- 08 10月, 2008 24 次提交
-
-
由 Jan Engelhardt 提交于
When a match or target is looked up using xt_find_{match,target}, Xtables will also search the NFPROTO_UNSPEC module list. This allows for protocol-independent extensions (like xt_time) to be reused from other components (e.g. arptables, ebtables). Extensions that take different codepaths depending on match->family or target->family of course cannot use NFPROTO_UNSPEC within the registration structure (e.g. xt_pkttype). Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Jan Engelhardt 提交于
The netfilter subsystem only supports a handful of protocols (much less than PF_*) and even non-PF protocols like ARP and pseudo-protocols like PF_BRIDGE. By creating NFPROTO_*, we can earn a few memory savings on arrays that previously were always PF_MAX-sized and keep the pseudo-protocols to ourselves. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Jan Engelhardt 提交于
This updates xt_recent to support the IPv6 address family. The new /proc/net/xt_recent directory must be used for this. The old proc interface can also be configured out. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Jan Engelhardt 提交于
Like with other modules (such as ipt_state), ipt_recent.h is changed to forward definitions to (IOW include) xt_recent.h, and xt_recent.c is changed to use the new constant names. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Jan Engelhardt 提交于
and (try to) consistently use u_int8_t for the L3 family. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The content of init_ipv6_mibs/cleanup_ipv6_mibs will be moved to new calls one by one next. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Unused net variable will become used very soon. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
idev has been stored on seq->private. NULL has been stored for global statistics. The situation is changed with net namespace. We need to store pointer to struct net and the only place is seq->private. So, we'll have for /proc/net/dev_snmp6/* and for /proc/net/snmp6 pointers of two different types stored in the same field. This effectively requires to separate seq_ops of these files. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Simple, comsolidate sockstat6 staff in one place, at the beginning of the file. Right now sockstat6_seq_open/sockstat6_seq_fops looks like an intrusion in the middle of snmp6 code. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Do the same for /proc/net/snmp6. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
I'm quite sure that if I give this function in its old format for you to inspect, you start to wonder what is the type of demanded or if it's a global variable. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
It all started from me noticing that this urgent check in tcp_clean_rtx_queue is unnecessarily inside the loop. Then I took a longer look to it and found out that the users of urg_mode can trivially do without, well almost, there was one gotcha. Bonus: those funny people who use urg with >= 2^31 write_seq - snd_una could now rejoice too (that's the only purpose for the between being there, otherwise a simple compare would have done the thing). Not that I assume that the rest of the tcp code happily lives with such mind-boggling numbers :-). Alas, it turned out to be impossible to set wmem to such numbers anyway, yes I really tried a big sendfile after setting some wmem but nothing happened :-). ...Tcp_wmem is int and so is sk_sndbuf... So I hacked a bit variable to long and found out that it seems to work... :-) Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Zijlstra 提交于
Add some packet-split receive hooks. For one this allows to do NUMA node affine page allocs. Later on these hooks will be extended to do emergency reserve allocations for fragments. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Zijlstra 提交于
Wrap calling sk->sk_backlog_rcv() in a function. This will allow extending the generic sk_backlog_rcv behaviour. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Zijlstra 提交于
This makes that ip6_route_net_init() does all of the route init code. There used to be a race between ip6_route_net_init() and ip6_net_init() and someone relying on the combined result was left out cold. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Zijlstra 提交于
ip6_route_net_init() error handling looked less than solid, fix 'er up. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KOVACS Krisztian 提交于
Use the socket cached in the skb if it's present. Signed-off-by: NKOVACS Krisztian <hidden@sch.bme.hu> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KOVACS Krisztian 提交于
To be able to use the cached socket reference in the skb during input processing we add a new set of lookup functions that receive the skb on their argument list. Signed-off-by: NKOVACS Krisztian <hidden@sch.bme.hu> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
