Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 11月, 2011 2 次提交
    • J
      treewide: use __printf not __attribute__((format(printf,...))) · b9075fa9
      由 Joe Perches 提交于 
      Standardize the style for compiler based printf format verification.
Standardized the location of __printf too.

Done via script and a little typing.

$ grep -rPl --include=*.[ch] -w "__attribute__" * | \
  grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \
  xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }'

[akpm@linux-foundation.org: revert arch bits]
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b9075fa9
    • P
      include: replace linux/module.h with "struct module" wherever possible · de477254
      由 Paul Gortmaker 提交于 
      The <linux/module.h> pretty much brings in the kitchen sink along
with it, so it should be avoided wherever reasonably possible in
terms of being included from other commonly used <linux/something.h>
files, as it results in a measureable increase on compile times.

The worst culprit was probably device.h since it is used everywhere.
This file also had an implicit dependency/usage of mutex.h which was
masked by module.h, and is also fixed here at the same time.

There are over a dozen other headers that simply declare the
struct instead of pulling in the whole file, so follow their lead
and simply make it a few more.

Most of the implicit dependencies on module.h being present by
these headers pulling it in have been now weeded out, so we can
finally make this change with hopefully minimal breakage.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      de477254
  3. 15 10月, 2011 1 次提交
  5. 10 10月, 2011 1 次提交
  7. 09 10月, 2011 2 次提交
  9. 07 10月, 2011 1 次提交
  11. 06 10月, 2011 5 次提交
  13. 05 10月, 2011 2 次提交
  15. 04 10月, 2011 3 次提交
  17. 28 9月, 2011 2 次提交
    • T
      ALSA: pcm - Export snd_pcm_lib_default_mmap() helper · 18a2b962
      由 Takashi Iwai 提交于 
      Export the default mmap function, snd_pcm_lib_default_mmap().
The upcoming non-snooping support in HD-audio driver will use this
to override the mmap method.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      18a2b962
    • M
      ASoC: Allow DAI formats to be specified in the dai_link · 75d9ac46
      由 Mark Brown 提交于 
      For almost all machines the DAI format is a constant, always set to the
same thing. This means that not only should we normally set it on init
rather than in hw_params() (where it has been for historical reasons) we
should also allow users to configure this by setting a variable in the
dai_link structure. The combination of these two will make many machine
drivers even more data driven.

Implement a new dai_fmt field in the dai_link doing just that. Since 0 is
a valid value for many format flags and we need to be able to tell if the
field is actually set also add one to all the values used to configure
formats.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      75d9ac46
  19. 24 9月, 2011 1 次提交
  21. 23 9月, 2011 1 次提交
  23. 22 9月, 2011 1 次提交
  25. 21 9月, 2011 3 次提交
  27. 20 9月, 2011 3 次提交
  29. 14 9月, 2011 1 次提交
    • C
      ALSA: mpu401: clean up interrupt specification · dba8b469
      由 Clemens Ladisch 提交于 
      The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      dba8b469
  31. 31 8月, 2011 2 次提交
  33. 25 8月, 2011 2 次提交
  35. 23 8月, 2011 1 次提交
  37. 16 8月, 2011 1 次提交
  39. 12 8月, 2011 1 次提交
  41. 08 8月, 2011 3 次提交
  43. 28 7月, 2011 1 次提交