

    drm/i915: Ditch UMS config option

With this there's no longer the problem that 2 drivers (fake agp
driver and the drm/i915 driver) fight over the same piece, which fixes
apparent dma leaks detected by CONFIG_DMA_API_DEBUG.

Note that the leak isn't real since intel-gtt refcounts and will tear
down eventually. But the debug code assumes that when the i915 driver
unbinds from the pci device everything should be gone. Which isn't the
case if we have intel-agp enabled - userspace might need it. But by
ditching this intel-gtt setup and teardown is completely tied to the
livetime of the "real" driver.

While at it untangle the init ordering a bit - the fake agp wouldn't
be initialized correctly if i915.ko loads first. Which isn't a problem
since when i915 loads in kms mode you won't need the fake agp support
needed by the ums driver ...

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93793Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453901881-26425-3-git-send-email-daniel.vetter@ffwll.ch

It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.

This patch applies to TV.

V2:
- removed computation for max pixel clock

V3:
- cleanup by removing unnecessary lines

V4:
- max_pixclk variable renamed as max_dotclk
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454419003-6001-7-git-send-email-mika.kahola@intel.com

It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.

This patch applies to CRT.

V2:
- removed computation for max pixel clock

V3:
- cleanup by removing unnecessary lines

V4:
- max_pixclk variable renamed as max_dotclk
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454419003-6001-6-git-send-email-mika.kahola@intel.com

It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.

This patch applies to SDVO.

V2:
- removed computation for max pixel clock

V3:
- cleanup by removing unnecessary lines

V4:
- max_pixclk variable renamed as max_dotclk
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454419003-6001-5-git-send-email-mika.kahola@intel.com

It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.

This patch applies to DisplayPort MST.

V2:
- removed computation for max pixel clock

V3:
- cleanup by removing unnecessary lines

V4:
- max_pixclk variable renamed as max_dotclk
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454419003-6001-4-git-send-email-mika.kahola@intel.com

It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.

This patch applies to HDMI.

V2:
- removed computation for max dot clock

V3:
- cleanup by removing unnecessary lines

V4:
- max_pixclk variable renamed as max_dotclk
- check for stereo mode added
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454419003-6001-3-git-send-email-mika.kahola@intel.com

It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.

This patch applies to DisplayPort.

V2:
- removed computation for max DOT clock

V3:
- cleanup by removing unnecessary lines

V4:
- max_pixclk renamed as max_dotclk
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454419003-6001-2-git-send-email-mika.kahola@intel.com

Other bridge drivers don't implement this optional function.
Removed dummy code from dw-hdmi brigde driver.
Signed-off-by: NCarlos Palminha <palminha@synopsys.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455120639-29934-1-git-send-email-palminha@synopsys.com

Removed dummy mode_fixup.
Signed-off-by: NCarlos Palminha <palminha@synopsys.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455118167-12178-3-git-send-email-palminha@synopsys.com

Removed dummy mode_fixup.
Signed-off-by: NCarlos Palminha <palminha@synopsys.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455118167-12178-2-git-send-email-palminha@synopsys.com

The DRM drivers i915, nouveau and radeon may be compiled with
CONFIG_ACPI not set, in which case acpi_dev_present() is undefined.

Add a no-op stub for apple_gmux_present() which is used if
CONFIG_APPLE_GMUX is not enabled to avoid build breakage.
(CONFIG_APPLE_GMUX depends on CONFIG_ACPI.)
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160210131741.GA15492@wunner.de

Avoids null crash when encoders don't implement mode_fixup.
Signed-off-by: NCarlos Palminha <palminha@synopsys.com>
[danvet: Also update kerneldoc.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

While running some tests on the scheduler patches with rpm enabled I
came across a corruption in the ringbuffer, which was root-caused to
the GPU being suspended while commands were being emitted to the
ringbuffer. The access to memory was failing because the GPU needs to
be awake when accessing stolen memory (where my ringbuffer was located).
Since we have this constraint it looks like a sensible idea to check
that we hold a refcount when we access the rungbuffer.

