That consolidates the error messages in 'record', 'stat' and 'top', that
now get a consistent set of messages and allow other tools to use the
new method to report problems using whatever UI toolkit.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1cudb7wl996kz7ilz83ctvhr@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The only fallback right now is for HW cpu-cycles -> SW cpu-clock, that
was done in the same way in both 'top' and 'record'.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-58l1mgibh9oa9m0pd3fasxa5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of doing it in stat, top, record or any other tool that opens
event descriptors.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vr8hzph83d5t2mdlkf565h84@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now we'll see the command being run and if it fails, the fields that had
unexpected values and the expected values, example testing a problem in the
next patch:

  # perf test -v 13
  13: struct perf_event_attr setup                           :
  --- start ---
  SNIP
    running 'PERF_TEST_ATTR=/tmp/tmpDNIE6M /home/acme/bin/perf record -o /tmp/tmpDNIE6M/perf.data --group -e cycles,instructions kill >/dev/null 2>&1' ret 0
    running 'PERF_TEST_ATTR=/tmp/tmpV5lKro /home/acme/bin/perf stat -o /tmp/tmpV5lKro/perf.data -dd kill >/dev/null 2>&1' ret 1
  expected config=3, got 65540
  expected exclude_guest=1, got 0
  FAILED '/home/acme/libexec/perf-core/tests/attr/test-stat-detailed-2' - match failure
  ---- end ----
  struct perf_event_attr setup: FAILED!
  #

While in the past we would see at the '-v' level many more messages for the
fields that matched, something we may want to see only in the '-vv' log level.

Keeping the 'running' messages so that we can see the tools tests that
succeeded so that we can compare it to the one that failed, helping pinpointing
the command line switch combo that leads to the problem.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9avmwxv5ipxyafwqxbk52ylg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of > /tmp/krava, direct it to /dev/null.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oo4yhij2327u8ircz4d0y5p4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As they are used from diff and event group report, add a test case to
verify their behaviors.

In this test I made a fake machine and two evsel.  Each evsel got 10
samples (so hist entries) - 5 are common and the rests are not.  So
after hists__match() both of them will have 5 entries with pair set.

And the second evsel has a collapsed entry so that the total number is 9
- I made it in order to simulate more realistic case.  Thus after
hists__link the first entry will have 14 entries - 5 are common (w/
pair), 5 are unmatch (w/o pair) and 4 are dummy (w/ pair).  And the
second entry will have 9 entries all have its pair.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355128197-18193-5-git-send-email-namhyung@kernel.org
[ committer note: fixed up clashes with cset that moved methods to machine.h ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's no reason to run hists_compute_resort() using output tree.
Convert it to use internal tree so that it can remove unnecessary
_output_resort.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355128197-18193-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For matching and/or linking hist entries, they need to be sorted by
given sort keys.  However current hists__match/link did this on the
output trees, so that the entries in the output tree need to be resort
before doing it.

This looks not so good since we have trees for collecting or collapsing
entries before passing them to an output tree and they're already sorted
by the given sort keys.  Since we don't need to print anything at the
time of matching/linking, we can use these internal trees directly
instead of bothering with double resort on the output tree.

Its only user - at the time of this writing - perf diff can be easily
converted to use the internal tree and can save some lines too by
getting rid of unnecessary resorting codes.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355128197-18193-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When comparing entries for collapsing put the given entry first, and
then the iterated entry.  This is not the case of hist_entry__cmp() when
called if given sort keys don't require collapsing.  So change the order
for the sake of consistency.  It will be required for matching and/or
linking multiple hist entries.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1355128197-18193-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

By popular demand, arch/aarch64 is now known as arch/arm64. However,
uname -m (and indeed the GNU triplet) still use aarch64 as the machine
string.

This patch fixes native builds of both the kernel and perf tools by
updating the relevant Makefiles to munge the output of uname -m and
set the ARCH variable appropriately.

