For reuse later.
Signed-off-by: NAvi Kivity <avi@redhat.com>

So it can call emulate_gp() without forward declarations.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Needed for segment read/write checks.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Preparing to add segment checks.
Signed-off-by: NAvi Kivity <avi@redhat.com>

It's going to get more complicated soon.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Will help later adding proper segment checks.
Signed-off-by: NAvi Kivity <avi@redhat.com>

VMMCALL requires EFER.SVME to be enabled in the host, not in the guest, which
is what check_svme() checks.
Signed-off-by: NAvi Kivity <avi@redhat.com>

VMMCALL needs the VendorSpecific tag so that #UD emulation
(called if a guest running on AMD was migrated to an Intel host)
is allowed to process the instruction.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds code to check for IOIO intercepts on
instructions decoded by the KVM instruction emulator.

[avi: fix build error due to missing #define D2bvIP]
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch add intercept checks for emulated one-byte
instructions to the KVM instruction emulation path.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds intercepts checks for the remaining twobyte
instructions to the KVM instruction emulator.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch implements the emulator intercept checks for the
RDTSCP, MONITOR, and MWAIT instructions.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds the necessary code changes in the
instruction emulator and the extensions to svm.c to
implement intercept checks for the svm instructions.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch add intercept checks into the KVM instruction
emulator to check for the 8 instructions that access the
descriptor table addresses.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds the intercept checks for instruction
accessing the debug registers.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds all necessary intercept checks for
instructions that access the crX registers.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds a callback into kvm_x86_ops so that svm and
vmx code can do intercept checks on emulated instructions.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds a flag for the opcoded to tag instruction
which are only recognized in protected mode. The necessary
check is added too.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds a check_perm callback for each opcode into
the instruction emulator. This will be used to do all
necessary permission checks on instructions before checking
whether they are intercepted or not.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch prevents the changed CPU state to be written back
when the emulator detected that the instruction was
intercepted by the guest.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add intercept codes for instructions defined by SVM as
interceptable.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When running in guest mode, certain instructions can be intercepted by
hardware.  This also holds for nested guests running on emulated
virtualization hardware, in particular instructions emulated by kvm
itself.

This patch adds a framework for intercepting instructions.  If an
instruction is marked for interception, and if we're running in guest
mode, a callback is called to check whether an intercept is needed or
not.  The callback is called at three points in time: immediately after
beginning execution, after checking privilge exceptions, and after
checking memory exception.  This suits the different interception points
defined for different instructions and for the various virtualization
instruction sets.

In addition, a new X86EMUL_INTERCEPT is defined, which any callback or
memory access may define, allowing the more complicated intercepts to be
implemented in existing callbacks.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Add support for marking an instruction as SSE, switching registers used
to the SSE register file.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Most SIMD instructions use the 66/f2/f3 prefixes to distinguish between
different variants of the same instruction.  Usually the encoding is quite
regular, but in some cases (including non-SIMD instructions) the prefixes
generate very different instructions.  Examples include XCHG/PAUSE,
MOVQ/MOVDQA/MOVDQU, and MOVBE/CRC32.

Allow the emulator to handle these special cases by splitting such opcodes
into groups, with different decode flags and execution functions for different
prefixes.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently we store a rep prefix as 1 or 2 depending on whether it is a REPE or
REPNE.  Since sse instructions depend on the prefix value, store it as the
original opcode to simplify things further on.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently if io port + len crosses 8bit boundary in io permission bitmap the
check may allow IO that otherwise should not be allowed. The patch fixes that.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Current implementation truncates upper 32bit of TR base address during IO
permission bitmap check. The patch fixes this.
Reported-and-tested-by: NFrancis Moreau <francis.moro@gmail.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Mark some instructions as vendor specific, and allow the caller to request
emulation only of vendor specific instructions.  This is useful in some
circumstances (responding to a #UD fault).
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

In case of a nested page fault or an intercepted #PF newer SVM
implementations provide a copy of the faulting instruction bytes
in the VMCB.
Use these bytes to feed the instruction emulator and avoid the costly
guest instruction fetch in this case.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Immediately after we generate an exception, we want a X86EMUL_PROPAGATE_FAULT
constant, so return it from the generation functions.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Instead of checking for X86EMUL_PROPAGATE_FAULT, check for any error,
making the callers more reliable.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If rc == X86EMUL_PROPAGATE_FAULT, we would have returned earlier.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This way, they can return #GP, not just #PF.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Introduce a structure that can contain an exception to be passed back
to main kvm code.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Linear addresses are supposed to already have segment checks performed on them;
if we play with these addresses the checks become invalid.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently the x86 emulator converts the segment register associated with
an operand into a segment base which is added into the operand address.
This loss of information results in us not doing segment limit checks properly.

Replace struct operand's addr.mem field by a segmented_address structure
which holds both the effetive address and segment.  This will allow us to
do the limit check at the point of access.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Failed emulation is reported via a tracepoint; the cmps printk is pointless.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>