v2: move the check from ring_begin to ringbuffer iomap time (Chris)
v3: update comment (Chris)

Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453909429-11024-1-git-send-email-daniele.ceraolospurio@intel.com

Avoid i2c slave encoder drivers to copy/paste code to implement functions that will
only return true.
Signed-off-by: NCarlos Palminha <palminha@synopsys.com>
[danvet: whitespace requested by Jani.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455106118-32145-1-git-send-email-palminha@synopsys.com

This fails to undo the setup for pin==0; moreover, something
interesting happens if the setup failed already at pin==0.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: f899fc64 ("drm/i915: use GMBUS to manage i2c links")
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-3-git-send-email-linux@rasmusvillemoes.dk

The AGP_INTEL driver provides an interface for very old userspace to
control the GART (though the GART itself was only ever emulated on Intel
systems). The pci bridge discovery code is also used by the i915.ko
driver to set up the GTT on old systems, but it does not require the
old userspace interface. When i915.ko selects the old interface, it
binds another user to the core GTT routines, and in particular creates a
second reference to the scratch pages allocated. This hinders resource
leak debugging for when we unload i915.ko as we want to assert that all
DMA pages have been released, but we appear to leak because of the
secondary interface which persists after i915.ko unloads.

All i915.ko users do not require the old /dev/agpgart interface so stop
selecting it and simplify our debugging by dropping the historical
baggage.

Note that by selecting AGP=n it was already possible to unselect
AGP_INTEL. But since we've dropped support for any of the AGP stuff
long ago there's really no point for this any more.

Also note that we still need INTEL_GTT, which is the underlying,
shared, driver for the graphics GART on gen1-5.

v2: Entirely new commit message (Chris, Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453901881-26425-2-git-send-email-daniel.vetter@ffwll.ch

Recently discovered by enabling CONFIG_DMA_API_DEBUG in our CI. By the
looks of it broken since forever.

v2: Don't forget to set the scratch page back to wb (Chris). Reuse
intel_gtt_teardown_scratch_page for that (and fix it up to treat
needs_dmar y/n correctly).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93793Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453901881-26425-1-git-send-email-daniel.vetter@ffwll.ch

Revision id along with device id is useful in better identification of the HW
and its limitations so include this detail in error state.

v2: make it clear that it is PCI revision and We might as well dump PCI
subsystem details while we update this (Ville, Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454001521-7701-1-git-send-email-arun.siluvery@linux.intel.com

Swap the order of context & engine cleanup, so that contexts are cleaned
up first, and *then* engines. This is a more sensible order anyway, but
in particular has become necessary since the 'intel_ring_initialized()
must be simple and inline' patch, which now uses ring->dev as an
'initialised' flag, so it can now be NULL after engine teardown. This
in turn can cause a problem in the context code, which (used to) check
the ring->dev->struct_mutex -- causing a fault if ring->dev was NULL.

Also rename the cleanup function to reflect what it actually does
(cleanup engines, not a ringbuffer), and fix an annoying whitespace issue.

v2: Also make the fix in i915_load_modeset_init, not just in
    i915_driver_unload (Chris Wilson)
v3: Had extra stuff in it.
v4: Reverted extra stuff (so we're back to v2).
    Rebased and updated commentary above (Dave Gordon).
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Signed-off-by: NDavid Gordon <david.s.gordon@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453504211-7982-2-git-send-email-david.s.gordon@intel.com

Some Gen7/8 production parts may have the Display Pipe C fused off.
In this case, the display hardware will prevent the enable bit in
PIPE_CONF register (for Pipe C) from being set to 1.

