- 08 4月, 2013 1 次提交
-
-
由 Tony Camuso 提交于
There are no functional changes in this patch. However, because the compliance mode timer can be deleted in more than one function, it seemed expedient to include the function name in the debug strings. Also limited the use of capitals to the first word in the compliance mode debug messages, except after a function name where all words start with lower case, in keeping with the style prevalent elsewhere in xhci.c. Signed-off-by: NTony Camuso <tcamuso@redhat.com> Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
-
- 04 4月, 2013 2 次提交
-
-
由 David Howells 提交于
Rename SEGMENT_SIZE and SEGMENT_SHIFT as the former is used in a.out.h. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-usb@vger.kernel.org Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
-
由 David Howells 提交于
Use ilog2() rather than __ffs() for calculating SEGMENT_SHIFT as ilog2() can be worked out at compile time, whereas __ffs() must be calculated at runtime. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-usb@vger.kernel.org Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
-
- 02 4月, 2013 3 次提交
-
-
由 Chen Gang 提交于
when suspend, it need check 'udev->actconfig'. so when process failure, also need check it. Signed-off-by: NChen Gang <gang.chen@asianux.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geoff Levand 提交于
Remove an unneeded call to ehci_shutdown() in ps3_ehci_remove(). This removal will allow for a loadable ehci driver. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NGeoff Levand <geoff@infradead.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
We want the fixes here as well. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 01 4月, 2013 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ...
-
由 Paul Walmsley 提交于
This reverts commit 6aa97070. Commit 6aa97070 ("lockdep: check that no locks held at freeze time") causes problems with NFS root filesystems. The failures were noticed on OMAP2 and 3 boards during kernel init: [ BUG: swapper/0/1 still has locks held! ] 3.9.0-rc3-00344-ga937536b #1 Not tainted ------------------------------------- 1 lock held by swapper/0/1: #0: (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574 stack backtrace: rpc_wait_bit_killable __wait_on_bit out_of_line_wait_on_bit __rpc_execute rpc_run_task rpc_call_sync nfs_proc_get_root nfs_get_root nfs_fs_mount_common nfs_try_mount nfs_fs_mount mount_fs vfs_kern_mount do_mount sys_mount do_mount_root mount_root prepare_namespace kernel_init_freeable kernel_init Although the rootfs mounts, the system is unstable. Here's a transcript from a PM test: http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt Here's what the test log should look like: http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt Mailing list discussion is here: http://lkml.org/lkml/2013/3/4/221 Deal with this for v3.9 by reverting the problem commit, until folks can figure out the right long-term course of action. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Jeff Layton <jlayton@redhat.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <maciej.rutecki@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 3月, 2013 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "This includes the bug-fix for a >= v3.8-rc1 regression specific to iscsi-target persistent reservation conflict handling (CC'ed to stable), and a tcm_vhost patch to drop VIRTIO_RING_F_EVENT_IDX usage so that in-flight qemu vhost-scsi-pci device code can detect the proper vhost feature bits. Also, there are two more tcm_vhost patches still being discussed by MST and Asias for v3.9 that will be required for the in-flight qemu vhost-scsi-pci device patch to function properly, and that should (hopefully) be the last target fixes for this round." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit
-
- 30 3月, 2013 28 次提交
-
-
由 Michael Grzeschik 提交于
A static count of transfer descriptors was used everywhere in the driver with the fixed number 5. This patch adds a define, named TD_PAGE_COUNT, and replaces all users of this value. This way its possible to have only one parameter to change and limit the amount of buffer pointers per TD. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: NPeter Chen <peter.chen@freescale.com> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
There is no need to call ep_queue unlocked inside the own driver. We move its functionionality into an unlocked version. This patch removes potential unlocked timeslots inside isr_setup_status_phase and isr_get_status_response, in which the lock got released just before acquired again inside usb_ep_queue. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: NPeter Chen <peter.chen@freescale.com> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
It is not safe to truncate requests to the maximum possible size the controller can handle with one td and to keep working. That patch fixes that with proper error handling instead. Reported-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
This patch changes the read of the td status to one atomic operation to analyse coherent bits. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> [Alex: fixed backwards endianness conversion] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
Its not necessary and also not specified in the datasheet to change the ZLT flag before every ep_prime. This patch moves this to the ep_enable and applies it only for non configuration endpoints. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
This patch reworks the cap value from several read and write operations to one single operation. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: NFelipe Balbi <balbi@ti.com> [Alex: removed useless isoc-related bit of code] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
The datasheet of the synopsys core describes only to overwrite the active and halted bits in the qhead before priming any endpoint. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: NFelipe Balbi <balbi@ti.com> [Alex: fixed a case of line-too-long] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Svetoslav Neykov 提交于
