Stop downgrading TDLS chandef when reaching the AP BW. The AP provides
the necessary regulatory protection in this case.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=153961, which
reported an infinite loop here.
Reported-by: NKamil Toman <kamil.toman@gmail.com>
Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This reverts commit 3d5fdff4.

Ben Hutchings pointed out that the commit isn't safe since it assumes
that the structure used by the driver is iw_point, when in fact there's
no way to know about that.

Fortunately, the only driver in the tree that ever runs this code path
is the wilc1000 staging driver, so it doesn't really matter.

Clearly I should have investigated this better before applying, sorry.
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org [though I guess it doesn't matter much]
Fixes: 3d5fdff4 ("wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The variable is added to allow the driver an easy access to
it's own hw->priv when the op is invoked.

This fixes a crash in wlcore because it was relying on a
station pointer that wasn't initialized yet. It's the wrong
way to fix the crash, but it solves the problem for now and
it does make sense to have the hw pointer here.
Signed-off-by: NMaxim Altshul <maxim.altshul@ti.com>
[rewrite commit message, fix indentation]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Previously, NL80211_MESHCONF_HT_OPMODE validation rejected correct
flag combinations, e.g. IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED |
IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT.

Doing just a range-check allows setting flags that don't exist (0x8)
and invalid flag combinations.

Implements some checks based on IEEE 802.11 2012 8.4.2.59 "HT
Operation element".
Signed-off-by: NMasashi Honma <masashi.honma@gmail.com>
[reword commit message, simplify a bit]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If QoS frame with EOSP (end of service period) subfield=1 sent by local
peer was not acked by remote peer, local peer did not end the MPSP. This
prevents local peer from going to DOZE state. And if the remote peer
goes away without closing connection, local peer continues AWAKE state
and wastes battery.
Signed-off-by: NMasashi Honma <masashi.honma@gmail.com>
Acked-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The code currently assumes that buffered multicast PS frames don't have
a pending ACK frame for tx status reporting.
However, hostapd sends a broadcast deauth frame on teardown for which tx
status is requested. This can lead to the "Have pending ack frames"
warning on module reload.
Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue.

Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some drivers (e.g. wl18xx) expect that the last stage in the
de-initialization process will be stopping the beacons, similar to AP flow.
Update ieee80211_stop_mesh() flow accordingly.
As peers can be removed dynamically, this would not impact other drivers.

Tested also on Ralink RT3572 chipset.
Signed-off-by: NMaital Hahn <maitalm@ti.com>
Signed-off-by: NYaniv Machani <yanivma@ti.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The logic was inverted here, set the bit if frames are pending.

Fixes: ba8c3d6f ("mac80211: add an intermediate software queue implementation")
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The switch on chandef->width is missing a break on the
NL8211_CHAN_WIDTH_80P80 case; currently we get a WARN_ON when
center_freq2 is non-zero because of the missing break.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There are KSZ8721 PHYs with phy_id 0x00221619. In order to detect them
as PHY_ID_KSZ8001 compatible while staying different to PHY_ID_KSZ9021
ignore the last two bits when matching PHY_ID
Signed-off-by: NAlexander Stein <alexanders83@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Chunhao Lin says:

====================
r8169: fix 3 runtime pm related issues.

v2:
use "struct device *d = &tp->pci_dev->dev" instead of "struct pci_dev *pdev = tp->pci_dev"

v1:
This series of patches fix 3 runtime pm related issues that are listed below.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When there is no AC power, NIC may not work after changing mac address.
Please refer to following link.
http://www.spinics.net/lists/netdev/msg356572.html

This issue is caused by runtime power management. When there is no AC
power, if we put NIC down (ifconfig down), the driver will be in runtime
suspend state and hardware will be put into D3 state. During this time,
driver cannot access hardware regisers. So if you set new mac address
during this time, it will not be set to hardware. After resume, NIC will
keep using the old mac address and the network will not work normally.

In this patch I add detecting runtime pm status when setting mac address.
If driver is in runtime suspend state, it will skip setting mac address, keep
the new mac address, and set the new mac address during runtime resume.
Signed-off-by: NChunhao Lin <hau@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not to call rtl8169_update_counters() to dump tally counter when driver
is in runtime suspend state.

Calling rtl8169_update_counters() in runtime suspend state will produce
warning message "rtl_counters_cond == 1 (loop: 1000, delay: 10)".
Signed-off-by: NChunhao Lin <hau@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NIC will be put into D3 state during runtime suspend state. When set or
get hardware wol setting, driver will write or read hardware registers.
If we set or get hardware wol setting in runtime suspend state, because
NIC will in D3 state, the hardware registers read by driver will return all
0xff. That will let driver thinking register flag is not toggled and
then prints the warning message "rtl_counters_cond == 1 (loop: 1000,
delay: 10)" to kernel log.

