This patch moves the pca953x.h header from include/linux/i2c to
include/linux/platform_data and updates existing support accordingly.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'samsung-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:
samsung cleanup for v3.12
- cleanup non-dt stuff in exynos
- remove 0x from exynos dt files
- remove unused codes

* tag 'samsung-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*()
  ARM: dts: Remove '0x's from Exynos5440 DTS file
  ARM: dts: Remove '0x's from Exynos5420 DTS file
  ARM: dts: Remove '0x's from Exynos5250 DTS file
  ARM: dts: Remove '0x's from Exynos4x12 DTSI file
  ARM: dts: Remove '0x's from Exynos4210 DTSI file
  ARM: EXYNOS: Cleanup common.h file
  irqchip: exynos: cleanup non-DT stuff in exynos-combiner
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Merge tag 'tegra-for-3.12-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup

From: Stephen Warren:
ARM: tegra: cleanups for 3.12

This branch includes a single cleanup patch which removes redundant
error-handling for platform_get_resource().

* tag 'tegra-for-3.12-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  tegra: simplify use of devm_ioremap_resource
Signed-off-by: NKevin Hilman <khilman@linaro.org>

From: Michal Simek:
arm: Xilinx Zynq cleanup patches for v3.12

This branch contains these fixes:
- SLCR cleanup
- Hotplug cleanup

* tag 'zynq-cleanup-for-3.12' of git://git.xilinx.com/linux-xlnx:
  arm: zynq: hotplug: Remove unreachable code
  arm: zynq: slcr: Use read-modify-write for register writes
  arm: zynq: slcr: Clean up #defines
  arm: zynq: slcr: Remove redundant header #includes
Signed-off-by: NKevin Hilman <khilman@linaro.org>

zynq_platform_do_lowpower() does never return. Hence remove
all code which relies on that function returning and consolidate the
remains.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Merge tag 'omap-for-v3.12/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:
USB nop phy rename via Felipe Balbi <balbi@ti.com>:

Here's a pull request of one patch to avoid conflicts during the merge
window.

* tag 'omap-for-v3.12/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Commit 17397a22("ARM: EXYNOS: Remove platform device initialization")
removes calling exynos4_default_sdhci*() functions; thus, these are
not necessary any more.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

From Jason Cooper:
mvebu soc changes for v3.12

 - mvebu
    - cleanup redundant code

* tag 'soc-3.12' of git://git.infradead.org/linux-mvebu:
  ARM: mach-mvebu: remove redundant DT parsing and validation
Signed-off-by: NOlof Johansson <olof@lixom.net>

Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@

- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

From Tomasz Figa:
Here is the Samsung PWM cleanup series. Particular patches of the series
involve following modifications:
 - fixing up few things in samsung_pwm_timer clocksource driver,
 - moving remaining Samsung platforms to the new clocksource driver,
 - removing old clocksource driver,
 - adding new multiplatform- and DT-aware PWM driver,
 - moving all Samsung platforms to use the new PWM driver,
 - removing old PWM driver,
 - removing all PWM-related code that is not used anymore.

* tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux: (684 commits)
  ARM: SAMSUNG: Remove plat/regs-timer.h header
  ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
  ARM: SAMSUNG: Remove pwm-clock infrastructure
  ARM: SAMSUNG: Remove old PWM timer platform devices
  pwm: Remove superseded pwm-samsung-legacy driver
  ARM: SAMSUNG: Modify board files to use new PWM platform device
  ARM: SAMSUNG: Rework private data handling in dev-backlight
  pwm: Add new pwm-samsung driver
  pwm: samsung: Rename to pwm-samsung-legacy
  ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
  ARM: SAMSUNG: Remove old samsung-time driver
  ARM: SAMSUNG: Move all platforms to new clocksource driver
  ARM: SAMSUNG: Set PWM platform data
  ARM: SAMSUNG: Add new PWM platform device
  ARM: SAMSUNG: Unify base address definitions of timer block
  clocksource: samsung_pwm_timer: Handle suspend/resume correctly
  clocksource: samsung_pwm_timer: Do not use clocksource_mmio
  clocksource: samsung_pwm_timer: Cache clocksource register address
  clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit
  clocksource: samsung_pwm_timer: Do not request PWM mem region
  + v3.11-rc4

