We have multiple forcewake domains now on recent gens. Change the
function naming to reflect this.

v2: More verbose names (Chris)
v3: Rebase
v4: Rebase
v5: Add documentation for forcewake_get/put
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These two were using a fw dance logic where posting read was done
after both domain bit were set. When in other gens, the posting
read is done immediately after setting the forcewake bit for each
domain.

Now bring these in line with other gens.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we now have forcewake domains, take advantage of it
by putting the differences in gen fw handling in data rather
than in code.

In past we have opencoded this quite extensively as the fw handling
is in the fast path. There has also been a lot of cargo-culted
copy'n'pasting from older gens to newer ones.

Now when the releasing of the forcewake is done by deferred timer,
it gives chance to consolidate more. Due to the frequency of actual hw
access being significantly less.

Take advantage of this and generalize the fw handling code
as much as possible. But we still aim to keep the forcewake sequence
particularities for each gen intact. So the access pattern
to fw engines should remain the same.

v2: - s/old_ack/clear_ack (Chris)
    - s/post_read/posting_read (Chris)
    - less polite commit msg (Chris)

v3: - rebase
    - check and clear wake_count in init

v4: - fix posting reads for gen8 (PRTS)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Introduce a structure to track the individual forcewake domains and use
that to eliminate duplicate logic.

v2: - Rebase on latest dinq (Mika)
    - for_each_fw_domain macro (Mika)
    - Handle reset atomically, keeping the timer running (Mika)
    - for_each_fw_domain parameter ordering (Chris)
    - defer timer on new register access (Mika)

v3: - Fix forcewake_reset/get race by waiting pending timers

v4: - cond_resched and verbose warning on timer deletion (Chris)
    - need to run pending timers manually on reset

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With gen < 6 we don't need to take uncore lock as we
don't have anything to protect from concurrent access.

v2: rebase and account for gen9 changes

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On user forcewake access, assert that runtime pm reference is held.
Fix and cleanup the callsites accordingly.

v2: Remove intel_runtime_pm_get() rebasehap (Deepak)

v3: use drivers own runtime state tracking as pm_runtime_active()
    will return wrong results when we are in resume callchain (Mika)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Calling intel_runtime_pm_put() is illegal from a soft-irq context, so
revert the crude hack

commit aa0b3b5b
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Tue Apr 1 14:55:07 2014 -0300

    drm/i915: don't schedule force_wake_timer at gen6_read

and apply the single line corrective instead.

v2: assert forcewake is off after the forcewake_reset (Paulo)

References: https://bugs.freedesktop.org/show_bug.cgi?id=80913
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v1)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move all remaining elements that were unique to execlists queue items
in to the associated request.

Issue: VIZ-4274

v2: Rebase. Fixed issue of overzealous freeing of request.
v3: Removed re-addition of cleanup work queue (found by Daniel Vetter)
v4: Rebase.
v5: Actual removal of intel_ctx_submit_request. Update both tail and postfix
pointer in __i915_add_request (found by Thomas Daniel)
v6: Removed unrelated changes
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NThomas Daniel <thomas.daniel@intel.com>
[danvet: Reformat comment with strange linebreaks.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The first pass implementation of execlists required a backpointer to the context to be held
in the intel_ringbuffer. However the context pointer is available higher in the call stack.
Remove the backpointer from the ring buffer structure and instead pass it down through the
call stack.

v2: Integrate this changeset with the removal of duplicate request/execlist queue item members.
v3: Rebase
v4: Rebase. Remove passing of context when the request is passed.
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NThomas Daniel <thomas.daniel@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Where there were duplicate variables for the tail, context and ring (engine)
in the gem request and the execlist queue item, use the one from the request
and remove the duplicate from the execlist queue item.

Issue: VIZ-4274

v1: Rebase
v2: Fixed build issues. Keep separate postfix & tail pointers as these are
used in different ways. Reinserted missing full tail pointer update.
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NThomas Daniel <thomas.daniel@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a reference and pointer from the execlist queue item to the associated
gem request. For execlist requests that don't have a request, create one
as a placeholder.

