Update code that relied on sched.h including various MM types for them.

This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We are replacing existing PVH guests with new implementation.

We are keeping xen_pvh_domain() macro (for now set to zero) because
when we introduce new PVH implementation later in this series we will
reuse current PVH-specific code (xen_pvh_gnttab_setup()), and that
code is conditioned by 'if (xen_pvh_domain())'. (We will also need
a noop xen_pvh_domain() for !CONFIG_XEN_PVH).
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20160714001901.31603-7-paul.gortmaker@windriver.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When page tables entries are set using xen_set_pte_init() during early
boot there is no page fault handler that could handle a fault when
performing an M2P lookup.

In 64 bit guests (usually dom0) early_ioremap() would fault in
xen_set_pte_init() because an M2P lookup faults because the MFN is in
MMIO space and not mapped in the M2P.  This lookup is done to see if
the PFN in in the range used for the initial page table pages, so that
the PTE may be set as read-only.

The M2P lookup can be avoided by moving the check (and clear of RW)
earlier when the PFN is still available.
Reported-by: NKevin Moraga <kmoragas@riseup.net>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>

xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper
bound of the loop setting non-kernel-image entries to zero should not
exceed the size of level2_kernel_pgt.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: trivial@kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Using MMUEXT_TLB_FLUSH_MULTI doesn't buy us much since the hypervisor
will likely perform same IPIs as would have the guest.

More importantly, using MMUEXT_INVLPG_MULTI may not to invalidate the
guest's address on remote CPU (when, for example, VCPU from another guest
is running there).
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

pte_update_defer can be removed as it is always set to the same
function as pte_update. So any usage of pte_update_defer() can be
replaced by pte_update().

pmd_update and pmd_update_defer are always set to paravirt_nop, so they
can just be nuked.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: jeremy@goop.org
Cc: chrisw@sous-sol.org
Cc: akataria@vmware.com
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xen.org
Cc: konrad.wilk@oracle.com
Cc: david.vrabel@citrix.com
Cc: boris.ostrovsky@oracle.com
Link: http://lkml.kernel.org/r/1447771879-1806-1-git-send-email-jgross@suse.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Mapping a large range of foreign GFNs can take a long time, add a
reschedule point after each batch of 16 GFNs.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

The privcmd code is mixing the usage of GFN and MFN within the same
functions which make the code difficult to understand when you only work
with auto-translated guests.

The privcmd driver is only dealing with GFN so replace all the mention
of MFN into GFN.

The ioctl structure used to map foreign change has been left unchanged
given that the userspace is using it. Nonetheless, add a comment to
explain the expected value within the "mfn" field.
Signed-off-by: NJulien Grall <julien.grall@citrix.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Check whether the hypervisor supplied p2m list is placed at a location
which is conflicting with the target E820 map. If this is the case
relocate it to a new area unused up to now and compliant to the E820
map.

As the p2m list might by huge (up to several GB) and is required to be
mapped virtually, set up a temporary mapping for the copied list.

For pvh domains just delete the p2m related information from start
info instead of reserving the p2m memory, as we don't need it at all.

For 32 bit kernels adjust the memblock_reserve() parameters in order
to cover the page tables only. This requires to memblock_reserve() the
start_info page on it's own.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Some special pages containing interfaces to xen are being reserved
implicitly only today. The memblock_reserve() call to reserve them is
meant to reserve the p2m list supplied by xen. It is just reserving
not only the p2m list itself, but some more pages up to the start of
the xen built page tables.

To be able to move the p2m list to another pfn range, which is needed
for support of huge RAM, this memblock_reserve() must be split up to
cover all affected reserved pages explicitly.

The affected pages are:
- start_info page
- xenstore ring (might be missing, mfn is 0 in this case)
- console ring (not for initial domain)
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Check whether the page tables built by the domain builder are at
memory addresses which are in conflict with the target memory map.
If this is the case just panic instead of running into problems
later.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Direct Xen to place the initial P->M table outside of the initial
mapping, as otherwise the 1G (implementation) / 2G (theoretical)
restriction on the size of the initial mapping limits the amount
of memory a domain can be handed initially.

As the initial P->M table is copied rather early during boot to
domain private memory and it's initial virtual mapping is dropped,
the easiest way to avoid virtual address conflicts with other
addresses in the kernel is to use a user address area for the
virtual address of the initial P->M table. This allows us to just
throw away the page tables of the initial mapping after the copy
without having to care about address invalidation.

It should be noted that this patch won't enable a pv-domain to USE
more than 512 GB of RAM. It just enables it to be started with a
P->M table covering more memory. This is especially important for
being able to boot a Dom0 on a system with more than 512 GB memory.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Based-on-patch-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

We would want to use number of page table level to define mm_struct.
Let's expose it as CONFIG_PGTABLE_LEVELS.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the IOCTL_PRIVCMD_MMAPBATCH_V2 (and older V1 version) map
multiple frames at a time rather than one at a time, despite the pages
being non-consecutive GFNs.

xen_remap_foreign_mfn_array() is added which maps an array of GFNs
(instead of a consecutive range of GFNs).

