The name field in the nvram_header can be < 12 chars, null-terminated,
or 12 chars without the null.  Handle this safely.
Signed-off-by: NJim Keniston <jkenisto@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Simplify creation and use of the NVRAM partition list.
Signed-off-by: NJim Keniston <jkenisto@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I'm not aware of any userspace tool accessing it by its name anyways,
it's read back by the kernel itself on the next boot to get back
older log entries
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The nvram log partition stuff currently in nvram_64.c is really
pseries specific. It isn't actually used on anything else (despite
the fact that we ran the code to setup the partition on anything
except powermac) and the log format is specific to pseries RTAS
implementation. So move it where it belongs
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This changes the function to use nvram_find_partition() instead
of doing the lookup "by hand". It also makes some of the logic
clearer and prints out more useful diagnostic information.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Existing code is nasty, has bugs etc... rewrite the function
more simply, and make it take the signature and optional
name of the partitions to remove as arguments, thus making
it a more generic utility.

We also try to remove a log partition that we find and is too
small rather than creating a duplicate.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This error log stuff is really pseries specific. As a first step we move
the initialization of these variables to the caller of
nvram_create_partition(), which is also slightly reorganized so we
setup the free partition before we clear the new partition, so the
chance of an error during clear leaving us with invalid headers
is lessened.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When creating a partition, we clear it entirely rather than
just the first two words since the previous code was rather
specific to the pseries log partition format.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use BUILD_BUG_ON to ensure the structure representing a partition
header have the right size.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This converts nvram_create_partition() to use a size in bytes
rather than blocks. It does the appropriate alignment internally

The size passed is also the data size (ie. doesn't include the
header anymore).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Replace nvram_create_os_partition() with a variant that takes
the partition name, signature and size as arguments.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This moves a bunch of definitions out of asm/nvram.h to the files
that use them or just outright remove completely unused stuff.

We leave the partition signatures definitions, they will be useful
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

PowerPC relies on IRQ-disable to guard against RCU quiecent states,
use the appropriate RCU call version.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

- Add Clock Power Management (CPM) node to dts tree
- Add idle-doze entry in CPM node
- Add standby entry in CPM node
- Add PM and SUSPEND support by default in defconfig
- Remove UART2 and UART3 as they are unused, this will
  allow CPM to put unused-units (UART2 and UART3) to sleep.
Signed-off-by: NVictor Gallardo <vgallardo@apm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

- Add Clock Power Management (CPM) node to dts tree
- Add idle-doze entry in CPM node
- Add standby entry in CPM node
- Add PM and SUSPEND support by default in defconfig
- Add NO_HZ and CONFIG_HIGH_RES_TIMERS support by
  default in defconfig
Signed-off-by: NVictor Gallardo <vgallardo@apm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Add suspend/resume support for 4xx compatible CPUs.
See /sys/power/state for available power states configured in.

Add two different idle states (idle-wait and idle-doze) controlled via sysfs.
Default is idle-wait.
	cat /sys/devices/system/cpu/cpu0/idle
	[wait] doze

To save additional power, use idle-doze.
	echo doze > /sys/devices/system/cpu/cpu0/idle
	cat /sys/devices/system/cpu/cpu0/idle
	wait [doze]
Signed-off-by: NVictor Gallardo <vgallardo@apm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Since STACK_FRAME_OVERHEAD is defined in asm/ptrace.h and that
is ASSEMBER safe, we can just include that instead of going via
asm-offsets.h.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Change pgdir from a void to real type.  Having this as a void is
stupid and has already caused 1 bug.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds the POWER7+ cputable entry for the PVR 0x004a0000.  Rest is
the same as vanilla POWER7.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These are not needed on POWER7 so remove them.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These are not needed so just remove them
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This simple patch adds the firmware feature for VPHN to the firmware
features bitmask.
Signed-off-by: NJesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No need to have three of them.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On Tue, 2 Nov 2010, Michael Ellerman wrote:

> On Mon, 2010-11-01 at 22:20 +0100, Jesper Juhl wrote:
> > Hi Stephen,
> >
> > On Tue, 2 Nov 2010, Stephen Rothwell wrote:
> >
> > > On Mon, 1 Nov 2010 21:06:23 +0100 (CET) Jesper Juhl <jj@chaosbits.net> wrote:
> > > >
> > > > Remove unused function 'mf_getSrcHistory' (that will never be used ever
> > > > according to Stephen Rothwell).
> > > >
> > > > Signed-off-by: Jesper Juhl <jj@chaosbits.net>
> > >
> > > Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
> > >
> >
> > Ok, so if you are the (unofficial) iSeries maintainer and you don't merge
> > the patch somewhere that'll eventually go up-stream, but just ACK it
> > (thank you for that btw), then where do I send it to get it merged?
>
> Here. ie. linuxppc-dev.
>
> But, while you're removing it you should remove the #if 0'ed callsite as
> well, see mf_src_proc_show() in that file. :)
>
Done. See patch below.