Issue: VIZ-4274
v1: Rebase after upstream of "Replace seqno values with request structures" patchset.
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NThomas Daniel <thomas.daniel@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So that atomic operations will reference the right crtc state.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The previous patch changed the config field in intel_crtc to a pointer,
but to keep the mechanical changes (done with spatch) separate from the
new code, the pointer was made to point to a new _config field with type
struct intel_crtc_state added to that struct. This patch improves that
code by getting rid of that field, allocating a state struct in
intel_crtc_init() a keeping it properly updated when a mode set
happens.

v2: Manual changes split from previous patch. (Matt)
    Don't leak the current state when the crtc is destroyed (Matt)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
[danvet: Squash in fixup from Matt Roper for driver unload.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To match the semantics of drm_crtc->state, which this will eventually
become. The allocation of the memory for config will be fixed in a
followup patch. By adding the extra _config field to intel_crtc it was
possible to generate this entire patch with the cocci script below.

@@ @@
struct intel_crtc {
...
-struct intel_crtc_state config;
+struct intel_crtc_state _config;
+struct intel_crtc_state *config;
...
}
@@ struct intel_crtc *crtc; @@
-memset(&crtc->config, 0, sizeof(crtc->config));
+memset(crtc->config, 0, sizeof(*crtc->config));
@@ @@
__intel_set_mode(...) {
<...
-to_intel_crtc(crtc)->config = *pipe_config;
+(*(to_intel_crtc(crtc)->config)) = *pipe_config;
...>
}
@@ @@
intel_crtc_init(...) {
...
WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
+intel_crtc->config = &intel_crtc->_config;
return;
...
}
@@ struct intel_crtc *crtc; @@
-&crtc->config
+crtc->config
@@ struct intel_crtc *crtc; identifier member; @@
-crtc->config.member
+crtc->config->member
@@ expression E; @@
-&(to_intel_crtc(E)->config)
+to_intel_crtc(E)->config
@@ expression E; identifier member; @@
-to_intel_crtc(E)->config.member
+to_intel_crtc(E)->config->member

v2: Clarify manual changes by splitting them into another patch. (Matt)
    Improve cocci script to generate even more of the changes. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In functions that define a local pipe_config variable to point to
crtc->config, replace remaining references to crtc->config with
the local variable. This makes the code more consistent and easier
to change in an automated manner.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reduces the number of direct users of crtc->new_config, opening up
the possibilty of removing it altogether.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And get rid of the duplicate mode structures. This patch was generated
with the following semantic patch:

@@ @@
struct intel_crtc_state {
+struct drm_crtc_state base;
+
...
-struct drm_display_mode requested_mode;
-struct drm_display_mode adjusted_mode;
...
}
@@ struct intel_crtc_state *state; @@
-state->adjusted_mode
+state->base.adjusted_mode
@@ struct intel_crtc_state *state; @@
-state->requested_mode
+state->base.mode
@@ struct intel_crtc_state state; @@
-state.adjusted_mode
+state.base.adjusted_mode
@@ struct intel_crtc_state state; @@
-state.requested_mode
+state.base.mode
@@ struct drm_crtc *crtc; @@
-to_intel_crtc(crtc)->config.adjusted_mode
+to_intel_crtc(crtc)->config.base.adjusted_mode
@@ identifier member; expression E; @@
-PIPE_CONF_CHECK_FLAGS(adjusted_mode.member, E);
+PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.member, E);
@@ identifier member; @@
-PIPE_CONF_CHECK_I(adjusted_mode.member);
+PIPE_CONF_CHECK_I(base.adjusted_mode.member);
@@ identifier member; @@
-PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.member);
+PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.member);

v2: Completely generate the patch with cocci. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The objective is to make this structure usable with the atomic helpers,
so let's start with the rename. Patch generated with coccinelle:

@@ @@
-struct intel_crtc_config {
+struct intel_crtc_state {
...
}
@@ @@
-struct intel_crtc_config
+struct intel_crtc_state

v2: Completely generate the patch with cocci. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Earlier, DRRS structures were specific to eDP (used only in intel_dp).
Since DRRS can be extended to other internal display types
(if the panel supports multiple RR), modifying structures
to be part of drm_i915_private and have a provision to add display related
structs like intel_dp.
Also, aligning with frontbuffer tracking mechanism, the new structure
contains data for busy frontbuffer bits.
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On VLV/CHV the rc6 residency calculations read a second register to
determine the actual units used for the residency value. The variable
name 'reg' where that register value is stored shadows the function
argument 'reg'. That can easily leave the reader utterly confused, so
rename the internal variable to 'clk_reg'.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
[danvet: Spellfix in commit message.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't register the rc6p and rc6pp sysfs files on VLV, so there's no
point in having any VLV checks in them. Drop the checks.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The performance regression from the CHV RC6 EI->TO change is now fixed
so re-enable TO mode for better RC6 resicency.