Cc: <stable@vger.kernel.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Thanks (mostly) to uapi the package created from perf-*-src-pkg FTBFS:

|    CC perf.o
|In file included from util/../perf.h:8:0,
|                 from util/cache.h:7,
|                 from perf.c:12:
|arch/x86/include/asm/unistd.h:4:29: fatal error: uapi/asm/unistd.h: No such file or directory
|
|    CC perf.o
|In file included from util/../perf.h:106:0,
|                 from util/cache.h:7,
|                 from perf.c:12:
|include/linux/perf_event.h:17:35: fatal error: uapi/linux/perf_event.h: No such file or directory
|
|    CC perf.o
|In file included from include/uapi/linux/perf_event.h:19:0,
|                 from util/../perf.h:106,
|                 from util/cache.h:7,
|                 from perf.c:12:
|util/include/asm/byteorder.h:2:49: fatal error: ../../../../include/uapi/linux/swab.h: No such file or directory
|
|    CC perf.o
|In file included from util/include/../../../../include/linux/list.h:7:0,
|                 from util/include/linux/list.h:4,
|                 from util/parse-events.h:7,
|                 from perf.c:15:
|util/include/linux/const.h:1:50: fatal error: ../../../../include/uapi/linux/const.h: No such file or directory
|
|In file included from builtin-kvm.c:26:0:
|arch/x86/include/asm/svm.h:4:26: fatal error: uapi/asm/svm.h: No such file or directory
|
|In file included from util/evsel.c:21:0:
|include/linux/hw_breakpoint.h:5:38: fatal error: uapi/linux/hw_breakpoint.h: No such file or directory
|
|    CC util/evsel.o
|In file included from util/perf_regs.h:5:0,
|                 from util/evsel.c:23:
|arch/x86/include/perf_regs.h:6:27: fatal error: asm/perf_regs.h: No such file or directory
|
|   CC util/rbtree.o
|In file included from ../../lib/rbtree.c:24:0:
|util/include/linux/rbtree_augmented.h:2:56: fatal error: ../../../../include/linux/rbtree_augmented.h: No such file or directory

This patch adds the missing files.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1357654134-28538-1-git-send-email-bigeasy@linutronix.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This test can be used to check wheither kernel supports IPC message queue
copy and restore features (required by CRIU project).
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We simplified virtqueue_add_buf(), make it clear in the callers.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

I was curious why sys_kcmp wasn't working, which led me to the testcase.
It turned out I hadn't enabled CHECKPOINT_RESTORE in the kernel I was
testing.  Add a decoding of errno to the testcase to make that obvious.
Signed-off-by: NDave Jones <davej@redhat.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In case breakpoint test exit non zero value it will cause make error.
Better way is just print the test failure status.
Signed-off-by: NDave Young <dyoung@redhat.com>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In case kcmp_test exit non zero value it will cause make error.
Better way is just print the test failure status.
Signed-off-by: NDave Young <dyoung@redhat.com>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

make run_tests need the target is run_tests instead of run-tests
Also gcc output should be kcmp_test. Fix these two issues.
Signed-off-by: NDave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Original behavior:
  bash-4.1$ make -C memory-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
  ./on-off-test.sh
  make: execvp: ./on-off-test.sh: Permission denied
  make: *** [run_tests] Error 127
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'

After applying the patch:
  bash-4.1$ make -C memory-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
  /bin/sh: ./on-off-test.sh: Permission denied
  memory-hotplug selftests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
Signed-off-by: NDave Young <dyoung@redhat.com>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Original behavior:
  bash-4.1$ make -C cpu-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
  ./on-off-test.sh
  make: execvp: ./on-off-test.sh: Permission denied
  make: *** [run_tests] Error 127
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'

After applying the patch:
  bash-4.1$ make -C cpu-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
  /bin/sh: ./on-off-test.sh: Permission denied
  cpu-hotplug selftests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
Signed-off-by: NDave Young <dyoung@redhat.com>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Original behavior:
  bash-4.1$ make -C mqueue run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
  ./mq_open_tests /test1
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  make: *** [run_tests] Error 1
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'

After applying the patch:
  bash-4.1$ make -C mqueue run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  mq_open_tests: [FAIL]
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  mq_perf_tests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
Signed-off-by: NDave Young <dyoung@redhat.com>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Original behavior:
  bash-4.1$ make -C vm run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
  /bin/sh ./run_vmtests
  ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
  Please run this test as root
  make: *** [run_tests] Error 1
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'

After applying the patch:
  bash-4.1$ make -C vm run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
  ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
  Please run this test as root
  vmtests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
Signed-off-by: NDave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sometimes a test kernel will crash or hang on reboot (this is even more
apparent when testing a config without CGROUPS on a box running
systemd). When this happens, on the next iteration of installing a
kernel, ktest will fail when it tries to install.

