commit 06624818
(usb: musb: disable double buffering when it's broken),
introduced a compile error when gadget API is disabled.

Fix it.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This adds the N8 to the list of devices in cdc-acm, in order to get the
secondary ACM device exposed.

In the spirit of:
http://kerneltrap.org/mailarchive/linux-usb/2010/9/4/6264554Signed-off-by: NArvid Ephraim Picciani <arvid.picciani@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Trying to compile drivers/usb/gadget/f_mass_storage.o currently fails and
spews a ton of warnings :

  CC      drivers/usb/gadget/f_mass_storage.o
drivers/usb/gadget/f_mass_storage.c:436:22: error: field ‘function’ has incomplete type
drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_from_func’:
drivers/usb/gadget/f_mass_storage.c:466:9: warning: type defaults to ‘int’ in declaration of ‘__mptr’
drivers/usb/gadget/f_mass_storage.c:466:9: warning: initialization from incompatible pointer type
drivers/usb/gadget/f_mass_storage.c: At top level:
drivers/usb/gadget/f_mass_storage.c:2743:15: warning: ‘struct usb_composite_dev’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c:2743:15: warning: its scope is only this definition or declaration, which is probably not what you want
drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_common_init’:
drivers/usb/gadget/f_mass_storage.c:2745:34: error: dereferencing pointer to incomplete type
drivers/usb/gadget/f_mass_storage.c:2775:23: error: dereferencing pointer to incomplete type
drivers/usb/gadget/f_mass_storage.c:2779:3: error: implicit declaration of function ‘usb_string_id’
drivers/usb/gadget/f_mass_storage.c: At top level:
drivers/usb/gadget/f_mass_storage.c:2984:60: warning: ‘struct usb_configuration’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c:3003:57: warning: ‘struct usb_configuration’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_bind’:
drivers/usb/gadget/f_mass_storage.c:3006:31: error: dereferencing pointer to incomplete type
drivers/usb/gadget/f_mass_storage.c:3013:2: error: implicit declaration of function ‘usb_interface_id’
drivers/usb/gadget/f_mass_storage.c:3033:3: error: dereferencing pointer to incomplete type
drivers/usb/gadget/f_mass_storage.c:3034:6: error: dereferencing pointer to incomplete type
drivers/usb/gadget/f_mass_storage.c:3043:4: error: dereferencing pointer to incomplete type
drivers/usb/gadget/f_mass_storage.c:3044:7: error: dereferencing pointer to incomplete type
drivers/usb/gadget/f_mass_storage.c:3045:26: error: dereferencing pointer to incomplete type
drivers/usb/gadget/f_mass_storage.c: At top level:
drivers/usb/gadget/f_mass_storage.c:3067:14: warning: ‘struct usb_configuration’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c:3067:14: warning: ‘struct usb_composite_dev’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_bind_config’:
drivers/usb/gadget/f_mass_storage.c:3093:2: error: implicit declaration of function ‘usb_add_function’
drivers/usb/gadget/f_mass_storage.c: At top level:
drivers/usb/gadget/f_mass_storage.c:3103:9: warning: ‘struct usb_configuration’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c:3103:9: warning: ‘struct usb_composite_dev’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_add’:
drivers/usb/gadget/f_mass_storage.c:3105:2: warning: passing argument 1 of ‘fsg_bind_config’ from incompatible pointer type
drivers/usb/gadget/f_mass_storage.c:3065:12: note: expected ‘struct usb_composite_dev *’ but argument is of type ‘struct usb_composite_dev *’
drivers/usb/gadget/f_mass_storage.c:3105:2: warning: passing argument 2 of ‘fsg_bind_config’ from incompatible pointer type
drivers/usb/gadget/f_mass_storage.c:3065:12: note: expected ‘struct usb_configuration *’ but argument is of type ‘struct usb_configuration *’
drivers/usb/gadget/f_mass_storage.c: At top level:
drivers/usb/gadget/f_mass_storage.c:3190:23: warning: ‘struct usb_composite_dev’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c:3195:23: warning: ‘struct usb_composite_dev’ declared inside parameter list
drivers/usb/gadget/f_mass_storage.c:3193:1: error: conflicting types for ‘fsg_common_from_params’
drivers/usb/gadget/f_mass_storage.c:3188:1: note: previous declaration of ‘fsg_common_from_params’ was here
drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_common_from_params’:
drivers/usb/gadget/f_mass_storage.c:3199:2: warning: passing argument 2 of ‘fsg_common_init’ from incompatible pointer type
drivers/usb/gadget/f_mass_storage.c:2741:27: note: expected ‘struct usb_composite_dev *’ but argument is of type ‘struct usb_composite_dev *’
make[1]: *** [drivers/usb/gadget/f_mass_storage.o] Error 1
make: *** [drivers/usb/gadget/f_mass_storage.o] Error 2

This is due to the missing include of linux/usb/composite.h - this patch
adds the missing include.

