- 04 9月, 2011 1 次提交
-
-
由 Theodore Ts'o 提交于
If the user explicitly specifies conflicting mount options for delalloc or dioread_nolock and data=journal, fail the mount, instead of printing a warning and continuing (since many user's won't look at dmesg and notice the warning). Also, print a single warning that data=journal implies that delayed allocation is not on by default (since it's not supported), and furthermore that O_DIRECT is not supported. Improve the text in Documentation/filesystems/ext4.txt so this is clear there as well. Similarly, if the dioread_nolock mount option is specified when the file system block size != PAGE_SIZE, fail the mount instead of printing a warning message and ignoring the mount option. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 03 9月, 2011 3 次提交
-
-
由 Allison Henderson 提交于
This patch fixes a second punch hole bug found by xfstests 127. This bug happens because punch hole needs to flush the pages of the hole to avoid race conditions. But if the end of the hole is in the same page as i_size, the buffer heads beyond i_size need to be unmapped and the page needs to be zeroed after it is flushed. To correct this, the new ext4_discard_partial_page_buffers routine is used to zero and unmap the partial page beyond i_size if the end of the hole appears in the same page as i_size. The code has also been optimized to set the end of the hole to the page after i_size if the specified hole exceeds i_size, and the code that flushes the pages has been simplified. Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com>
-
由 Allison Henderson 提交于
This patch addresses a bug found by xfstests 75, 112, 127 when blocksize = 1k This bug happens because the punch hole code only zeros out non block aligned regions of the page. This means that if the blocks are smaller than a page, then the block aligned regions of the page inside the hole are left un-zeroed, and their buffer heads are still mapped. This bug is corrected by using ext4_discard_partial_page_buffers to properly zero the partial page at the head and tail of the hole, and unmap the corresponding buffer heads This patch also addresses a bug reported by Lukas while working on a new patch to add discard support for loop devices using punch hole. The bug happened because of the first and last block number needed to be cast to a larger data type before calculating the byte offset, but since now we only need the byte offsets of the pages, we no longer even need to be calculating the byte offsets of the blocks. The code to do the block offset calculations is removed in this patch. Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com>
-
由 Allison Henderson 提交于
This patch adds two new routines: ext4_discard_partial_page_buffers and ext4_discard_partial_page_buffers_no_lock. The ext4_discard_partial_page_buffers routine is a wrapper function to ext4_discard_partial_page_buffers_no_lock. The wrapper function locks the page and passes it to ext4_discard_partial_page_buffers_no_lock. Calling functions that already have the page locked can call ext4_discard_partial_page_buffers_no_lock directly. The ext4_discard_partial_page_buffers_no_lock function zeros a specified range in a page, and unmaps the corresponding buffer heads. Only block aligned regions of the page will have their buffer heads unmapped. Unblock aligned regions will be mapped if needed so that they can be updated with the partial zero out. This function is meant to be used to update a page and its buffer heads to be zeroed and unmapped when the corresponding blocks have been released or will be released. This routine is used in the following scenarios: * A hole is punched and the non page aligned regions of the head and tail of the hole need to be discarded * The file is truncated and the partial page beyond EOF needs to be discarded * The end of a hole is in the same page as EOF. After the page is flushed, the partial page beyond EOF needs to be discarded. * A write operation begins or ends inside a hole and the partial page appearing before or after the write needs to be discarded * A write operation extends EOF and the partial page beyond EOF needs to be discarded This function takes a flag EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED which is used when a write operation begins or ends in a hole. When the EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED flag is used, only buffer heads that are already unmapped will have the corresponding regions of the page zeroed. Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 01 9月, 2011 2 次提交
-
-
由 Theodore Ts'o 提交于
ext4_dx_add_entry manipulates bh2 and frames[0].bh, which are two buffer_heads that point to directory blocks assigned to the directory inode. However, the function calls ext4_handle_dirty_metadata with the inode of the file that's being added to the directory, not the directory inode itself. Therefore, correct the code to dirty the directory buffers with the directory inode, not the file inode. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Darrick J. Wong 提交于
ext4_mkdir calls ext4_handle_dirty_metadata with dir_block and the inode "dir". Unfortunately, dir_block belongs to the newly created directory (which is "inode"), not the parent directory (which is "dir"). Fix the incorrect association. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 31 8月, 2011 4 次提交
-
-
由 Darrick J. Wong 提交于
When ext4_rename performs a directory rename (move), dir_bh is a buffer that is modified to update the '..' link in the directory being moved (old_inode). However, ext4_handle_dirty_metadata is called with the old parent directory inode (old_dir) and dir_bh, which is incorrect because dir_bh does not belong to the parent inode. Fix this error. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Theodore Ts'o 提交于
