- 02 5月, 2008 6 次提交
-
-
由 Harvey Harrison 提交于
drivers/virtio/virtio_pci.c:148:2: warning: returning void-valued expression drivers/virtio/virtio_pci.c:155:2: warning: returning void-valued expression Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
get_buf() gives the length written by the other side, which will be zero. We want to add the skb length. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
A corrupt virtqueue (caused by the other end screwing up) can have strange results such as a driver spinning: just bail when we try to get a buffer from a known-broken queue. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jared Hulbert 提交于
Adding the ability to get a physical address from point() in addition to virtual address. This physical address is required for XIP of userspace code from flash. Signed-off-by: NJared Hulbert <jaredeh@gmail.com> Reviewed-by: NJörn Engel <joern@logfs.org> Acked-by: NNicolas Pitre <nico@cam.org> Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Stefan Richter 提交于
Makes the good-by message more informative. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NJarod Wilson <jwilson@redhat.com>
-
由 Stefan Richter 提交于
Regression since "ieee1394: prevent device binding of raw1394, video1394, dv1394", commit d2ace29f: $ cat /sys/bus/ieee1394/drivers/raw1394/device_ids triggers a NULL pointer dereference in fw_show_drv_device_ids. Reported by Miles Lane. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: NMiles Lane <miles.lane@gmail.com>
-
- 01 5月, 2008 33 次提交
-
-
由 Sebastian Siewior 提交于
It's easy: grab locks before talking to hardware and realease them afterwards. The one big lock has been splitted into a hw_lock and mii_lock. Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sebastian Siewior 提交于
linux-2.6-mk68/drivers/net/fec.c: In function 'fec_enet_module_init': linux-2.6-mk68/drivers/net/fec.c:2627: warning: unused variable 'j' linux-2.6-mk68/drivers/net/fec.c: At top level: linux-2.6-mk68/drivers/net/fec.c:2136: warning: 'mii_link_interrupt' defined but not used Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Remove the acquisition of unused interrupt types. We don't need to register all the TX and RX varients used on some ColdFire FEC hardware. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Renamed the 5272 hash_table registers to match the "grp" hash_table registers of the other ColdFire parts. They are actually a group hash. The makes for consistent setup across all ColdFire parts. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
drivers/scsi/mvsas.c: In function `mvs_update_phyinfo': drivers/scsi/mvsas.c:2822: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/mvsas.c:2822: warning: long long unsigned int format, u64 arg (arg 6) We do not know what type the arch uses to implement u64. Cc: Ke Wei <kewei@marvell.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
drivers/scsi/ncr53c8xx.c: In function 'process_waiting_list': drivers/scsi/ncr53c8xx.c:8225: warning: suggest parentheses around assignment used as truth value recently added by commit 172c122d Author: Harvey Harrison <harvey.harrison@gmail.com> Date: Mon Apr 28 16:50:03 2008 -0700 scsi: fix integer as NULL pointer warnings Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Repair the effects of commit 55da7789 Author: Alan Cox <alan@lxorguk.ukuu.org.uk> Date: Wed Apr 30 00:54:07 2008 -0700 synclink series: switch to int put_char method Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Jiri Slaby <jirislaby@gmail.com> drivers/char/synclink_gt.c: In function 'put_char': drivers/char/synclink_gt.c:919: warning: 'ret' may be used uninitialized in this function and do some whitespace repair and unneeded-cast-removal in there as well. Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Travis 提交于
Change cpu_sys_devices from array to per_cpu variable in drivers/base/cpu.c. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Denis V. Lunev 提交于
Simply replace proc_create and further data assigned with proc_create_data. Signed-off-by: NDenis V. Lunev <den@openvz.org> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Acked-by: NMike Miller <mike.miller@hp.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Newton 提交于
Add support for pca9555 I2C I/O expander. As the comment suggests this part is software compatible with the pca9539. Signed-off-by: NWill Newton <will.newton@imgtec.com> Cc: "eric miao" <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
On Fri, Apr 18, 2008 at 09:08:55PM +0200, Julia Lawall wrote: > I found 63 occurrences of this problem with the following semantic match > (http://www.emn.fr/x-info/coccinelle/): > > @@ unsigned int i; @@ > > * i < 0 > Since this one's always in the range 0-255, it could probably be made signed, but it's just as easy to make it work unsigned. Reported-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vitja Makarov 提交于
Use PIO for full-duplex transfers, instead of DMA. Signed-off-by: NVitja Makarov <vitja.makarov@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Scott Kilau 提交于