This reverts commit e85a5c79.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CherryViewA0_iGfx_BIOS_DRIVER_PUNIT_spec_y14w28d5 tells us not to enable
the RP down timeout interrupt, and says that the timeout value is hence
not used. We do enable that interrupt currently though, so leaving the
timeout as 0 results in very poor performance as the GPU frequency keeps
dropping constantly. So just program the register with the recommended
value.

Leaving the interrupt enabled doesn't seem to do any harm so far. So
I've decided to leave it on for now, just to avoid making CHV a
special case.

This fixes the performance regression from:
 commit 5a0afd4b
 Author: Deepak S <deepak.s@linux.intel.com>
 Date:   Sat Dec 13 11:43:27 2014 +0530

    drm/i915/chv: Use timeout mode for RC6 on chv

Cc: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We use decimal for all the other RP magic values, so change
GEN6_RP_DOWN_TIMEOUT to decimal as well. Also change the order
of the register writes to match the BIOS spec for easier verification.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Follow the sequence in the BIOS spec and clear the RC_CONTROL register
before changing any of the other RC6/RP registers.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use new Sideband offset to read max/min/gaur freq based on the SKU it
is running on. Based on the Number of EU, we read different bits to
identify the max frequencies at which system can run.

v2: reuse mask definitions & INTEL_INFO() to get device info (Ville)

v3: add break in switch conditions (Ville)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Looks like latest BSW/CHV production system has sideband address > 128.
Use u32 data types to cover new offset/address range :)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Starting with Cherryview, devices may have a varying number of EU for
a given ID due to creative fusing. Punit support different frequency for
different fuse data. We use this patch to help get total eu enabled and
read the right offset to get RP0

Based upon a patch from Jeff, but reworked to only store eu_total and
avoid sending info to userspace

v2: Format register definitions (Jani)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Acked-by: NJeff McGee <jeff.mcgee@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we transitioned to the atomic plane helpers in commit:

        commit ea2c67bb
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Tue Dec 23 10:41:52 2014 -0800

            drm/i915: Move to atomic plane helpers (v9)

one of the changes was to call intel_plane_destroy_state() while tearing
down a plane to prevent leaks when unloading the driver.  That made
sense when the patches were first written, but before they were merged,

        commit 3009c037
        Author:     Thierry Reding <treding@nvidia.com>
        Date:       Tue Nov 25 12:09:49 2014 +0100

            drm: Free atomic state during cleanup

had already landed, which made this the responsibility of the DRM core.
The result was that we were kfree()'ing the state twice, and also
possibly double-unref'ing a framebuffer, leading to memory corruption
when the driver was unloaded.

The fix is to simply not try to cleanup the state in the i915 teardown
code now that the core handles this for us.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88433
Testcase: igt/drv_module_reload
Root-cause-analysis-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The rotation property is shared by multiple drivers, so it makes sense
to store the rotation value (for atomic-converted drivers) in the common
plane state so that core code can eventually access it as well.

Cc: dri-devel@lists.freedesktop.org
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

single rockchip fix.

* 'drm-next' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: fix dma_alloc_attrs() error check

Radeon drm-next changes for 3.20.  Highlights:
- Indirect draw support for evergreen/NI hw
- SMC fan control support for SI/CI
- Manual fan control for SI/CI
- DP audio support
- Lots of code cleanup

* 'drm-next-3.20' of git://people.freedesktop.org/~agd5f/linux: (45 commits)
  drm/radeon: make MMU_NOTIFIER optional
  drm/radeon: use NULL rather then 0 in audio detect
  drm/radeon: whitespace clean up in radeon_audio.c
  radeon/audio: enable DP audio
  radeon/audio: moved audio caps programming to audio_hotplug() function
  radeon/audio: applied audio_dpms() and audio_mode_set() calls
  radeon/audio: consolidate audio_mode_set() functions
  radeon/audio: removed unnecessary debug settings
  radeon/audio: moved mute programming to a separate function
  radeon/audio: moved audio packet programming to a separate function
  radeon/audio: set_avi_packet() function cleanup
  radeon/audio: removed unnecessary CRC control programing
  radeon: moved HDMI color depth programming to a separate function
  radeon/audio: moved VBI packet programming to separate functions
  radeon/audio: consolidate update_acr() functions (v2)
  radeon/audio: consolidate update_avi_infoframe() functions
  radeon/audio: consolidate audio_set_dto() functions
  radeon/audio: consolidate audio_fini() functions
  radeon/audio: consolidate audio_enable() functions
  radeon/audio: consolidate select_pin() functions
  ...

