Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 17 2月, 2010 1 次提交
  3. 09 2月, 2010 1 次提交
  5. 15 1月, 2010 1 次提交
  7. 18 12月, 2009 2 次提交
  9. 15 12月, 2009 1 次提交
  11. 24 11月, 2009 2 次提交
  13. 30 10月, 2009 1 次提交
  15. 27 10月, 2009 1 次提交
  17. 24 9月, 2009 1 次提交
  19. 11 9月, 2009 1 次提交
  21. 20 8月, 2009 3 次提交
    • B
      powerpc: Remove use of a second scratch SPRG in STAB code · c5a8c0c9
      由 Benjamin Herrenschmidt 提交于 
      The STAB code used on Power3 and RS/64 uses a second scratch SPRG to
save a GPR in order to decide whether to go to do_stab_bolted_* or
to handle a normal data access exception.

This prevents our scheme of freeing SPRG3 which is user visible for
user uses since we cannot use SPRG0 which, on RS/64, seems to be
read-only for supervisor mode (like POWER4).

This reworks the STAB exception entry to use the PACA as temporary
storage instead.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      c5a8c0c9
    • B
      powerpc: Use names rather than numbers for SPRGs (v2) · ee43eb78
      由 Benjamin Herrenschmidt 提交于 
      The kernel uses SPRG registers for various purposes, typically in
low level assembly code as scratch registers or to hold per-cpu
global infos such as the PACA or the current thread_info pointer.

We want to be able to easily shuffle the usage of those registers
as some implementations have specific constraints realted to some
of them, for example, some have userspace readable aliases, etc..
and the current choice isn't always the best.

This patch should not change any code generation, and replaces the
usage of SPRN_SPRGn everywhere in the kernel with a named replacement
and adds documentation next to the definition of the names as to
what those are used for on each processor family.

The only parts that still use the original numbers are bits of KVM
or suspend/resume code that just blindly needs to save/restore all
the SPRGs.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      ee43eb78
    • B
      powerpc: Rename exception.h to exception-64s.h · 8aa34ab8
      由 Benjamin Herrenschmidt 提交于 
      The file include/asm/exception.h contains definitions
that are specific to exception handling on 64-bit server
type processors.

This renames the file to exception-64s.h to reflect that
fact and avoid confusion.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      8aa34ab8
  23. 15 6月, 2009 2 次提交
  25. 21 5月, 2009 1 次提交
  27. 15 5月, 2009 1 次提交
  29. 12 5月, 2009 1 次提交
    • A
      viocd: needs to depend on BLOCK · 05dc7b61
      由 Alexander Beregalov 提交于 
      Fix this build error when CONFIG_BLOCK is not set:
drivers/cdrom/viocd.c: In function 'viocd_blk_open':
drivers/cdrom/viocd.c:156: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_release':
drivers/cdrom/viocd.c:162: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_ioctl':
drivers/cdrom/viocd.c:170: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_media_changed':
drivers/cdrom/viocd.c:176: error: dereferencing pointer to incomplete type
...
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      05dc7b61
  31. 07 4月, 2009 1 次提交
  33. 11 3月, 2009 3 次提交
  35. 13 1月, 2009 1 次提交
  37. 08 1月, 2009 2 次提交
  39. 21 12月, 2008 1 次提交
    • S
      powerpc/iseries: viodasd needs to depend on CONFIG_BLOCK · 5d84e4be
      由 Stephen Rothwell 提交于 
      Otherwise you get lot of errors like these:

drivers/block/viodasd.c:72: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_open':
drivers/block/viodasd.c:135: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_release':
drivers/block/viodasd.c:184: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_getgeo':
drivers/block/viodasd.c:209: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c:214: error: implicit declaration of function 'get_capacity'
drivers/block/viodasd.c: At top level:
drivers/block/viodasd.c:222: error: variable 'viodasd_fops' has initializer but incomplete type
drivers/block/viodasd.c:223: error: unknown field 'owner' specified in initializer

Discovered by a randconfig build.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      5d84e4be
  41. 31 10月, 2008 1 次提交
    • M
      powerpc: Update remaining dma_mapping_ops to use map/unmap_page · f9226d57
      由 Mark Nelson 提交于 
      After the merge of the 32 and 64bit DMA code, dma_direct_ops lost
their map/unmap_single() functions but gained map/unmap_page().  This
caused a problem for Cell because Cell's dma_iommu_fixed_ops called
the dma_direct_ops if the fixed linear mapping was to be used or the
iommu ops if the dynamic window was to be used.  So in order to fix
this problem we need to update the 64bit DMA code to use
map/unmap_page.

