scheduler uses cache_nice_tries as an indicator to do cache_hot and
active load balance, when normal load balance fails. Currently,
this value is changed on any failed load balance attempt. That ends
up being not so nice to workloads that enter/exit idle often, as
they do more frequent new_idle balance and that pretty soon results
in cache hot tasks being pulled in.

Making the cache_nice_tries ignore failed new_idle balance seems to
make better sense. With that only the failed load balance in
periodic load balance gets accounted and the rate of accumulation
of cache_nice_tries will not depend on idle entry/exit (short
running sleep-wakeup kind of tasks). This reduces movement of
cache_hot tasks.

schedstat diff (after-before) excerpt from a workload that has
frequent and short wakeup-idle pattern (:2 in cpu col below refers
to NEWIDLE idx) This snapshot was across ~400 seconds.

Without this change:
domainstats:  domain0
 cpu     cnt      bln      fld      imb     gain    hgain  nobusyq  nobusyg
 0:2  306487   219575    73167  110069413    44583    19070     1172   218403
 1:2  292139   194853    81421  120893383    50745    21902     1259   193594
 2:2  283166   174607    91359  129699642    54931    23688     1287   173320
 3:2  273998   161788    93991  132757146    57122    24351     1366   160422
 4:2  289851   215692    62190  83398383    36377    13680      851   214841
 5:2  316312   222146    77605  117582154    49948    20281      988   221158
 6:2  297172   195596    83623  122133390    52801    21301      929   194667
 7:2  283391   178078    86378  126622761    55122    22239      928   177150
 8:2  297655   210359    72995  110246694    45798    19777     1125   209234
 9:2  297357   202011    79363  119753474    50953    22088     1089   200922
10:2  278797   178703    83180  122514385    52969    22726     1128   177575
11:2  272661   167669    86978  127342327    55857    24342     1195   166474
12:2  293039   204031    73211  110282059    47285    19651      948   203083
13:2  289502   196762    76803  114712942    49339    20547     1016   195746
14:2  264446   169609    78292  115715605    50459    21017      982   168627
15:2  260968   163660    80142  116811793    51483    21281     1064   162596

With this change:
domainstats:  domain0
 cpu     cnt      bln      fld      imb     gain    hgain  nobusyq  nobusyg
 0:2  272347   187380    77455  105420270    24975        1      953   186427
 1:2  267276   172360    86234  116242264    28087        6     1028   171332
 2:2  259769   156777    93281  123243134    30555        1     1043   155734
 3:2  250870   143129    97627  127370868    32026        6     1188   141941
 4:2  248422   177116    64096  78261112    22202        2      757   176359
 5:2  275595   180683    84950  116075022    29400        6      778   179905
 6:2  262418   162609    88944  119256898    31056        4      817   161792
 7:2  252204   147946    92646  122388300    32879        4      824   147122
 8:2  262335   172239    81631  110477214    26599        4      864   171375
 9:2  261563   164775    88016  117203621    28331        3      849   163926
10:2  243389   140949    93379  121353071    29585        2      909   140040
11:2  242795   134651    98310  124768957    30895        2     1016   133635
12:2  255234   166622    79843  104696912    26483        4      746   165876
13:2  244944   151595    83855  109808099    27787        3      801   150794
14:2  241301   140982    89935  116954383    30403        6      845   140137
15:2  232271   128564    92821  119185207    31207        4     1416   127148
Signed-off-by: NVenkatesh Pallipadi <venki@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1284167957-3675-1-git-send-email-venki@google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: Pick up the latest fixes in -rc5.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: vt6655: fix buffer overflow
  Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: musb: MAINTAINERS: Fix my mail address
  USB: serial/mos*: prevent reading uninitialized stack memory
  USB: otg: twl4030: fix phy initialization(v1)
  USB: EHCI: Disable langwell/penwell LPM capability
  usb: musb_debugfs: don't use the struct file private_data field with seq_files

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: mfd: fix bug in serial_hsu_remove()
  serial: amba-pl010: fix set_ldisc

"param->u.wpa_associate.wpa_ie_len" comes from the user.  We should
check it so that the copy_from_user() doesn't overflow the buffer.

Also further down in the function, we assume that if
"param->u.wpa_associate.wpa_ie_len" is set then "abyWPAIE[0]" is
initialized.  To make that work, I changed the test here to say that if
"wpa_ie_len" is set then "wpa_ie" has to be a valid pointer or we return
-EINVAL.

Oddly, we only use the first element of the abyWPAIE[] array.  So I
suspect there may be some other issues in this function.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit 96d592ed.