In addition there's also a problem in fsg_common_init() where we memset
'common', but we use the size of a pointer to 'struct fsg_common' as the
size argument to memset(), not the actual size of the struct. This patch
fixes the sizeof so we zero the entire struct as intended.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the below compilation errors.

  CC      drivers/usb/gadget/ci13xxx_msm.o
  CC      net/mac80211/led.o
  drivers/usb/gadget/ci13xxx_msm.c: In function 'ci13xxx_msm_notify_event':
  drivers/usb/gadget/ci13xxx_msm.c:42: error: 'USB_AHBBURST' undeclared (first use in this function)
  drivers/usb/gadget/ci13xxx_msm.c:42: error: (Each undeclared identifier is reported only once
  drivers/usb/gadget/ci13xxx_msm.c:42: error: for each function it appears in.)
  drivers/usb/gadget/ci13xxx_msm.c:43: error: 'USB_AHBMODE' undeclared (first use in this function)
make[4]: *** [drivers/usb/gadget/ci13xxx_msm.o] Error 1
make[3]: *** [drivers/usb/gadget] Error 2

MSM USB driver is not supported on boards like trout (MSM7201) which
has an external PHY.
Signed-off-by: NPavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There is a msleep with spin lock held during ehci pci suspend, which will
cause kernel BUG: scheduling while atomic. Fix that.

[  184.139620] BUG: scheduling while atomic: kworker/u:11/416/0x00000002
[  184.139632] 4 locks held by kworker/u:11/416:
[  184.139640]  #0:  (events_unbound){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb
[  184.139669]  #1:  ((&entry->work)){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb
[  184.139686]  #2:  (&__lockdep_no_validate__){+.+.+.}, at: [<c127cde3>] __device_suspend+0x2c/0x154
[  184.139706]  #3:  (&(&ehci->lock)->rlock){-.-...}, at: [<c132f3d8>] ehci_pci_suspend+0x35/0x7b
[  184.139725] Modules linked in: serio_raw pegasus joydev mrst_gfx(C) battery
[  184.139748] irq event stamp: 52
[  184.139753] hardirqs last  enabled at (51): [<c14fdaac>] mutex_lock_nested+0x258/0x293
[  184.139766] hardirqs last disabled at (52): [<c14fe7b4>] _raw_spin_lock_irqsave+0xf/0x3e
[  184.139777] softirqs last  enabled at (0): [<c10371c1>] copy_process+0x3d2/0x109d
[  184.139789] softirqs last disabled at (0): [<  (null)>]   (null)
[  184.139802] Pid: 416, comm: kworker/u:11 Tainted: G         C  2.6.37-6.3-adaptation-oaktrail #37
[  184.139809] Call Trace:
[  184.139820]  [<c102eeff>] __schedule_bug+0x5e/0x65
[  184.139829]  [<c14fbca5>] schedule+0xac/0xc4c
[  184.139840]  [<c11d4845>] ? string+0x37/0x8b
[  184.139853]  [<c1044f21>] ? lock_timer_base+0x1f/0x3e
[  184.139863]  [<c14fe7da>] ? _raw_spin_lock_irqsave+0x35/0x3e
[  184.139876]  [<c1061590>] ? trace_hardirqs_off+0xb/0xd
[  184.139885]  [<c14fccdc>] schedule_timeout+0x283/0x2d9
[  184.139896]  [<c104516f>] ? process_timeout+0x0/0xa
[  184.139906]  [<c14fcd47>] schedule_timeout_uninterruptible+0x15/0x17
[  184.139916]  [<c104566a>] msleep+0x10/0x16
[  184.139926]  [<c132f316>] ehci_adjust_port_wakeup_flags+0x69/0xf6
[  184.139937]  [<c132f3eb>] ehci_pci_suspend+0x48/0x7b
[  184.139946]  [<c1326587>] suspend_common+0x52/0xbb
[  184.139956]  [<c1326625>] hcd_pci_suspend+0x26/0x28
[  184.139967]  [<c11e7182>] pci_pm_suspend+0x5f/0xd0
[  184.139976]  [<c127ca3a>] pm_op+0x5d/0xf0
[  184.139986]  [<c127ceac>] __device_suspend+0xf5/0x154
[  184.139996]  [<c127d2c8>] async_suspend+0x16/0x3a
[  184.140006]  [<c1058f54>] async_run_entry_fn+0x89/0x111
[  184.140016]  [<c104deb6>] process_one_work+0x295/0x4cb
[  184.140026]  [<c1058ecb>] ? async_run_entry_fn+0x0/0x111
[  184.140036]  [<c104e3d0>] worker_thread+0x17f/0x298
[  184.140045]  [<c104e251>] ? worker_thread+0x0/0x298
[  184.140055]  [<c105277f>] kthread+0x64/0x69
[  184.140064]  [<c105271b>] ? kthread+0x0/0x69
[  184.140075]  [<c1002efa>] kernel_thread_helper+0x6/0x1a
Signed-off-by: NYin Kangkai <kangkai.yin@intel.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
CC: David Brownell <dbrownell@users.sourceforge.net>
CC: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1444) adds an unusual_devs entry for an MP3 player from
Coby electronics.  The device has two nasty bugs.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NJasper Mackenzie <scarletpimpernal@hotmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add the USB Vendor ID and Product ID for a Acton Research Corp.
spectrograph device with a FTDI chip for serial I/O.
Signed-off-by: NMichael H Williamson <michael.h.williamson@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The USB core keeps track of pending resume requests for root hubs, in
order to resolve races between wakeup requests and suspends.  However
the code that does this is subject to another race (between wakeup
requests and resumes) because the WAKEUP_PENDING flag is cleared
before the resume occurs, leaving a window in which another wakeup
request might arrive.

