- 26 4月, 2007 14 次提交
-
-
由 Patrick McHardy 提交于
Don't reinitialize the callback mutex the netlink_kernel_create caller handed in, it is supposed to already be initialized and could already be held by someone. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Switch cb_lock to mutex and allow netlink kernel users to override it with a subsystem specific mutex for consistent locking in dump callbacks. All netlink_dump_start users have been audited not to rely on any side-effects of the previously used spinlock. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This patch introduces a new NLA_BINARY attribute policy type with the verification of simply checking the maximum length of the payload. It also fixes a small typo in the example. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Now that all users of netlink_dump_start() use netlink_run_queue() to process the receive queue, it is possible to return -EINTR from netlink_dump_start() directly, therefore simplying the callers. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The error pointer argument in netlink message handlers is used to signal the special case where processing has to be interrupted because a dump was started but no error happened. Instead it is simpler and more clear to return -EINTR and have netlink_run_queue() deal with getting the queue right. nfnetlink passed on this error pointer to its subsystem handlers but only uses it to signal the start of a netlink dump. Therefore it can be removed there as well. This patch also cleans up the error handling in the affected message handlers to be consistent since it had to be touched anyway. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Changes netlink_rcv_skb() to skip netlink controll messages and don't pass them on to the message handler. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
netlink_rcv_skb() is changed to skip messages which don't have the NLM_F_REQUEST bit to avoid every netlink family having to perform this check on their own. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Leftover from dynamic multicast groups allocation work. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common "(struct nlmsghdr *)skb->data" sequence, so that we reduce the number of direct accesses to skb->data and for consistency with all the other cast skb member helpers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can later turn skb->h.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple cases: skb->h.raw = skb->data; skb->h.raw = {skb_push|[__]skb_pull}() The next ones will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch removes the following not or no longer used exports: - drivers/char/random.c: secure_tcp_sequence_number - net/dccp/options.c: sysctl_dccp_feat_sequence_window - net/netlink/af_netlink.c: netlink_set_err Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
If the user passes MSG_TRUNC in via msg_flags, return the full packet size not the truncated size. Idea from Herbert Xu and Thomas Graf. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 4月, 2007 1 次提交
-
-
由 Denis Lunev 提交于
There is a race between netlink_dump_start() and netlink_release() that can lead to the situation when a netlink socket with non-zero callback is freed. Here it is: CPU1: CPU2 netlink_release(): netlink_dump_start(): sk = netlink_lookup(); /* OK */ netlink_remove(); spin_lock(&nlk->cb_lock); if (nlk->cb) { /* false */ ... } spin_unlock(&nlk->cb_lock); spin_lock(&nlk->cb_lock); if (nlk->cb) { /* false */ ... } nlk->cb = cb; spin_unlock(&nlk->cb_lock); ... sock_orphan(sk); /* * proceed with releasing * the socket */ The proposal it to make sock_orphan before detaching the callback in netlink_release() and to check for the sock to be SOCK_DEAD in netlink_dump_start() before setting a new callback. Signed-off-by: NDenis Lunev <den@openvz.org> Signed-off-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2007 1 次提交
-
-
由 Mariusz Kozlowski 提交于
This patch removes redundant argument check for module_put(). Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2006 1 次提交
-
-
由 Josef Sipek 提交于
Signed-off-by: NJosef Sipek <jsipek@fsl.cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 12月, 2006 2 次提交
-
-
由 Jamal Hadi Salim 提交于
The command flags for dump and do were swapped.. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
This patch moves command capabilities to command flags. Other than being cleaner, saves several bytes. We increment the nlctrl version so as to signal to user space that to not expect the attributes. We will try to be careful not to do this too often ;-> Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2006 6 次提交
-
-
由 Jamal Hadi Salim 提交于
Remove assumption that generic netlink commands cannot have dump completion callbacks. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The destination PID is passed directly to netlink_unicast() respectively netlink_multicast(). Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Based on Jamal's patch but compiled and even tested. :-) Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
