- 28 4月, 2012 8 次提交
-
-
由 Fred Isaman 提交于
This also has the advantage that it allows directio to use pnfs. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_write_data, and have (possibly multiple) nfs_write_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_write_header as a way to preallocate a single nfs_write_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_write_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_read_data, and have (possibly multiple) nfs_read_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_read_header as a way to preallocate a single nfs_read_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_read_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Both nfs_read_data and nfs_write_data devote several fields which can be combined into a single shared struct. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
In order to avoid duplicating all the data in nfs_read_data whenever we split it up into multiple RPC calls (either due to a short read result or due to rsize < PAGE_SIZE), we split out the bits that are the same per RPC call into a separate "header" structure. The goal this patch moves towards is to have a single header refcounted by several rpc_data structures. Thus, want to always refer from rpc_data to the header, and not the other way. This patch comes close to that ideal, but the directio code currently needs some special casing, isolated in the nfs_direct_[read_write]hdr_release() functions. This will be dealt with in a future patch. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Commits don't need the vectors of pages, etc. that writes do. Split out a separate structure for the commit operation. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 3月, 2012 1 次提交
-
-
由 David Howells 提交于
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 21 3月, 2012 2 次提交
-
-
由 Bryan Schumaker 提交于
This is an NFS v4 specific operation, so it belongs in the NFS v4 code and not the generic client. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This is an NFS v4 specific operation, so it belongs in the NFS v4 code and not the generic client. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2011 1 次提交
-
-
由 Al Viro 提交于
just dentry, please... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 12 3月, 2011 2 次提交
-
-
由 Konstantin Khlebnikov 提交于
Account NFS direct-io reads and writes into Task I/O Accounting. Do it before complition to handle aio. NFS have unusual direct-io implementation, thus accounting in generic code does not work. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The code was doing nothing more in either branch of the if. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 1月, 2011 1 次提交
-
-
由 Chuck Lever 提交于
Nick Piggin reports: > I'm getting use after frees in aio code in NFS > > [ 2703.396766] Call Trace: > [ 2703.396858] [<ffffffff8100b057>] ? native_sched_clock+0x27/0x80 > [ 2703.396959] [<ffffffff8108509e>] ? put_lock_stats+0xe/0x40 > [ 2703.397058] [<ffffffff81088348>] ? lock_release_holdtime+0xa8/0x140 > [ 2703.397159] [<ffffffff8108a2a5>] lock_acquire+0x95/0x1b0 > [ 2703.397260] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60 > [ 2703.397361] [<ffffffff81039701>] ? get_parent_ip+0x11/0x50 > [ 2703.397464] [<ffffffff81612a31>] _raw_spin_lock_irq+0x41/0x80 > [ 2703.397564] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60 > [ 2703.397662] [<ffffffff811627db>] aio_put_req+0x2b/0x60 > [ 2703.397761] [<ffffffff811647fe>] do_io_submit+0x2be/0x7c0 > [ 2703.397895] [<ffffffff81164d0b>] sys_io_submit+0xb/0x10 > [ 2703.397995] [<ffffffff8100307b>] system_call_fastpath+0x16/0x1b > > Adding some tracing, it is due to nfs completing the request then > returning something other than -EIOCBQUEUED, so aio.c > also completes the request. To address this, prevent the NFS direct I/O engine from completing async iocbs when the forward path returns an error without starting any I/O. This fix appears to survive ^C during both "xfstest no. 208" and "fsx -Z." It's likely this bug has existed for a very long while, as we are seeing very similar symptoms in OEL 5. Copying stable. Cc: Stable <stable@kernel.org> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 11月, 2010 1 次提交
-
-
由 Arun Bharadwaj 提交于
When an application opens a file with O_DIRECT flag, if the size of the data that is written is equal to wsize, the client sends a WRITE RPC with stable flag set to UNSTABLE followed by a single COMMIT RPC rather than sending a single WRITE RPC with the stable flag set to FILE_SYNC. This a bug. Patch to fix this. Signed-off-by: NArun R Bharadwaj <arun@linux.vnet.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 10月, 2010 1 次提交
-
-
由 Steve Dickson 提交于