Conflicts:
	arch/arm/Kconfig.debug
Signed-off-by: NOlof Johansson <olof@lixom.net>

From David Brown <davidb@codeaurora.org>:
* msm/cleanup:
  ARM: msm: Only compile io.c on platforms that use it
  iommu/msm: Move mach includes to iommu directory
  ARM: msm: Remove devices-iommu.c
  ARM: msm: Move mach/board.h contents to common.h
  ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE
  ARM: msm: Remove TMR and TMR0 static mappings
  ARM: msm: Move debug-macro.S to include/debug
  ARM: msm: Don't compile __msm_ioremap_caller() unless used
  ARM: msm: Remove unused and unmapped MSM_TLMM_BASE for 8x60
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Since all uses of the header has been removed by previous patches it can
be removed safely.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch removes remaining inclusions of plat/regs-timer.h as
a preparation to remove the header.

As a part of this, things like save and restore of PWM registers are
removed from SoC-specific code, because it is handled in appropriate
drivers now.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Since all the used PWM prescalers and dividers configuration has been
moved to appropriate drivers, the pwm-clock infrastructure is now
unused and so this patch removes it.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch removes old Samsung PWM timer platform devices that are not
used any more.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch removes the now unused pwm-samsung-legacy driver, which was
replaced by new pwm-samsung driver.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThierry Reding <thierry.reding@gmail.com>

This patch modifies any board files using the legacy PWM device to use
the new device instead.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch modifies dev-backlight helpers to get private data using
container_of instead of abusing platform_data field of PWM device.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch introduces new Samsung PWM driver, which is completely
rewritten to be multiplatform- and DeviceTree-aware.

In addition, remaining problems of old driver are fixed, such as:
 - proper handling of hardware variants,
 - synchronization on SMP systems,
 - handling of boundary parameter values,
 - hardware sharing with PWM clocksource driver,
 - undefined state of PWM output after stopping PWM channel.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThierry Reding <thierry.reding@gmail.com>

Merge tag 'omap-for-v3.12/cleanup-unused-defines' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:
Removal of unused omap defines via Paul Walmsley <paul@pwsan.com>:

This series removes the currently-unused PRCM macros from
arch/arm/mach-omap2.

Basic test logs are available at:

http://www.pwsan.com/omap/testlogs/drop_unused_prcm_macros_v3.11-rc/20130721211401/

Once, years ago, we thought that it would be good to document the PRCM
register bits in the Linux codebase.  Most folks in the broader
community did not have access to the same documentation, so we thought
that they might be able to use these bits to fix bugs and improve the
code.

We were also able to autogenerate most of these macros, so it was
thought that defining them in advance would reduce the risk of error,
inconsistencies, and merge conflicts caused when patch sets
incrementally defined them by hand.

Well, nice thoughts.  But the first rationale was rendered partially
obsolete when TI started to release public TRM documentation PDFs at
some point in the OMAP3 timeframe.  (Despite their weaknesses, TI's
public OMAP TRMs remain the most useful public documentation available
for any ARM Linux SoC -- at least to the extent of my knowledge.)  And
then the current Linux development tropism towards
development-by-negative-diffstat obliterated the remainder of the
above two philosophies.

So, for the few, the masochistic, out there who wish to continue
developing TI PRCM code, I would ask that you resurrect any
additionally-needed macros from these commits, rather than writing
them manually.  Purely for the sake of a pleasant atavism, perhaps; the
way one appreciates a used bookstore, or a video rental store...

And thanks to the upstream maintainers for being patient while we
adjust.