The netfilter hook seems to be misused and may leak skbs in situations
when NF_HOOK returns NF_STOLEN. It may not filter everything as
expected. Also the ethernet bridge tables are not yet capable to
understand batman-adv packet correctly.

It was only added for testing purposes and can be removed again.
Reported-by: NVasiliy Kulikov <segooon@gmail.com>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Medfield HSU driver deal with 4 pci devices(3 uart ports + 1 dma controller),
so in pci remove func, we need handle them differently
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit d87d9b7d ("tty: serial - fix tty referencing in set_ldisc") changed
set_ldisc to take ldisc number as parameter. This patch fixes AMBA PL010 driver
according the new prototype.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If we don't, contributors to musb and any USB OMAP
code will be sending mails to an unexistent inbox.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The TIOCGICOUNT device ioctl in both mos7720.c and mos7840.c allows
unprivileged users to read uninitialized stack memory, because the
"reserved" member of the serial_icounter_struct struct declared on the
stack is not altered or zeroed before being copied back to the user.
This patch takes care of it.
Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit 461c3177(into 2.6.36-v3)
is put forward to power down phy if no usb cable is connected,
but does introduce the two issues below:

1), phy is not into work state if usb cable is connected
with PC during poweron, so musb device mode is not usable
in such case, follows the reasons:
	-twl4030_phy_resume is not called, so
		regulators are not enabled
		i2c access are not enabled
		usb mode not configurated

2), The kernel warings[1] of regulators 'unbalanced disables'
is caused if poweron without usb cable connected
with PC or b-device.

This patch fixes the two issues above:
	-power down phy only if no usb cable is connected with PC
and b-device
	-do phy initialization(via __twl4030_phy_resume) if usb cable
is connected with PC(vbus event) or another b-device(ID event) in
twl4030_usb_probe.

This patch also doesn't put VUSB3V1 LDO into active mode in
twl4030_usb_ldo_init until VBUS/ID change detected, so we can
save more power consumption than before.

This patch is verified OK on Beagle board either connected with
usb cable or not when poweron.