This patch (as1447) fixes the problem by clearing the WAKEUP_PENDING
flag after the resume instead of before it.

This fixes Bugzilla #24952.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NPaul Bender <pebender@san.rr.com>
Tested-by: Nwarpme <warpme@o2.pl>
Cc: stable <stable@kernel.org> [.36+]
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If anyone comes across a high-speed hub that (by mistake or by design)
claims to have no Transaction Translators, plugging a full- or
low-speed device into it will cause the USB stack to crash.  This
patch (as1446) prevents the problem by ignoring such devices, since
the kernel has no way to communicate with them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NPerry Neben <neben@vmware.com>
CC: <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NYusuke Goda <yusuke.goda.sx@renesas.com>
Acked-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

on ST Micro Connect Lite we have 4 port
Part A and B for the JTAG
Port C Uart
Port D for PIO
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This device suffers from the off-by-one error when reporting the capacity,
so add entry with US_FL_FIX_CAPACITY.
Signed-off-by: NNick Holloway <Nick.Holloway@pyrites.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In drivers/usb/host/sl811-hcd.c::sl811h_urb_enqueue(), memory is allocated
with kzalloc() and assigned to 'ep'. If we leave via the 'fail' label due
to 'if (ep->maxpacket > H_MAXPACKET)', then 'ep' will go out of scope
without having been assigned to anything, so we'll leak the memory we
allocated.
This patch fixes the leak by simply calling kfree(ep); before jumping to
the 'fail' label.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If usb_deregister() is called after usb_serial_deregister() when
the device is plugged in, the following Oops occurs:

[   95.337377] BUG: unable to handle kernel NULL pointer dereference at 00000010
[   95.338236] IP: [<c0776b2d>] klist_put+0x12/0x62
[   95.338356] *pdpt = 000000003001a001 *pde = 0000000000000000
[   95.338356] Oops: 0000 [#1] SMP
[   95.340499] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb8/idVendor
[   95.340499] Modules linked in: ti_usb_3410_5052(-) usbserial cpufreq_ondemand acpi_cpufreq mperf iptable_nat nf_nat iptable_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipv6 uinput arc4 ecb iwlagn iwlcore mac80211 cfg80211 microcode pcspkr acer_wmi joydev wmi sky2 [last unloaded: scsi_wait_scan]
[   95.341908]
[   95.341908] Pid: 1532, comm: modprobe Not tainted 2.6.37-rc7+ #6 Eiger                          /Aspire 5930
[   95.341908] EIP: 0060:[<c0776b2d>] EFLAGS: 00010246 CPU: 0
[   95.341908] EIP is at klist_put+0x12/0x62
[   95.341908] EAX: 00000000 EBX: eedc0c84 ECX: c09c21b4 EDX: 00000001
[   95.341908] ESI: 00000000 EDI: efaa0c1c EBP: f214fe2c ESP: f214fe1c
[   95.341908]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   95.341908] Process modprobe (pid: 1532, ti=f214e000 task=efaaf080 task.ti=f214e000)
[   95.341908] Stack:
[   95.341908]  f214fe24 eedc0c84 efaaf080 efaa0c1c f214fe34 c0776ba8 f214fe5c c0776c76
[   95.341908]  c09c21b4 c09c21b4 eedc0c84 efaaf080 00000000 c0634398 eafe2d1c f7b515f0
[   95.341908]  f214fe6c c0631b5c eafe2d50 eafe2d1c f214fe7c c0631ba2 eafe2d1c eafe2c00
[   95.341908] Call Trace:
[   95.341908]  [<c0776ba8>] ? klist_del+0xd/0xf
[   95.341908]  [<c0776c76>] ? klist_remove+0x48/0x74
[   95.341908]  [<c0634398>] ? devres_release_all+0x49/0x51
[   95.341908]  [<c0631b5c>] ? __device_release_driver+0x7b/0xa4
[   95.341908]  [<c0631ba2>] ? device_release_driver+0x1d/0x28
[   95.341908]  [<c06317c4>] ? bus_remove_device+0x92/0xa1
[   95.341908]  [<c062f3d8>] ? device_del+0xf9/0x13e
[   95.341908]  [<f7b06146>] ? usb_serial_disconnect+0xd9/0x116 [usbserial]
[   95.341908]  [<c0681e3f>] ? usb_disable_interface+0x32/0x40
[   95.341908]  [<c0683972>] ? usb_unbind_interface+0x48/0xfd
[   95.341908]  [<c0631b43>] ? __device_release_driver+0x62/0xa4
[   95.341908]  [<c06320b9>] ? driver_detach+0x62/0x81
[   95.341908]  [<c0631a41>] ? bus_remove_driver+0x8f/0xae
[   95.341908]  [<c063214c>] ? driver_unregister+0x50/0x57
[   95.341908]  [<c0682f95>] ? usb_deregister+0x77/0x84
[   95.341908]  [<f7b505b6>] ? ti_exit+0x26/0x28 [ti_usb_3410_5052]
[   95.341908]  [<c046a307>] ? sys_delete_module+0x181/0x1de
[   95.341908]  [<c04e2727>] ? path_put+0x1a/0x1d
[   95.341908]  [<c047f4c5>] ? audit_syscall_entry+0x116/0x138
[   95.341908]  [<c04094df>] ? sysenter_do_call+0x12/0x28
[   95.341908] Code: 00 83 7d f0 00 74 09 85 f6 74 05 89 f0 ff 55 f0 8b 43 04 5a 5b 5e 5f 5d c3 55 89 e5 57 56 53 89 c3 83 ec 04 8b 30 83 e6 fe 89 f0 <8b> 7e 10 88 55 f0 e8 47 26 01 00 8a 55 f0 84 d2 74 17 f6 03 01
[   95.341908] EIP: [<c0776b2d>] klist_put+0x12/0x62 SS:ESP 0068:f214fe1c
[   95.341908] CR2: 0000000000000010
[   95.342357] ---[ end trace 8124d00ad871ad18 ]---
Signed-off-by: NIonut Nicu <ionut.nicu@mindbit.ro>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The major and minor number saved in the product_info structure
were copied from the address instead of the data, causing an
inconsistency in the reported versions during firmware loading:

 usb 4-1: firmware: requesting edgeport/down.fw
 /usr/src/linux/drivers/usb/serial/io_edgeport.c: downloading firmware version (930) 1.16.4
 [..]
 /usr/src/linux/drivers/usb/serial/io_edgeport.c: edge_startup - time 3 4328191260
 /usr/src/linux/drivers/usb/serial/io_edgeport.c:   FirmwareMajorVersion  0.0.4

This can cause some confusion whether firmware loaded successfully
or not.