First, we update the generic IOMMU code so that iommu_map_single()
becomes iommu_map_page() and iommu_unmap_single() becomes
iommu_unmap_page().  Then we propagate these changes up through all
the callers of these two functions and in the process update all the
dma_mapping_ops so that they have map/unmap_page rahter than
map/unmap_single.  We can do this because on 64bit there is no HIGHMEM
memory so map/unmap_page ends up performing exactly the same function
as map/unmap_single, just taking different arguments.

This has no affect on drivers because the dma_map_single_attrs() just
ends up calling the map_page() function of the appropriate
dma_mapping_ops and similarly the dma_unmap_single_attrs() calls
unmap_page().

This fixes an oops on Cell blades, which oops on boot without this
because they call dma_direct_ops.map_single, which is NULL.
Signed-off-by: NMark Nelson <markn@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      f9226d57
  43. 16 9月, 2008 1 次提交
    • P
      powerpc: Use LOAD_REG_IMMEDIATE only for constants on 64-bit · e31aa453
      由 Paul Mackerras 提交于 
      Using LOAD_REG_IMMEDIATE to get the address of kernel symbols
generates 5 instructions where LOAD_REG_ADDR can do it in one,
and will generate R_PPC64_ADDR16_* relocations in the output when
we get to making the kernel as a position-independent executable,
which we'd rather not have to handle.  This changes various bits
of assembly code to use LOAD_REG_ADDR when we need to get the
address of a symbol, or to use suitable position-independent code
for cases where we can't access the TOC for various reasons, or
if we're not running at the address we were linked at.

It also cleans up a few minor things; there's no reason to save and
restore SRR0/1 around RTAS calls, __mmu_off can get the return
address from LR more conveniently than the caller can supply it in
R4 (and we already assume elsewhere that EA == RA if the MMU is on
in early boot), and enable_64b_mode was using 5 instructions where
2 would do.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      e31aa453
  45. 20 8月, 2008 1 次提交
  47. 08 8月, 2008 1 次提交
  49. 27 7月, 2008 1 次提交
    • F
      dma-mapping: add the device argument to dma_mapping_error() · 8d8bb39b
      由 FUJITA Tomonori 提交于 
      Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER
architecture does:

This enables us to cleanly fix the Calgary IOMMU issue that some devices
are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).

I think that per-device dma_mapping_ops support would be also helpful for
KVM people to support PCI passthrough but Andi thinks that this makes it
difficult to support the PCI passthrough (see the above thread).  So I
CC'ed this to KVM camp.  Comments are appreciated.

A pointer to dma_mapping_ops to struct dev_archdata is added.  If the
pointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it's
NULL, the system-wide dma_ops pointer is used as before.

If it's useful for KVM people, I plan to implement a mechanism to register
a hook called when a new pci (or dma capable) device is created (it works
with hot plugging).  It enables IOMMUs to set up an appropriate
dma_mapping_ops per device.

The major obstacle is that dma_mapping_error doesn't take a pointer to the
device unlike other DMA operations.  So x86 can't have dma_mapping_ops per
device.  Note all the POWER IOMMUs use the same dma_mapping_error function
so this is not a problem for POWER but x86 IOMMUs use different
dma_mapping_error functions.

The first patch adds the device argument to dma_mapping_error.  The patch
is trivial but large since it touches lots of drivers and dma-mapping.h in
all the architecture.

This patch:

dma_mapping_error() doesn't take a pointer to the device unlike other DMA
operations.  So we can't have dma_mapping_ops per device.