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

  This pull request includes some code refactoring which removes
   Exynos specific structure names and uses generic structure
   names instead, and makes all plane updating to be done
   by only exynos_update_plane function. And also it includes
   some cleanup and fixup patches.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (22 commits)
  drm/exynos: fimd: check error status for drm_iommu_attach_device
  drm/exynos: create exynos_check_plane()
  drm/exynos: remove mode_set() ops from exynos_crtc
  drm/exynos: don't duplicate drm_display_mode in fimd context
  drm/exynos: remove struct exynos_drm_manager
  drm/exynos: remove drm_dev from struct exynos_drm_manager
  drm/exynos: move 'type' from manager to crtc struct
  drm/exynos: remove pipe member of struct exynos_drm_manager
  drm/exynos: add pipe param to exynos_drm_crtc_create()
  drm/exynos: rename base object of struct exynos_drm_crtc to 'base'
  drm/exynos: remove exynos_drm_crtc_mode_set_commit()
  drm/exynos: call exynos_update_plane() directly on page flips
  drm/exynos: unify plane update on exynos_update_plane()
  drm/exynos: remove exynos_plane_commit() wrapper
  drm/exynos: don't do any DPMS operation while updating planes
  drm/exynos: Don't touch DPMS when updating overlay planes
  drm/exynos/vidi: remove useless ops->commit()
  drm/exynos/fimd: don't initialize 'ret' variable in fimd_probe()
  drm/exynos: remove struct exynos_drm_overlay
  drm/exynos: remove exynos_drm_crtc_plane_* wrappers
  ...

Merge tag 'drm-amdkfd-next-fixes-2015-01-25' of git://people.freedesktop.org/~gabbayo/linux into drm-next

Here is a pull request of fixes for 3.20 patches, including the fix you asked
me when you merged the previous pull request.

* tag 'drm-amdkfd-next-fixes-2015-01-25' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: change amdkfd version to 0.7.1
  drm/radeon: cik_sdma_ctx_switch_enable() can be static
  drm/amdkfd: Fix sparse errors
  drm/amdkfd: Handle case of invalid queue type
  drm/amdkfd: Add break at the end of case
  drm/amdkfd: Remove negative check of uint variable

formats and num_formats arguments were previously called fmts and nfmts.
Fix the kernel doc comment so that it matches the new argument names.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over

* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
  drm/i915: Update DRIVER_DATE to 20150117
  i915: reuse %ph to dump small buffers
  drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
  drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
  drm/i915: PSR link standby at debugfs
  drm/i915: group link_standby setup and let this info visible everywhere.
  drm/i915: Add missing vbt check.
  drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
  drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
  drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
  drm/i915: Fix kerneldoc for i915 atomic plane code
  drm/i915: Don't pretend SDVO hotplug works on 915
  drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
  drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
  drm/i915: Make hpd arrays big enough to avoid out of bounds access
  Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
  drm/i915: Improve HiZ throughput on Cherryview.
  drm/i915: Reset CSB read pointer in ring init
  drm/i915: Drop unused position fields (v2)
  drm/i915: Move to atomic plane helpers (v9)
  ...

Just flushing out my drm-misc branch, nothing major. Well too old patches
I've dug out from years since a patch from Rob look eerily familiar ;-)

* tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel:
  drm/probe-helper: clamp unknown connector status in the poll work
  drm/probe-helper: don't lose hotplug event
  next: drm/atomic: Use copy_from_user to copy 64 bit data from user space
  drm: Make drm_read() more robust against multithreaded races
  drm/fb-helper: Propagate errors from initial config failure
  drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"

check error status for drm_iommu_attach_device() and make sure
it propagates till the caller.
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: NInki Dae <daeinki@gmail.com>

Split update plane in two parts, an initial check part that can fail
and the update part that can't fail.

This is a important step for the upcoming atomic modesetting support.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

It is no longer used anywhere.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>