For fixing this issue, add checking driver's pm runtime status in
rtl8169_get_wol() and rtl8169_set_wol().
Signed-off-by: NChunhao Lin <hau@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case we cannot complete bcm_sf2_sw_setup() for any reason, and we
go to the out_unmap label, but the MDIO bus has not been registered yet,
we will hit the BUG condition in drivers/net/phy/mdio_bus.c about the
bus not being registered. Fix this by dedicating a specific lable for
when we fail after the MDIO bus has been successfully registered.

Fixes: 461cd1b0 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

trivial fix to spelling mistake in printk message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 141ddefc ("sctp: change sk state to CLOSED instead of
CLOSING in sctp_sock_migrate") changed sk state to CLOSED if the
assoc is closed when sctp_accept clones a new sk.

If there is still data in sk receive queue, users will not be able
to read it any more, as sctp_recvmsg returns directly if sk state
is CLOSED.

This patch is to add CLOSED state check in sctp_recvmsg to allow
reading data from TCP-style sk with CLOSED state as what TCP does.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prior to this patch, once sctp received SHUTDOWN or shutdown with RD,
sk->sk_shutdown would be set with RCV_SHUTDOWN, and all events would
be dropped in sctp_ulpq_tail_event(). It would cause:

1. some notifications couldn't be received by users. like
   SCTP_SHUTDOWN_COMP generated by sctp_sf_do_4_C().

2. sctp would also never trigger sk_data_ready when the association
   was closed, making it harder to identify the end of the association
   by calling recvmsg() and getting an EOF. It was not convenient for
   kernel users.

The check here should be stopping delivering DATA chunks after receiving
SHUTDOWN, and stopping delivering ANY chunks after sctp_close().

So this patch is to allow notifications to enqueue into receive queue
even if sk->sk_shutdown is set to RCV_SHUTDOWN in sctp_ulpq_tail_event,
but if sk->sk_shutdown == RCV_SHUTDOWN | SEND_SHUTDOWN, it drops all
events.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp needs to queue auth chunk back when we know that we are going
to generate another segment. But commit f1533cce ("sctp: fix
panic when sending auth chunks") requeues the last chunk processed
which is probably not the auth chunk.

It causes panic when calculating the MAC in sctp_auth_calculate_hmac(),
as the incorrect offset of the auth chunk in skb->data.

This fix is to requeue it by using packet->auth.

Fixes: f1533cce ("sctp: fix panic when sending auth chunks")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_select_initial_window() intends to advertise a window
scaling for the maximum possible window size. To do so,
it considers the maximum of net.ipv4.tcp_rmem[2] and
net.core.rmem_max as the only possible upper-bounds.
However, users with CAP_NET_ADMIN can use SO_RCVBUFFORCE
to set the socket's receive buffer size to values
larger than net.ipv4.tcp_rmem[2] and net.core.rmem_max.
Thus, SO_RCVBUFFORCE is effectively ignored by
tcp_select_initial_window().

To fix this, consider the maximum of net.ipv4.tcp_rmem[2],
net.core.rmem_max and socket's initial buffer space.

Fixes: b0573dea ("[NET]: Introduce SO_{SND,RCV}BUFFORCE socket options")
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Suggested-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sabrina Dubroca says:

====================
macsec: reference counting fixes

Patch 1 adds explicit reference counting on RXSCs, instead of the
current implicit reference counting using the RXSA's refcount.

Patch 2 fixes possible kernel panics during module unload caused by an
RCU callback that schedules another RCU callback, which the
rcu_barrier() added in b196c22a ("macsec: add rcu_barrier() on
module exit") didn't protect against.

Patch 3 fixes a refcounting issue with the underlying device for a
macsec device when link creation fails.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When creation of a macsec device fails because an identical device
already exists on this link, the current code decrements the refcnt on
the parent link (in ->destructor for the macsec device), but it had not
been incremented yet.

Move the dev_hold(parent_link) call earlier during macsec device
creation.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Following the previous patch, RXSCs are held and properly refcounted in
the RX path (instead of being implicitly held by their SA), so the SA
doesn't need to hold a reference on its parent RXSC.

This also avoids panics on module unload caused by the double layer of
RCU callbacks (call_rcu frees the RXSA, which puts the final reference
on the RXSC and allows to free it in its own call_rcu) that commit
b196c22a ("macsec: add rcu_barrier() on module exit") didn't
protect against.
There were also some refcounting bugs in macsec_add_rxsa where I didn't
put the reference on the RXSC on the error paths, which would lead to
memory leaks.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, we lookup the RXSC without taking a reference on it.  The
RXSA holds a reference on the RXSC, but the SA and SC could still both
disappear before we take a reference on the SA.

