Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 31 7月, 2013 1 次提交
    • S
      Do not attempt to do cifs operations reading symlinks with SMB2 · 1b244081
      由 Steve French 提交于 
      When use of symlinks is enabled (mounting with mfsymlinks option) to
non-Samba servers, we always tried to use cifs, even when we
were mounted with SMB2 or SMB3, which causes the server to drop the
network connection.

This patch separates out the protocol specific operations for cifs from
the code which recognizes symlinks, and fixes the problem where
with SMB2 mounts we attempt cifs operations to open and read
symlinks.  The next patch will add support for SMB2 for opening
and reading symlinks.  Additional followon patches will address
the similar problem creating symlinks.
Signed-off-by: NSteve French <smfrench@gmail.com>
      1b244081
  3. 05 5月, 2013 1 次提交
    • J
      [CIFS] cifs: Rename cERROR and cFYI to cifs_dbg · f96637be
      由 Joe Perches 提交于 
      It's not obvious from reading the macro names that these macros
are for debugging.  Convert the names to a single more typical
kernel style cifs_dbg macro.

	cERROR(1, ...)   -> cifs_dbg(VFS, ...)
	cFYI(1, ...)     -> cifs_dbg(FYI, ...)
	cFYI(DBG2, ...)  -> cifs_dbg(NOISY, ...)

Move the terminating format newline from the macro to the call site.

Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.

Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)

$ size fs/cifs/cifs.ko*
   text    data     bss     dec     hex filename
 265245	   2525	    132	 267902	  4167e	fs/cifs/cifs.ko.new
 268359    2525     132  271016   422a8 fs/cifs/cifs.ko.old

Other miscellaneous changes around these conversions:

o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
  from the macros to be more kernel style like.  A few formats
  previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
  added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>
      f96637be
  5. 09 1月, 2013 1 次提交
  7. 25 9月, 2012 1 次提交
  9. 20 8月, 2012 1 次提交
  11. 25 7月, 2012 1 次提交
  13. 24 7月, 2012 2 次提交
  15. 02 11月, 2011 1 次提交
  17. 13 10月, 2011 1 次提交
    • S
      cifs: Add mount options for backup intent (try #6) · 3d3ea8e6
      由 Shirish Pargaonkar 提交于 
      Add mount options backupuid and backugid.

It allows an authenticated user to access files with the intent to back them
up including their ACLs, who may not have access permission but has
"Backup files and directories user right" on them (by virtue of being part
of the built-in group Backup Operators.

When mount options backupuid is specified, cifs client restricts the
use of backup intents to the user whose effective user id is specified
along with the mount option.

When mount options backupgid is specified, cifs client restricts the
use of backup intents to the users whose effective user id belongs to the
group id specified along with the mount option.

If an authenticated user is not part of the built-in group Backup Operators
at the server, access to such files is denied, even if allowed by the client.
Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>
      3d3ea8e6
  19. 26 7月, 2011 1 次提交
  21. 27 5月, 2011 3 次提交
  23. 12 4月, 2011 1 次提交
    • S
      various endian fixes to cifs · 5443d130
      由 Steve French 提交于 
      make modules C=2 M=fs/cifs CF=-D__CHECK_ENDIAN__

Found for example:

 CHECK   fs/cifs/cifssmb.c
fs/cifs/cifssmb.c:728:22: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:728:22:    expected unsigned short [unsigned] [usertype] Tid
fs/cifs/cifssmb.c:728:22:    got restricted __le16 [usertype] <noident>
fs/cifs/cifssmb.c:1883:45: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:1883:45:    expected long long [signed] [usertype] fl_start
fs/cifs/cifssmb.c:1883:45:    got restricted __le64 [usertype] start
fs/cifs/cifssmb.c:1884:54: warning: restricted __le64 degrades to integer
fs/cifs/cifssmb.c:1885:58: warning: restricted __le64 degrades to integer
fs/cifs/cifssmb.c:1886:43: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:1886:43:    expected unsigned int [unsigned] fl_pid
fs/cifs/cifssmb.c:1886:43:    got restricted __le32 [usertype] pid

In checking new smb2 code for missing endian conversions, I noticed
some endian errors had crept in over the last few releases into the
cifs code (symlink, ntlmssp, posix lock, and also a less problematic warning
in fscache).  A followon patch will address a few smb2 endian
problems.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      5443d130
  25. 31 1月, 2011 1 次提交
  27. 28 1月, 2011 1 次提交
  29. 26 1月, 2011 1 次提交
  31. 13 1月, 2011 1 次提交
  33. 07 1月, 2011 1 次提交
    • N
      fs: dcache reduce branches in lookup path · fb045adb
      由 Nick Piggin 提交于 
      Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.

