- 30 7月, 2016 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull more cgroup updates from Tejun Heo: "I forgot to include the patches which got applied to for-4.7-fixes late during last cycle. Eric's three patches fix bugs introduced with the namespace support" * 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroupns: Only allow creation of hierarchies in the initial cgroup namespace cgroupns: Close race between cgroup_post_fork and copy_cgroup_ns cgroupns: Fix the locking in copy_cgroup_ns
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide由 Linus Torvalds 提交于
Pull IDE updates from David Miller: "Just a couple small bug fixes, nothing overly exciting in here" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: missing break statement in set_timings_mdma() ide: hpt366: fix incorrect mask when checking at cmd_high_time ide-tape: fix misprint in failure handling in idetape_init() cmd640: add __init attribute
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc updates from David Miller: 1) Double spin lock bug in sunhv serial driver, from Dan Carpenter. 2) Use correct RSS estimate when determining whether to grow the huge TSB or not, from Mike Kravetz. 3) Don't use full three level page tables for hugepages, PMD level is sufficient. From Nitin Gupta. 4) Mask out extraneous bits from TSB_TAG_ACCESS register, we only want the address bits. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Trim page tables for 8M hugepages sparc64 mm: Fix base TSB sizing when hugetlb pages are used sparc: serial: sunhv: fix a double lock bug sparc32: off by ones in BUG_ON() sparc: Don't leak context bits into thread->fault_address
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC updates from Vineet Gupta: "Things have been calm here - nothing much except for a few fixes" * tag 'arc-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: mm: don't loose PTE_SPECIAL in pte_modify() ARC: dma: fix address translation in arc_dma_free ARC: typo fix in mm/ioremap.c ARC: fix linux-next build breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32由 Linus Torvalds 提交于
Pull AVR32 updates from Hans-Christian Noren Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: off by one in at32_init_pio() avr32: fixup code style in unistd.h and syscall_table.S avr32: wire up preadv2 and pwritev2 syscalls
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM updates from Russell King: "Included in this update are: - Patches from Gregory Clement to fix the coherent DMA cases in our dma-mapping code. - A number of CPU errata updates and fixes. - ARM cpuidle improvements from Jisheng Zhang. - Fix from Kees for the location of _etext. - Cleanups from Masahiro Yamada to avoid duplicated messages during the kernel build, and remove CONFIG_ARCH_HAS_BARRIERS. - Remove a udelay loop limitation, allowing for faster CPUs to calibrate the delay correctly. - Cleanup some left-overs from the SW PAN implementation. - Ensure that a modified address limit is not visible to exception handlers" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits) ARM: 8586/1: cpuidle: make arm_cpuidle_suspend() a bit more efficient ARM: 8585/1: cpuidle: fix !cpuidle_ops[cpu].init case during init ARM: 8561/4: dma-mapping: Fix the coherent case when iommu is used ARM: 8561/3: dma-mapping: Don't use outer_flush_range when the L2C is coherent ARM: 8560/1: errata: Workaround errata A12 825619 / A17 852421 ARM: 8559/1: errata: Workaround erratum A12 821420 ARM: 8558/1: errata: Workaround errata A12 818325/852422 A17 852423 ARM: save and reset the address limit when entering an exception ARM: 8577/1: Fix Cortex-A15 798181 errata initialization ARM: 8584/1: floppy: avoid gcc-6 warning ARM: 8583/1: mm: fix location of _etext ARM: 8582/1: remove unused CONFIG_ARCH_HAS_BARRIERS ARM: 8306/1: loop_udelay: remove bogomips value limitation ARM: 8581/1: add missing <asm/prom.h> to arch/arm/kernel/devtree.c ARM: 8576/1: avoid duplicating "Kernel: arch/arm/boot/*Image is ready" ARM: 8556/1: on a generic DT system: do not touch l2x0 ARM: uaccess: remove put_user() code duplication ARM: 8580/1: Remove orphaned __addr_ok() definition ARM: get rid of horrible *(unsigned int *)(regs + 1) ARM: introduce svc_pt_regs structure ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse updates from Miklos Szeredi: "This fixes error propagation from writeback to fsync/close for writeback cache mode as well as adding a missing capability flag to the INIT message. The rest are cleanups. (The commits are recent but all the code actually sat in -next for a while now. The recommits are due to conflict avoidance and the addition of Cc: stable@...)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use filemap_check_errors() mm: export filemap_check_errors() to modules fuse: fix wrong assignment of ->flags in fuse_send_init() fuse: fuse_flush must check mapping->flags for errors fuse: fsync() did not return IO errors fuse: don't mess with blocking signals new helper: wait_event_killable_exclusive() fuse: improve aio directIO write performance for size extending writes