A typo, introduced by commit f11ac8db, in the nfs_direct_write() routine causes writes with O_DIRECT set to fail with a ENOMEM error. Found-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve Dickson <steved@redhat.com> Cc: stable@kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 31 7月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
This patch fixes bugzilla entry 14501: https://bugzilla.kernel.org/show_bug.cgi?id=14501Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 16 2月, 2010 1 次提交
-
-
由 Chuck Lever 提交于
The cached read and write paths initialize fattr->time_start in their setup procedures. The value of fattr->time_start is propagated to read_cache_jiffies by nfs_update_inode(). Subsequent calls to nfs_attribute_timeout() will then use a good time stamp when computing the attribute cache timeout, and squelch unneeded GETATTR calls. Since the direct I/O paths erroneously leave the inode's fattr->time_start field set to zero, read_cache_jiffies for that inode is set to zero after any direct read or write operation. This triggers an otw GETATTR or ACCESS call to update the file's attribute and access caches properly, even when the NFS READ or WRITE replies have usable post-op attributes. Make sure the direct read and write setup code performs the same fattr initialization as the cached I/O paths to prevent unnecessary GETATTR calls. This was likely introduced by commit 0e574af1 in 2.6.15, which appears to add new nfs_fattr_init() call sites in the cached read and write paths, but not in the equivalent places in fs/nfs/direct.c. A subsequent commit in the same series, 33801147, introduces the fattr->time_start field. Interestingly, the direct write reschedule path already has a call to nfs_fattr_init() in the right place. Reported-by: NQuentin Barnes <qbarnes@yahoo-inc.com> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: stable@kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 10月, 2009 1 次提交
-
-
由 Terry Loftin 提交于
Actually pass the NFS_FILE_SYNC option to the server to avoid a Panic in nfs_direct_write_complete() when a commit fails. At the end of an nfs write, if the nfs commit fails, all the writes will be rescheduled. They are supposed to be rescheduled as NFS_FILE_SYNC writes, but the rpc_task structure is not completely intialized and so the option is not passed. When the rescheduled writes complete, the return indicates that they are NFS_UNSTABLE and we try to do another commit. This leads to a Panic because the commit data structure pointer was set to null in the initial (failed) commit attempt. Signed-off-by: NTerry Loftin <terry.loftin@hp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 8月, 2009 1 次提交
-
-
由 Jan Kara 提交于
generic_file_direct_write() no longer calls generic_osync_inode() so remove the comment. CC: linux-nfs@vger.kernel.org CC: Neil Brown <neilb@suse.de> CC: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 8月, 2009 1 次提交
-
-
由 Trond Myklebust 提交于
We can't call nfs_readdata_release()/nfs_writedata_release() without first initialising and referencing args.context. Doing so inside nfs_direct_read_schedule_segment()/nfs_direct_write_schedule_segment() causes an Oops. We should rather be calling nfs_readdata_free()/nfs_writedata_free() in those cases. Looking at the O_DIRECT code, the "struct nfs_direct_req" is already referencing the nfs_open_context for us. Since the readdata and writedata structures carry a reference to that, we can simplify things by getting rid of the extra nfs_open_context references, so that we can replace all instances of nfs_readdata_release()/nfs_writedata_release(). Reported-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Tested-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 6月, 2009 3 次提交
-
-
由 Andy Adamson 提交于
Separate commit calls from nfs41: sequence setup/done support Implement the commit rpc_call_prepare method for asynchronuos nfs rpcs, call nfs41_setup_sequence from respective rpc_call_validate_args methods. Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [pnfs: client data server write validate and release] Signed-off-by: Andy Adamson<andros@umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [nfs41: Support sessions with O_DIRECT.] Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [nfs41: separate free slot from sequence done] [nfs41: nfs4_sequence_free_slot use nfs_client for data server] Signed-off-by: Andy Adamson<andros@umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Separate write calls from nfs41: sequence setup/done support Implement the write rpc_call_prepare method for asynchronuos nfs rpcs, call nfs41_setup_sequence from respective rpc_call_validate_args methods. Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [pnfs: client data server write validate and release] Signed-off-by: NAndy Adamson <andros@umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [move the nfs4_sequence_free_slot call in nfs_readpage_retry from] [nfs41: separate free slot from sequence done Signed-off-by: NAndy Adamson <andros@umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [nfs41: Support sessions with O_DIRECT.] Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [nfs41: nfs4_sequence_free_slot use nfs_client for data server] Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Implement the read rpc_call_prepare method for asynchronuos nfs rpcs, call nfs41_setup_sequence from respective rpc_call_validate_args methods. Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [pnfs: client data server write validate and release] Signed-off-by: NAndy Adamson <andros@umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [move the nfs4_sequence_free_slot call in nfs_readpage_retry from] [nfs41: separate free slot from sequence done] [remove nfs_readargs.nfs_server, use calldata->inode instead] Signed-off-by: NAndy Adamson <andros@umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [nfs41: Support sessions with O_DIRECT] Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [nfs41: nfs4_sequence_free_slot use nfs_client for data server] Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 7月, 2008 1 次提交
-
-
由 Chuck Lever 提交于
Clean up: some fops use NFSDBG_FILE, some use NFSDBG_VFS. Let's use NFSDBG_FILE for all fops, and consistently report file names instead of inode numbers. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 4月, 2008 3 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
In the case of readpage() we need to ensure that the pages get unlocked, and that the error is flagged. In the case of O_DIRECT, we need to ensure that the pages are all released. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 2月, 2008 2 次提交
-
-
由 Trond Myklebust 提交于
We want to ensure that rpc_call_ops that involve mntput() are run on nfsiod rather than on rpciod, so that they don't deadlock when the resulting umount calls rpc_shutdown_client(). Hence we specify that read, write and commit calls must complete on nfsiod. Ditto for NFSv4 open, lock, locku and close asynchronous calls. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We can't allow rpc callback functions like task->tk_ops->rpc_call_prepare() and task->tk_ops->rpc_call_done() to call mntput() in any way, since that will cause a deadlock when the call to rpc_shutdown_client() attempts to wait on 'task' to complete. We can avoid the above deadlock by moving calls to mntput to task->tk_ops->rpc_release() callback, since at that time the task will be marked as completed, and so rpc_shutdown_client won't attempt to wait on it. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 1月, 2008 5 次提交
-
-
由 Trond Myklebust 提交于
There are no interruptible waits for asynchronous RPC tasks, so we don't need to wrap calls to rpc_run_task() with an rpc_clnt_sigmask/rpc_clnt_unsigmask pair. Instead we can wrap the wait_for_completion_interruptible() in nfs_direct_wait(). This means that we completely optimise away sigmask setting for the case of non-blocking aio/dio. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Move the common code for setting up the nfs_write_data and nfs_read_data structures into fs/nfs/read.c, fs/nfs/write.c and fs/nfs/direct.c. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want the default scheduling priority (priority == 0) to remain RPC_PRIORITY_NORMAL. Also ensure that the priority wait queue scheduling is per process id instead of sometimes being per thread, and sometimes being per inode. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 12月, 2007 1 次提交
-
-
由 Trond Myklebust 提交于
This reverts commit b9148c6b. On Wed, 12 Dec 2007 10:57:30 -0500, Chuck Lever wrote > commit b9148c6b should be reverted. It was recently forward-ported > from some years-old patches, and is clearly not needed now. > > On Dec 11, 2007, at 5:21 PM, Adrian Bunk wrote: > >> This code became dead after commit >> b9148c6b >> (which BTW doesn't seem to have changed any behaviour) and can >> therefore >> be removed. >> >> Spotted by the Coverity checker. >> >> Signed-off-by: Adrian Bunk <bunk@kernel.org> >> >> --- >> --- linux-2.6/fs/nfs/direct.c.old 2007-12-02 21:54:53.000000000 +0100 >> +++ linux-2.6/fs/nfs/direct.c 2007-12-02 21:55:10.000000000 +0100 >> @@ -897,15 +897,12 @@ ssize_t nfs_file_direct_write(struct kio >> if (!count) >> goto out; /* return 0 */ >> >> retval = -EINVAL; >> if ((ssize_t) count < 0) >> goto out; >> - retval = 0; >> - if (!count) >> - goto out; >> >> retval = nfs_sync_mapping(mapping); >> if (retval) >> goto out; >> >> retval = nfs_direct_write(iocb, iov, nr_segs, pos, count); >> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 12月, 2007 1 次提交
-
-
由 Matthew Wilcox 提交于
By using the TASK_KILLABLE infrastructure, we can get rid of the 'intr' mount option. We have to use _killable everywhere instead of _interruptible as we get rid of rpc_clnt_sigmask/sigunmask. Signed-off-by: NLiam R. Howlett <howlett@gmail.com> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-