Currently attempts to open a file with O_DIRECT in data=journal mode causes the open to fail with -EINVAL. This makes it very hard to test data=journal mode. So we will let the open succeed, but then always fall back to O_DSYNC buffered writes. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This doesn't make much sense, and it exposes a bug in the kernel where attempts to create a new file in an append-only directory using O_CREAT will fail (but still leave a zero-length file). This was discovered when xfstests #79 was generalized so it could run on all file systems. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc:stable@kernel.org
-
由 Jiaying Zhang 提交于
The i_mutex lock and flush_completed_IO() added by commit 2581fdc8 in ext4_evict_inode() causes lockdep complaining about potential deadlock in several places. In most/all of these LOCKDEP complaints it looks like it's a false positive, since many of the potential circular locking cases can't take place by the time the ext4_evict_inode() is called; but since at the very least it may mask real problems, we need to address this. This change removes the flush_completed_IO() and i_mutex lock in ext4_evict_inode(). Instead, we take a different approach to resolve the software lockup that commit 2581fdc8 intends to fix. Rather than having ext4-dio-unwritten thread wait for grabing the i_mutex lock of an inode, we use mutex_trylock() instead, and simply requeue the work item if we fail to grab the inode's i_mutex lock. This should speed up work queue processing in general and also prevents the following deadlock scenario: During page fault, shrink_icache_memory is called that in turn evicts another inode B. Inode B has some pending io_end work so it calls ext4_ioend_wait() that waits for inode B's i_ioend_count to become zero. However, inode B's ioend work was queued behind some of inode A's ioend work on the same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten thread on that cpu is processing inode A's ioend work, it tries to grab inode A's i_mutex lock. Since the i_mutex lock of inode A is still hold before the page fault happened, we enter a deadlock. Signed-off-by: NJiaying Zhang <jiayingz@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 21 8月, 2011 1 次提交
-
-
由 Josef Bacik 提交于
This fixes a regression introduced by commit cdcb725c ("Btrfs: check if there is enough space for balancing smarter"). We can't do 64-bit divides on 32-bit architectures. In cases where we need to divide/multiply by 2 we should just left/right shift respectively, and in cases where theres N number of devices use do_div. Also make the counters u64 to match up with rw_devices. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Acked-and-tested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 8月, 2011 1 次提交
-
-
由 Jiaying Zhang 提交于
There is a race between ext4 buffer write and direct_IO read with dioread_nolock mount option enabled. The problem is that we clear PageWriteback flag during end_io time but will do uninitialized-to-initialized extent conversion later with dioread_nolock. If an O_direct read request comes in during this period, ext4 will return zero instead of the recently written data. This patch checks whether there are any pending uninitialized-to-initialized extent conversion requests before doing O_direct read to close the race. Note that this is just a bandaid fix. The fundamental issue is that we clear PageWriteback flag before we really complete an IO, which is problem-prone. To fix the fundamental issue, we may need to implement an extent tree cache that we can use to look up pending to-be-converted extents. Signed-off-by: NJiaying Zhang <jiayingz@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 19 8月, 2011 2 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
CIFS cleanup_volume_info_contents() looks like having a memory corruption problem. When UNCip is set to "&vol->UNC[2]" in cifs_parse_mount_options(), it should not be kfree()-ed in cleanup_volume_info_contents(). Introduced in commit b946845aSigned-off-by: NJ.R. Okajima <hooanon05@yahoo.co.jp> Reviewed-by: NJeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 18 8月, 2011 4 次提交
-
-
由 Josef Bacik 提交于
xfstests exposed a problem with preallocate when it fallocates a range that already has an extent. We don't set the new i_size properly because we see that we already have an extent. This isn't right and we should update i_size if the space already exists. With this patch we now pass xfstests 075. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
There were some unlocks on error missing in a recent patch to btrfs_file_llseek(). Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Jeff Mahoney 提交于
This patch tightens the read-only access checks in btrfs_permission to match the constraints in inode_permission. Currently, even though the device node itself will be unmodified, read-write access to device nodes is denied to when the device node resides on a read-only subvolume or a is a file that has been marked read-only by the btrfs conversion utility. With this patch applied, the check only affects regular files, directories, and symlinks. It also restructures the code a bit so that we don't duplicate the MAY_WRITE check for both tests. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Timo Warns 提交于
Signed-off-by: NTimo Warns <warns@pre-sense.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 8月, 2011 13 次提交
-
-
由 Namjae Jeon 提交于
