The following patch support the SMC9111 present on DB1200 boards.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

 o Try to work around some of the undocumented "features" of the SAA9730
 o Use netdev_priv() instead of the previous broken mechanism to allocate
   the private data structure.
 o Try to make sure we don't leak resources on exit.
 o No more need to call SET_MODULE_OWNER in 2.6.
 o Use pci_free_consistent instead of homegrown architecture-specific
   allocation.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/saa9730.c |  531 +++++++++++++++++++++++---------------------------
 1 files changed, 249 insertions(+), 282 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Kill trailing whitespace, replace leading whitespace with tabs.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/saa9730.c |   98 +++++++++++++++++++++++++-------------------------
 1 files changed, 49 insertions(+), 49 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Added phy address 0 to the phy scan.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>

This patch contains support for different modes of interrupt mitigation
of forcedeth. It includes changes based on Jeff's comments. Currently,
the modes are changed through module parameters since ethtool does not
support something similar.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>

To ensure that phy_mask and any future elements of the mii_bus
structure are initialized use kzalloc() instead of kmalloc().

This fixes an issue in which phy_mask was not being initialized
and we would skip random phy addresses when scanning.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 7/7] s390: mail address changed

From: Frank Pavlic <fpavlic@de.ibm.com>
	- mail address changed to fpavlic@de.ibm.com
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 lcs.c       |    4 ++--
 qeth_main.c |    4 ++--
 qeth_mpc.c  |    2 +-
 qeth_mpc.h  |    2 +-
 qeth_sys.c  |    2 +-
 qeth_tso.h  |    2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 6/7] s390: introduce guestLan sniffer support in qeth

From: Peter Tiedemann  <ptiedem@de.ibm.com>
	- introduce guestLan sniffer support in qeth
	  feature allows a linux in a virtual machine
	  guest to become a network LAN sniffer,
	  monitoring and recording the networking traffic
	  within an entire guestLan.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h      |    2 +
 qeth_main.c |   93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 qeth_mpc.h  |   11 ++++---
 3 files changed, 102 insertions(+), 4 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 5/7] s390: fix recovery failure of non-guestLAN devices

From: Frank Pavlic <fpavlic@de.ibm.com>
	- Recovery of non-guestLAN Layer 2 device failed due to
	  trying to register the real MAC address we got from
	  the READ_MAC adapter parameters command.
	  We have to keep the "old" MAC address when we process
	  the reply of a READ_MAC.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h      |   12 ++++++------
 qeth_main.c |   27 ++++++++++++++++-----------
 2 files changed, 22 insertions(+), 17 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 4/7] s390: some more qeth fixes

From: Frank Pavlic <fpavlic@de.ibm.com>
From: Peter Tiedemann <ptiedem@de.ibm.com>
	- possible race on list fixed by reset
	  list processing after every operation
	- traffic hang fixed
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |   11 +++++++----
 1 files changed, 7 insertions(+), 4 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 3/7] s390: qeth multicast address registration fixed

From: Klaus Dieter Wacker <kdwacker@de.ibm.com>
	- when running in Layer2 mode we don't have to register
	  the multicast IP address but only group mac address.
	  Therefore for Layer 2 devices it is enough to go
	  through dev->mc_list list and register these entries.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |  106 +++++++++++++++++++++++++++++++++++++++++++++---------------
 1 files changed, 80 insertions(+), 26 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 2/7] s390: minor modification in qeth layer2 code

From: Frank Pavlic <fpavlic@de.ibm.com>
	- use qeth_layer2_send_setdelvlan_cb to check
	  return code of a SET/DELVLAN IP Assist command.
	  It fits better in qeth's design and mechanism of IP Assist
	  command handling.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |   40 ++++++++++++++++++++++++++--------------
 1 files changed, 26 insertions(+), 14 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 1/7] s390: synthax checking for VIPA addresses fixed

From: Peter Tiedemann <ptiedem@de.ibm.com>
	- synthax checking for VIPA addresses fixed
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h     |   65 ++++++++++++++++++++++++++++++++++++++++++++++++-------------
 qeth_sys.c |    6 ++---
 2 files changed, 55 insertions(+), 16 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

* Merge PCMCIA card table with new Brodowski PCMCIA id table.
* Add missing entries to PCMCIA id table.
* Other tweaks to conform with Documentation/driver-changes.txt
  (types, call request_region, etc)
* Fix size of requested IO region.
* Reduce printk verbosity.
* Remove EXPERIMENTAL
* tweak to association code - don't force shared key authentication
  when wep in use.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

At the moment ibmveth has DEBUG enabled which is rather verbose. Disable
it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Current upstream 'allmodconfig' build is broken.  This is the obvious
patch...
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

Use "hints" to speed up the SACK processing. Various forms 
of this have been used by TCP developers (Web100, STCP, BIC)
to avoid the 2x linear search of outstanding segments.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Minor spelling fixes for TCP code.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a patch for discussion addressing some receive buffer growing issues.
This is partially related to the thread "Possible BUG in IPv4 TCP window
handling..." last week.

