- 20 4月, 2010 1 次提交
-
-
由 Daniel Vetter 提交于
When drivers embed the core gem object into their own structures, they'll have to do this. Temporarily this results in an ugly kfree(gem_obj); in every gem driver. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 4月, 2010 1 次提交
-
-
由 Francisco Jerez 提交于
Previously we were filling it the same as "placements", but in some cases there're valid alternatives that we were ignoring completely. Keeping a back-up memory type helps on several low-mem situations. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 08 4月, 2010 1 次提交
-
-
由 Jerome Glisse 提交于
There is case where we want to be able to wait only for the GPU while not waiting for other buffer to be unreserved. This patch split the no_wait argument all the way down in the whole ttm path so that upper level can decide on what to wait on or not. [airlied: squashed these 4 for bisectability reasons.] drm/radeon/kms: update to TTM no_wait splitted argument drm/nouveau: update to TTM no_wait splitted argument drm/vmwgfx: update to TTM no_wait splitted argument [vmwgfx patch: Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>] Signed-off-by: NJerome Glisse <jglisse@redhat.com> Acked-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 25 2月, 2010 4 次提交
-
-
由 Luca Barbieri 提交于
Found by sparse. Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This commit breaks the userspace interface, and requires a new libdrm for nouveau to operate again. The multiple GEM_PUSHBUF ioctls that were present in 0.0.15 for compatibility purposes are now gone, and replaced with the new ioctl which allows for multiple push buffers to be submitted (necessary for hw index buffers in the nv50 3d driver) and relocations to be applied on any buffer. A number of other ioctls (CARD_INIT, GEM_PIN, GEM_UNPIN) that were needed for userspace modesetting have also been removed. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
PFIFO on G80 and up has a new mode where the main ring buffer is simply a ring of pointers to indirect buffers containing the actual command/data packets. In order to be able to implement index buffers in the 3D driver we need to be able to submit data-only push buffers right after the cmd packet header, which is only possible using the new command submission method. This commit doesn't make it possible to implement index buffers yet, some userspace interface changes will be required, but it does allow for testing/debugging of the hardware-side support in the meantime. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 11 2月, 2010 1 次提交
-
-
由 Luca Barbieri 提交于
Mostly obvious simplifications. The i915 pread/pwrite ioctls, intel_overlay_put_image and nouveau_gem_new were incorrectly using the locked versions without locking: this is also fixed in this patch. Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 2月, 2010 1 次提交
-
-
由 Luca Barbieri 提交于
nouveau_gem_ioctl_cpu_prep calls ttm_bo_wait without the bo lock held. ttm_bo_wait unlocks that lock, and so must be called with it held. Currently this bug causes libdrm nouveau_bo_busy() to hang the machine. Signed-off-by: Luca Barbieri <luca at luca-barbieri.com> Acked-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 25 1月, 2010 1 次提交
-
-
由 Ben Skeggs 提交于
We need to add the buffer to the list even if we fail, otherwise the validate_fini() call won't unreserve + unreference the GEM object, making TTM very unhappy. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 15 1月, 2010 1 次提交
-
-
由 Luca Barbieri 提交于
Currently there is no check that the pushbuffer request bounds are inside the TTM BO. This allows to instruct the kernel to do relocations on user-selected addresses, since the relocation bounds checking relies on the request bounds. This can oops the kernel accidentally and is easily exploitable. This patch adds bound checking and alignment checking for ->offset and ->nr_dwords. It also makes some variables unsigned, which should have no effect, but prevents possible bounds checking problems. Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 11 1月, 2010 2 次提交
-
-
由 Luca Barbieri 提交于
Currently Nouveau will unvalidate all buffers if it is forced to wait on one, and then start revalidating from the beginning. While doing so, it destroys the operation fence, causing nouveau_fence_emit to crash. This patch fixes this bug by taking the fence object out of validate_op and creating it just before emit. The fence pointer is initialized to 0 and unref'ed unconditionally. In addition to fixing the bug, this prevents its reintroduction and simplifies the code. Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Luca Barbieri 提交于
Currently Nouveau will unvalidate all buffers if it is forced to wait on one, and then start revalidating from the beginning. While doing so, it destroys the operation fence, causing nouveau_fence_emit to crash. This patch fixes this bug by taking the fence object out of validate_op and creating it just before emit. The fence pointer is initialized to 0 and unref'ed unconditionally. In addition to fixing the bug, this prevents its reintroduction and simplifies the code. Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 15 12月, 2009 1 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 11 12月, 2009 1 次提交
-
-
由 Ben Skeggs 提交于
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA. This driver is a KMS-based driver and requires a compatible nouveau userspace libdrm and nouveau X.org driver. This driver requires firmware files not available in this kernel tree, interested parties can find them via the nouveau project git archive. This driver is reverse engineered, and is in no way supported by nVidia. Support for nearly the complete range of nvidia hw from nv04->g80 (nv50) is available, and the kms driver should support driving nearly all output types (displayport is under development still) along with supporting suspend/resume. This work is all from the upstream nouveau project found at nouveau.freedesktop.org. The original authors list from nouveau git tree is: Anssi Hannula <anssi.hannula@iki.fi> Ben Skeggs <bskeggs@redhat.com> Francisco Jerez <currojerez@riseup.net> Maarten Maathuis <madman2003@gmail.com> Marcin Kościelnicki <koriakin@0x04.net> Matthew Garrett <mjg@redhat.com> Matt Parnell <mparnell@gmail.com> Patrice Mandin <patmandin@gmail.com> Pekka Paalanen <pq@iki.fi> Xavier Chantry <shiningxc@gmail.com> along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-