Take a reference on the RXSC in macsec_handle_frame.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Grygorii Strashko says:

====================
drivers: net: cpsw: fix driver loading/unloading

This series fixes set of isssues observed when CPSW driver module is unloaded/loaded:
1) rmmod: deadlock in cpdma_ctlr_destroy
2) rmmod: L3 back-trace and crash if all net interfaces are down, because CPSW
can be powerred down by PM runtime in this case.
3) insmod: mdio device is not recreated on next insmod
 - need to use of_platform_depopulate() in cpsw_remove().
4) rmmod: system crash on omap_device removal

Tested on: am437x-idk, am57xx-beagle-x15

Changes in v2:
- build warning fixed
- added fix for correct omap_device removal

Link on v1:
 https://lkml.org/lkml/2016/7/22/240
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Below call chain causes system crash when OMAP device is
removed by calling of_platform_depopulate()/device_del():

device_del()
- blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
 			     BUS_NOTIFY_DEL_DEVICE, dev);
  - _omap_device_notifier_call()
    - omap_device_delete()
      - od->pdev->archdata.od = NULL;
	kfree(od->hwmods);
	kfree(od);
  - bus_remove_device()
    - device_release_driver()
      - __device_release_driver()
	- pm_runtime_get_sync()
	   - _od_runtime_resume()
	     - omap_hwmod_enable() <- OOPS od's delted already

Backtrace:
Unable to handle kernel NULL pointer dereference at virtual address 0000000d
pgd = eb100000
[0000000d] *pgd=ad6e1831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
CPU: 1 PID: 1273 Comm: modprobe Not tainted 4.4.15-rt19-00115-ge4d3cd3-dirty #68
Hardware name: Generic DRA74X (Flattened Device Tree)
task: eb1ee800 ti: ec962000 task.ti: ec962000
PC is at omap_device_enable+0x10/0x90
LR is at _od_runtime_resume+0x10/0x24
[...]
[<c00299dc>] (omap_device_enable) from [<c0029a6c>] (_od_runtime_resume+0x10/0x24)
[<c0029a6c>] (_od_runtime_resume) from [<c04ad404>] (__rpm_callback+0x20/0x34)
[<c04ad404>] (__rpm_callback) from [<c04ad438>] (rpm_callback+0x20/0x80)
[<c04ad438>] (rpm_callback) from [<c04aee28>] (rpm_resume+0x48c/0x964)
[<c04aee28>] (rpm_resume) from [<c04af360>] (__pm_runtime_resume+0x60/0x88)
[<c04af360>] (__pm_runtime_resume) from [<c04a4974>] (__device_release_driver+0x30/0x100)
[<c04a4974>] (__device_release_driver) from [<c04a4a60>] (device_release_driver+0x1c/0x28)
[<c04a4a60>] (device_release_driver) from [<c04a38c0>] (bus_remove_device+0xec/0x144)
[<c04a38c0>] (bus_remove_device) from [<c04a0764>] (device_del+0x10c/0x210)
[<c04a0764>] (device_del) from [<c04a67b0>] (platform_device_del+0x18/0x84)
[<c04a67b0>] (platform_device_del) from [<c04a6828>] (platform_device_unregister+0xc/0x20)
[<c04a6828>] (platform_device_unregister) from [<c05adcfc>] (of_platform_device_destroy+0x8c/0x90)
[<c05adcfc>] (of_platform_device_destroy) from [<c04a02f0>] (device_for_each_child+0x4c/0x78)
[<c04a02f0>] (device_for_each_child) from [<c05adc5c>] (of_platform_depopulate+0x30/0x44)
[<c05adc5c>] (of_platform_depopulate) from [<bf123920>] (cpsw_remove+0x68/0xf4 [ti_cpsw])
[<bf123920>] (cpsw_remove [ti_cpsw]) from [<c04a68d8>] (platform_drv_remove+0x24/0x3c)
[<c04a68d8>] (platform_drv_remove) from [<c04a49c8>] (__device_release_driver+0x84/0x100)
[<c04a49c8>] (__device_release_driver) from [<c04a4b20>] (driver_detach+0xac/0xb0)
[<c04a4b20>] (driver_detach) from [<c04a3be8>] (bus_remove_driver+0x60/0xd4)
[<c04a3be8>] (bus_remove_driver) from [<c00d9870>] (SyS_delete_module+0x184/0x20c)
[<c00d9870>] (SyS_delete_module) from [<c0010540>] (ret_fast_syscall+0x0/0x1c)
Code: e3500000 e92d4070 1590630c 01a06000 (e5d6300d)