[1]. warnings of 'unbalanced disables' of regulators.
[root@OMAP3EVM /]# dmesg
------------[ cut here ]------------
WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128()
unbalanced disables for VUSB1V8
Modules linked in:
Backtrace:
[<c0030c48>] (dump_backtrace+0x0/0x110) from [<c034f5a8>] (dump_stack+0x18/0x1c)
 r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d
[<c034f590>] (dump_stack+0x0/0x1c) from [<c0057da8>] (warn_slowpath_common+0x54/0x6c)
[<c0057d54>] (warn_slowpath_common+0x0/0x6c) from [<c0057e64>] (warn_slowpath_fmt+0x38/0x40)
 r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb
 r4:c78e6c00
[<c0057e2c>] (warn_slowpath_fmt+0x0/0x40) from [<c01ed6b8>] (_regulator_disable+0x38/0x128)
 r3:c0410e53 r2:c0410ad5
[<c01ed680>] (_regulator_disable+0x0/0x128) from [<c01ed87c>] (regulator_disable+0x24/0x38)
 r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00
[<c01ed858>] (regulator_disable+0x0/0x38) from [<c02382dc>] (twl4030_phy_power+0x15c/0x17c)
 r5:c78595c0 r4:00000000
[<c0238180>] (twl4030_phy_power+0x0/0x17c) from [<c023831c>] (twl4030_phy_suspend+0x20/0x2c)
 r6:00000000 r5:c78595c0 r4:c78595c0
[<c02382fc>] (twl4030_phy_suspend+0x0/0x2c) from [<c0238638>] (twl4030_usb_irq+0x11c/0x16c)
 r5:c78595c0 r4:00000040
[<c023851c>] (twl4030_usb_irq+0x0/0x16c) from [<c034ec18>] (twl4030_usb_probe+0x2c4/0x32c)
 r6:00000000 r5:00000000 r4:c78595c0
[<c034e954>] (twl4030_usb_probe+0x0/0x32c) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
 r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c78e663c r5:c78e6608 r4:c78e6608
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c021597c>] (platform_device_add+0x110/0x16c)
[<c021586c>] (platform_device_add+0x0/0x16c) from [<c0220cb0>] (add_numbered_child+0xd8/0x118)
 r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000
[<c0220bd8>] (add_numbered_child+0x0/0x118) from [<c001c618>] (twl_probe+0x3a4/0x72c)
[<c001c274>] (twl_probe+0x0/0x72c) from [<c02601ac>] (i2c_device_probe+0x7c/0xa4)
[<c0260130>] (i2c_device_probe+0x0/0xa4) from [<c0214244>] (driver_probe_device+0xd0/0x190)
 r5:c7856e20 r4:c047c860
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c7856e54 r5:c7856e20 r4:c7856e20
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c0211fd8>] (device_register+0x1c/0x20)
[<c0211fbc>] (device_register+0x0/0x20) from [<c0260aa8>] (i2c_new_device+0xec/0x150)
 r5:c7856e00 r4:c7856e20
[<c02609bc>] (i2c_new_device+0x0/0x150) from [<c0260dc0>] (i2c_register_adapter+0xa0/0x1c4)
 r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0
[<c0260d20>] (i2c_register_adapter+0x0/0x1c4) from [<c0260f80>] (i2c_add_numbered_adapter+0x9c/0xb4)
 r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000
[<c0260ee4>] (i2c_add_numbered_adapter+0x0/0xb4) from [<c034efa4>] (omap_i2c_probe+0x324/0x3e8)
 r5:00000000 r4:c78fd000
[<c034ec80>] (omap_i2c_probe+0x0/0x3e8) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c021436c>] (__driver_attach+0x68/0x8c)
 r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0
[<c0214304>] (__driver_attach+0x0/0x8c) from [<c021399c>] (bus_for_each_dev+0x50/0x84)
 r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000
[<c021394c>] (bus_for_each_dev+0x0/0x84) from [<c0214068>] (driver_attach+0x20/0x28)
 r6:c047e214 r5:c047e214 r4:c00270d0
[<c0214048>] (driver_attach+0x0/0x28) from [<c0213274>] (bus_add_driver+0xa8/0x228)
[<c02131cc>] (bus_add_driver+0x0/0x228) from [<c02146a4>] (driver_register+0xb0/0x13c)
[<c02145f4>] (driver_register+0x0/0x13c) from [<c0215744>] (platform_driver_register+0x4c/0x60)
 r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc
r4:c00270d0
[<c02156f8>] (platform_driver_register+0x0/0x60) from [<c001f69c>] (omap_i2c_init_driver+0x14/0x1c)
[<c001f688>] (omap_i2c_init_driver+0x0/0x1c) from [<c002c460>] (do_one_initcall+0xd0/0x1a4)
[<c002c390>] (do_one_initcall+0x0/0x1a4) from [<c0008478>] (kernel_init+0x9c/0x154)
[<c00083dc>] (kernel_init+0x0/0x154) from [<c005b6fc>] (do_exit+0x0/0x688)
 r5:c00083dc r4:00000000
---[ end trace 1b75b31a2719ed1d ]---
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <me@felipebalbi.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We have to do so due to HW limitation.
Signed-off-by: NAlek Du <alek.du@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

seq_files use the private_data field of a file struct for storing a seq_file structure,
data should be stored in seq_file's own private field (e.g. file->private_data->private)
Otherwise seq_release() will free the private data when the file is closed.
Signed-off-by: NMathias Nyman <mathias.nyman@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We need to make sure that only the first do_signal() to be handled on
the way out syscall will bother with syscall restarts; additionally, the
check on the "signal has user handler" path had been wrong - compare
with restart prevention in sigreturn()...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_signal() should place the syscall number in gr7, not gr8 when
handling ERESTART_WOULDBLOCK.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use force_sigsegv() rather than force_sig(SIGSEGV, ...) as the former
resets the SEGV handler pointer which will kill the process, rather than
leaving it open to an infinite loop if the SEGV handler itself caused a
SEGV signal.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

a) sa_handler might be maliciously set to point to kernel memory;
   blindly dereferencing it in FDPIC case is a Bad Idea(tm).

b) I'm not sure you need that set_fs(USER_DS) there at all, but if you
   do, you'd better do it *before* checking the frame you've decided to
   use with access_ok(), lest sigaltstack() becomes a convenient
   roothole.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reset restart_block.fn on executing a sigreturn such that any currently
pending system call restarts will be forced to return -EINTR.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4969c119 ("mm: fix swapin race condition") is now agreed to
be incomplete.  There's a race, not very much less likely than the
original race envisaged, in which it is further necessary to check that
the swapcache page's swap has not changed.

Here's the reasoning: cast in terms of reuse_swap_page(), but probably
could be reformulated to rely on try_to_free_swap() instead, or on
swapoff+swapon.

A, faults into do_swap_page(): does page1 = lookup_swap_cache(swap1) and
comes through the lock_page(page1).

B, a racing thread of the same process, faults on the same address: does
page1 = lookup_swap_cache(swap1) and now waits in lock_page(page1), but
for whatever reason is unlucky not to get the lock any time soon.

