- 01 9月, 2014 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch is to skip the EEE initialisation when the stmmac is using a switch (with a fixed phy support). Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2014 2 次提交
-
-
由 Giuseppe CAVALLARO 提交于
Enabling DMA_API_DEBUG, warnings are reported at runtime because the device driver frees DMA memory with wrong functions and it does not call dma_mapping_error after mapping dma memory. The first problem is fixed by of introducing a flag that helps us keeping track which mapping technique was used, so that we can use the right API for unmap. This approach was inspired by the e1000 driver, which uses a similar technique. Signed-off-by: NAndre Draszik <andre.draszik@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: NDenis Kirjanov <kda@linux-powerpc.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
The PTP reference clock, used for setting the addend in the Timestamp Addend Register, was erroneously hard-coded (as reported in the databook just as example). The patch removes the macro named: STMMAC_SYSCLOCK and allows to use a reference clock (clk_ptp_ref_i) that can be passed from the platform. If not passed, the main driver clock will be used as default; note that this can be fine on some platforms. Note that, prior this patch, using the old STMMAC_SYSCLOCK on some platforms, as side effect, the ptp clock can move faster/slower than the system clock. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2014 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch is to fix the IPC bit into the GMAC control register that must be done after the core initialization otherwise it will not have any effect. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2014 3 次提交
-
-
由 Vince Bridgers 提交于
This patch adds and modifies code to support multiple Multicast and Unicast Synopsys MAC filter configurations. The default configuration is defined to support legacy driver behavior, which is 64 Multicast bins. The Unicast filter code previously assumed all controllers support 32 or 16 Unicast addresses based on controller version number, but this has been corrected to support a default of 1 Unicast address. The filter configuration may be specified through the devicetree using a Synopsys specific device tree entry. This information was verified with Synopsys through Synopsys Support Case #8000684337 and shared with the maintainer. Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vince Bridgers 提交于
This patch removes the check for the number of mulitcast addresses when using hash based filtering since it's not necessary. If the number of multicast addresses in the list exceeds the number of multicast hash bins, the bins will "fold" over into one of the bins configured and enabled for the particular component instance. The default number of maximum unicast addresses was changed from 32 to 1 since this number is not dependent on the component revision. The maximum number of multicast and unicast addresses is dependent on the configuration of the Synopsys EMAC configured by the SOC architect at the time the features were selected and configured for a particular component. Sadly, Synopsys does not provide a way to query the precise number supported by a particular component, so we must fall back on a devicetree entry. This configuration could vary from vendor to vendor (such as STMicro, Altera, etc). The multicast bins are set for every possible filtering case (including no entries) - previously the bits were set only if multicast filter entries were present. Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vince Bridgers 提交于
The synopsys EMAC can be configured for different numbers of multicast hash bins and perfect filter entries at device creation time and there's no way to query this configuration information at runtime. As a result, a devicetree parameter is required in order for the driver to program these filters correctly for a particular device instance. This patch modifies the 10/100/1000 MAC software interface such that these configuration parameters can be set at initialization time. Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2014 1 次提交
-
-
由 Vince Bridgers 提交于
This patch adds platform init/exit functions and modifications to support suspend/resume for the Altera Cyclone 5 SOC Ethernet controller. The platform exit function puts the controller into reset using the socfpga reset controller driver. The platform init function sets up the Synopsys mac by first making sure the Ethernet controller is held in reset, programming the phy mode through external support logic, then deasserts reset through the socfpga reset manager driver. Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 7月, 2014 1 次提交
-
-
