- 30 7月, 2009 17 次提交
-
-
由 Eero Nurkkala 提交于
When data is read through DMA, the last element must be read separately through the RX register. It cannot be transferred by the DMA. For further details see e.g. OMAP35x TRM (table 19-16). Without the fix the driver causes extra clocks to be clocked to the bus after DMA RX operations. This can cause interesting behaviour with some devices. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> [aaro.koskinen@nokia.com: Simplified the patch while keeping the idea.] Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jouni Hogander 提交于
Currently mcspi wake-ups are not enabled. This might cause cases where OMAP is not waking up on mcspi events. Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
Fixed off-by-one bug in loop indexes - some elements beyond windows' array were accessed, which might result in memory access violations when removing/suspending the device. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lu Zhihe 提交于
Intel X38 MCHBAR is a 64bits register, base from 0x48, so its higher base is 0x4C. Signed-off-by: NLu Zhihe <tombowfly@gmail.com> Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: <stable@kernel.org> [2.6.30.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hidetoshi Seto 提交于
Setting "crashkernel=512M-2G:64M,2G-:128M" does not work but it turns to work if it has a trailing-whitespace, like "crashkernel=512M-2G:64M,2G-:128M ". It was because of a bug in the parser, running over the cmdline. This patch adds a check of the termination. Reported-by: NJin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Tested-by: NJin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rik van Riel 提交于
Fix a post-2.6.31 regression which was introduced by 2ff05b2b ("oom: move oom_adj value from task_struct to mm_struct"). After moving the oom_adj value from the task struct to the mm_struct, the oom_adj value was no longer properly inherited by child processes. Copying over the oom_adj value at fork time fixes that bug. [kosaki.motohiro@jp.fujitsu.com: test for current->mm before dereferencing it] Signed-off-by: NRik van Riel <riel@redhat.com> Reported-by: NPaul Menage <manage@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
If a task is oom killed and still cannot find memory when trying with no watermarks, it's better to fail the allocation attempt than to loop endlessly. Direct reclaim has already failed and the oom killer will be a no-op since current has yet to die, so there is no other alternative for allocations that are not __GFP_NOFAIL. Acked-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NDavid Rientjes <rientjes@google.com> Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Fix a post-2.6.24 performace regression caused by 3dfa5721 ("page-allocator: preserve PFN ordering when __GFP_COLD is set"). Narayanan reports "The regression is around 15%. There is no disk controller as our setup is based on Samsung OneNAND used as a memory mapped device on a OMAP2430 based board." The page allocator tries to preserve contiguous PFN ordering when returning pages such that repeated callers to the allocator have a strong chance of getting physically contiguous pages, particularly when external fragmentation is low. However, of the bulk of the allocations have __GFP_COLD set as they are due to aio_read() for example, then the PFNs are in reverse PFN order. This can cause performance degration when used with IO controllers that could have merged the requests. This patch attempts to preserve the contiguous ordering of PFNs for users of __GFP_COLD. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Reported-by: NNarayananu Gopalakrishnan <narayanan.g@samsung.com> Tested-by: NNarayanan Gopalakrishnan <narayanan.g@samsung.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
A 32-bit perl can't handle 64-bit addresses without using the BigInt package. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Objects passed to kmemleak_seq_next() have an incremented reference count (hence not freed) but they may point via object_list.next to other freed objects. To avoid this, the whole start/next/stop sequence must be protected by rcu_read_lock(). Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits) drm/radeon: set fb aperture sizes for framebuffer handoff. drm/ttm: fix highuser vs dma32 confusion. drm/radeon: Fix size used for benchmarking BO copies. drm/radeon: Add radeon.test parameter for running BO GPU copy tests. drm/radeon/kms: allow interruptible waits for objects. drm/ttm: powerpc: Fix Highmem cache flushing. x86: Export kmap_atomic_prot() needed for TTM. drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes. drm/ttm: Fix an oops and sync object leak. drm/radeon/kms: vram sizing on certain r100 chips needs workaround. drm/radeon: Pay more attention to object placement requested by userspace. drm/radeon: Fall back to evicting BOs with memcpy if necessary. drm/radeon: Don't unreserve twice on failure to validate. drm/radeon/kms: fix bandwidth computation on avivo hardware drm/radeon/kms: add initial colortiling support. drm/radeon/kms: fix hotspot handling on pre-avivo chips drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740 drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq drm/radeon/kms: block RN50 from using 3D engine. drm/radeon/kms: fix VRAM sizing like DDX does it. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6由 Linus Torvalds 提交于
