- 12 4月, 2013 1 次提交
-
-
由 Mark Brown 提交于
Firmwares may provide some firmware wide configuration regions which can be configured by the coefficient files using the firmware ID as the algorithm ID, include these in the algorithm list. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 4月, 2013 2 次提交
-
-
由 Mark Brown 提交于
Reported-by: NRyo Tsutsui <Ryo.Tsutsui@wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
由 Alban Bedel 提交于
The Charge Pump needs the DSP clock to work properly, without it the bypass to HP/LINEOUT is not working properly. This requirement is not mentioned in the datasheet but has been confirmed by Mark Brown from Wolfson. Signed-off-by: NAlban Bedel <alban.bedel@avionic-design.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 05 4月, 2013 1 次提交
-
-
由 Jiri Slaby 提交于
changed is not initialized in path_power_down_sync, but it is expected to be false in case no change happened in the loop. So set it to false. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 4月, 2013 6 次提交
-
-
由 Takashi Iwai 提交于
This reverts commit 6ab31741. The commit [6ab31741: ALSA: hda - Allow power_save_controller option override DCAPS] changed the behavior of power_save_controller so that it can override the driver capability. This assumed that this option is rarely changed dynamically unlike power_save option. Too naive. It turned out that the user-space power-management tool tries to set power_save_controller option to 1 together with power_save option without knowing what's actually doing. This enabled forcibly the runtime PM of the controller, which is known to be broken om many chips thus disabled as default. So, the only sane fix is to revert this commit again. It was intended to ease debugging/testing for runtime PM enablement, but obviously we need another way for it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=56171Reported-and-tested-by: NNikita Tsukanov <keks9n@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Rename "Digitial In" to "Digital In". This function is only used for proc output, so should not cause any problems to change. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rainer Koenig 提交于
* Added the device ID to the modalias list and assinged ALC662 patches for it * Added 4 port support for the device ID 0671 in alc662_parse_auto_config Signed-off-by: NRainer Koenig <Rainer.Koenig@ts.fujitsu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lars-Peter Clausen 提交于
The tegra dmaengine driver does not support pausing and resuming a DMA stream. The tegra PCM driver still claims to support pause and resume though and implements them by stopping and restarting the stream. This is not what an application using pause/resume would expect. Usually applications have support for working around PCMs which do not support suspend and resume, so don't set the SNDRV_PCM_INFO_PAUSE and SNDRV_PCM_INFO_RESUME flags for the tegra PCM and use the default snd_dmaengine_pcm_trigger callback. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Reviewed-by: NStephen Warren <swarren@nvidia.com> Tested-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Prathyush K 提交于
Currently, a new platform device is created for secondary device by calling platform_device_register_resndata and then the drvdata is set for this device. The following patch has been added to driver core: "driver core: fix possible missing of device probe". This results in the added device getting probed immediately but the drvdata for the secondary device is not yet set. This patch removes the platform_device_register_resndata call and instead calls platform_device_alloc, platform_set_drvdata and platform_device_add which fixes the above issue. Signed-off-by: NPrathyush K <prathyush.k@samsung.com> Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Prathyush K 提交于
This patch fixes a possible crash in case drvdata for the secondary device is not set. Signed-off-by: NPrathyush K <prathyush.k@samsung.com> Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 4月, 2013 1 次提交
-
-
由 Torstein Hegge 提交于
The C-Media CM6631 USB receiver doesn't respond to changes in sample rate while the interface is active. The same behavior is observed in other UAC2 hardware like the VIA VT1731. Reset the interface after setting the sampling frequency on sample rate changes, to ensure that the sample rate set by snd_usb_init_sample_rate() is used. Otherwise, the device will try to use the sample rate of the previous stream, causing distorted sound on sample rate changes. The reset is performed for all UAC2 devices, as it should not affect a standards compliant device, but it is only necessary for C-Media CM6631, VIA VT1731 and possibly others. Failure to read sample rate from the device is not handled as an error in set_sample_rate_v2(), as (permanent or intermittent) failure to read sample rate isn't essential for a successful sample rate set. Signed-off-by: NTorstein Hegge <hegge@resisty.net> Acked-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 4月, 2013 3 次提交
-
-
由 Mengdong Lin 提交于
This patch let ELD debug message show 'pin_eld->monitor_present' which reflects the real pin response to verb GET_PIN_SENSE. 'eld->monitor_present' should not be used here because 'eld' is a temp structure now and so its "monitor_present" is not set. Signed-off-by: NMengdong Lin <mengdong.lin@intel.com> Acked-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mengdong Lin 提交于
In function snd_hdmi_get_eld(), the variable 'ret' should be initialized to 0. Otherwise it will be returned uninitialized as non-zero after ELD info is got successfully. Thus hdmi_present_sense() will always assume ELD info is invalid by mistake, and /proc file system cannot show the proper ELD info. Signed-off-by: NMengdong Lin <mengdong.lin@intel.com> Cc: stable@vger.kernel.org Acked-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul Bolle 提交于
The Kconfig symbol SND_SOC_OF_SIMPLE got removed in commit f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support"). But that commit missed one instance. Remove it now, together with the prompt it has effectively hidden ever since. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 30 3月, 2013 3 次提交
-
-
由 Vinod Koul 提交于
while at it, update the copyright timeline too Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Now that we have regular register mapped controls we should be splitting the control sets for ADSP1 and ADSP2 as the register maps are not identical. Do that. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
For future work to have specific handling for some firmwares. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 3月, 2013 3 次提交
-
-
由 Charles Keepax 提交于
When a new stream is being opened it is necessary to cancel any delayed power down of the audio. [Fixed unused variable -- broonie] Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Charles Keepax 提交于
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lars-Peter Clausen 提交于
The ASoC core does no not modify the driver of a platform. Making it const allows ASoC platform drivers to declare the snd_soc_platform_driver struct as const. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 27 3月, 2013 20 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Without this, modules will fail to link against those symbols. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
siu_dai.c is using snd_soc_register_dais(), even though array size of siu_i2s_dai is 1. OTOH, new API snd_soc_register_component() uses properly snd_soc_register_dai() (henceforth dai()) or snd_soc_register_dais() (henceforth dais()) via num_dai. Then, cpu_dai_name will be "siu-i2s-dai" if dais() was used, and it will be "siu-pcm-audio" if dai() was used. Therefore this patch fixup migor_dai :: cpu_dai_name too. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
All drivers are using snd_soc_register_component() instead of snd_soc_register_dai[s]() snd_soc_[un]register_dai[s]() are no longer needed Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-