Since per-frame errors are returned in an array, privcmd must set the
MMAPBATCH_V1 error bits as part of the "report errors" phase, after
all the frames are mapped.

Migrate times are significantly improved (when using a PV toolstack
domain).  For example, for an idle 12 GiB PV guest:

        Before     After
  real  0m38.179s  0m26.868s
  user  0m15.096s  0m13.652s
  sys   0m28.988s  0m18.732s
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Auto-translated physmap guests (arm, arm64 and x86 PVHVM/PVH) map and
unmap foreign GFNs using the same method (updating the physmap).
Unify the two arm and x86 implementations into one commont one.

Note that on arm and arm64, the correct error code will be returned
(instead of always -EFAULT) and map/unmap failure warnings are no
longer printed.  These changes are required if the foreign domain is
paging (-ENOENT failures are expected and must be propagated up to the
caller).
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Remove a nested ifdef.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

The file arch/x86/xen/mmu.c has some functions that can be annotated
with "__init".
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

With the virtual mapped linear p2m list the post-init mmu operations
must be used for setting up the p2m mappings, as in case of
CONFIG_FLATMEM the init routines may trigger BUGs.

paging_init() sets up all infrastructure needed to switch to the
post-init mmu ops done by xen_post_allocator_init(). With the virtual
mapped linear p2m list we need some mmu ops during setup of this list,
so we have to switch to the correct mmu ops as soon as possible.

The p2m list is usable from the beginning, just expansion requires to
have established the new linear mapping. So the call of
xen_remap_memory() had to be introduced, but this is not due to the
mmu ops requiring this.

Summing it up: calling xen_post_allocator_init() not directly after
paging_init() was conceptually wrong in the beginning, it just didn't
matter up to now as no functions used between the two calls needed
some critical mmu ops (e.g. alloc_pte). This has changed now, so I
corrected it.
Reported-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

At start of the day the Xen hypervisor presents a contiguous mfn list
to a pv-domain. In order to support sparse memory this mfn list is
accessed via a three level p2m tree built early in the boot process.
Whenever the system needs the mfn associated with a pfn this tree is
used to find the mfn.

Instead of using a software walked tree for accessing a specific mfn
list entry this patch is creating a virtual address area for the
entire possible mfn list including memory holes. The holes are
covered by mapping a pre-defined  page consisting only of "invalid
mfn" entries. Access to a mfn entry is possible by just using the
virtual base address of the mfn list and the pfn as index into that
list. This speeds up the (hot) path of determining the mfn of a
pfn.

Kernel build on a Dell Latitude E6440 (2 cores, HT) in 64 bit Dom0
showed following improvements:

Elapsed time: 32:50 ->  32:35
System:       18:07 ->  17:47
User:        104:00 -> 103:30

Tested with following configurations:
- 64 bit dom0, 8GB RAM
- 64 bit dom0, 128 GB RAM, PCI-area above 4 GB
- 32 bit domU, 512 MB, 8 GB, 43 GB (more wouldn't work even without
                                    the patch)
- 32 bit domU, ballooning up and down
- 32 bit domU, save and restore
- 32 bit domU with PCI passthrough
- 64 bit domU, 8 GB, 2049 MB, 5000 MB
- 64 bit domU, ballooning up and down
- 64 bit domU, save and restore
- 64 bit domU with PCI passthrough
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Today get_phys_to_machine() is always called when the mfn for a pfn
is to be obtained. Add a wrapper __pfn_to_mfn() as inline function
to be able to avoid calling get_phys_to_machine() when possible as
soon as the switch to a linear mapped p2m list has been done.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Early in the boot process the memory layout of a pv-domain is changed
to match the E820 map (either the host one for Dom0 or the Xen one)
regarding placement of RAM and PCI holes. This requires removing memory
pages initially located at positions not suitable for RAM and adding
them later at higher addresses where no restrictions apply.

To be able to operate on the hypervisor supported p2m list until a
virtual mapped linear p2m list can be constructed, remapping must
be delayed until virtual memory management is initialized, as the
initial p2m list can't be extended unlimited at physical memory
initialization time due to it's fixed structure.

A further advantage is the reduction in complexity and code volume as
we don't have to be careful regarding memory restrictions during p2m
updates.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

In arch/x86/xen/p2m.c three different allocation functions for
obtaining a memory page are used: extend_brk(), alloc_bootmem_align()
or __get_free_page().  Which of those functions is used depends on the
progress of the boot process of the system.