Patched with:

git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      fb045adb
  35. 07 10月, 2010 2 次提交
  37. 30 9月, 2010 7 次提交
  39. 21 4月, 2010 1 次提交
    • J
      [CIFS] Neaten cERROR and cFYI macros, reduce text space · b6b38f70
      由 Joe Perches 提交于 
      Neaten cERROR and cFYI macros, reduce text space
~2.5K

Convert '__FILE__ ": " fmt' to '"%s: " fmt', __FILE__' to save text space
Surround macros with do {} while
Add parentheses to macros
Make statement expression macro from macro with assign
Remove now unnecessary parentheses from cFYI and cERROR uses

defconfig with CIFS support old
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 156012	   1760	    148	 157920	  268e0	fs/cifs/built-in.o

defconfig with CIFS support old
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 153508	   1760	    148	 155416	  25f18	fs/cifs/built-in.o

allyesconfig old:
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 309138	   3864	  74824	 387826	  5eaf2	fs/cifs/built-in.o

allyesconfig new
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 305655	   3864	  74824	 384343	  5dd57	fs/cifs/built-in.o
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      b6b38f70
  41. 30 3月, 2010 1 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      由 Tejun Heo 提交于 
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  43. 26 6月, 2009 1 次提交
    • S
      cifs: Fix incorrect return code being printed in cFYI messages · 0f3bc09e
      由 Suresh Jayaraman 提交于 
      FreeXid() along with freeing Xid does add a cifsFYI debug message that
prints rc (return code) as well. In some code paths where we set/return
error code after calling FreeXid(), incorrect error code is being
printed when cifsFYI is enabled.

This could be misleading in few cases. For eg.
In cifs_open() if cifs_fill_filedata() returns a valid pointer to
cifsFileInfo, FreeXid() prints rc=-13 whereas 0 is actually being
returned. Fix this by setting rc before calling FreeXid().

Basically convert

FreeXid(xid);			rc = -ERR;
return -ERR;		=>	FreeXid(xid);
				return rc;

[Note that Christoph would like to replace the GetXid/FreeXid
calls, which are primarily used for debugging.  This seems
like a good longer term goal, but although there is an
alternative tracing facility, there are no examples yet
available that I know of that we can use (yet) to
convert this cifs function entry/exit logging, and for
creating an identifier that we can use to correlate
all dmesg log entries for a particular vfs operation
(ie identify all log entries for a particular vfs
request to cifs: e.g. a particular close or read or write
or byte range lock call ... and just using the thread id
is harder).  Eventually when a replacement
for this is available (e.g. when NFS switches over and various
samples to look at in other file systems) we can remove the
GetXid/FreeXid macro but in the meantime multiple people
use this run time configurable logging all the time
for debugging, and Suresh's patch fixes a problem
which made it harder to notice some low
memory problems in the log so it is worthwhile
to fix this problem until a better logging
approach is able to be used]
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      0f3bc09e
  45. 19 5月, 2009 1 次提交
    • J
      cifs: fix pointer initialization and checks in cifs_follow_symlink (try #4) · 8b6427a2
      由 Jeff Layton 提交于 
      This is the third respin of the patch posted yesterday to fix the error
handling in cifs_follow_symlink. It also includes a fix for a bogus NULL
pointer check in CIFSSMBQueryUnixSymLink that Jeff Moyer spotted.

It's possible for CIFSSMBQueryUnixSymLink to return without setting
target_path to a valid pointer. If that happens then the current value
to which we're initializing this pointer could cause an oops when it's
kfree'd.

This patch is a little more comprehensive than the last patches. It
reorganizes cifs_follow_link a bit for (hopefully) better readability.
It should also eliminate the uneeded allocation of full_path on servers
without unix extensions (assuming they can get to this point anyway, of
which I'm not convinced).

On a side note, I'm not sure I agree with the logic of enabling this
query even when unix extensions are disabled on the client. It seems
like that should disable this as well. But, changing that is outside the
scope of this fix, so I've left it alone for now.
Reported-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@inraded.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      8b6427a2
  47. 01 5月, 2009 2 次提交
  49. 30 4月, 2009 1 次提交
  51. 15 5月, 2008 2 次提交
  53. 29 4月, 2008 1 次提交
  55. 15 3月, 2008 1 次提交
    • S
      [CIFS] file create with acl support enabled is slow · 8b1327f6
      由 Steve French 提交于 
      Shirish Pargaonkar noted:
With cifsacl mount option, when a file is created on the Windows server,
exclusive oplock is broken right away because the get cifs acl code
again opens the file to obtain security descriptor.
The client does not have the newly created file handle or inode in any
of its lists yet so it does not respond to oplock break and server waits for
its duration and then responds to the second open. This slows down file
creation signficantly.  The fix is to pass the file descriptor to the get
cifsacl code wherever available so that get cifs acl code does not send
second open (NT Create ANDX) and oplock is not broken.

CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      8b1327f6