* 'zero-length' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Remove zero-length file drivers/char/vr41xx_giu.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: accept late unlocking of HPA libata: Updates and fixes for pata_at91 driver ata_piix: Add new short cable ID ata_piix: Add new laptop short cable IDs ahci: add device IDs for Ibex Peak ahci controllers libata: remove superfluous NULL pointer checks libata: add missing NULL pointer check to ata_eh_reset() pata_pcmcia: add CNF-CDROM-ID
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: documentation: make it clear that sysfs is optional driver core: sysdev: do not send KOBJ_ADD uevent if kobject_init_and_add fails Dynamic debug: fix typo: -/-> driver core: firmware_class:fix memory leak of page pointers array sysfs: fix hardlink count on device_move
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: staging: udlfb: Add vmalloc.h include staging: remove aten2011 driver Staging: android: lowmemorykiller.c: fix it for "oom: move oom_adj value from task_struct to mm_struct" Staging: serqt_usb2: fix memory leak in error case Staging: serqt_usb2: add missing calls to tty_kref_put()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (34 commits) USB: xhci: Stall handling bug fixes. USB: xhci: Support for 64-byte contexts USB: xhci: Always align output device contexts to 64 bytes. USB: xhci: Scratchpad buffer allocation USB: Fix parsing of SuperSpeed Endpoint Companion descriptor. USB: xhci: Fail gracefully if there's no SS ep companion descriptor. USB: xhci: Handle babble errors on transfers. USB: xhci: Setup HW retries correctly. USB: xhci: Check if the host controller died in IRQ handler. USB: xhci: Don't oops if the host doesn't halt. USB: xhci: Make debugging more verbose. USB: xhci: Correct Event Handler Busy flag usage. USB: xhci: Handle short control packets correctly. USB: xhci: Represent 64-bit addresses with one u64. USB: xhci: Use GFP_ATOMIC while holding spinlocks. USB: xhci: Deal with stalled endpoints. USB: xhci: Set TD size in transfer TRB. USB: xhci: fix less- and greater than confusion USB: usbtest: no need for USB_DEVICEFS USB: musb: fix CONFIGDATA register read issue ...
-
由 OGAWA Hirofumi 提交于
We really don't want to mark the pty as a low-latency device, because as Alan points out, the ->write method can be called from an IRQ (ppp?), and that means we can't use ->low_latency=1 as we take mutexes in the low_latency case. So rather than using low_latency to force the written data to be pushed to the ldisc handling at 'write()' time, just make the reader side (or the poll function) do the flush when it checks whether there is data to be had. This also fixes the problem with lost data in an emacs compile buffer (bugzilla 13815), and we can thus revert the low_latency pty hack (commit 3a542974: "pty: quickfix for the pty ENXIO timing problems"). Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Tested-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [ Modified to do the tty_flush_to_ldisc() inside input_available_p() so that it triggers for both read and poll() - Linus] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 7月, 2009 23 次提交
-
-
由 Dave Airlie 提交于
This will allow efi/vesa to handoff to radeon. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
DMA32 and highmem are sort of exclusive. Noticed by AndrewR on #radeon. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
The incorrect size caused benchmark results to be inflated by a factor of 4. Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
If enabled, during initialization BO GTT->VRAM and VRAM->GTT GPU copies are tested across the whole GTT aperture. This has helped uncover the benchmark copy size bug and verify the maximum aperture size supported by the AGP bridge in my PowerBook. Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Blocking here isn't something the X server mouse appreciates, avoid the block and let userspace retry the waits. libdrm_radeon userspace library is also expecting EBUSY not ERESTART Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Temporarily maps highmem pages while flushing to get a valid virtual address to flush. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
This functionality is needed to kmap_atomic() highmem pages that may potentially have or are about to set up other mappings with non-standard caching attributes. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
For x86 this affected highmem pages only, since they were always kmapped cache-coherent, and this is fixed using kmap_atomic_prot(). For other architectures that may not modify the linear kernel map we resort to vmap() for now, since kmap_atomic_prot() generally uses the linear kernel map for lowmem pages. This of course comes with a performance impact and should be optimized when possible. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
The code was potentially dereferencig a NULL sync object pointer. At the same time a sync object reference was potentially leaked. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