Specifically it addresses the problem of an interaction between rcvbuf
moderation (receiver autotuning) and rcv_ssthresh.  The problem occurs when
sending small packets to a receiver with a larger MTU.  (A very common case I
have is a host with a 1500 byte MTU sending to a host with a 9k MTU.)  In
such a case, the rcv_ssthresh code is targeting a window size corresponding
to filling up the current rcvbuf, not taking into account that the new rcvbuf
moderation may increase the rcvbuf size.

One hunk makes rcv_ssthresh use tcp_rmem[2] as the size target rather than
rcvbuf.  The other changes the behavior when it overflows its memory bounds
with in-order data so that it tries to grow rcvbuf (the same as with
out-of-order data).

These changes should help my problem of mixed MTUs, and should also help the
case from last week's thread I think.  (In both cases though you still need
tcp_rmem[2] to be set much larger than the TCP window.)  One question is if
this is too aggressive at trying to increase rcvbuf if it's under memory
stress.

Orignally-from: John Heffner <jheffner@psc.edu>
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is an updated version of the RFC3465 ABC patch originally
for Linux 2.6.11-rc4 by Yee-Ting Li. ABC is a way of counting
bytes ack'd rather than packets when updating congestion control.

The orignal ABC described in the RFC applied to a Reno style
algorithm. For advanced congestion control there is little
change after leaving slow start.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move all the code that does linear TCP slowstart to one
inline function to ease later patch to add ABC support.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simplify the code that comuputes microsecond rtt estimate used
by TCP Vegas. Move the callback out of the RTT sampler and into
the end of the ack cleanup.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP peformance with TSO over networks with delay is awful.
On a 100Mbit link with 150ms delay, we get 4Mbits/sec with TSO and
50Mbits/sec without TSO.

The problem is with TSO, we intentionally do not keep the maximum
number of packets in flight to fill the window, we hold out to until 
we can send a MSS chunk. But, we also don't update the congestion window 
unless we have filled, as per RFC2861.

This patch replaces the check for the congestion window being full
with something smarter that accounts for TSO.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After much testing and agony, I've discovered that my previous ohci1394
quirk for Toshiba laptops is not 100% reliable.  It apparently fails to
do the interrupt line change either correctly or in time, since in about
2 out of 5 boots, the kernel's irqdebug code will *still* disable irq 11
when the ohci1394 driver is loaded (at pci_enable_device time I think).

This patch switches things around a little in the workaround.  First, it
removes the mdelay.  I didn't see a need for it and my testing has shown
that it's not necessary for the quirk to work.

Secondly, instead of trying to change the interrupt line to what ACPI
tells us it should be, this patch makes the quirk use the value in the
PCI_INTERRUPT_LINE register.  On this laptop at least, that seems to be
the right thing to do, though additional testing on other laptops and/or
with actual firewire devices would be appreciated.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRajesh Shah <rajesh.shah@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

MSI hardcoded delivery mode to use logical delivery mode. Recently
x86_64 moved to use physical mode addressing to support physflat mode.
With this mode enabled noticed that my eth with MSI werent working.

msi_address_init()  was hardcoded to use logical mode for i386 and x86_64.
So when we switch to use physical mode, things stopped working.

Since anyway we dont use lowest priority delivery with MSI, its always
directed to just a single CPU. Its safe  and simpler to use
physical mode always, even when we use logical delivery mode for IPI's
or other ioapic RTE's.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch contains the following cleanups:
- access.c should #include "pci.h" for getting the prototypes of it's
  global functions
- hotplug/shpchp_pci.c: make the needlessly global function
  program_fw_provided_values() static
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pci_ids cleanup: fixup bt87x.c: two macro defined IDs missed in prior cleanup.

Caught by Chun-Chung Chen <cjj@u.washington.edu>: "In the patch for bt87x.c,
you seemed have missed the two occurrences of BT_DEVICE on line 897 and
line 898."
Signed-off-by: NGrant Coady <gcoady@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch contains the driver bits for enabling DLPAR and PCI Hotplug
for the new OF-based PCI probe.  This functionality was regressed when
the new PCI approach was introduced.  Please apply if appropriate.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A nice feature of sysfs is that it can create the symlink from the
driver to the module that is contained in it.

It requires that the device_driver.owner is set, what is not the
case for many PCI drivers.

This patch allows pci_register_driver to set automatically the
device_driver.owner for any PCI driver.

Credits to Al Viro who suggested the method.
Signed-off-by: NLaurent Riffard <laurent.riffard@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
--

 drivers/ide/setup-pci.c  |   12 +++++++-----
 drivers/pci/pci-driver.c |    9 +++++----
 include/linux/ide.h      |    3 ++-
 include/linux/pci.h      |   10 ++++++++--
 4 files changed, 22 insertions(+), 12 deletions(-)