由 David S. Miller 提交于
This reverts commit 0acf1676. Breaks the build due to missing reference to phy_resume in the resulting dwmac-socfpga.o object. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2014 1 次提交
-
-
由 Vince Bridgers 提交于
This patch adds platform init/exit functions and modifications to support suspend/resume for the Altera Cyclone 5 SOC Ethernet controller. The platform exit function puts the controller into reset using the socfpga reset controller driver. The platform init function sets up the Synopsys mac by first making sure the Ethernet controller is held in reset, programming the phy mode through external support logic, then deasserts reset through the socfpga reset manager driver. Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2014 1 次提交
-
-
由 Chen-Yu Tsai 提交于
The following patch moved device tree interrupt resolution into platform_get_irq_byname: ad69674e of/irq: do irq resolution in platform_get_irq_byname() As a result, the function no longer only return -ENXIO on error. This breaks DT based probing of stmmac, as seen in test runs of linux-next next-20140526 cubie2-sunxi_defconfig: http://lists.linaro.org/pipermail/kernel-build-reports/2014-May/003659.html This patch makes the stmmac_platform probe function properly handle error codes, such as returning for deferred probing, and other codes returned by of_irq_get_by_name. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
The stmmac_open call was calling clk_disable_unprepare on phy init failure, but it never calls clk_prepare_enable, this causes a WARN_ON in the clk framework to trigger if for some reason phy init fails. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2014 1 次提交
-
-
由 Florian Fainelli 提交于
stmmac_config() denies changing the base address and interrupt parameters, and ignores any other settings from the ifmap parameters, thus making stmmac_config() useless, remove it. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2014 1 次提交
-
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in stmmac_tx_clean that can be called in hard irq and other contexts. stmmac_tx_clean handles freeing successfully transmitted packets. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 12 3月, 2014 3 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch is to fix the chain mode that was broken and generated a panic. This patch reviews the chain/ring modes now shaing the same structure and taking care about the pointers and callbacks. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch is to fix and tune the default buffer sizes. It reduces the default bufsize used by the driver from 4KiB to 1536 bytes. Patch has been tested on both ARM and SH4 platform based. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch is to disable the EEE (so HW and timers) for example when the phy communicates that the EEE can be supported anymore. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2014 1 次提交
-
-
由 Tobias Klauser 提交于
alloc_dma_desc_resources() returns an error value and the next line actually checks for it, so assign the return value properly. Found by the coverity scanner. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2014 2 次提交
-
-
由 Hans de Goede 提交于
Logging the MAC address on every if-up, is not really useful, and annoying when there is no cable inserted and NetworkManager tries the ifup every 50 seconds. Also change the log level from warning to info, as that is what it is. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hans de Goede 提交于
Logging a PTP error on hw which simply does not support PTP is not very useful. Moreover this message gets logged on every if-up, and if there is no cable inserted NetworkManager will re-try the ifup every 50 seconds. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 1月, 2014 1 次提交
-
-
由 Vince Bridgers 提交于
These changes correct the following issues with jumbo frames on the stmmac driver: 1) The Synopsys EMAC can be configured to support different FIFO sizes at core configuration time. There's no way to query the controller and know the FIFO size, so the driver needs to get this information from the device tree in order to know how to correctly handle MTU changes and setting up dma buffers. The default max-frame-size is as currently used, which is the size of a jumbo frame. 2) The driver was enabling Jumbo frames by default, but was not allocating dma buffers of sufficient size to handle the maximum possible packet size that could be received. This led to memory corruption since DMAs were occurring beyond the extent of the allocated receive buffers for certain types of network traffic. kernel BUG at net/core/skbuff.c:126! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: CPU: 0 PID: 563 Comm: sockperf Not tainted 3.13.0-rc6-01523-gf7111b9 #31 task: ef35e580 ti: ef252000 task.ti: ef252000 PC is at skb_panic+0x60/0x64 LR is at skb_panic+0x60/0x64 pc : [<c03c7c3c>] lr : [<c03c7c3c>] psr: 60000113 sp : ef253c18 ip : 60000113 fp : 00000000 r10: ef3a5400 r9 : 00000ebc r8 : ef3a546c r7 : ee59f000 r6 : ee59f084 r5 : ee59ff40 r4 : ee59f140 r3 : 000003e2 r2 : 00000007 r1 : c0b9c420 r0 : 0000007d Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 2e8ac04a DAC: 00000015 Process sockperf (pid: 563, stack limit = 0xef252248) Stack: (0xef253c18 to 0xef254000) 3c00: 00000ebc ee59f000 3c20: ee59f084 ee59ff40 ee59f140 c04a9cd8 ee8c50c0 00000ebc ee59ff40 00000000 3c40: ee59f140 c02d0ef0 00000056 ef1eda80 ee8c50c0 00000ebc 22bbef29 c0318f8c 3c60: 00000056 ef3a547c ffe2c716 c02c9c90 c0ba1298 ef3a5838 ef3a5838 ef3a5400 3c80: 000020c0 ee573840 000055cb ef3f2050 c053f0e0 c0319214 22b9b085 22d92813 3ca0: 00001c80 004b8e00 ef3a5400 ee573840 ef3f2064 22d92813 ef3f2064 000055cb 3cc0: ef3f2050 c031a19c ef252000 00000000 00000000 c0561bc0 00000000 ff00ffff 3ce0: c05621c0 ef3a5400 ef3f2064 ee573840 00000020 ef3f2064 000055cb ef3f2050 3d00: c053f0e0 c031cad0 c053e740 00000e60 00000000 00000000 ee573840 ef3a5400 3d20: ef0a6e00 00000000 ef3f2064 c032507c 00010000 00000020 c0561bc0 c0561bc0 3d40: ee599850 c032799c 00000000 ee573840 c055a380 ef3a5400 00000000 ef3f2064 3d60: ef3f2050 c032799c 0101c7c0 2b6755cb c059a280 c030e4d8 000055cb ffffffff 3d80: ee574fc0 c055a380 ee574000 ee573840 00002b67 ee573840 c03fe9c4 c053fa68 3da0: c055a380 00001f6f 00000000 ee573840 c053f0e0 c0304fdc ef0a6e01 ef3f2050 3dc0: ee573858 ef031000 ee573840 c03055d8 c0ba0c40 ef000f40 00100100 c053f0dc 3de0: c053ffdc c053f0f0 00000008 00000000 ef031000 c02da948 00001140 00000000 3e00: c0563c78 ef253e5f 00000020 ee573840 00000020 c053f0f0 ef313400 ee573840 3e20: c053f0e0 00000000 00000000 c05380c0 ef313400 00001000 00000015 c02df280 3e40: ee574000 ef001e00 00000000 00001080 00000042 005cd980 ef031500 ef031500 3e60: 00000000 c02df824 ef031500 c053e390 c0541084 f00b1e00 c05925e8 c02df864 3e80: 00001f5c ef031440 c053e390 c0278524 00000002 00000000 c0b9eb48 c02df280 3ea0: ee8c7180 00000100 c0542ca8 00000015 00000040 ef031500 ef031500 ef031500 3ec0: c027803c ef252000 00000040 000000ec c05380c0 c0b9eb40 c0b9eb48 c02df940 3ee0: ef060780 ffffa4dd c0564a9c c056343c 002e80a8 00000080 ef031500 00000001 3f00: c053808c ef252000 fffec100 00000003 00000004 002e80a8 0000000c c00258f0 3f20: 002e80a8 c005e704 00000005 00000100 c05634d0 c0538080 c05333e0 00000000 3f40: 0000000a c0565580 c05380c0 ffffa4dc c05434f4 00400100 00000004 c0534cd4 3f60: 00000098 00000000 fffec100 002e80a8 00000004 002e80a8 002a20e0 c0025da8 3f80: c0534cd4 c000f020 fffec10c c053ea60 ef253fb0 c0008530 0000ffe2 b6ef67f4 3fa0: 40000010 ffffffff 00000124 c0012f3c 0000ffe2 002e80f0 0000ffe2 00004000 3fc0: becb6338 becb6334 00000004 00000124 002e80a8 00000004 002e80a8 002a20e0 3fe0: becb6300 becb62f4 002773bb b6ef67f4 40000010 ffffffff 00000000 00000000 [<c03c7c3c>] (skb_panic+0x60/0x64) from [<c02d0ef0>] (skb_put+0x4c/0x50) [<c02d0ef0>] (skb_put+0x4c/0x50) from [<c0318f8c>] (tcp_collapse+0x314/0x3ec) [<c0318f8c>] (tcp_collapse+0x314/0x3ec) from [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) from [<c031a19c>] (tcp_data_queue+0x480/0xe6c) [<c031a19c>] (tcp_data_queue+0x480/0xe6c) from [<c031cad0>] (tcp_rcv_established+0x180/0x62c) [<c031cad0>] (tcp_rcv_established+0x180/0x62c) from [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) from [<c032799c>] (tcp_v4_rcv+0x718/0x73c) [<c032799c>] (tcp_v4_rcv+0x718/0x73c) from [<c0304fdc>] (ip_local_deliver+0x98/0x274) [<c0304fdc>] (ip_local_deliver+0x98/0x274) from [<c03055d8>] (ip_rcv+0x420/0x758) [<c03055d8>] (ip_rcv+0x420/0x758) from [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) from [<c02df280>] (netif_receive_skb+0x48/0xb4) [<c02df280>] (netif_receive_skb+0x48/0xb4) from [<c02df824>] (napi_gro_flush+0x70/0x94) [<c02df824>] (napi_gro_flush+0x70/0x94) from [<c02df864>] (napi_complete+0x1c/0x34) [<c02df864>] (napi_complete+0x1c/0x34) from [<c0278524>] (stmmac_poll+0x4e8/0x5c8) [<c0278524>] (stmmac_poll+0x4e8/0x5c8) from [<c02df940>] (net_rx_action+0xc4/0x1e4) [<c02df940>] (net_rx_action+0xc4/0x1e4) from [<c00258f0>] (__do_softirq+0x12c/0x2e8) [<c00258f0>] (__do_softirq+0x12c/0x2e8) from [<c0025da8>] (irq_exit+0x78/0xac) [<c0025da8>] (irq_exit+0x78/0xac) from [<c000f020>] (handle_IRQ+0x44/0x90) [<c000f020>] (handle_IRQ+0x44/0x90) from [<c0008530>] (gic_handle_irq+0x2c/0x5c) [<c0008530>] (gic_handle_irq+0x2c/0x5c) from [<c0012f3c>] (__irq_usr+0x3c/0x60) 3) The driver was setting the dma buffer size after allocating dma buffers, which caused a system panic when changing the MTU. BUG: Bad page state in process ifconfig pfn:2e850 page:c0b72a00 count:0 mapcount:0 