* tag 'omap-for-v3.12/cleanup-unused-defines' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP5: PRM/CM: Cleanup unused header
  ARM: OMAP4: PRM/CM: Cleanup unused header
  ARM: OMAP3: PRM/CM: Cleanup unused header
  ARM: OMAP2: PRM/CM: Cleanup unused header
Signed-off-by: NOlof Johansson <olof@lixom.net>

The "nop" driver isn't a do-nothing-stub but supports a couple functions
like clock on/off or is able to use a voltage regulator. This patch
simply renames the driver to "generic" since it is easy possible to
extend it by a simple function istead of writing a complete driver.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

arm_dt_init_cpu_maps parses the device tree, validates and sets the
cpu_possible_mask appropriately. It is unnecessary to do another DT
parse to get the number of cpus, use num_possible_cpus instead.

Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: NSudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Acked-by: NGregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

Only the non-dt based MSM platforms need to map memory from their
machine descriptor. Unfortunately it is always compiled if
ARCH_MSM=y and the file also has mach/ includes in it. Since
dt-based MSM platforms aren't actually using anything in this
file just compile io.c on the non-dt based MSM platforms. This
allows the dt-based platforms to participate in the
multi-platform kernel.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Two header files exist in mach-msm's include/mach directory that
are only used by the MSM iommu driver. Move these files to the
iommu driver directory and prefix them with "msm_". This allows
us to compile the MSM iommu driver on multi-platform kernels.
Acked-by: NJoerg Roedel <joro@8bytes.org>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

The iommu devices are registered in software, when they should
really be part of the DT. Since we don't currently have DT
bindings in place for the MSM iommu driver just remove this file
for the time being. This is not removing any functionality anyway
because these devices aren't probing today due to missing clocks.

Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

The contents of mach/board.h are only used by files within
mach-msm so there is no need to export this file outside of the
mach-msm directory. Move the contents of the file to common.h to
allow us to compile MSM in the multi-platform kernel.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

This allows us to remove the init_time callback in the DT machine
descriptors, shrinking the code.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Nobody is using these mappings so just drop them. of_iomap() in
the timer driver will take care of it for us. Doing this allows
us to remove the 8x60 and 8960 iomap files completely.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

One more step to allowing MSM to participate in the
multi-platform defconfig.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
[davidb: Comment cleanup requested by sboyd]
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

This patch renames the old pwm-samsung driver to pwm-samsung-legacy to
create place for the new, rewritten, DT-aware pwm-samsung driver.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThierry Reding <thierry.reding@gmail.com>

As the need for an IRQ chip handling PWM timer interrupt chaining is
gone now, this patch removes all the code made unnecessary.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch removes the old samsung-time driver, since all its users have
been migrated to the new samsung_pwm_timer clocksource driver.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch moves all Samsung platforms using PWM clocksource from legacy
samsung-time to new samsung-pwm-timer driver.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch adds PWM platform data needed for legacy (non-DT) platforms
to handle SoC-specific bits of the PWM/timer block.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch adds new samsung_device_pwm platform device that represents
the whole PWM/timer block and includes memory and IRQ resources.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch makes all defintions of timer block base address use the same
prefix to allow using the common name to define platform device
resource.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>

Current suspend/resume handling of the driver was broken, because:
 - periodic timer was being enabled in CLOCK_EVT_MODE_RESUME mode, which
   does not seem to be correct behavior looking at other platforms,
 - PWM divisors need to be restored, but they were not,
 - clockevent interrupt mask needs to be restored, but it was not,
 - clocksource was being restored in clockevent resume callback.

This patch fixes issues mentioned above, making suspend/resume handling
in the driver correct.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>

In case of Samsung PWM timer, clocksource MMIO can not be used, because
custom suspend/resume callbacks are required.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Instead of calculating register every time the timer should be read,
we can just do it one time at initialization and store the address in
driver data.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

PWM channel 4 has its autoreload bit located at different position. This
patch fixes the driver to account for that.

This fixes a problem with the clocksource hanging after it overflows because
it is not reloaded any more.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NMark Brown <broonie@linaro.org>
Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>