Have ktest do a check to see if the target can be connected to via ssh
before it tries to install. If it can't connect, then reboot again.
This time the reboot will fail because it can't connect and will force a
power cycle.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit fb16d891 "kconfig: replace 'oldnoconfig' with 'olddefconfig', and
keep the old name", changed ktest's default config update from
oldnoconfig to olddefconfig without adding oldnoconfig as a backup.
The make oldnoconfig works much better than its backup of:
   yes '' | make oldconfig

But due to this change, and the fact that ktest is used to build lots of
older kernels (and for bisects), it forgoes the oldnoconfig completely.

Cc: Adam Lee <adam8157@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Also remove -Wextra because gcc-4.6 emits lots of irritating
signed/unsigned comparison warnings.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I installed Fedora 17 which no longer supports grub v1. I worked
with grub2 for a while, but there's so many issues with it and automated
rebooting, that I decided to switch to syslinux. Instead of using
the REBOOT_SCRIPT and add customized changes to get syslinux booted,
I thought it better to make ktest aware of syslinux and add options
to simplify the use of syslinux on a target test box.
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Using struct perf_record_opts to specify how to configure the evsel
perf_event_attrs.

This gets top closer to record in the way it sets up evsels, with the
aim of sharing more and more to the point that both will be a single
utility.

In this direction top now uses the same callchain option parsing as
record and that brings DWARF callchains to top, something that was
already available for record.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u03o0bsrqcjgskciso3pvsjr@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used by perf top, that will first setup the symbol system to
deal with callchains and then call these routines to ask the kernel
for callchains.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jg0dh8rmlx7x11e7u7mnasvd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Its all it uses and makes the parsing callback suitable for use by
'perf top', which will happen in a followup patch.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wb9eti78bk2jd7wpasro8hsz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before those fields showed just a number, now it decodes each bit:

[root@sandy linux]# perf evlist -v
cycles: sample_freq=4000, size: 96, sample_type: IP|TID|TIME|CPU|PERIOD, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING|ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, sample_id_all: 1, exclude_guest: 1

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-64ezdtiijolgti08ae3phxyj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Its too annoying to go over the Documentation install target while
developing the tools.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cfzcxj8sp727h0sgfcvvwva1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we can print all the details when debugging other tools,
when we have just evlists and evsels, not a perf.data file.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mktq5fy2h5z7jyeqvvf5mbc8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since we need to ensure the leader is set before configuring the
evsel perf_event_attrs.

Reducing the boilerplate needed by tools, helping, for instance,
'perf trace', that wasn't setting the leader.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-22shm0ptkch2kgl7rtqlligx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is needed, so far, just in 'perf stat', to scale counters, so don't
unconditionally ask for them in the perf_evsel__config() method.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ujpujgscq2f2oodxuso5nobc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead make perf_evlist__confir_attrs use perf_evsel__set_sample_id()
when having more than one event, that way only if we have multiple
events we'll ask to have the event ids returned when we read its file
descriptors.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xuho5hrrxy2ky0cjpr80hyfp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before rebooting the target, run the sync command, as it seems that
either Grub2 or systemd gets screwed up if you update to reboot a kernel
once and do a reboot without doing a sync.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When mmaping multiple events we need to find the right evsel that
matches an event in the ring buffer.

For that we need to set the PERF_FORMAT_ID bit in
perf_event_attr.read_format so that when we read the event fds we get
that id to then hash it and be able later to use perf_evlist__id2evsel
to find the right evsel.

We also need to set the PERF_SAMPLE_ID bit in
perf_event_attr.sample_type to ask for that id to be stashed in each
sample, so that we can demux it.

So add a perf_evsel__set_sample_id() method to do those two things in
one operation.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1z4xcmbud30lamklfe80oopu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Removing one trace_event__id function, not used anymore.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-13p2ov2rg166y73j9uazukma@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In two cases this test could detect an error, bail out but return zero.
Fix it by reporting -1 for failure.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tjhs9v6nqpofmxv3gs5lnu2c@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We use evsel->sample_size to detect underflows in
perf_evsel__parse_sample, but we were failing to update it after
perf_evsel__init(), i.e. when we decide, after creating an evsel, that
we want some extra field bit set.

Fix it by introducing methods to set a bit that will take care of
correctly adjusting evsel->sample_size.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ny5pzsing0dcth7hws48x9c@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Mechanical, no functional changes.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9ib6qtqge1jmms2luwu4udbx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>