Cc: stable@kernel.org
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There are a few error paths in ehci_hcd_omap_probe that can be triggered
because of memory allocation or hw failure. Change those dev_dbg error
prints to dev_err with an error code printed so that the end users are able
to notice the issue.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Gadget MUSB driver handles dma mappings in musb_gadget_queue(). Where as it is
possible for  dma code to reject the usb request later at ->channel_program()
called from txstate()/rxstate()

For example ->channel_program in tusb6010_omap.c:

static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
        u8 rndis_mode, dma_addr_t dma_addr, u32 len)
{
...
	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
		return false;
...
	if (dma_addr & 0x2)
		return false;
...
}

In this case, usb request will be handled in PIO mode which renders dma mapping
operations unnecessary.

This patch adds an api to allow dma code to indicate incompatibility with usb
request. Gadget musb driver call this api, if available, before dma mappings to
avoid any unnecessary mapping operations.
Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

If dma buffers are mapped by a higher layer, with a boolean musb_request.mapped
it is still possible to call dma_sync_single_for_device() from
musb_g_giveback(), even if txstate()/rxstate() has called unmap_dma_buffer()
before falling back to pio mode.

Moreover, check for musb_ep->dma is moved within map_dma_buffer() so where
applicable checks for it are removed. And where possible, checks for
is_dma_capable() are merged with buffer map state check.
Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We know that blackfin doesn't support double
buffering feature as of today. So we add a
flag set by musb_platform_init() to forcefully
disable that feature.

Such flag is created and marked as deprecated
to force us to find a solution for the missing
double buffering support on blackfin.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Blackfin platform doesn't support 32bits musbdma registers, so change back to
use musb_read/writew instead of musb_read/writel and simply some format casts.
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

musb_probe() only regards 0 as a wrong IRQ number, despite platform_get_irq()
that it calls returns -ENXIO in that case. It leads to musb_init_controller()
calling request_irq() with a negative IRQ number, and when it naturally
fails, the following is printed to the console:

request_irq -6 failed!
musb_init_controller failed with status -19

Fix musb_probe() to filter out the error values as well as 0.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch fixes kernel panic during s2ram, which is caused
by the below:

	- musb is not put into drv data of musb platform device if
	CONFIG_USB_MUSB_HDRC_HCD is defined

	- glue layer driver always get musb instance via platform_get_drvdata.

The patch fixes the issue by always puting musb into drv data
of musb platform device, which is doable even the platform device
is a host controller device.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

One of the USB CV MSC tests issues Get Max LUN request with
invalid wIndex (wIndex = 65535) parameter.

Add proper handling to prevent array index out of bounds issue.
Signed-off-by: NMaulik Mankad <maulik@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Alan's commit 335f8514 introduced
.carrier_raised function in several drivers.  That also means
tty_port_block_til_ready can now suspend the process trying to open the serial
port when Carrier Detect is low and put it into tty_port.open_wait queue.  We
need to wake up the process when Carrier Detect goes high and trigger TTY
hangup when CD goes low.

Some of the devices do not report modem status line changes, or at least we
don't understand the status message, so for those we remove .carrier_raised
again.
Signed-off-by: NLibor Pechacek <lpechacek@suse.cz>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix a bug where only half the number of endpoints supported by the
hardware are exposed to gadget.  If DEN filed in the DCCPARAMS
register has 'N' then 'N' IN endpoints and 'N" OUT endpoints can be
supported.  But only 'N' bidirectional endpoints are added to the
gadget ep_list.  This patch also ensures that the data and handshake
transactions of previous setup packet are flushed upon a new setup
packet arrival on ep0.
Signed-off-by: NPavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't call gadget driver's unbind when bind is failed.  Initialize
udc->driver only after gadget driver bind is successful.  Otherwise
pull-up can be enabled upon VBUS session even when no gadget is
bounded.
Signed-off-by: NPavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When removing a serial gadget driver, the kernel warning message is outputted.
This patch fixed this issue.

The pch_udc driver did not have disconnection processing of gadget.
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I found the original patch on the db0fhn repeater wiki (couldn't find the email
of the origial author) I guess it was never commited.
I updated and added some Icom HAM-radio devices to the ftdi driver.
Added extra comments to make clear what devices it are.
Signed-off-by: NPieter Maes <maescool@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for setting CHRGVBUS to workaround a hardware bug on efika mx/sb
boards.
See http://lists.infradead.org/pipermail/linux-arm-kernel/2011-January/037341.htmlSigned-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

commit 711669e5 fixed port 0 support
for i.MX51 but broke it for (at least) i.MX27 which doesn't have
a usb_phy1 clock but has a pdev->id 0.
Signed-off-by: NEric Bénard <eric@eukrea.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added 0x0307 device id to support Motorola cables to the pl2303 usb
serial driver. This cable has a modified chip that is a pl2303, but
declares itself as 0307. Fixed by adding the right device id to the
supported devices list, assigning it the code labeled
PL2303_PRODUCT_ID_MOTOROLA.
Signed-off-by: NDario Lombardo <dario.lombardo@libero.it>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