Note that POWER already has dma_mapping_ops per device but all the POWER
IOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device
argument.

[akpm@linux-foundation.org: fix sge]
[akpm@linux-foundation.org: fix svc_rdma]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix bnx2x]
[akpm@linux-foundation.org: fix s2io]
[akpm@linux-foundation.org: fix pasemi_mac]
[akpm@linux-foundation.org: fix sdhci]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix sparc]
[akpm@linux-foundation.org: fix ibmvscsi]
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8d8bb39b
  51. 25 7月, 2008 1 次提交
    • R
      powerpc/pseries: iommu enablement for CMO · 6490c490
      由 Robert Jennings 提交于 
      To support Cooperative Memory Overcommitment (CMO), we need to check
for failure from some of the tce hcalls.

These changes for the pseries platform affect the powerpc architecture;
patches for the other affected platforms are included in this patch.

pSeries platform IOMMU code changes:
 * platform TCE functions must handle H_NOT_ENOUGH_RESOURCES errors and
   return an error.

Architecture IOMMU code changes:
 * Calls to ppc_md.tce_build need to check return values and return
   DMA_MAPPING_ERROR for transient errors.

Architecture changes:
 * struct machdep_calls for tce_build*_pSeriesLP functions need to change
   to indicate failure.
 * all other platforms will need updates to iommu functions to match the new
   calling semantics; they will return 0 on success.  The other platforms
   default configs have been built, but no further testing was performed.
Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      6490c490
  53. 22 7月, 2008 1 次提交
  55. 19 7月, 2008 1 次提交
    • T
      nohz: prevent tick stop outside of the idle loop · b8f8c3cf
      由 Thomas Gleixner 提交于 
      Jack Ren and Eric Miao tracked down the following long standing
problem in the NOHZ code:

	scheduler switch to idle task
	enable interrupts

Window starts here

	----> interrupt happens (does not set NEED_RESCHED)
	      	irq_exit() stops the tick

	----> interrupt happens (does set NEED_RESCHED)

	return from schedule()
	
	cpu_idle(): preempt_disable();

Window ends here

The interrupts can happen at any point inside the race window. The
first interrupt stops the tick, the second one causes the scheduler to
rerun and switch away from idle again and we end up with the tick
disabled.

The fact that it needs two interrupts where the first one does not set
NEED_RESCHED and the second one does made the bug obscure and extremly
hard to reproduce and analyse. Kudos to Jack and Eric.

Solution: Limit the NOHZ functionality to the idle loop to make sure
that we can not run into such a situation ever again.

cpu_idle()
{
	preempt_disable();

	while(1) {
		 tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we
		 			          are in the idle loop

		 while (!need_resched())
		       halt();

		 tick_nohz_restart_sched_tick(); <- disables NOHZ mode
		 preempt_enable_no_resched();
		 schedule();
		 preempt_disable();
	}
}

In hindsight we should have done this forever, but ... 

/me grabs a large brown paperbag.

Debugged-by: Jack Ren <jack.ren@marvell.com>, 
Debugged-by: Neric miao <eric.y.miao@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      b8f8c3cf
  57. 17 7月, 2008 1 次提交
    • J
      powerpc: pci config cleanup · b500563b
      由 John Rigby 提交于 
      Choosing PCI or not at config time is allowed on some
platforms via an if expression in arch/powerpc/Kconfig.
To add a new platform with PCI support selectable at
config time, you must change the if expression.  This
patch makes this easier by changing:
    bool "PCI support" if <long expression>
to
    bool "PCI support" if PPC_PCI_CHOICE
and adding select PPC_PCI_CHOICE to all the config nodes that
were previously in the PCI if expression.

Platforms with unconditional PCI support continue to
just select PCI in their config nodes.
Signed-off-by: NJohn Rigby <jrigby@freescale.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      b500563b
  59. 09 7月, 2008 1 次提交
  61. 29 4月, 2008 1 次提交
  63. 24 4月, 2008 1 次提交