Hence, fix it by using BUS_NOTIFY_REMOVED_DEVICE event for OMAP device
deletion which is sent when DD has finished processing of device
deletion.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use of_platform_depopulate() in cpsw_remove() instead of
of_device_unregister(), because CSPW child devices will not be
recreated otherwise on next insmod. of_platform_depopulate() is
correct way now as it will ensure that all steps done in
of_platform_populate() are reverted, including cleaning up of
OF_POPULATED flag.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The L3 error will be generated and system will crash during unloading
of CPSW driver if CPSW is used as module and ethX devices are down.
This happens because CPSW can be power off by PM runtime now when ethX
devices are down.

Hence, ensure that CPSW powered up by PM runtime before performing any
deinitialization actions which require CPSW registers access. In case
of PM runtime error just leave cpsw_remove() as we can't do anything
anymore.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix deadlock in cpdma_ctlr_destroy() which is triggered now on
cpsw module removal:
 cpsw_remove()
 - cpdma_ctlr_destroy()
   - spin_lock_irqsave(&ctlr->lock, flags)
   - cpdma_ctlr_stop()
     - spin_lock_irqsave(&ctlr->lock, flags);
   - cpdma_chan_destroy()
     - spin_lock_irqsave(&ctlr->lock, flags);

The issue has not been observed before because CPDMA channels have
been destroyed manually by CPSW until commit d941ebe8 ("net:
ethernet: ti: cpsw: use destroy ctlr to destroy channels") was merged.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using list_move() instead of list_del() + list_add().
Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 637d3e99 ("cxgb4: Discard the packet if the length is
greater than mtu") introduced a regression in the VLAN interface
performance when Tx VLAN offload is disabled.

Check if skb is tagged, regardless of whether it is hardware accelerated
or not. Presently we were checking only for hardware acclereated one,
which caused performance to drop to ~0.17Mbps on a 10GbE adapter for
VLAN interface, when tx vlan offload is turned off using ethtool.
The ethernet head length calculation was going wrong in this case, and
driver ended up dropping packets.

Fixes: 637d3e99 ("cxgb4: Discard the packet if the length is greater than mtu")
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com>
Acked-By: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the error handling case of nla_nest_start() failed read_unlock_bh()
is called  to unlock a lock that had not been taken yet. sparse warns
about the context imbalance as the following:

net/tipc/monitor.c:799:23: warning:
 context imbalance in '__tipc_nl_add_monitor' - different lock contexts for basic block

Fixes: cf6f7e1d ('tipc: dump monitor attributes')
Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
qed*: Small fixes series

This contains several small [and straight-forward] fixes to qed*
drivers.

Please consider applying this to `net'.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each PF/VF has a limited number of vlan filters for
configuration purposes; This information is passed to qede
and is used to prevent over-usage - once a vlan is to be
configured and no filter credit is available, the driver
would switch into working in vlan-promisc mode.

Problem is the credit pool is shared by both PFs and VFs,
and currently PFs aren't deducting the filters that are
reserved for their VFs from their quota, which may lead
to some vlan filters failing unknowingly due to lack of credit.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver uses reverse logic when checking if minimum
bandwidth configuration applied, causing it to
configure the guarantee only on the first hw-function.

Fixes: a0d26d5a ("qed*: Don't reset statistics on inner reload")
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding the necessary logic to prevet statistics reset
on inner-reload introduced a bug, and now statistics
are reset only when re-probing the driver.

Fixes: a0d26d5a ("qed*: Don't reset statistics on inner reload")
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before requesting the firmware to start Rx queues,
driver goes and sets the queue producer in the device to 0.
But while the producer is 32-bit, the driver currently clears 64 bits,
effectively zeroing an additional CID's producer as well.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver has reverse logic for checking the result of the
spoof-checking configuration. As a result, it would log that
the configuration failed [even though it succeeded], and will
no longer do anything when requested to remove the configuration,
as it's accounting of the feature will be incorrect.

Fixes: 6ddc7608 ("qed*: IOV support spoof-checking")
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As part of ndo_vlan_rx_kill_vid() implementation,
qede is requesting firmware to remove the vlan filter.
This currently happens even if the vlan wasn't previously
added [In case device ran out of vlan credits].

For PFs this doesn't cause any issues as the firmware
would simply ignore the removal request. But for VFs their
parent PF is holding an accounting of the configured vlans,
and such a request would cause the PF to fail the VF's
removal request.

Simply fix this for both PFs & VFs and don't remove filters
that were not previously added.

Fixes: 7c1bfcad ("qede: Add vlan filtering offload support")
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>