If an rn50/r100/m6/m7 GPU has < 64MB RAM, i.e. 8/16/32, the aperture used to calculate the MC_FB_LOCATION needs to be worked out from the CONFIG_APER_SIZE register, and not the actual vram size. TTM VRAM size was also being initialised wrong, use actual vram size to initialise it. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
Previously we were basically always setting the GTT and VRAM flags regardless of what userspace requested. Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
Otherwise if there's no GTT space we would fail the eviction, leading to cascaded failure. Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
This is done later in radeon_object_list_unvalidate(). Doing it twice triggers a BUG in TTM, rendering X on KMS unusable until reboot. Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Fix bandwidth computation and crtc priority in memory controller so that crtc memory request are fullfill in time to avoid display artifact. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This adds new set/get tiling interfaces where the pitch and macro/micro tiling enables can be set. Along with a flag to decide if this object should have a surface when mapped. The only thing we need to allocate with a mapped surface should be the frontbuffer. Note rotate scanout shouldn't require one, and back/depth shouldn't either, though mesa needs some fixes. It fixes the TTM interfaces along Thomas's suggestions, and I've tested the surface stealing code with two X servers and not seen any lockdep issues. I've stopped tiling the fbcon frontbuffer, as I don't see there being any advantage other than testing, I've left the testing commands in there, just flip the fb_tiled to true in radeon_fb.c Open: Can we integrate endian swapping in with this? Future features: texture tiling - need to relocate texture registers TXOFFSET* with tiling info. This also merges Michel's cleanup surfaces regs at init time patch even though it makes sense on its own, this patch really relies on it. Some PowerMac firmwares set up a tiling surface at the beginning of VRAM which messes us up otherwise. that patch is: Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
On certain configurations, HPA isn't or can't be unlocked during probing but it somehow ends up unlocked afterwards. In the following thread, the problem can be reliably reproduced after resuming from STR. The BIOS turns on HPA during boot but forgets to do it during resume. http://thread.gmane.org/gmane.linux.kernel/858310 This patch updates libata revalidation such that it considers native n_sectors. If the device size has increased to match native n_sectors, it's assumed that HPA has been unlocked involuntarily and the device is recognized as the same one. This should be fairly safe while nicely working around the problem. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NChristof Warlich <christof@warlich.name> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sergey Matyukevich 提交于
Please consider the following updates and fixes for pata_at91 driver. * Removed extra headers Here we need only static memory controller properties, which are contained in generic header at91sam9_smc.h. No need to include any specific headers for at91sam9260 SoC. * No harsh BUG_ON for get_clk in set_smc_timing function get_clk is now performed in driver probing function, probing fails if master clock is not available * Fixed uint/ulong mess in calc_mck_cycles function Signed-off-by: NSergey Matyukevich <geomatsi@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Steve Conklin 提交于
OriginalAuthor: Tony Espy <espy@canonical.com> Signed-off-by: NSteve Conklin <sconklin@canonical.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Steve Conklin 提交于
OriginalAuthor: Michael Frey <michael.frey@canonical.com> Signed-off-by: NSteve Conklin <sconklin@canonical.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 David Milburn 提交于
Add device IDS for Ibex Peak SATA AHCI Controllers Signed-off-by: NJaroslav Kysela <jkysela@redhat.com> Signed-off-by: NDavid Milburn <dmilburn@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
host->ports[] always contain pointers to valid port structures since a "dummy port" structure is used in case if there is no physical port. This patch takes care of two entries from Dan's list: drivers/ata/sata_sil.c +535 sil_interrupt(13) warning: variable derefenced before check 'ap' drivers/ata/sata_mv.c +2517 mv_unexpected_intr(6) warning: variable derefenced before check 'ap' and of another needless NULL pointer check in pata_octeon_cf.c. Reported-by: NDan Carpenter <error27@gmail.com> Cc: corbet@lwn.net Cc: eteo@redhat.com Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
drivers/ata/libata-eh.c +2403 ata_eh_reset(80) warning: variable derefenced before check 'slave' Please note that this is _not_ a real bug at the moment since ata_eh_context structure is embedded into ata_list structure and the code alwas checks for 'slave' before accessing 'sehc'. Anyway lets add missing check and always have a valid 'sehc' pointer (which makes code easier to understand and prevents introducing some possible bugs in the future). Reported-by: NDan Carpenter <error27@gmail.com> Cc: corbet@lwn.net Cc: eteo@redhat.com Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-