/drivers/usb/serial/option.c: Adding support for Cinterion's HC25, HC28,
HC28J, EU3-E, EU3-P and PH8 by correcting/adding Cinterion's and
Siemens' Vendor IDs as well as Product IDs and USB_DEVICE tuples
Signed-off-by: NNicolaus Colberg <nicolaus.colberg@cinterion.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1443) fixes a bug found in many of the USB serial
drivers: They don't set the .usb_driver field in their
usb_serial_driver structure.  This field is needed for assigning
dynamic IDs for device matching.

In addition, starting with the 2.6.37 kernel, the .usb_driver field is
needed for proper autosuspend operation.  Without it, attempts to open
the device file will fail.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NDan Williams <dcbw@redhat.com>
CC: <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Previously a check was done on an ID register at the base of a CPU's
internal USB registers to determine if system interface regsiters were
present.  The check looked for an ID register that had the format
ID[0:5] == ~ID[8:13] as described in the MPC5121 User's Manual to
determine if a MPC5121 or MPC83xx/85xx was being used.

There are two issues with this method:
- The ID register is not defined on the MPC83xx/85xx CPUs, so its
  unclear what is being checked on them.
- Newer CPUs such as the P4080 also don't document the ID register, but
  do share the same format as the MPC5121.  Thus the previous code did
  not set 'have_sysif_regs' properly which results in the P4080 not
  properly initializing its USB ports.

Using the device tree 'compatible' node is a cleaner way to determine if
'have_sysif_regs' should be set and resolves the USB initialization issue
seen on the P4080.

Tested on a P4080-based system and compile tested on mpc512x_defconfig
with Freescale EHCI driver enabled.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1442) fixes a bug in g_printer: Module parameters should
not be marked "__initdata" if they are accessible in sysfs (i.e., if
the mode value in the module_param() macro is nonzero).  Otherwise
attempts to access the parameters will cause addressing violations.

Character-string module parameters must not be marked "__initdata"
if the module can be unloaded, because the kernel needs to access the
parameter variable at unload time in order to free the
dynamically-allocated string.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Roland Kletzing <devzero@web.de>
CC: Craig W. Nadler <craig@nadler.us>
CC: <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1441) fixes a bug in g_printer.  The gadget driver, char
device number, and class device should be unregistered in reverse
order of registration.  As it is now, when the module is unloaded the
class device gets unregistered first, causing a crash when the unbind
method tries to access it.

This fixes Bugzilla #25882.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Roland Kletzing <devzero@web.de>
CC: Craig W. Nadler <craig@nadler.us>
CC: <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit ecc1624a (USB: misc: uss720.c: add
another vendor/product ID) duplicated entry in the driver's USB device ID
table.  Remove the duplicate.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1440) fixes a bug in ehci-hcd.  ehci->periodic_size is
used to compute the size in a dma_alloc_coherent() call, but then it
gets changed later on.  As a result, the corresponding call to
dma_free_coherent() passes a different size from the original
allocation.  Fix the problem by adjusting ehci->periodic_size before
carrying out any of the memory allocations.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NLarry Finger <Larry.Finger@lwfinger.net>
CC: David Brownell <david-b@pacbell.net>
CC: <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Support new device OKI SEMICONDUCTOR's ML7213 IOH(Input/Output Hub) which is for
IVI(In-Vehicle Infotainment) use.
The ML7213 is companion chip for Intel Atom E6xx series.
The ML7213 is completely compatible for Intel EG20T PCH.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This PCH_UDC driver does not work normally when "Serial gadget" is used.
The receiving data of control transmission (EP0 Control OUT Transaction)
has not received correctly.

This patch fixed this issue.
The following was modified.
 - The buffer size.
 - The change processing of a receiving buffer
   (The temporary buffer and the buffer prepared by gadget).
 - The setup processing of a DMA descriptor.

Currently the PCH_UDC driver can work normally with "Serial gadget"
or "File-backed Storage Gadget".
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>