Convert between big-endian and little-endian format when accessing the usb controller structures which are little-endian by specification. Fix cases where the little-endian memory layout is taken for granted. The patch doesn't have any effect on the already supported little-endian architectures. Signed-off-by: NSvetoslav Neykov <svetoslav@neykov.name> [Alex: minor cosmetic fixes] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shishkin 提交于
PCI chipideas' platform datas are not static as all such things should be. Fix it. Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
This adds a post handling routine which is called after ci13xxx_add_device was called. The first user is the mx25, which has to disable the external-vbus-divider after the udc has started. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> [Alex: also fixed a signed one-bit bitfield a whitespace error and yet another set of line-too-long and void pointer casting errors] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
This adds mx53 as the next user of the usbmisc driver and makes it possible to disable the overcurrent-detection of the internal phy. Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> [Alex: fixed another set of line-too-long and void pointer cast] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Marc Kleine-Budde 提交于
This attaches the usbmisc_ops to the of_device_id data and makes it possible to define special functions per soc. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> [Alex: fixed one case of line-too-long and one bogus cast to void ptr] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Marc Kleine-Budde 提交于
This fixes a potential race condition where the ci13xxx_imx glue code could be fast enough to call one of the usbmisc_ops before he got a valid value on the static usbmisc pointer. To fix that we first set usbmisc, then call usbmisc_set_ops(). Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Marc Kleine-Budde 提交于
The probe function checks usbmisc to be NULL in the beginning. Without this patch the can only be loaded once. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Grzeschik 提交于
This driver will be used for every Freescale SoC which has this misc memory layout to control the basic usb handling. So better name this driver, function and struct names in a more generic way. Reported-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Felipe Balbi 提交于
chipidea's ffs_nr() is pretty much what __ffs() does. Use that one instead. Signed-off-by: NFelipe Balbi <balbi@ti.com> [rebased on top of debug infrastructure rework] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
The intent here was to have parenthesis around the (ci->hw_ep_max / 2) so that it counts like "0 1 2 0 1 2". In the current code, the mod operation happens first so it counts like "0 0 1 1 2 2". Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> [rebased on top of debug.c changes] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shishkin 提交于
Create and remove debugfs entries in hdrc probe/remove instead of start/stop of the device controller. Gadget specific will not export anything while the controller is in host mode. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shishkin 提交于
Manual role switching function is there for debugging purposes, so has to move to debugfs. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shishkin 提交于
Currently, we have a bunch of files in sysfs that display all sorts of debugging information for the device controller, so they have to move to debugfs where they belong. The "registers" interface have been removed, since it doesn't fit into the current driver design as is and it's hardly a good idea to touch the registers from userspace anyway. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shishkin 提交于
As part of the legacy from the original driver design, we retain home-grown tracing infrastructure, complete with own ring buffer and timestamps, which among other things has a performance penalty. This patch removes it. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Chen 提交于
There are several problems with this patch: + in introduces a sparse warning for a condition that's always negative, + and because of that, it actually doesn't do anything useful, + and vbus detection belongs to otg, not device function anyway. This reverts commit 8c4fc031. Signed-off-by: NPeter Chen <peter.chen@freescale.com> [Alex: amended the above text] Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Felipe Balbi 提交于
switch over to the newly added devm_ioremap_resource which provides more consistent error messages. Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shishkin 提交于
Some headers included in the chipidea controller core are not needed, remove them. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shishkin 提交于
Some headers included in udc core code are not actually needed, remove them and add irqreturn.h, which was implicitly included via irq.h. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shishkin 提交于
debug.c is carrying a lot of includes that aren't needed there, although they implicitly include the ones that are actually needed. Replace the former with the latter. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andy Shevchenko 提交于
On some hardware configurations we have got the request line with the offset. The patch introduces convert_slave_id() helper for that cases. The request line base is came from the driver data provided by the platform_device_id table. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Arnd Bergmann 提交于
As reported by Wu Fengguang's build robot tracking sparse warnings, the dma_spec arguments in the dw_dma_xlate are already byte swapped on little-endian platforms and must not get swapped again. This code is currently not used anywhere, but will be used in Linux 3.10 when the ARM SPEAr platform starts using the generic DMA DT binding. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-