Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 13 10月, 2007 1 次提交
    • T
      x86: Fix irq0 / local apic timer accounting · 3c9aea47
      由 Thomas Gleixner 提交于 
      The clock events merge introduced a change to the nmi watchdog code to
handle the not longer increasing local apic timer count in the
broadcast mode. This is fine for UP, but on SMP it pampers over a
stuck CPU which is not handling the broadcast interrupt due to the
unconditional sum up of local apic timer count and irq0 count.

To cover all cases we need to keep track on which CPU irq0 is
handled. In theory this is CPU#0 due to the explicit disabling of irq
balancing for irq0, but there are systems which ignore this on the
hardware level. The per cpu irq0 accounting allows us to remove the
irq0 to CPU0 binding as well.

Add a per cpu counter for irq0 and evaluate this instead of the global
irq0 count in the nmi watchdog code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
      3c9aea47
  3. 11 10月, 2007 2 次提交
  5. 22 7月, 2007 1 次提交
  7. 03 5月, 2007 1 次提交
    • T
      [PATCH] i386: pit_latch_buggy has no effect · f5e88615
      由 takada 提交于 
      Eliminated the arch/i386/kernel/timers in 2.6.18, use clocksoures instead.
pit_latch_buggy was referred in timers/timer_tsc.c, and currently removed.
Therefore nobody refer it.

Until 2.6.17, MediaGX's TSC works correctly.  after 2.6.18, warned "TSC
appears to be running slowly.  Marking it as unstable".  So marked unstable
TSC when CS55x0.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
      f5e88615
  9. 05 3月, 2007 2 次提交
    • J
      [PATCH] clocksource init adjustments (fix bug #7426) · 6bb74df4
      由 john stultz 提交于 
      This patch resolves the issue found here:
http://bugme.osdl.org/show_bug.cgi?id=7426

The basic summary is:
Currently we register most of i386/x86_64 clocksources at module_init
time. Then we enable clocksource selection at late_initcall time. This
causes some problems for drivers that use gettimeofday for init
calibration routines (specifically the es1968 driver in this case),
where durring module_init, the only clocksource available is the low-res
jiffies clocksource. This may cause slight calibration errors, due to
the small sampling time used.

It should be noted that drivers that require fine grained time may not
function on architectures that do not have better then jiffies
resolution timekeeping (there are a few). However, this does not
discount the reasonable need for such fine-grained timekeeping at init
time.

Thus the solution here is to register clocksources earlier (ideally when
the hardware is being initialized), and then we enable clocksource
selection at fs_initcall (before device_initcall).

This patch should probably get some testing time in -mm, since
clocksource selection is one of the most important issues for correct
timekeeping, and I've only been able to test this on a few of my own
boxes.
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6bb74df4
    • Z
      [PATCH] vmi: pit override · e30fab3a
      由 Zachary Amsden 提交于 
      The time_init_hook in paravirt-ops no longer functions in the correct manner
after the integration of the hrtimers code.  The problem is that now the call
path for time initialization is:

  time_init :
       late_time_init = hpet_time_init;

  late_time_init -> hpet_time_init:
       setup_pit_timer (BAD)
       do_time_init --> (via paravirt.h)
          time_init_hook --> (via arch_hooks.h)
              time_init_hook (in SUBARCH/setup.c)

If this isn't confusing enough, the paravirt case goes through an indirect
function pointer in the paravirt-ops table.  The problem is, by the time the
paravirt hook is called, the pit timer is already enabled.

But paravirt guests have their own timer, and don't want to use the PIT.
Rather than intensify the struggle for power going on here, just make it all
nice and simple and just unconditionally do all timer setup in the
late_time_init hook.  This also has the advantage of enabling timers in the
same place in all code paths, so everyone has the same bugs and we don't have
outliers who break other code because they turn on timer too early or too
late.

So the paravirt-ops time init function is now by default hpet_time_init, which
is the time init function used for native hardware.  Paravirt guests have the
chance to override this when they setup the paravirt-ops table, and should
need no change.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e30fab3a
  11. 17 2月, 2007 2 次提交
  13. 13 2月, 2007 2 次提交
    • Z
      [PATCH] i386: Profile pc badness · 7b355202
      由 Zachary Amsden 提交于 
      Profile_pc was broken when using paravirtualization because the
assumption the kernel was running at CPL 0 was violated, causing
bad logic to read a random value off the stack.

The only way to be in kernel lock functions is to be in kernel
code, so validate that assumption explicitly by checking the CS
value.  We don't want to be fooled by BIOS / APM segments and
try to read those stacks, so only match KERNEL_CS.