FAT16 support maximum 4GB vol/file size with 64KB cluster size. Win NT/XP/7 increased the maximum cluster size to 64KB, and file/vol size increased 4GB also. Although increasing, the file size of linux FAT is still limited at 2GB. I found that it is limited by sb->maxbytes(0x7fffffff) when partition is formatted by FAT16. sb->s_maxbytes in fill_super should be set to 0xffffffff like fat32. Signed-off-by: NNamjae Jeon <linkinjeon@gmail.com> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
由 Mihai Moldovan 提交于
The fat_msg function already formats the given message and appends a newline to it - we don't need to do this in the passed message string as well, or will end up with a blank line printed in the kernel log ring buffer. Also change the loglevel from error to warning. Signed-off-by: NMihai Moldovan <ionic@ionic.de> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
由 Jonas Aberg 提交于
This fixes a compile warning (unititialized variable) in the fat filesystem code. Signed-off-by: NJonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
由 Sage Weil 提交于
We need to truncate page cache pages for the clone ioctl target range or else we'll confuse ourselves to no end. If the old data was cached, we used to still see it (until remount). If the page was partially updated we used to get a mix of old and new data. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
sync_pending is uninitialized before it be used, fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
Btrfs subtracted the size of the allocated space twice when it allocated the space from the bitmap in the cluster, it broke the free space information and led to oops finally. And this patch also fixes the bug that ctl->free_space was subtracted without lock. Reported-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
We don't use the defrag struct on this path. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Li Zefan 提交于
We've stopped using highmem for extent buffers. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
The filesystem turns readonly instead of returning the error to the caller when detected error in btrfs_drop_snapshot(). and, because the caller doesn't check the error, the function type is changed to 'void'. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
When checking if there is enough space for balancing a block group, since we do not take raid types into consideration, we do not account corrent amounts of space that we needed. This makes us do some extra work before we get ENOSPC. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
When balancing, we'll first try to shrink devices for some space, but if it is working on a full multi-disk partition with raid protection, we may encounter a bug, that is, while shrinking, total_bytes may be less than bytes_used, and btrfs may allocate a dev extent that accesses out of device's bounds. Then we will not be able to write or read the data which stores at the end of the device, and get the followings: device fsid 0939f071-7ea3-46c8-95df-f176d773bfb6 devid 1 transid 10 /dev/sdb5 Btrfs detected SSD devices, enabling SSD mode btrfs: relocating block group 476315648 flags 9 btrfs: found 4 extents attempt to access beyond end of device sdb5: rw=145, want=546176, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546304, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546432, limit=546147 attempt to access beyond end of device sdb5: rw=145, want=546560, limit=546147 attempt to access beyond end of device Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
When btrfs recovers from a crash, it may hit the oops below: ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:4580! [...] RIP: 0010:[<ffffffffa03df251>] [<ffffffffa03df251>] btrfs_add_link+0x161/0x1c0 [btrfs] [...] Call Trace: [<ffffffffa03e7b31>] ? btrfs_inode_ref_index+0x31/0x80 [btrfs] [<ffffffffa04054e9>] add_inode_ref+0x319/0x3f0 [btrfs] [<ffffffffa0407087>] replay_one_buffer+0x2c7/0x390 [btrfs] [<ffffffffa040444a>] walk_down_log_tree+0x32a/0x480 [btrfs] [<ffffffffa0404695>] walk_log_tree+0xf5/0x240 [btrfs] [<ffffffffa0406cc0>] btrfs_recover_log_trees+0x250/0x350 [btrfs] [<ffffffffa0406dc0>] ? btrfs_recover_log_trees+0x350/0x350 [btrfs] [<ffffffffa03d18b2>] open_ctree+0x1442/0x17d0 [btrfs] [...] This comes from that while replaying an inode ref item, we forget to check those old conflicting DIR_ITEM and DIR_INDEX items in fs/file tree, then we will come to conflict corners which lead to BUG_ON(). Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Tested-by: NAndy Lutomirski <luto@mit.edu> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
We have a problem where if a user specifies discard but doesn't actually support it we will return EOPNOTSUPP from btrfs_discard_extent. This is a problem because this gets called (in a fashion) from the tree log recovery code, which has a nice little BUG_ON(ret) after it, which causes us to fail the tree log replay. So instead detect wether our devices support discard when we're adding them and then don't issue discards if we know that the device doesn't support it. And just for good measure set ret = 0 in btrfs_issue_discard just in case we still get EOPNOTSUPP so we don't screw anybody up like this again. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 16 8月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
Running the cthon tests on a recent kernel caused this message to pop occasionally: CIFS VFS: did not end path lookup where expected namelen is 0 Some added debugging showed that namelen and dfsplen were both 0 when this occurred. That means that the read_seqretry returned true. Assuming that the comment inside the if statement is true, this should be harmless and just means that we raced with a rename. If that is the case, then there's no need for alarm and we can demote this to cFYI. While we're at it, print the dfsplen too so that we can see what happened here if the message pops during debugging. Cc: stable@kernel.org Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 14 8月, 2011 3 次提交