-
由 Linus Torvalds 提交于
This reverts commit 3c9fe8cd. As Miklos points out in commit c1b2cc1a, the "lookup_hash()" helper is now unused, and in fact, with the hash salting changes, since the hash of a dentry name now depends on the directory dentry it is in, the helper function isn't even really likely to be useful. So rather than keep it around in case somebody else might end up finding a use for it, let's just remove the helper and not trick people into thinking it might be a useful thing. For example, I had obviously completely missed how the helper didn't follow the normal dentry hashing patterns, and how the hash salting patch broke overlayfs. Things would quietly build and look sane, but not work. Suggested-by: NMiklos Szeredi <mszeredi@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs update from Miklos Szeredi: "First of all, this fixes a regression in overlayfs introduced by the dentry hash salting. I've moved the patch fixing this to the front of the queue, so if (god forbid) something needs to be bisected in overlayfs this regression won't interfere with that. The biggest part is preparation for selinux support, done by Vivek Goyal. Essentially this makes all operations on underlying filesystems be done with credentials of mounter. This makes everything nicely consistent. There are also fixes for a number of known and recently discovered non-standard behavior (thanks to Eryu Guan for testing and improving the test suites)" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (23 commits) ovl: simplify empty checking qstr: constify instances in overlayfs ovl: clear nlink on rmdir ovl: disallow overlayfs as upperdir ovl: fix warning ovl: remove duplicated include from super.c ovl: append MAY_READ when diluting write checks ovl: dilute permission checks on lower only if not special file ovl: fix POSIX ACL setting ovl: share inode for hard link ovl: store real inode pointer in ->i_private ovl: permission: return ECHILD instead of ENOENT ovl: update atime on upper ovl: fix sgid on directory ovl: simplify permission checking ovl: do not require mounter to have MAY_WRITE on lower ovl: do operations on underlying file system in mounter's context ovl: modify ovl_permission() to do checks on two inodes ovl: define ->get_acl() for overlay inodes ovl: move some common code in a function ...
-
git://git.infradead.org/users/hch/freevxfs由 Linus Torvalds 提交于
Pull freevxfs updates from Christoph Hellwig: "Support for foreign endianess and HP-UP superblocks from Krzysztof Błaszkowski" * tag 'freevxfs-for-4.8' of git://git.infradead.org/users/hch/freevxfs: freevxfs: update Kconfig information freevxfs: refactor readdir and lookup code freevxfs: fix lack of inode initialization freevxfs: fix memory leak in vxfs_read_fshead() freevxfs: update documentation and cresdits for HP-UX support freevxfs: implement ->alloc_inode and ->destroy_inode freevxfs: avoid the need for forward declaring the super operations freevxfs: move VFS inode allocation into vxfs_blkiget and vxfs_stiget freevxfs: remove vxfs_put_fake_inode freevxfs: handle big endian HP-UX file systems
-
git://git.infradead.org/users/hch/configfs由 Linus Torvalds 提交于
Pull configfs update from Christoph Hellwig: "A simple error handling fix from Tal Shorer" * tag 'configfs-for-4.8' of git://git.infradead.org/users/hch/configfs: configfs: don't set buffer_needs_fill to zero if show() returns error
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS/SMB3 fixes from Steve French: "Various CIFS/SMB3 fixes, most for stable" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix a possible invalid memory access in smb2_query_symlink() fs/cifs: make share unaccessible at root level mountable cifs: fix crash due to race in hmac(md5) handling cifs: unbreak TCP session reuse cifs: Check for existing directory when opening file with O_CREAT Add MF-Symlinks support for SMB 2.0
-
由 Nitin Gupta 提交于