By modyfing genlmsg_put() to take a genl_family and by adding genlmsg_put_reply() the process of constructing the netlink and generic netlink headers is simplified. Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
A generic netlink user has no interest in knowing how to address the source of the original request. Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 10月, 2006 1 次提交
-
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 7 次提交
-
-
由 Thomas Graf 提交于
Additionaly exports the following information when providing the list of registered generic netlink families: - protocol version - header size - maximum number of attributes - list of available operations including - id - flags - avaiability of policy and doit/dumpit function libnl HEAD provides a utility to read this new information: 0x0010 nlctrl version 1 hdrsize 0 maxattr 6 op GETFAMILY (0x03) [POLICY,DOIT,DUMPIT] 0x0011 NLBL_MGMT version 1 hdrsize 0 maxattr 0 op unknown (0x02) [DOIT] op unknown (0x03) [DOIT] .... Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Converts existing NLA_STRING attributes to use the new validation features, saving a couple of temporary buffers. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Introduces a new attribute type NLA_NUL_STRING to support NUL terminated strings. Attributes of this kind require to carry a terminating NUL within the maximum specified in the policy. The `old' NLA_STRING which is not required to be NUL terminated is extended to provide means to specify a maximum length of the string. Aims at easing the pain with using nla_strlcpy() on temporary buffers. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Adds nlmsg_notify() implementing proper notification logic. The message is multicasted to all listeners in the group. The applications the requests orignates from can request a unicast back report in which case said socket will be excluded from the multicast to avoid duplicated notifications. nlmsg_multicast() is extended to take allocation flags to allow notification in atomic contexts. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Fixes a theoretical memory and locking leak when the size of the netlink header would exceed the skb tailroom. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Adds: nlmsg_get_pos() return current position in message nlmsg_trim() trim part of message nla_reserve_nohdr(skb, len) reserve room for an attribute w/o hdr nla_put_nohdr(skb, len, data) add attribute w/o hdr nla_find_nested() find attribute in nested attributes Fixes nlmsg_new() to take allocation flags and consider size. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2006 1 次提交
-
-
由 Akinobu Mita 提交于
This patch makes crash happen if initialization of nl_table fails in initcalls. It is better than getting use after free crash later. Signed-off-by: NAkinobu Mita <mita@miraclelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2006 1 次提交
-
-
由 Panagiotis Issaris 提交于
Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
reported by Jure Repinc: > > http://bugzilla.kernel.org/show_bug.cgi?id=6773 > > checked out dmesg output and found the message > > > > ====================================================== > > [ BUG: hard-safe -> hard-unsafe lock order detected! ] > > ------------------------------------------------------ > > > > starting at line 660 of the dmesg.txt that I will attach. The patch below should fix the deadlock, albeit I suspect it's not the "right" fix; the right fix may well be to move the rx processing in bcm43xx to softirq context. [it's debatable, ipw2200 hit this exact same bug; at some point it's better to bite the bullet and move this to the common layer as my patch below does] Make the nl_table_lock irq-safe; it's taken for read in various netlink functions, including functions that several wireless drivers (ipw2200, bcm43xx) want to call from hardirq context. The deadlock was found by the lock validator. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Cc: Michael Buesch <mb@bu3sch.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: N"David S. Miller" <davem@davemloft.net> Cc: jamal <hadi@cyberus.ca> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 30 6月, 2006 1 次提交
-
-
由 Darrel Goeddel 提交于
This patch encapsulates the usage of eff_cap (in netlink_skb_params) within the security framework by extending security_netlink_recv to include a required capability parameter and converting all direct usage of eff_caps outside of the lsm modules to use the interface. It also updates the SELinux implementation of the security_netlink_send and security_netlink_recv hooks to take advantage of the sid in the netlink_skb_params struct. This also enables SELinux to perform auditing of netlink capability checks. Please apply, for 2.6.18 if possible. Signed-off-by: NDarrel Goeddel <dgoeddel@trustedcs.com> Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-