- 06 9月, 2008 1 次提交
-
-
由 Peter Zijlstra 提交于
If HLT stops the TSC, we'll fail to account idle time, thereby inflating the actual process times. Fix this by re-calibrating the clock against GTOD when leaving nohz mode. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 05 9月, 2008 1 次提交
-
-
由 Al Viro 提交于
We should've set refcount on the root sysctl table; otherwise we'll blow up the first time we get down to zero dynamically registered sysctl tables. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Tested-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 9月, 2008 20 次提交
-
-
由 Linus Torvalds 提交于
Commit 88452565 ("PCI: clean up resource alignment management") changed the resource handling to mark how a resource was aligned on a per-resource basis. Thus, instead of looking at the resource number to determine whether it was a bridge resource or a regular resource (they have different alignment rules), we should just ask the resource for its alignment directly. The reason this broke only cardbus resources was that for the other types of resources, the old way of deciding alignment actually still happened to work. But CardBus bridge resources had been changed by commit 934b7024 ("Fix cardbus resource allocation") to look more like regular resources than PCI bridge resources from an alignment handling standpoint. Reported-and-tested-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alok N Kataria 提交于
When calibration against PIT fails, the warning that we print is misleading. In a virtualized environment the VM may get descheduled while calibration or, the check in PIT calibration may fail due to other virtualization overheads. The warning message explicitly assumes that calibration failed due to SMI's which may not be the case. Change that to something proper. Signed-off-by: NAlok N Kataria <akataria@vmware.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Anonymous mappings should ignore offset but shared anonymous mapping forgot to clear it and makes the following legit test program trigger SIGBUS. #include <sys/mman.h> #include <stdio.h> #include <errno.h> #define PAGE_SIZE 4096 int main(void) { char *p; int i; p = mmap(NULL, 2 * PAGE_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_ANONYMOUS, -1, PAGE_SIZE); if (p == MAP_FAILED) { perror("mmap"); return 1; } for (i = 0; i < 2; i++) { printf("page %d\n", i); p[i * 4096] = i; } return 0; } Fix it. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NHugh Dickins <hugh@veritas.com> Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: SELinux: memory leak in security_context_to_sid_core
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Fix for getting CPU number in power_save_ppc32_restore() powerpc: Fix build error with 64K pages and !hugetlbfs powerpc: Work around gcc's -fno-omit-frame-pointer bug powerpc: Make sure _etext is after all kernel text powerpc: Only make kernel text pages of linear mapping executable powerpc: Fix uninitialised variable in VSX alignment code
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2x: Accessing un-mapped page ath9k: Fix TX control flag use for no ACK and RTS/CTS ath9k: Fix TX status reporting iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_remove iwlwifi: call apm stop on exit iwlwifi: fix Tx cmd memory allocation failure handling iwlwifi: fix rx_chain computation iwlwifi: fix station mimo power save values iwlwifi: remove false rxon if rx chain changes iwlwifi: fix hidden ssid discovery in passive channels iwlwifi: W/A for the TSF correction in IBSS netxen: Remove workaround for chipset quirk pcnet-cs, axnet_cs: add new IDs, remove dup ID with less info ixgbe: initialize interrupt throttle rate net/usb/pegasus: avoid hundreds of diagnostics tipc: Don't use structure names which easily globally conflict.