For PMD aligned (8M) hugepages, we currently allocate all four page table levels which is wasteful. We now allocate till PMD level only which saves memory usage from page tables. Also, when freeing page table for 8M hugepage backed region, make sure we don't try to access non-existent PTE level. Orabug: 22630259 Signed-off-by: NNitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 7月, 2016 26 次提交
-
-
由 Miklos Szeredi 提交于
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
Can be used by fuse, btrfs and f2fs to replace opencoded variants. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Wei Fang 提交于
FUSE_HAS_IOCTL_DIR should be assigned to ->flags, it may be a typo. Signed-off-by: NWei Fang <fangwei1@huawei.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Fixes: 69fe05c9 ("fuse: add missing INIT flags") Cc: <stable@vger.kernel.org>
-
由 Maxim Patlasov 提交于
fuse_flush() calls write_inode_now() that triggers writeback, but actual writeback will happen later, on fuse_sync_writes(). If an error happens, fuse_writepage_end() will set error bit in mapping->flags. So, we have to check mapping->flags after fuse_sync_writes(). Signed-off-by: NMaxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Fixes: 4d99ff8f ("fuse: Turn writeback cache on") Cc: <stable@vger.kernel.org> # v3.15+
-
由 Alexey Kuznetsov 提交于
Due to implementation of fuse writeback filemap_write_and_wait_range() does not catch errors. We have to do this directly after fuse_sync_writes() Signed-off-by: NAlexey Kuznetsov <kuznet@virtuozzo.com> Signed-off-by: NMaxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Fixes: 4d99ff8f ("fuse: Turn writeback cache on") Cc: <stable@vger.kernel.org> # v3.15+
-
由 Miklos Szeredi 提交于
The empty checking logic is duplicated in ovl_check_empty_and_clear() and ovl_remove_and_whiteout(), except the condition for clearing whiteouts is different: ovl_check_empty_and_clear() checked for being upper ovl_remove_and_whiteout() checked for merge OR lower Move the intersection of those checks (upper AND merge) into ovl_check_empty_and_clear() and simplify ovl_remove_and_whiteout(). Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
To make delete notification work on fa/inotify. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
This does not work and does not make sense. So instead of fixing it (probably not hard) just disallow. Reported-by: NAndrei Vagin <avagin@gmail.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
-
由 Miklos Szeredi 提交于
There's a superfluous newline in the warning message in ovl_d_real(). Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Wei Yongjun 提交于
Remove duplicated include. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Vivek Goyal 提交于
Right now we remove MAY_WRITE/MAY_APPEND bits from mask if realfile is on lower/. This is done as files on lower will never be written and will be copied up. But to copy up a file, mounter should have MAY_READ permission otherwise copy up will fail. So set MAY_READ in mask when MAY_WRITE is reset. Dan Walsh noticed this when he did access(lowerfile, W_OK) and it returned True (context mounts) but when he tried to actually write to file, it failed as mounter did not have permission on lower file. [SzM] don't set MAY_READ if only MAY_APPEND is set without MAY_WRITE; this won't trigger a copy-up. Reported-by: NDan Walsh <dwalsh@redhat.com> Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Vivek Goyal 提交于
Right now if file is on lower/, we remove MAY_WRITE/MAY_APPEND bits from mask as lower/ will never be written and file will be copied up. But this is not true for special files. These files are not copied up and are opened in place. So don't dilute the checks for these types of files. Reported-by: NDan Walsh <dwalsh@redhat.com> Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
Setting POSIX ACL needs special handling: 1) Some permission checks are done by ->setxattr() which now uses mounter's creds ("ovl: do operations on underlying file system in mounter's context"). These permission checks need to be done with current cred as well. 2) Setting ACL can fail for various reasons. We do not need to copy up in these cases. In the mean time switch to using generic_setxattr. [Arnd Bergmann] Fix link error without POSIX ACL. posix_acl_from_xattr() doesn't have a 'static inline' implementation when CONFIG_FS_POSIX_ACL is disabled, and I could not come up with an obvious way to do it. This instead avoids the link error by defining two sets of ACL operations and letting the compiler drop one of the two at compile time depending on CONFIG_FS_POSIX_ACL. This avoids all references to the ACL code, also leading to smaller code. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