Introduce a common allocation routine selecting the to be called
allocation routine dynamically based on the boot progress. This allows
moving initialization steps without having to care about changing
allocation calls.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

With the dynamical mapping between cache modes and pgprot values it is
now possible to use all cache modes via the Xen hypervisor PAT settings
in a pv domain.

All to be done is to read the PAT configuration MSR and set up the
translation tables accordingly.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stefan.bader@canonical.com
Cc: xen-devel@lists.xensource.com
Cc: ville.syrjala@linux.intel.com
Cc: jbeulich@suse.com
Cc: toshi.kani@hp.com
Cc: plagnioj@jcrosoft.com
Cc: tomi.valkeinen@ti.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1415019724-4317-19-git-send-email-jgross@suse.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This adds CONFIG_X86_VSYSCALL_EMULATION, guarded by CONFIG_EXPERT.
Turning it off completely disables vsyscall emulation, saving ~3.5k
for vsyscall_64.c, 4k for vsyscall_emu_64.S (the fake vsyscall
page), some tiny amount of core mm code that supports a gate area,
and possibly 4k for a wasted pagetable.  The latter is because the
vsyscall addresses are misaligned and fit poorly in the fixmap.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/406db88b8dd5f0cbbf38216d11be34bbb43c7eae.1414618407.git.luto@amacapital.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The 3 level p2m tree for the Xen tools is constructed very early at
boot by calling xen_build_mfn_list_list(). Memory needed for this tree
is allocated via extend_brk().

As this tree (other than the kernel internal p2m tree) is only needed
for domain save/restore, live migration and crash dump analysis it
doesn't matter whether it is constructed very early or just some
milliseconds later when memory allocation is possible by other means.

This patch moves the call of xen_build_mfn_list_list() just after
calling xen_pagetable_p2m_copy() simplifying this function, too, as it
doesn't have to bother with two parallel trees now. The same applies
for some other internal functions.

While simplifying code, make early_can_reuse_p2m_middle() static and
drop the unused second parameter. p2m_mid_identity_mfn can be removed
as well, it isn't used either.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Since mfn_to_pfn() returns the correct PFN for identity mappings (as
used for MMIO regions), the use of _PAGE_IOMAP is not required in
pte_mfn_to_pfn().

Do not set the _PAGE_IOMAP flag in pte_pfn_to_mfn() and do not use it
in pte_mfn_to_pfn().

This will allow _PAGE_IOMAP to be removed, making it available for
future use.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When RANDOMIZE_BASE (KASLR) is enabled; or the sum of all loaded
modules exceeds 512 MiB, then loading modules fails with a warning
(and hence a vmalloc allocation failure) because the PTEs for the
newly-allocated vmalloc address space are not zero.

  WARNING: CPU: 0 PID: 494 at linux/mm/vmalloc.c:128
           vmap_page_range_noflush+0x2a1/0x360()

This is caused by xen_setup_kernel_pagetables() copying
level2_kernel_pgt into level2_fixmap_pgt, overwriting many non-present
entries.

Without KASLR, the normal kernel image size only covers the first half
of level2_kernel_pgt and module space starts after that.

L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[  0..255]->kernel
                                                  [256..511]->module
                          [511]->level2_fixmap_pgt[  0..505]->module

This allows 512 MiB of of module vmalloc space to be used before
having to use the corrupted level2_fixmap_pgt entries.

With KASLR enabled, the kernel image uses the full PUD range of 1G and
module space starts in the level2_fixmap_pgt. So basically:

L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[0..511]->kernel
                          [511]->level2_fixmap_pgt[0..505]->module

And now no module vmalloc space can be used without using the corrupt
level2_fixmap_pgt entries.

Fix this by properly converting the level2_fixmap_pgt entries to MFNs,
and setting level1_fixmap_pgt as read-only.

A number of comments were also using the the wrong L3 offset for
level2_kernel_pgt.  These have been corrected.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org

When running as a dom0 in PVH mode, foreign pfns that are accessed
must be added to our p2m which is managed by xen. This is done via
XENMEM_add_to_physmap_range hypercall. This is needed for toolstack
building guests and mapping guest memory, xentrace mapping xen pages,
etc.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

_PAGE_IOMAP is used in xen_remap_domain_mfn_range() to prevent the
pfn_pte() call in remap_area_mfn_pte_fn() from using the p2m to translate
the MFN.  If mfn_pte() is used instead, the p2m look up is avoided and
the use of _PAGE_IOMAP is no longer needed.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This makes the 64-bit and x32 vdsos use the same mechanism as the
32-bit vdso.  Most of the churn is deleting all the old fixmap code.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/8af87023f57f6bb96ec8d17fce3f88018195b49b.1399317206.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This reverts commit a9c8e4be.

PTEs in Xen PV guests must contain machine addresses if _PAGE_PRESENT
is set and pseudo-physical addresses is _PAGE_PRESENT is clear.