-
由 Eric Paris 提交于
Fix a bug and a philosophical decision about who handles errors. security_context_to_sid_core() was leaking a context in the common case. This was causing problems on fedora systems which recently have started making extensive use of this function. In discussion it was decided that if string_to_context_struct() had an error it was its own responsibility to clean up any mess it created along the way. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David S. Miller 提交于
-
由 Eilon Greenstein 提交于
The allocated RX buffer size was 64 bytes bigger than the PCI mapped size with no good reason. If the packet was actually using the buffer up to its limit and if the last 64 bytes of the buffer crossed 4KB boundary then an unmapped PCI page was accessed. The fix is to use only one parameter for the buffer size - there is no need to differentiate between the buffer size and the PCI mapping size since the extra 64 bytes can actually be used by the FW to align the Ethernet payload to 64 bytes. Also updating the driver version and date Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jouni Malinen 提交于
Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gregory Greenman 提交于
This patch sets STATUS_EXIT_PENDING on pci_remove. Otherwise iwl4965_down may fail to uninitialize the driver. Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gregory Greenman 提交于
This patch calls apm stop on exit and suspend. Without this patch hardware consumes power even after driver is removed or suspended. Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch "iwlwifi: do not use GFP_DMA in iwl_tx_queue_init" removes GFP_DMA from allocation tx command buffers. GFP_DMA allows allocation only for memory under 16M which causes allocation problems suspend/resume flows. Using kmalloc is temporal solution and some consistent/coherent allocation schema will be more correct. Since iwlwifi hardware supports 64bit address this solution should work on x86 (32 and 64bit) for now. This patch fixes memory freeing problem in the previous patch. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NIan Schram <ischram@telenet.be> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch fixes rx_chain computation. The code that adjusts number of rx chains to number supported by HW was missing. Miss configuration causes firmware error. Note: iwlwifi supports HW with up to 3 RX chains (2x2, 2x3, 1x2, and 3x3 MIMO). This patch also simplifies the whole RX chain computation. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch fixes the wrong use MIMO power save values. Our TX was configured with our MIMO power save values instead of peer's MIMO power save values, this may affect connectivity. The peer STA/AP may not sense our traffic at all as it doesn't have all RX chains opened. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
Rx chain might change during power save transitions but it doesn't require sending Full-ROXN command to the firmware. Full-RXON requires reconnection to an AP and thus affects user experience. The patch avoids the Full-RXON by removing the rx_chain modification check in iwl_full_rxon_required function. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This enables sending of direct probes on passive channels, as long as traffic was detected on that channel. This enables connectivity to hidden/non broadcasting SSIDs APs on passive channels. Note 5000 HW declares all 5.2 spectrum as passive. Signed-off-by: NCahill Ben <ben.m.cahill@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Assaf Krauss 提交于
This patch is a W/A for the TSF sync issue in IBSS merging. HW is not capable to sync TSF (it's constantly little behind). This creates constant IBSS merging upon reception of each beacon, adding and removing station which in turn creates above 50% packet loss and thus dramatically degrade the throughput. The W/A simply stops the driver from declaring it has a reliable TSF value and thus eliminates IBSS merging. Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 9月, 2008 18 次提交
-
-
由 Linus Torvalds 提交于
The TSC calibration function is still very complicated, but this makes it at least a little bit less so by moving the PIT part out into a helper function of its own. Tested-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-of-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dhananjay Phadke 提交于
Remove chipset-specific quirk workaround; the workaround caused unrecoverable DMA lockups when the driver was loaded following a PXE boot. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NMichael Brown <mbrown@fensystems.co.uk> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Komuro 提交于
pcnet_cs: add new ID: "corega Ether PCC-TD". remove duplicate ID: "IC-CARD". axnet_cs: add new ID: "IO DATA ETXPCM". Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Andy Gospodarek 提交于