Fixed by adjusting pipe_count to reflect this.

v2: Rename HSW_PIPE_C_DISABLE to IVB_PIPE_C_DISABLE as it already exists
    on ivybridge (Ville)
v3: Remove unnecessary MMIO read, correct the description (Damien)
v4: Be more specific in description (Patrick)
Signed-off-by: NGabriel Feceoru <gabriel.feceoru@intel.com>
Reviewed-by: NPatrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453462125-21519-1-git-send-email-gabriel.feceoru@intel.com

We accidentally point both cfgcr registers for the second shared DPLL to
the same location in i915_reg.h. This results in a lot of hw pipe state
mismatches whenever we try to do a modeset that requires allocating the
DPLL to a CRTC:

[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x80000168, found 0x000004a5)
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 108000, found 49500)
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 108000, found 49500)

This usually ends up causing blank monitors, since the DPLL never can
get set to the right clock.

Fixes: 086f8e84 ("drm/i915: Prefix raw register defines with underscore")
Signed-off-by: NLyude <cpaul@redhat.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454600601-21900-1-git-send-email-cpaul@redhat.com

The current code fails to call i2c_del_adapter on
dev_prev->gmbus[0].adapter, and if the for loop above failed already
at i==0, all hell breaks loose when we do the loop body for
i = -1,-2,...
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-2-git-send-email-linux@rasmusvillemoes.dkReviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a few helpers to get the dimensions of the chroma plane(s).

v2: Add kernel-doc (Daniel)
v3: Fix kerneldoc "Returns:" style (Daniel)
    Uninline the functions and check for num_planes (Daniel)
v4: Add the required EXPORT_SYMBOL()s

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455031784-10941-1-git-send-email-ville.syrjala@linux.intel.com

This flag is only used for drm/udl.
Signed-off-by: NHaixia Shi <hshi@chromium.org>
Reviewed-by: NStéphane Marchesin <marcheu@chromium.org>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454709464-2536-1-git-send-email-hshi@chromium.org

The warning message in drm_mode_parse_command_line_for_connector miss
the [drm] at beginning.
This patch add it and take the opportunity to convert
printk(KERN_WARNING to pr_warn()
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454594633-15100-1-git-send-email-clabbe.montjoie@gmail.com

Since drm_property_create_range can be failed in memory pressure,
it needs to be checked and return -ENOMEM.
Signed-off-by: NInsu Yun <wuninsu@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454025276-13465-1-git-send-email-wuninsu@gmail.com

Skip DDI PLL selection if display type is DSI/MIPI.
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1454671768-27062-1-git-send-email-mika.kahola@intel.com

gmux is a microcontroller built into dual GPU MacBook Pros.
On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux
to temporarily switch DDC so that we can probe the panel's EDID.

The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary
because if either of them is disabled but gmux is present, the driver
would never load, even if we're the active GPU. (vga_default_device()
would evaluate to NULL and vga_switcheroo_handler_flags() would
evaluate to 0.)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/552da6d85a82092146af7b0693595fa2a9ea376b.1452525860.git.lukas@wunner.de

gmux is a microcontroller built into dual GPU MacBook Pros.
On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux
to temporarily switch DDC so that we can probe the panel's EDID.

The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary
because if either of them is disabled but gmux is present, the driver
would never load, even if we're the active GPU. (vga_default_device()
would evaluate to NULL and vga_switcheroo_handler_flags() would
evaluate to 0.)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: NLukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d9542ca5041178165d3ff286c90cc99634f7d2ce.1452525860.git.lukas@wunner.de

gmux is a microcontroller built into dual GPU MacBook Pros.
On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux
to temporarily switch DDC so that we can probe the panel's EDID.

The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary
because if either of them is disabled but gmux is present, the driver
would never load, even if we're the active GPU. (vga_default_device()
would evaluate to NULL and vga_switcheroo_handler_flags() would
evaluate to 0.)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: NLukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/f56ee6a0600a3e1bb5bed4d0db4ed9ade7445c47.1452525860.git.lukas@wunner.de

Centralize gmux' ACPI HID in a header file and add apple_gmux_present().
This can be used by other drivers to activate quirks specific to dual
GPU MacBook Pros & Mac Pros. The alternative would be to hardcode DMI
or PCI IDs and amend them whenever Apple introduces a new machine.
Tested-by: NLukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/89c23769058a340e5e11d4a7102f3793d3b0c94c.1452525860.git.lukas@wunner.de

The pre-retina MacBook Pro uses an LVDS panel and a gmux controller
to switch the panel between its two GPUs. The panel mode in VBIOS
is notoriously bogus on these machines.

Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS
if the vga_switcheroo handler is capable of temporarily switching
the panel's DDC lines to the discrete GPU. This allows us to retrieve
the EDID if the panel is currently muxed to the integrated GPU.

This only enables EDID probing on the pre-retina MBP (2008 - 2013).
The retina MBP (2012 - present) uses eDP and gmux is not capable of
switching AUX separately from the main link on these models.
This will be addressed in later patches.

List of pre-retina MBPs with dual GPUs, one of them AMD:
    [MBP  8,2 2011  intel SNB + amd turks     pre-retina  15"]
    [MBP  8,3 2011  intel SNB + amd turks     pre-retina  17"]

v3: Commit newly added due to introduction of drm_get_edid_switcheroo()
    wrapper which drivers need to opt-in to.

v5: Rebase on "vga_switcheroo: Add handler flags infrastructure",
    i.e. call drm_get_edid_switcheroo() only if the handler
    indicates that DDC is switchable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/dae71655e8c484fbef492d3389c157975f9622c9.1452525860.git.lukas@wunner.de

The pre-retina MacBook Pro uses an LVDS panel and a gmux controller
to switch the panel between its two GPUs. The panel mode in VBIOS
is notoriously bogus on these machines.

Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS
if the vga_switcheroo handler is capable of temporarily switching
the panel's DDC lines to the discrete GPU. This allows us to retrieve
the EDID if the panel is currently muxed to the integrated GPU.
Likewise, ask vga_switcheroo to switch DDC before probing LVDS
connectors.

This only enables EDID probing on the pre-retina MBP (2008 - 2013).
The retina MBP (2012 - present) uses eDP and gmux is not capable of
switching AUX separately from the main link on these models.
This will be addressed in later patches.

List of pre-retina MBPs with dual GPUs, either or both Nvidia:
    [MBP  5,1 2008  nvidia MCP79 + G96        pre-retina  15"]
    [MBP  5,2 2009  nvidia MCP79 + G96        pre-retina  17"]
    [MBP  5,3 2009  nvidia MCP79 + G96        pre-retina  15"]
    [MBP  6,2 2010  intel ILK + nvidia GT216  pre-retina  15"]
    [MBP  6,1 2010  intel ILK + nvidia GT216  pre-retina  17"]
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]

v3: Commit newly added due to introduction of drm_get_edid_switcheroo()
    wrapper which drivers need to opt-in to.

v5: Rebase on "vga_switcheroo: Add handler flags infrastructure",
    i.e. call drm_get_edid_switcheroo() only if the handler
    indicates that DDC is switchable.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: NLukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/e9466eb3d66b5b30f1e93c3b3da79d8b9ad0830f.1452525860.git.lukas@wunner.de

The pre-retina MacBook Pro uses an LVDS panel and a gmux controller
to switch the panel between its two GPUs. The panel mode in VBIOS
is notoriously bogus on these machines and some models have no
VBIOS at all.

Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS
if the vga_switcheroo handler is capable of temporarily switching
the panel's DDC lines to the integrated GPU. This allows us to
retrieve the EDID if the panel is currently muxed to the discrete GPU.

This only enables EDID probing on the pre-retina MBP (2008 - 2013).
The retina MBP (2012 - present) uses eDP and gmux is not capable of
switching AUX separately from the main link on these models.
This will be addressed in later patches.