This is because during a domain save/restore (migration) the page
table entries are "canonicalised" and uncanonicalised". i.e., MFNs are
converted to PFNs during domain save so that on a restore the page
table entries may be rewritten with the new MFNs on the destination.
This canonicalisation is only done for PTEs that are present.

This change resulted in writing PTEs with MFNs if _PAGE_PROTNONE (or
_PAGE_NUMA) was set but _PAGE_PRESENT was clear.  These PTEs would be
migrated as-is which would result in unexpected behaviour in the
destination domain.  Either a) the MFN would be translated to the
wrong PFN/page; b) setting the _PAGE_PRESENT bit would clear the PTE
because the MFN is no longer owned by the domain; or c) the present
bit would not get set.

Symptoms include "Bad page" reports when munmapping after migrating a
domain.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org>        [3.12+]

Checkin

    b0b49f26 x86, vdso: Remove compat vdso support

... removed the VDSO from the fixmap, and thus FIX_VDSO; remove a
stray reference in Xen.

Found by Fengguang Wu's test robot.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Link: http://lkml.kernel.org/r/4bb4690899106eb11430b1186d5cc66ca9d1660c.1394751608.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Steven Noonan forwarded a users report where they had a problem starting
vsftpd on a Xen paravirtualized guest, with this in dmesg:

  BUG: Bad page map in process vsftpd  pte:8000000493b88165 pmd:e9cc01067
  page:ffffea00124ee200 count:0 mapcount:-1 mapping:     (null) index:0x0
  page flags: 0x2ffc0000000014(referenced|dirty)
  addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping:          (null) index:7f97eea74
  CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1
  Call Trace:
    dump_stack+0x45/0x56
    print_bad_pte+0x22e/0x250
    unmap_single_vma+0x583/0x890
    unmap_vmas+0x65/0x90
    exit_mmap+0xc5/0x170
    mmput+0x65/0x100
    do_exit+0x393/0x9e0
    do_group_exit+0xcc/0x140
    SyS_exit_group+0x14/0x20
    system_call_fastpath+0x1a/0x1f
  Disabling lock debugging due to kernel taint
  BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1
  BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1

The issue could not be reproduced under an HVM instance with the same
kernel, so it appears to be exclusive to paravirtual Xen guests.  He
bisected the problem to commit 1667918b ("mm: numa: clear numa
hinting information on mprotect") that was also included in 3.12-stable.

The problem was related to how xen translates ptes because it was not
accounting for the _PAGE_NUMA bit.  This patch splits pte_present to add
a pteval_present helper for use by xen so both bare metal and xen use
the same code when checking if a PTE is present.

[mgorman@suse.de: wrote changelog, proposed minor modifications]
[akpm@linux-foundation.org: fix typo in comment]
Reported-by: NSteven Noonan <steven@uplinklabs.net>
Tested-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NElena Ufimtseva <ufimtseva@gmail.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The paravirt thunks use a hack of using a static reference to a static
function to reference that function from the top level statement.

This assumes that gcc always generates static function names in a specific
format, which is not necessarily true.

Simply make these functions global and asmlinkage or __visible. This way the
static __used variables are not needed and everything works.

Functions with arguments are __visible to keep the register calling
convention on 32bit.

Changed in paravirt and in all users (Xen and vsmp)

v2: Use __visible for functions with arguments

Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ido Yariv <ido@wizery.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-5-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We also optimize one - the TLB flush. The native operation would
needlessly IPI offline VCPUs causing extra wakeups. Using the
Xen one avoids that and lets the hypervisor determine which
VCPU needs the TLB flush.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

.. which are surprisingly small compared to the amount for PV code.

PVH uses mostly native mmu ops, we leave the generic (native_*) for
the majority and just overwrite the baremetal with the ones we need.

At startup, we are running with pre-allocated page-tables
courtesy of the tool-stack. But we still need to graft them
in the Linux initial pagetables. However there is no need to
unpin/pin and change them to R/O or R/W.

Note that the xen_pagetable_init due to 7836fec9d0994cc9c9150c5a33f0eb0eb08a335a
"xen/mmu/p2m: Refactor the xen_pagetable_init code." does not
need any changes - we just need to make sure that xen_post_allocator_init
does not alter the pvops from the default native one.
Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Stefano noticed that the code runs only under 64-bit so
the comments about 32-bit are pointless.

Also we change the condition for xen_revector_p2m_tree
returning the same value (because it could not allocate
a swath of space to put the new P2M in) or it had been
called once already. In such we return early from the
function.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

The revectoring and copying of the P2M only happens when
!auto-xlat and on 64-bit builds. It is not obvious from
the code, so lets have seperate 32 and 64-bit functions.

We also invert the check for auto-xlat to make the code
flow simpler.
Suggested-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>