This commit dropped the setting of the default interrupt throttle rate. commit 021230d4 Author: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Date: Mon Mar 3 15:03:45 2008 -0800 ixgbe: Introduce MSI-X queue vector code The following patch adds it back. Without this the default value of 0 causes the performance of this card to be awful. Restoring these to the default values yields much better performance. This regression has been around since 2.6.25. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> CC: stable@kernel.org [2.6.25 and later] Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 David Brownell 提交于
Make the "pegasus" driver scream less loudly in the face of problems as it initializes, avoiding hundreds of messages: - ratelimit some key error messages - avoid some spurious diagnostics caused by strange codeflow And fix one instance of goofy indentation. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Kumar Gala 提交于
The calculation to get TI_CPU based off of SPRG3 was just plain wrong, meaning that we were getting garbage for the CPU number on 6xx/G3/G4 based SMP boxes in this code. Just offset off the stack pointer (to get to thread_info) like all the other references to TI_CPU do. This was pointed out by Chen Gong <G.Chen@freescale.com> [paulus@samba.org - use rlwinm r12,r11,... instead of rlwinm r12,r1,...; tophys()] Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
HAVE_ARCH_UNMAPPED_AREA and HAVE_ARCH_UNMAPPED_AREA_TOPDOWN must be defined whenever CONFIG_PPC_MM_SLICES is enabled, not just when CONFIG_HUGETLB_PAGE is. They used to be always defined together but this is no longer the case since 3a8247cc ("powerpc: Only demote individual slices rather than whole process"). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Tony Breeds 提交于
This bug is causing random crashes (http://bugzilla.kernel.org/show_bug.cgi?id=11414). -fno-omit-frame-pointer is only needed on powerpc when -pg is also supplied, and there is a gcc bug that causes incorrect code generation on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack locations below the stack pointer, which is not allowed by the ABI because those locations can and sometimes do get corrupted by an interrupt. This ensures that CONFIG_FRAME_POINTER is only selected by ftrace. When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work around the gcc codegen bug. Patch based on work by: Andreas Schwab <schwab@suse.de> Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This makes core_kernel_text() (and therefore kernel_text_address()) return the correct result. Currently all the __devinit routines (at least) will not be considered to be kernel text. This is just a quick fix for 2.6.27 - hopefully we will be able to fix this better in 2.6.28. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Commit bc033b63 ("powerpc/mm: Fix attribute confusion with htab_bolt_mapping()") moved the check for whether we should make pages of the linear mapping executable from htab_bolt_mapping into its callers, including htab_initialize. A side-effect of this is that the decision is now made once for each contiguous section in the LMB array rather than for each page individually. This can often mean that the whole of the linear mapping ends up being executable. This reverts to the previous behaviour, where individual pages are checked for being part of the kernel text or not, by moving the check back down into htab_bolt_mapping. Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Neuling 提交于
This fixes an uninitialised variable in the VSX alignment code. It can cause warnings from GCC (noticed with gcc-4.1.1). Gcc is actually correct in this instance, and this bug could cause the alignment interrupt handler to send a SIGSEGV to the process on a legitimate access. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David S. Miller 提交于
Andrew Morton reported a build failure on sparc32, because TIPC uses names like "struct node" and there is a like named data structure defined in linux/node.h This just regexp replaces "struct node*" to "struct tipc_node*" to avoid this and any future similar problems. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipsec: Fix deadlock in xfrm_state management. ipv: Re-enable IP when MTU > 68 net/xfrm: Use an IS_ERR test rather than a NULL test ath9: Fix ath_rx_flush_tid() for IRQs disabled kernel warning message. ath9k: Incorrect key used when group and pairwise ciphers are different. rt2x00: Compiler warning unmasked by fix of BUILD_BUG_ON mac80211: Fix debugfs union misuse and pointer corruption wireless/libertas/if_cs.c: fix memory leaks orinoco: Multicast to the specified addresses iwlwifi: fix 64bit platform firmware loading iwlwifi: fix apm_stop (wrong bit polarity for FLAG_INIT_DONE) iwlwifi: workaround interrupt handling no some platforms iwlwifi: do not use GFP_DMA in iwl_tx_queue_init net/wireless/Kconfig: clarify the description for CONFIG_WIRELESS_EXT_SYSFS net: Unbreak userspace usage of linux/mroute.h pkt_sched: Fix locking of qdisc_root with qdisc_root_sleeping_lock() ipv6: When we droped a packet, we should return NET_RX_DROP instead of 0
-
由 Thomas Gleixner 提交于