A carries on through do_swap_page(), a write fault, but cannot reuse the
swap page1 (another reference to swap1).  Unlocks the page1 (but B
doesn't get it yet), does COW in do_wp_page(), page2 now in that pte.

C, perhaps the parent of A+B, comes in and write faults the same swap
page1 into its mm, reuse_swap_page() succeeds this time, swap1 is freed.

kswapd comes in after some time (B still unlucky) and swaps out some
pages from A+B and C: it allocates the original swap1 to page2 in A+B,
and some other swap2 to the original page1 now in C.  But does not
immediately free page1 (actually it couldn't: B holds a reference),
leaving it in swap cache for now.

B at last gets the lock on page1, hooray! Is PageSwapCache(page1)? Yes.
Is pte_same(*page_table, orig_pte)? Yes, because page2 has now been
given the swap1 which page1 used to have.  So B proceeds to insert page1
into A+B's page_table, though its content now belongs to C, quite
different from what A wrote there.

B ought to have checked that page1's swap was still swap1.
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: deal with multiple simultaneously pending signals
  alpha: fix a 14 years old bug in sigreturn tracing
  alpha: unb0rk sigsuspend() and rt_sigsuspend()
  alpha: belated ERESTART_RESTARTBLOCK race fix
  alpha: Shift perf event pending work earlier in timer interrupt
  alpha: wire up fanotify and prlimit64 syscalls
  alpha: kill big kernel lock
  alpha: fix build breakage in asm/cacheflush.h
  alpha: remove unnecessary cast from void* in assignment.
  alpha: Use static const char * const where possible

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide: Fix ordering of procfs registry.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  dca: disable dca on IOAT ver.3.0 multiple-IOH platforms
  netpoll: Disable IRQ around RCU dereference in netpoll_rx
  sctp: Do not reset the packet during sctp_packet_config().
  net/llc: storing negative error codes in unsigned short
  MAINTAINERS: move atlx discussions to netdev
  drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory
  drivers/net/eql.c: prevent reading uninitialized stack memory
  drivers/net/usb/hso.c: prevent reading uninitialized memory
  xfrm: dont assume rcu_read_lock in xfrm_output_one()
  r8169: Handle rxfifo errors on 8168 chips
  3c59x: Remove atomic context inside vortex_{set|get}_wol
  tcp: Prevent overzealous packetization by SWS logic.
  net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS
  phylib: fix PAL state machine restart on resume
  net: use rcu_barrier() in rollback_registered_many
  bonding: correctly process non-linear skbs
  ipv4: enable getsockopt() for IP_NODEFRAG
  ipv4: force_igmp_version ignored when a IGMPv3 query received
  ppp: potential NULL dereference in ppp_mp_explode()
  net/llc: make opt unsigned in llc_ui_setsockopt()
  ...

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410
  ARM: S3C64XX: Fix coding style errors on mach-real6410
  ARM: S3C64XX: Prototype SPI devices
  ARM: S3C64XX: Fix dev-spi build
  ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstr
  ARM: SAMSUNG: Fix on drive strength value
  ARM: S5PV210: Add FIMC clocks
  ARM: S5PV210: Reduce the iodesc length of systimer
  ARM: S5PV210: Update I2C-1 Clock Register Property.
  ARM: S5P: Decrease IO Registers memory region size on FIMC
  ARM: S5P: Fix DMA coherent mask for FIMC

Coda's REQ_* defines were renamed to avoid clashes with the block layer
(commit 4aeefdc6: "coda: fixup clash with block layer REQ_*
defines").

However one was missed and response messages are no longer matched with
requests and waiting threads are no longer woken up.  This patch fixes
this.
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
[ Also fixed up whitespace while at it  -Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unlike the other targets, alpha sets _one_ sigframe and
buggers off until the next syscall/interrupt, even if
more signals are pending.  It leads to quite a few unpleasant
inconsistencies, starting with SIGSEGV potentially arriving
not where it should and including e.g. mess with sigsuspend();
consider two pending signals blocked until sigsuspend()
unblocks them.  We pick the first one; then, if we are hit
by interrupt while in the handler, we process the second one
as well.  If we are not, and if no syscalls had been made,
we get out of the first handler and leave the second signal
pending; normally sigreturn() would've picked it anyway, but
here it starts with restoring the original mask and voila -
the second signal is blocked again.  On everything else we
get both delivered consistently.

It's actually easy to fix; the only thing to watch out for
is prevention of double syscall restart.  Fortunately, the
idea I've nicked from arm fix by rmk works just fine...