mapping: (null) index:0x0 page flags: 0x200(arch_1) Modules linked in: CPU: 0 PID: 566 Comm: ifconfig Not tainted 3.13.0-rc6-01523-gf7111b9 #29 [<c001547c>] (unwind_backtrace+0x0/0xf8) from [<c00122dc>] (show_stack+0x10/0x14) [<c00122dc>] (show_stack+0x10/0x14) from [<c03c793c>] (dump_stack+0x70/0x88) [<c03c793c>] (dump_stack+0x70/0x88) from [<c00b2620>] (bad_page+0xc8/0x118) [<c00b2620>] (bad_page+0xc8/0x118) from [<c00b302c>] (get_page_from_freelist+0x744/0x870) [<c00b302c>] (get_page_from_freelist+0x744/0x870) from [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) from [<c00b4858>] (__get_free_pages+0x10/0x54) [<c00b4858>] (__get_free_pages+0x10/0x54) from [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) from [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) from [<c02d240c>] (__alloc_skb+0x68/0x13c) [<c02d240c>] (__alloc_skb+0x68/0x13c) from [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) from [<c0279378>] (stmmac_open+0x63c/0x1024) [<c0279378>] (stmmac_open+0x63c/0x1024) from [<c02e18cc>] (__dev_open+0xa0/0xfc) [<c02e18cc>] (__dev_open+0xa0/0xfc) from [<c02e1b40>] (__dev_change_flags+0x94/0x158) [<c02e1b40>] (__dev_change_flags+0x94/0x158) from [<c02e1c24>] (dev_change_flags+0x18/0x48) [<c02e1c24>] (dev_change_flags+0x18/0x48) from [<c0337bc0>] (devinet_ioctl+0x638/0x700) [<c0337bc0>] (devinet_ioctl+0x638/0x700) from [<c02c7aec>] (sock_ioctl+0x64/0x290) [<c02c7aec>] (sock_ioctl+0x64/0x290) from [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) from [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) from [<c000e760>] The fixes have been verified using reproducible, automated testing. Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2014 3 次提交
-
-
由 damuzi000 提交于
When timestamping is enabled, stmmac_tx_clean will call stmmac_get_tx_hwtstamp to get tx TS. But the skb can be NULL because the last of its tx_skbuff is NULL if this packet frame is filled in more than one descriptors. To fix the issue, change the code: - Store TX skb to the tx_skbuff[] of frame's last segment. - Check skb is not NULL in stmmac_get_tx_hwtstamp. Signed-off-by: NBruce Liu <damuzi000@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chen-Yu Tsai 提交于
The DWMAC has a reset assert line, which is used on some SoCs. Add an optional reset control to stmmac driver core. To support reset control deferred probing, this patch changes the driver probe function to return the actual error, instead of just -EINVAL. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chen-Yu Tsai 提交于
The stmmac driver does not enable the main clock during the probe phase. If the clock was not enabled by the boot loader or was disabled by the kernel, hardware features and the MDIO bus would not be probed properly. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2014 7 次提交
-
-
由 Srinivas Kandagatla 提交于
In PM_SUSPEND_FREEZE and WOL(Wakeup On Lan) case, when the driver gets a wakeup event, either the driver or platform specific PM code should notify the pm core about it, so that the system can wakeup from low power. In cases where there is no involvement of platform specific PM, it becomes driver responsibility to notify the PM core to wakeup the system. Without this WOL with PM_SUSPEND_FREEZE does not work on STi based SOCs. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
This patch adds code to restore default pinstate of the pins when it comes back from low power state. Without this patch the state of the pins would be unknown and the driver would not work. This patch also adds code to put the pins in to sleep state when the driver enters low power state. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
In hibernation freeze case the driver just releases the resources like dma buffers, irqs, unregisters the drivers and during restore it does register, request the resources. This is not really necessary, as part of power management all the data structures are intact, all the previously allocated resources can be used after coming out of low power. This patch uses the suspend and resume callbacks for freeze and restore which initializes the hardware correctly without unregistering or releasing the resources, this should also help in reducing the time to restore. Also this patch fixes a bug in stmmac_pltfr_restore and stmmac_pltfr_freeze where it tries to get hold of platform data via dev_get_platdata call, which would return NULL in device tree cases and the next if statement would crash as there is no NULL check. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