To get from overlay inode to real inode we currently use 'struct ovl_entry', which has lifetime connected to overlay dentry. This is okay, since each overlay dentry had a new overlay inode allocated. Following patch will break that assumption, so need to leave out ovl_entry. This patch stores the real inode directly in i_private, with the lowest bit used to indicate whether the inode is upper or lower. Lifetime rules remain, using ovl_inode_real() must only be done while caller holds ref on overlay dentry (and hence on real dentry), or within RCU protected regions. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
The error is due to RCU and is temporary. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
Fix atime update logic in overlayfs. This patch adds an i_op->update_time() handler to overlayfs inodes. This forwards atime updates to the upper layer only. No atime updates are done on lower layers. Remove implicit atime updates to underlying files and directories with O_NOATIME. Remove explicit atime update in ovl_readlink(). Clear atime related mnt flags from cloned upper mount. This means atime updates are controlled purely by overlayfs mount options. Reported-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
When creating directory in workdir, the group/sgid inheritance from the parent dir was omitted completely. Fix this by calling inode_init_owner() on overlay inode and using the resulting uid/gid/mode to create the file. Unfortunately the sgid bit can be stripped off due to umask, so need to reset the mode in this case in workdir before moving the directory in place. Reported-by: NEryu Guan <eguan@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
The fact that we always do permission checking on the overlay inode and clear MAY_WRITE for checking access to the lower inode allows cruft to be removed from ovl_permission(). 1) "default_permissions" option effectively did generic_permission() on the overlay inode with i_mode, i_uid and i_gid updated from underlying filesystem. This is what we do by default now. It did the update using vfs_getattr() but that's only needed if the underlying filesystem can change (which is not allowed). We may later introduce a "paranoia_mode" that verifies that mode/uid/gid are not changed. 2) splitting out the IS_RDONLY() check from inode_permission() also becomes unnecessary once we remove the MAY_WRITE from the lower inode check. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Vivek Goyal 提交于
Now we have two levels of checks in ovl_permission(). overlay inode is checked with the creds of task while underlying inode is checked with the creds of mounter. Looks like mounter does not have to have WRITE access to files on lower/. So remove the MAY_WRITE from access mask for checks on underlying lower inode. This means task should still have the MAY_WRITE permission on lower inode and mounter is not required to have MAY_WRITE. It also solves the problem of read only NFS mounts being used as lower. If __inode_permission(lower_inode, MAY_WRITE) is called on read only NFS, it fails. By resetting MAY_WRITE, check succeeds and case of read only NFS shold work with overlay without having to specify any special mount options (default permission). Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Vivek Goyal 提交于
Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Vivek Goyal 提交于
Right now ovl_permission() calls __inode_permission(realinode), to do permission checks on real inode and no checks are done on overlay inode. Modify it to do checks both on overlay inode as well as underlying inode. Checks on overlay inode will be done with the creds of calling task while checks on underlying inode will be done with the creds of mounter. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Vivek Goyal 提交于
Now we are planning to do DAC permission checks on overlay inode itself. And to make it work, we will need to make sure we can get acls from underlying inode. So define ->get_acl() for overlay inodes and this in turn calls into underlying filesystem to get acls, if any. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Vivek Goyal 提交于
ovl_create_upper() and ovl_create_over_whiteout() seem to be sharing some common code which can be moved into a separate function. No functionality change. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Andreas Gruenbacher 提交于
Previously this was only done for directory inodes. Doing so for all inodes makes for a nice cleanup in ovl_permission at zero cost. Inodes are not shared for hard links on the overlay, so this works fine. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-