List of pre-retina MBPs with dual GPUs, one of them Intel:
    [MBP  6,2 2010  intel ILK + nvidia GT216  pre-retina  15"]
    [MBP  6,1 2010  intel ILK + nvidia GT216  pre-retina  17"]
    [MBP  8,2 2011  intel SNB + amd turks     pre-retina  15"]
    [MBP  8,3 2011  intel SNB + amd turks     pre-retina  17"]
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]

v3: Commit newly added due to introduction of drm_get_edid_switcheroo()
    wrapper which drivers need to opt-in to.

v5: Rebase on "vga_switcheroo: Add handler flags infrastructure",
    i.e. call drm_get_edid_switcheroo() only if the handler
    indicates that DDC is switchable.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: NLukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/bb095e14a2259be7fdd10092f9d6874a9be8f27b.1452525860.git.lukas@wunner.de

Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04:
    Some dual graphics machines support muxing the DDC separately from
    the display, so make use of this functionality when reading the EDID
    on the inactive GPU. Also serialize drm_get_edid() with a mutex to
    avoid races on the DDC mux state.

Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22:
    I can't figure out why I didn't like this, but I rewrote this [...]
    to lock/unlock the ddc lines [...]. I think I'd prefer something
    like that otherwise the interface got really ugly.

Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-09:
    v3:   Move vga_switcheroo calls to a wrapper around drm_get_edid()
          which drivers can call on muxed machines. This avoids other
          drivers having to go through the vga_switcheroo motions even
          though they are never used on a muxed platform
          (Thierry Reding, Daniel Vetter, Alex Deucher)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: NPierre Moreau <pierre.morrow@free.fr>
    [MBP  5,3 2009  nvidia MCP79 + G96        pre-retina  15"]
Tested-by: NWilliam Brown <william@blackhats.net.au>
    [MBP  8,2 2011  intel SNB + amd turks     pre-retina  15"]
Tested-by: NLukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/b898d0da4c134f2642d0122479006863e1830723.1452525860.git.lukas@wunner.de

Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04:
    The gmux allows muxing the DDC independently from the display, so
    support this functionality. This will allow reading the EDID for the
    inactive GPU, fixing issues with machines that either don't have a
    VBT or have invalid mode data in the VBT.

Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-12:
    Change semantics of ->switch_ddc handler callback to return previous
    DDC owner. Original version tried to determine previous DDC owner
    with find_active_client() in vga_switcheroo but this fails if the
    inactive client registers before the active client.

    v2.4: Retain semantics of ->switchto handler callback to switch all
          pins, including DDC (Daniel Vetter)

    v4:   Advertise ->switch_ddc handler callback only on the pre-retina
          Macbook Pro. The retina uses eDP instead of LVDS and gmux no
          longer does the muxing itself but merely controls an external
          mux. That mux is incapable of switching the AUX channel
          separately from the main link. It's an NXP CBTL06142
          (alternate parts: TI HD3SS212, Pericom PI3VDP12412,
          see datasheets below).

    v5:   Rebase on "apple-gmux: Track switch state".
          Rebase on "vga_switcheroo: Add handler flags infrastructure".
          Rebase on 5d170139 ("Constify vga_switcheroo_handler"),
          requires 2 structs, 1x with ->switchto for pre-retinas,
          1x without for retinas).
          Add error message if handler registration with vga_switcheroo
          fails.

    Teardowns identifying the mux:
    http://www.electronicproducts.com/-whatsinside_text-145.aspx
    http://slideshare.net/jjwu6266/apple-2012-wwdc-apple-macbook-pro-with-retina-display
    http://www.techrepublic.com/blog/cracking-open/teardown-shows-retina-macbook-pro-is-nearly-impossible-to-upgrade-difficult-to-work-on/

    Mux Datasheets:
    http://www.nxp.com/documents/data_sheet/CBTL06141.pdf
    http://www.ti.com/lit/ds/symlink/hd3ss212.pdf
    https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: NLukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/17fe8bfb0415d713bb4174f84ac9aae5d7d9a5f8.1452525860.git.lukas@wunner.de