Remove unused function 'mf_getSrcHistory' (that will never be used
ever according to Stephen Rothwell) and also remove most of (under 'if
0') code from mf_src_proc_show() where the function was called.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Hi,

We can get rid of a memset in
arch/powerpc/platforms/cell/spufs/lscsa_alloc.c::spu_alloc_lscsa_std() by
using vzalloc() rather than vmalloc()+memset().

Completely untested patch below since I have no hardware nor tools to
compile this.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add a function to get the maximum address that can be hotplug added.
This is needed to calculate the size of the tce table needed to cover
all memory in 1:1 mode.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Also add a comment to dev_archdata, indicating that changes there need
to be verified against the driver code.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No need to initialize per-cpu pointer to NULL, it is the default.

Direct dma ops and no setup are the defaults, no need to set for
iommu-off.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Reviewed-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No need to set the device tree device_node pci node iommu pointer, its
only used for dlpar remove.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

direct_dma_ops is the default pci dma ops.

No need to call a function to get the pci dma ops, we know they are the
dma_direct_ops.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No need for empty helpers with iommu off, the ppc_md hooks are optional.

The direct_dma_ops are the default pci_dma_ops, so no need to set in the
them iommu off case.

No need to set the device tree device_node pci node iommu pointer, its
only used for dlpar remove.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use the set_dma_ops helper. Instead of modifying vio_dma_mapping_ops,
just create a trivial wrapper for dma_supported.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Changed <module>-objs to <module>-y in Makefile.
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The following warning is seen while compilation of PowerPC kernel:

 CC      drivers/rtc/rtc-cmos.o
drivers/rtc/rtc-cmos.c:697:2: warning: #warning Assuming 128 bytes
of RTC+NVRAM address space, not 64 bytes.

Fix it by adding defined(__powerpc__).
Signed-off-by: NSrikanth Krishnakar <skrishna@mvista.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Create sysfs interface to export data from H_BEST_ENERGY hcall
that can be used by administrative tools on supported pseries
platforms for energy management	optimizations.

sys/device/system/cpu/pseries_(de)activate_hint_list and
sys/device/system/cpu/cpuN/pseries_(de)activate_hint will provide
hints for activation and deactivation of cpus respectively.

These hints are abstract number given by the hypervisor based
on the extended knowledge the hypervisor has regarding the
system topology and resource mappings.

The activate and the deactivate sysfs entry is for the two
distinct operations that we could do for energy savings.  When
we have more capacity than required, we could deactivate few
core to save energy.  The choice of the core to deactivate
will be based on /sys/devices/system/cpu/deactivate_hint_list.
The comma separated list of cpus (cores) will be the preferred
choice.  If we have to activate some of the deactivated cores,
then /sys/devices/system/cpu/activate_hint_list will be used.

The per-cpu file
/sys/device/system/cpu/cpuN/pseries_(de)activate_hint further
provide more fine grain information by exporting the value of
the hint itself.

Added new driver module
	arch/powerpc/platforms/pseries/pseries_energy.c
under new config option CONFIG_PSERIES_ENERGY
Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These APIs take logical cpu number as input
Change cpu_first_thread_in_core() to cpu_first_thread_sibling()
Change cpu_last_thread_in_core() to cpu_last_thread_sibling()

These APIs convert core number (index) to logical cpu/thread numbers
Add cpu_first_thread_of_core(int core)
Changed cpu_thread_to_core() to cpu_core_index_of_thread(int cpu)

The goal is to make 'threads_per_core' accessible to the
pseries_energy module.  Instead of making an API to read
threads_per_core, this is a higher level wrapper function to
convert from logical cpu number to core number.

The current APIs cpu_first_thread_in_core() and
cpu_last_thread_in_core() returns logical CPU number while
cpu_thread_to_core() returns core number or index which is
not a logical CPU number.  The new APIs are now clearly named to
distinguish 'core number' versus first and last 'logical cpu
number' in that core.

The new APIs cpu_{first,last}_thread_sibling() work on
logical cpu numbers.  While cpu_first_thread_of_core() and
cpu_core_index_of_thread() work on core index.

Example usage:  (4 threads per core system)

cpu_first_thread_sibling(5) = 4
cpu_last_thread_sibling(5) = 7
cpu_core_index_of_thread(5) = 1
cpu_first_thread_of_core(1) = 4

cpu_core_index_of_thread() is used in cpu_to_drc_index() in the
module and cpu_first_thread_of_core() is used in
drc_index_to_cpu() in the module.

Make API changes to few callers.  Export symbols for use in modules.
Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>