The driver PM resume assumes that the IP is still powered up and the all the register contents are not disturbed when it comes out of low power suspend case. This assumption is wrong, basically the driver should not consider any state of registers after it comes out of low power. However driver can keep the part of the IP powered up if its a wake up source. But it can not assume the register state of the IP. Also its possible that SOC glue layer can take the power off the IP if its not wake-up source to reduce the power consumption. This patch re initializes hardware by calling stmmac_hw_setup function in resume case. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
This patch moves hardware setup part of the code in stmmac_open to a new function stmmac_hw_setup, the reason for doing this is to make hw initialization independent function so that PM functions can re-use it to re-initialize the IP after returning from low power state. This will also avoid code duplication across stmmac_resume/restore and stmmac_open. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
This patch moves dma resource allocation to a new function alloc_dma_desc_resources, the reason for moving this to a new function is to keep the memory allocations in a separate function. One more reason it to get suspend and hibernation cases working without releasing and allocating these resources during suspend-resume and freeze-restore cases. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
This patch adds support to "max-speed" property which is a standard Ethernet device tree property. max-speed specifies maximum speed (specified in megabits per second) supported the device. Depending on the clocking schemes some of the boards can only support few link speeds, so having a way to limit the link speed in the mac driver would allow such setups to work reliably. Without this patch there is no way to tell the driver to limit the link speed. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 1月, 2014 1 次提交
-
-
由 Vince Bridgers 提交于
GRO requires VLANs to be removed before aggregation can occur. The Synopsys EMAC does not strip VLAN tags so this must be done by the driver. Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 1月, 2014 1 次提交
-
-
由 stephen hemminger 提交于
Make variables only used in one file static. Also avoids possible namespace collisions. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 12月, 2013 1 次提交
-
-
由 Vince Bridgers 提交于
This patch corrects a problem in stmmac_ptp.c, functions stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks were released. This patch also addresses a problem in stmmac_main, function stmmac_init_ptp where the capability detection for advanced timestamping was masked by message masking. This patch was touch tested using linuxptp, and runs without the previously observed instabilities. More extensive testing is ongoing. Vince Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
stmmac_hwtstamp_ioctl() should validate all fields of hwtstamp_config before making any changes. Currently it sets the TX configuration before validating the rx_filter field. Compile-tested only. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2013 1 次提交
-
-
由 Sonic Zhang 提交于
driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set. Some synopsys ip implementation doesn't support DMA store and forward mode, such as BF60x. So, set force_thresh_dma_mode to use DMA thresholds only. Update document and devicetree as well. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 8月, 2013 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch removes the no_csum_insertion private parameter that is not used anymore and, also, the "likely" annotation from the condition that is not in a critical path. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 8月, 2013 1 次提交
-
-
In stmmac_init_rx_buffers(): * add missing handling of dma_map_single() error * remove superfluous unlikely() optimization while at it Add stmmac_free_rx_buffers() helper and use it in dma_free_rx_skbufs(). In init_dma_desc_rings(): * add missing handling of kmalloc_array() errors * fix handling of dma_alloc_coherent() and stmmac_init_rx_buffers() errors * make function return an error value on error and 0 on success In stmmac_open(): * add handling of init_dma_desc_rings() return value Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2013 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch is to fix a memory leak in the open method, it reviews error conditions freeing the resources previously allocated and not freed in cased of DMA failure. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2013 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
Prior this patch, the internal debugging was based on ifdef and also some printk were useless because many info are exposed via ethtool. This patch remove all the ifdef defines and now we only use netif_msg_XXX levels. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-