Add new PCI Express Neo/JSM board to the supported list of drivers in the JSM driver. Signed-off-by: NScott Kilau <scottk@digi.com> Acked-by: NAnanda V <avenkat@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jochen Eisinger 提交于
The i8k driver multiplies the fan speed reported by the BIOS with a factor of 30. On my Dell Latitude D800, this factor is not required. I'd suggest to make this configurable. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
next-20080430/drivers/pnp/pnpbios/rsparser.c:594: warning: format '%d' expects type 'int', but argument 4 has type 'resource_size_t' next-20080430/drivers/pnp/pnpbios/rsparser.c:605: warning: format '%d' expects type 'int', but argument 4 has type 'resource_size_t' [joe@perches.com: fix it] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthias Kaehlcke 提交于
Alchemy Semi Au1000 pcmcia driver: The semaphore pcmcia_sockets_lock is used as a mutex, convert it to the mutex API (akpm: make it static too) Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
cb_alloc() uses a function (pci_scan_slot) that will be annotated __devinit. Annotate cb_alloc() with __ref to tell modpost to ignore this reference. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
Silence following warnings: WARNING: drivers/pcmcia/built-in.o(.data+0x14e0): Section mismatch in reference from the variable pd6729_pci_drv to the function .devinit.text:pd6729_pci_probe() WARNING: drivers/pcmcia/built-in.o(.data+0x14e8): Section mismatch in reference from the variable pd6729_pci_drv to the function .devexit.text:pd6729_pci_remove() WARNING: drivers/pcmcia/built-in.o(.data+0x16c0): Section mismatch in reference from the variable i82092aa_pci_drv to the function .devinit.text:i82092aa_pci_probe() WARNING: drivers/pcmcia/built-in.o(.data+0x16c8): Section mismatch in reference from the variable i82092aa_pci_drv to the function .devexit.text:i82092aa_pci_remove() Rename the variables from *_drv to *_driver so modpost ignore the OK references to __devinit/__devexit functions. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
Silence the following warnings: WARNING: drivers/pcmcia/built-in.o(.data+0x6e8): Section mismatch in reference from the variable pcmcia_bus_interface to the function .devinit.text:pcmcia_bus_add_socket() WARNING: drivers/pcmcia/built-in.o(.data+0xa88): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devinit.text:pccard_sysfs_add_rsrc() WARNING: drivers/pcmcia/built-in.o(.data+0xa90): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devexit.text:pccard_sysfs_remove_rsrc() The variables of type class_interface contains references to __devinit and __devexit functions which is OK. Silence warnings by annotating the variables with __refdata. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
x86.git randconfig testing found the following build error in latest -git: CC [M] drivers/isdn/hysdn/hysdn_procconf.o CC [M] drivers/isdn/hysdn/hysdn_init.o drivers/isdn/hysdn/hysdn_procconf.c: In function 'hysdn_procconf_init': drivers/isdn/hysdn/hysdn_procconf.c:408: error: too few arguments to function 'proc_create' with the following config: http://redhat.com/~mingo/misc/config-Wed_Apr_30_15_12_48_CEST_2008.badSigned-off-by: NIngo Molnar <mingo@elte.hu> Cc: "Denis V. Lunev" <den@openvz.org> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roman Zippel 提交于
x86 is the only arch right now, which provides an optimized for div_long_long_rem and it has the downside that one has to be very careful that the divide doesn't overflow. The API is a little akward, as the arguments for the unsigned divide are signed. The signed version also doesn't handle a negative divisor and produces worse code on 64bit archs. There is little incentive to keep this API alive, so this converts the few users to the new API. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
On Thursday 01 May 2008, Jeremy Kerr wrote: > Hi all, > > On QS20 Cell machines, Linus' current git tree explodes on boot: > > SiI680: IDE controller (0x1095:0x0680 rev 0x02) at PCI slot > 0000:00:0a.0 > SiI680: BASE CLOCK == 133 > SiI680: 100% native mode on irq 51 > ide0: MMIO-DMA > ide1: MMIO-DMA > Unable to handle kernel paging request for data at address > 0xa000100081220080 > Faulting instruction address: 0xc000000000024748 > cpu 0x2: Vector: 300 (Data Access) at [c00000001e143420] > pc: c000000000024748: ._insw_ns+0x10/0x30 > lr: c000000000037fc4: .spiderpci_readsw+0x24/0x6c > sp: c00000001e1436a0 > msr: 9000000000001032 > dar: a000100081220080 > dsisr: 40000000 > current = 0xc00000003d060000 > paca = 0xc000000000623880 > pid = 1, comm = swapper > enter ? for help > [link register ] c000000000037fc4 .spiderpci_readsw+0x24/0x6c > [c00000001e1436a0] c00000000062ce63 (unreliable) > [c00000001e143730] c0000000000379d4 .iowa_readsw+0x78/0xa8 > [c00000001e1437c0] c000000000037a98 .iowa_insw+0x94/0xd4 > [c00000001e143850] c00000000022a190 .ata_input_data+0x298/0x2ec > [c00000001e143910] c00000000022b600 .try_to_identify+0x2c0/0x6d4 > [c00000001e1439d0] c00000000022bb54 .do_probe+0x140/0x35c > [c00000001e143a80] c00000000022bfbc .ide_probe_port+0x24c/0x670 > [c00000001e143b50] c00000000022d09c .ide_device_add_all+0x2ec/0x690 > [c00000001e143c00] c00000000022d4a4 .ide_device_add+0x64/0x74 > [c00000001e143c90] c00000000022f834 .ide_setup_pci_device+0x58/0x7c > [c00000001e143d30] c00000000038bdf8 > [c00000001e143e10] c000000000486fb0 .ide_scan_pcibus+0x8c/0x178 > [c00000001e143ea0] c000000000460c00 .kernel_init+0x1c4/0x344 > [c00000001e143f90] c000000000024a1c .kernel_thread+0x4c/0x68 > > It looks like we're trying to do PIO accesses (which appear to be > broken, but that's another issue) to this MMIO device. In > ata_input_data, we see that: > > u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; > > Gives mmio == 0. > > (what's the difference between hwif->mmio and ID_HFLAG_MMIO?) > > In the siimage driver, hwif->host flags is initially set up correctly > (host_flags includes IDE_HFLAG_MMIO), but we then *clear* this bit in > ide_init_port: > > hwif->host_flags = d->host_flags; > > where d is the struct ide_port_info for this chipset. In my case, > d->host_flags is 0x0. It looks like this will be the same for all of > the siimage chipsets. Don't over-write hwif->host_flags in ide_init_port(), some host drivers set IDE_HFLAG_MMIO or IDE_HFLAG_NO_IO_32BIT host flag early. Thanks to Jeremy Kerr for the excellent analysis of the bug. Reported-by: NJeremy Kerr <jk@ozlabs.org> Tested-by: NJeremy Kerr <jk@ozlabs.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Make the PCMCIA core stop using class_interface to hide socket attribute registration. This removes the associated section mismatch warnings, and helps get to the point where that mechanism can finally be removed. Simplify that attribute registration by using an attribute_group. This is a net shrink in object size. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stas Sergeev 提交于
Currently an attempt to register multiple drivers with the same name causes the stack trace with some cryptic error message. The attached patch adds the necessary check and the clear error message. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alexey Dobriyan 提交于
acpi_device_dir() is NULL until all files are createst, so everyting is created in straight in /proc/ and creation code warns. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
The switch of ioremap to default to uncached doesn't break this driver but it does needlessly slow it down as BIOS space is cachable and this driver is quite happy scanning cached ROM space. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Venkatesh Pallipadi 提交于
acpi_processor_idle and "idle=" boot parameter interaction is broken. The problem is that, at boot time acpi driver is checking for "idle=" boot option and not registering the acpi idle handler. But, when there is a CST changed callback (typically when switching AC <-> battery or suspend-resume) there are no checks for boot_option_idle_override and acpi idle handler tries to get installed with nasty side effects. With CPU_IDLE configured this issue causes results in a nasty oops on CST change callback and without CPU_IDLE there is no oops, but boot option of "idle=" gets ignored and acpi idle handler gets installed. Change the behavior to not do anything in acpi idle handler when there is a "idle=" boot option. Note that the problem is only there when "idle=" boot option is used. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Sam Ravnborg 提交于
Fix following section mismatch warning: WARNING: vmlinux.o(.text+0x153d69): Section mismatch in reference from the function is_exclusive_device() to the variable .init.data:excluded_id_list is_exclusive_device is only used from __init context so document this with the __init annotation and get rid of the warning. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 30 4月, 2008 1 次提交
-
-
由 Ingo Molnar 提交于
x86.git randconfig testing found a build failure on latest -git: drivers/built-in.o: In function `set_type': tuner-core.c:(.text+0x2a9a26): undefined reference to `tea5761_attach' tuner-core.c:(.text+0x2a9d05): undefined reference to `tda9887_attach' tuner-core.c:(.text+0x2a9d51): undefined reference to `xc2028_attach' tuner-core.c:(.text+0x2a9e22): undefined reference to `tda829x_attach' tuner-core.c:(.text+0x2a9e3f): undefined reference to `microtune_attach' drivers/built-in.o: In function `tuner_probe': tuner-core.c:(.text+0x2aa18a): undefined reference to `tda829x_probe' tuner-core.c:(.text+0x2aa302): undefined reference to `tea5761_autodetection' with the following config: http://redhat.com/~mingo/misc/config-Wed_Apr_30_10_21_40_CEST_2008.bad the problem is caused by the drivers/media/common/tuners/ subdirectory not being part of the kbuild hierarchy anymore, due to commit 7c91f062 ("V4L/DVB(7767): Move tuners to common/tuners"). this seems similar to the problem also reported by Mike Galbraith. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-