To be able to use the cached socket reference in the skb during input processing we add a new set of lookup functions that receive the skb on their argument list. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NKOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2008 3 次提交
-
-
由 David S. Miller 提交于
Based upon a report by Vito Caputo. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
qdisc->requeue was planned to universally replace all requeuing code, but at the top level we never requeue more than one skb, so qdisc-> gso_skb is enough for this. qdisc->requeue would be used on the lower levels only for one level deep requeuing (like in sch_hfsc) after finishing all the changes. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Jay Cliburn noticed and diagnosed a bug triggered in dev_gso_skb_destructor() after last change from qdisc->gso_skb to qdisc->requeue list. Since gso_segmented skbs can't be queued to another list this patch brings back qdisc->gso_skb for them. Reported-by: NJay Cliburn <jcliburn@gmail.com> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2008 8 次提交
-
-
由 Arnaud Ebalard 提交于
Provides implementation of the enhancements of XFRM/PF_KEY MIGRATE mechanism specified in draft-ebalard-mext-pfkey-enhanced-migrate-00. Defines associated PF_KEY SADB_X_EXT_KMADDRESS extension and XFRM/netlink XFRMA_KMADDRESS attribute. Signed-off-by: NArnaud Ebalard <arno@natisbad.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
This protocol provides some connection handling and negotiated congestion control. Nokia cellular modems use it for bulk transfers. It provides packet boundaries (hence SOCK_SEQPACKET). Congestion control is per packet rather per byte, so we do not re-use the generic socket memory accounting. Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Found during the (partial) unregister_netdevice audit that we didn't have to have :) It looks like a couple of Sun NIC drivers had unregister_netdevice when they really meant unregister_netdev. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2008 5 次提交
-
-
由 Vlad Yasevich 提交于
The INIT perameter carries the adapatation value in network-byte order. We need to store it in host byte order as expected by data types and the user API. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
This patch enables cookie-echo retransmission transport switch feature. If COOKIE-ECHO retransmission happens, it will be sent to the address other than the one last sent to. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Wei Yongjun 提交于
RFC3873 defined SCTP_MIB_OUTOFBLUES: sctpOutOfBlues OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out of the blue packets received by the host. An out of the blue packet is an SCTP packet correctly formed, including the proper checksum, but for which the receiver was unable to identify an appropriate association." REFERENCE "Section 8.4 in RFC2960 deals with the Out-Of-The-Blue (OOTB) packet definition and procedures." But OOTB packet INIT, INIT-ACK and SHUTDOWN-ACK(COOKIE-WAIT or COOKIE-ECHOED state) are not counted by SCTP_MIB_OUTOFBLUES. Case 1(INIT): Endpoint A Endpoint B (CLOSED) (CLOSED) INIT ----------> <---------- ABORT Case 2(INIT-ACK): Endpoint A Endpoint B (CLOSED) (CLOSED) INIT-ACK ----------> <---------- ABORT Case 3(SHUTDOWN-ACK): Endpoint A Endpoint B (CLOSED) (CLOSED) <---------- INIT SHUTDOWN-ACK ----------> <---------- SHUTDOWN-COMPLETE Case 4(SHUTDOWN-ACK): Endpoint A Endpoint B (CLOSED) (COOKIE-ECHOED) SHUTDOWN-ACK ----------> <---------- SHUTDOWN-COMPLETE This patch fixed the problem. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Wei Yongjun 提交于
RFC 4960: Section 9.2 The sender of the SHUTDOWN MAY also start an overall guard timer 'T5-shutdown-guard' to bound the overall time for the shutdown sequence. At the expiration of this timer, the sender SHOULD abort the association by sending an ABORT chunk. If the 'T5-shutdown- guard' timer is used, it SHOULD be set to the recommended value of 5 times 'RTO.Max'. The timer 'T5-shutdown-guard' is used to counter the overall time for shutdown sequence, and it's start by the sender of the SHUTDOWN. So timer 'T5-shutdown-guard' should be start when we send the first SHUTDOWN chunk and enter the SHUTDOWN-SENT state, not start when we receipt of the SHUTDOWN primitive and enter SHUTDOWN-PENDING state. If 'T5-shutdown-guard' timer is start at SHUTDOWN-PENDING state, the association may be ABORT while data is still transmitting. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
sctp_is_any() function that is used to check for wildcard addresses only looks at the address itself to determine the address family. This function is used in the API to check the address passed in from the user. If the user simply zerroes out the sockaddr_storage and pass that in, we'll end up failing. So, let's try harder to determine the address family by also checking the socket if it's possible. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-