Larry Finger reported at http://lkml.org/lkml/2008/9/1/90: An ancient laptop of mine started throwing errors from b43legacy when I started using 2.6.27 on it. This has been bisected to commit bfc0f594 "x86: merge tsc calibration". The unification of the TSC code adopted mostly the 64bit code, which prefers PMTIMER/HPET over the PIT calibration. Larrys system has an AMD K6 CPU. Such systems are known to have PMTIMER incarnations which run at double speed. This results in a miscalibration of the TSC by factor 0.5. So the resulting calibrated CPU/TSC speed is half of the real CPU speed, which means that the TSC based delay loop will run half the time it should run. That might explain why the b43legacy driver went berserk. On the other hand we know about systems, where the PIT based calibration results in random crap due to heavy SMI/SMM disturbance. On those systems the PMTIMER/HPET based calibration logic with SMI detection shows better results. According to Alok also virtualized systems suffer from the PIT calibration method. The solution is to use a more wreckage aware aproach than the current either/or decision. 1) reimplement the retry loop which was dropped from the 32bit code during the merge. It repeats the calibration and selects the lowest frequency value as this is probably the closest estimate to the real frequency 2) Monitor the delta of the TSC values in the delay loop which waits for the PIT counter to reach zero. If the maximum value is significantly different from the minimum, then we have a pretty safe indicator that the loop was disturbed by an SMI. 3) keep the pmtimer/hpet reference as a backup solution for systems where the SMI disturbance is a permanent point of failure for PIT based calibration 4) do the loop iteration for both methods, record the lowest value and decide after all iterations finished. 5) Set a clear preference to PIT based calibration when the result makes sense. The implementation does the reference calibration based on HPET/PMTIMER around the delay, which is necessary for the PIT anyway, but keeps separate TSC values to ensure the "independency" of the resulting calibration values. Tested on various 32bit/64bit machines including Geode 266Mhz, AMD K6 (affected machine with a double speed pmtimer which I grabbed out of the dump), Pentium class machines and AMD/Intel 64 bit boxen. Bisected-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Ever since commit 4c563f76 ("[XFRM]: Speed up xfrm_policy and xfrm_state walking") it is illegal to call __xfrm_state_destroy (and thus xfrm_state_put()) with xfrm_state_lock held. If we do, we'll deadlock since we have the lock already and __xfrm_state_destroy() tries to take it again. Fix this by pushing the xfrm_state_put() calls after the lock is dropped. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
Fix a bug reported by and diagnosed by Aaron Straus. This is a regression intruduced into 2.6.26 by commit adc782da Author: Matt Mackall <mpm@selenic.com> Date: Tue Apr 29 01:03:07 2008 -0700 random: simplify and rename credit_entropy_store credit_entropy_bits() does: spin_lock_irqsave(&r->lock, flags); ... if (r->entropy_count > r->poolinfo->POOLBITS) r->entropy_count = r->poolinfo->POOLBITS; so there is a time window in which this BUG_ON(): static size_t account(struct entropy_store *r, size_t nbytes, int min, int reserved) { unsigned long flags; BUG_ON(r->entropy_count > r->poolinfo->POOLBITS); /* Hold lock while accounting */ spin_lock_irqsave(&r->lock, flags); can trigger. We could fix this by moving the assertion inside the lock, but it seems safer and saner to revert to the old behaviour wherein entropy_store.entropy_count at no time exceeds entropy_store.poolinfo->POOLBITS. Reported-by: NAaron Straus <aaron@merfinllc.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 John Kacur 提交于
Make PM_QOS and CPU_IDLE play nicer when run with the RT-Preempt kernel. The purpose of the patch is to remove the spin_lock around the read in the function pm_qos_requirement - since spinlocks can sleep in -rt and this function is called from idle. CPU_IDLE polls the target_value's of some of the pm_qos parameters from the idle loop causing sleeping locking warnings. Changing the target_value to an atomic avoids this issue. Remove the spinlock in pm_qos_requirement by making target_value an atomic type. Signed-off-by: Nmark gross <mgross@linux.intel.com> Signed-off-by: NJohn Kacur <jkacur@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Update rtc-cmos shutdown handling to leave RTC alarms active, resolving http://bugzilla.kernel.org/show_bug.cgi?id=11411 on several boards. There are still some systems where the ACPI event handling doesn't cooperate. (Possibly related to bugid 11312, reporting the spontaneous disabling of RTC events.) Bug 11411 reported that changes to work around some ACPI event issues broke wake-from-S5 handling, as used for DVR applications. (They like to power off, then wake later to record programs.) [yakui.zhao@intel.com: add shutdown for PNP devices] [dbrownell@users.sourceforge.net: update comments] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Stefan Bauer <stefan.bauer@cs.tu-chemnitz.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-