I moved some stuff in segment.h to make it prettier.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      7b355202
    • Z
      [PATCH] i386: vMI timer patches · bbab4f3b
      由 Zachary Amsden 提交于 
      VMI timer code.  It works by taking over the local APIC clock when APIC is
configured, which requires a couple hooks into the APIC code.  The backend
timer code could be commonized into the timer infrastructure, but there are
some pieces missing (stolen time, in particular), and the exact semantics of
when to do accounting for NO_IDLE need to be shared between different
hypervisors as well.  So for now, VMI timer is a separate module.

[Adrian Bunk: cleanups]

Subject: VMI timer patches
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
      bbab4f3b
  15. 07 12月, 2006 1 次提交
    • R
      [PATCH] paravirt: header and stubs for paravirtualisation · d3561b7f
      由 Rusty Russell 提交于 
      Create a paravirt.h header for all the critical operations which need to be
replaced with hypervisor calls, and include that instead of defining native
operations, when CONFIG_PARAVIRT.

This patch does the dumbest possible replacement of paravirtualized
instructions: calls through a "paravirt_ops" structure.  Currently these are
function implementations of native hardware: hypervisors will override the ops
structure with their own variants.

All the pv-ops functions are declared "fastcall" so that a specific
register-based ABI is used, to make inlining assember easier.

And:

+From: Andy Whitcroft <apw@shadowen.org>

The paravirt ops introduce a 'weak' attribute onto memory_setup().
Code ordering leads to the following warnings on x86:

    arch/i386/kernel/setup.c:651: warning: weak declaration of
                `memory_setup' after first use results in unspecified behavior

Move memory_setup() to avoid this.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
      d3561b7f
  17. 07 10月, 2006 1 次提交
  19. 05 10月, 2006 1 次提交
    • D
      IRQ: Maintain regs pointer globally rather than passing to IRQ handlers · 7d12e780
      由 David Howells 提交于 
      Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
      7d12e780
  21. 01 10月, 2006 1 次提交
    • A
      [PATCH] kill wall_jiffies · 8ef38609
      由 Atsushi Nemoto 提交于 
      With 2.6.18-rc4-mm2, now wall_jiffies will always be the same as jiffies.
So we can kill wall_jiffies completely.

This is just a cleanup and logically should not change any real behavior
except for one thing: RTC updating code in (old) ppc and xtensa use a
condition "jiffies - wall_jiffies == 1".  This condition is never met so I
suppose it is just a bug.  I just remove that condition only instead of
kill the whole "if" block.

[heiko.carstens@de.ibm.com: s390 build fix and cleanup]
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      8ef38609
  23. 26 9月, 2006 3 次提交
  25. 29 7月, 2006 1 次提交
    • A
      [PATCH] i386/x86-64: Add user_mode checks to profile_pc for oprofile · d5a26017
      由 Andi Kleen 提交于 
      Fixes a obscure user space triggerable crash during oprofiling.

Oprofile calls profile_pc from NMIs even when user_mode(regs) is not true and
the program counter is inside the kernel lock section. This opens
a race - when a user program jumps to a kernel lock address and
a NMI happens before the illegal page fault exception is raised
and the program has a unmapped esp or ebp then the kernel could
oops. NMIs have a higher priority than exceptions so that could
happen.

Add user_mode checks to i386/x86-64 profile_pc to prevent that.

Cc: John Levon <levon@movementarian.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      d5a26017
  27. 11 7月, 2006 1 次提交
  29. 01 7月, 2006 1 次提交
  31. 27 6月, 2006 3 次提交
  33. 07 3月, 2006 1 次提交
  35. 12 1月, 2006 1 次提交
  37. 01 11月, 2005 1 次提交
  39. 31 10月, 2005 2 次提交
  41. 10 9月, 2005 1 次提交
  43. 08 9月, 2005 3 次提交
  45. 05 9月, 2005 1 次提交
  47. 08 7月, 2005 1 次提交
  49. 30 6月, 2005 1 次提交
  51. 24 6月, 2005 2 次提交
  53. 01 5月, 2005 1 次提交
    • J
      [PATCH] i386: fix hpet for systems that don't support legacy replacement · 35492df5
      由 john stultz 提交于 
      Currently the i386 HPET code assumes the entire HPET implementation from
the spec is present.  This breaks on boxes that do not implement the
optional legacy timer replacement functionality portion of the spec.

This patch, which is very similar to my x86-64 patch for the same issue,
fixes the problem allowing i386 systems that cannot use the HPET for the
timer interrupt and RTC to still use the HPET as a time source.  I've
tested this patch on a system systems without HPET, with HPET but without
legacy timer replacement, as well as HPET with legacy timer replacement.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      35492df5
  55. 17 4月, 2005 1 次提交