Testcase demonstrating the behaviour in question; on alpha
we get one or both flags set (usually one), on everything
else both are always set.
	#include <signal.h>
	#include <stdio.h>
	int had1, had2;
	void f1(int sig) { had1 = 1; }
	void f2(int sig) { had2 = 1; }
	main()
	{
		sigset_t set1, set2;
		sigemptyset(&set1);
		sigemptyset(&set2);
		sigaddset(&set2, 1);
		sigaddset(&set2, 2);
		signal(1, f1);
		signal(2, f2);
		sigprocmask(SIG_SETMASK, &set2, NULL);
		raise(1);
		raise(2);
		sigsuspend(&set1);
		printf("had1:%d had2:%d\n", had1, had2);
	}
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL,
all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support.

What happens is direct return to ret_from_syscall, in order to bypass
mangling of a3 (error indicator) and prevent other mutilations of
registers (e.g. by syscall restart).  That's fine, but... the entire
TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall
stopping/notifying the tracer is after the syscall.  And the normal
path we are forcibly switching to doesn't have it.

So we end up with *one* stop in traced sigreturn() vs. two in other
syscalls.  And yes, strace is visibly broken by that; try to strace
the following
	#include <signal.h>
	#include <stdio.h>
	void f(int sig) {}
	main()
	{
		signal(SIGHUP, f);
		raise(SIGHUP);
		write(1, "eeeek\n", 6);
	}
and watch the show.  The
	close(1)                                = 405
in the end of strace output is coming from return value of write() (6 ==
__NR_close on alpha) and syscall number of exit_group() (__NR_exit_group ==
405 there).

The fix is fairly simple - the only thing we end up missing is the call
of syscall_trace() and we can tell whether we'd been called from the
SYSCALL_TRACE path by checking ra value.  Since we are setting the
switch_stack up (that's what sys_sigreturn() does), we have the right
environment for calling syscall_trace() - just before we call
undo_switch_stack() and return.  Since undo_switch_stack() will overwrite
s0 anyway, we can use it to store the result of "has it been called from
SYSCALL_TRACE path?" check.  The same thing applies in rt_sigreturn().
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Old code used to set regs->r0 and regs->r19 to force the right
return value.  Leaving that after switch to ERESTARTNOHAND
was a Bad Idea(tm), since now that screws the restart - if we
hit the case when get_signal_to_deliver() returns 0, we will
step back to syscall insn, with v0 set to EINTR and a3 to 1.
The latter won't matter, since EINTR is 4, aka __NR_write.

Testcase:

	#include <signal.h>
	#define _GNU_SOURCE
	#include <unistd.h>
	#include <sys/syscall.h>

	main()
	{
		sigset_t mask;
		sigemptyset(&mask);
		sigaddset(&mask, SIGCONT);
		sigprocmask(SIG_SETMASK, &mask, NULL);
		kill(0, SIGCONT);
		syscall(__NR_sigsuspend, 1, "b0rken\n", 7);
	}

results on alpha in immediate message to stdout...

Fix is obvious; moreover, since we don't need regs anymore, we can
switch to normal prototypes for these guys and lose the wrappers.
Even better, rt_sigsuspend() is identical to generic version in
kernel/signal.c now.
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

same thing as had been done on other targets back in 2003 -
move setting ->restart_block.fn into {rt_,}sigreturn().
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Pending work from the performance event subsystem is executed in
the timer interrupt.  This patch shifts the call to
perf_event_do_pending() before the call to update_process_times()
as the latter may call back into the perf event subsystem and it
is prudent to have the pending work executed first.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This
patch wires them up on Alpha.

Built and booted on an XP900.  Untested beyond that.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

All uses of the BKL on alpha are totally bogus, nothing
is really protected by this. Remove the remaining users
so we don't have to mark alpha as 'depends on BKL'.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Alpha SMP flush_icache_user_range() is implemented as an inline
function inside include/asm/cacheflush.h.  It dereferences @current
but doesn't include linux/sched.h and thus causes build failure if
linux/sched.h wasn't included previously.  Fix it by including the
needed header file explicitly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Acked-by: NJan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Acked-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Direct Cache Access is not supported on IOAT ver.3.0 multiple-IOH platforms.
This patch blocks registering of dca providers when multiple IOH detected with IOAT ver.3.0.
Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add IORESOURCE_IRQ_HIGHLEVEL irq flag to dm9000 driver
platform data in board mach-real6410.
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Fix errors reported by checkpatch.pl script
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Avoids build warnings due to the undeclared non-statics.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>