-
-
由 Theodore Ts'o 提交于
Bug discovered by Jan Kara: Finally, commit 1449032b returned back the old IO submission code but apparently it forgot to return the old handling of uninitialized buffers so we unconditionnaly call block_write_full_page() without specifying end_io function. So AFAICS we never convert unwritten extents to written in some cases. For example when I mount the fs as: mount -t ext4 -o nomblk_io_submit,dioread_nolock /dev/ubdb /mnt and do int fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC, 0600); char buf[1024]; memset(buf, 'a', sizeof(buf)); fallocate(fd, 0, 0, 16384); write(fd, buf, sizeof(buf)); I get a file full of zeros (after remounting the filesystem so that pagecache is dropped) instead of seeing the first KB contain 'a's. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Tao Ma 提交于
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten should be done simultaneously since ext4_end_io_nolock always clear the flag and decrease the counter in the same time. We don't increase i_aiodio_unwritten when setting EXT4_IO_END_UNWRITTEN so it will go nagative and causes some process to wait forever. Part of the patch came from Eric in his e-mail, but it doesn't fix the problem met by Michael actually. http://marc.info/?l=linux-ext4&m=131316851417460&w=2 Reported-and-Tested-by: Michael Tokarev<mjt@tls.msk.ru> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NTao Ma <boyu.mt@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Jiaying Zhang 提交于
Flush inode's i_completed_io_list before calling ext4_io_wait to prevent the following deadlock scenario: A page fault happens while some process is writing inode A. During page fault, shrink_icache_memory is called that in turn evicts another inode B. Inode B has some pending io_end work so it calls ext4_ioend_wait() that waits for inode B's i_ioend_count to become zero. However, inode B's ioend work was queued behind some of inode A's ioend work on the same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten thread on that cpu is processing inode A's ioend work, it tries to grab inode A's i_mutex lock. Since the i_mutex lock of inode A is still hold before the page fault happened, we enter a deadlock. Also moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode(). During inode deleteion, ext4_evict_inode() is called before ext4_destroy_inode() and in ext4_evict_inode(), we may call ext4_truncate() without holding i_mutex lock. As a result, there is a race between flush_completed_IO that is called from ext4_ext_truncate() and ext4_end_io_work, which may cause corruption on an io_end structure. This change moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode() to resolve the race between ext4_truncate() and ext4_end_io_work during inode deletion. Signed-off-by: NJiaying Zhang <jiayingz@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 13 8月, 2011 3 次提交
-
-
由 Curt Wohlgemuth 提交于
ext4_should_writeback_data() had an incorrect sequence of tests to determine if it should return 0 or 1: in particular, even in no-journal mode, 0 was being returned for a non-regular-file inode. This meant that, in non-journal mode, we would use ext4_journalled_aops for directories, symlinks, and other non-regular files. However, calling journalled aop callbacks when there is no valid handle, can cause problems. This would cause a kernel crash with Jan Kara's commit 2d859db3 ("ext4: fix data corruption in inodes with journalled data"), because we now dereference 'handle' in ext4_journalled_write_end(). I also added BUG_ONs to check for a valid handle in the obviously journal-only aops callbacks. I tested this running xfstests with a scratch device in these modes: - no-journal - data=ordered - data=writeback - data=journal All work fine; the data=journal run has many failures and a crash in xfstests 074, but this is no different from a vanilla kernel. Signed-off-by: NCurt Wohlgemuth <curtw@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Chandra Seetharaman 提交于
Since we just checked bp for NULL, it is ok to replace xfs_buf_geterror() with bp->b_error in these places. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Chandra Seetharaman 提交于
Check the return value of xfs_buf_read() for NULL and return ENOMEM if it is NULL. This is necessary in a few spots to avoid subsequent code blindly dereferencing the null buffer pointer. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 12 8月, 2011 2 次提交
-
-
由 Boaz Harrosh 提交于
Just like files-layout, blocks & objects layouts are part of the NFS 4.1 protocol and should be automatically selected if NFS_4_1 is selected. The small problem is that these depend on other Kernel support being present, while files only depends on NFS itself. This patch removes from the user choice the presence of objects and blocks layout. But makes sure these are selected only if the depended subsystems are present in the Kernel. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Acked-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
Commit df5e6223 ("ext4: fix deadlock in ext4_symlink() in ENOSPC conditions") recalculated the number of credits needed for a long symlink, in the process of splitting it into two transactions. However, the first credit calculation under-counted because if selinux is enabled, credits are needed to create the selinux xattr as well. Overrunning the reservation will result in an OOPS in jbd2_journal_dirty_metadata() due to this assert: J_ASSERT_JH(jh, handle->h_buffer_credits > 0); Fix this by increasing the reservation size. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NJan Kara <jack@suse.cz> Acked-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-