- 24 8月, 2006 7 次提交
-
-
由 Jeff Garzik 提交于
-
由 Tejun Heo 提交于
vt6420 has super-fragile SCR registers which can hang the whole machine if accessed with the wrong timings. This patch makes sata_via use SCR registers only during probing and with the same timings as before (pre new EH), which is proven to work. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
This patch implements force_pcs module parameter for ata_piix. If 1, PCS is ignored, 2 honored. As there seem to be quite a few ICHs w/ impaired PCS, this option will be useful for cases where the default setting doesn't work. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
There have been a number of reports regarding some ICH5s failing to detect devices since the PCS handling update. Analysis shows that these problems are caused by bogus PCS values from those controllers. Before the PCS update, the driver didn't honor PCS regs exactly and probed them in many cases PCS reports no device. Now that PCS is honored exactly, these hardware problems are visible. This patch makes ICH5 ignore PCS. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
-
由 Alexey Dobriyan 提交于
Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Cliburn 提交于
This patch adds support for the VIA Technologies VT8237A SATA controller, used, for example, on the ASUS M2V socket AM2 motherboard. Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 22 8月, 2006 3 次提交
-
-
由 Henrik Kretzschmar 提交于
Since libata moved from /drivers/scsi to /drivers/ata this template is broken. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NAlan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Conflicts: drivers/ata/ata_piix.c
-
由 Tejun Heo 提交于
Move out PCS handling from piix_sata_prereset() into piix_sata_present_mask() and use it from newly implemented piix_sata_softreset(). Class codes for devices which are indicated to be absent by PCS are cleared to ATA_DEV_NONE. This fixes ghost device problem reported on ICH6 and 7. This patch moves PCS handling from prereset to softreset, which makes two behavior changes. * perform softreset even when PCS indicates no device * PCS handling is repeated before retrying softresets due to reset failures. Both behavior changes are intended and more consistent with how other drivers behave. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 20 8月, 2006 3 次提交
-
-
由 Tejun Heo 提交于
drivers/pci/quirks.c was not updated when libata config constants were renamed braking several libata quirks. Fix it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
-
由 Jeff Garzik 提交于
-
- 19 8月, 2006 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 18 8月, 2006 22 次提交
-
-
由 Herbert Xu 提交于
When the bridge recomputes features, it does not maintain the constraint that SG/GSO must be off if TX checksum is off. This patch adds that constraint. On a completely unrelated note, I've also added TSO6 and TSO_ECN feature bits if GSO is enabled on the underlying device through the new NETIF_F_GSO_SOFTWARE macro. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
table->private might change because of ruleset changes, don't use it without holding the lock. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
ip_conntrack_put must not be called while holding ip_conntrack_lock since destroy_conntrack takes it again. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Loeliger 提交于
Add 'linux,phandle' entry to i8259@4d0 node. Signed-off-by: NZhang Wei <wei.zhang@freescale.com> Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Also fix 80-column run-over. Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
As per list discussion, let's add device tree source files under powerpc/boot/dts. If nothing else, it is a starting point. Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Also accept "local-mac-address". However the old "address" is now obsolete, but accepted for backwards compatibility. It should be removed after all device trees have been converted to use "mac-address". Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Alexey Kuznetsov 提交于
Found in 2.4 by Yixin Pan <yxpan@hotmail.com>. > When I read fib_semantics.c of Linux-2.4.32, write_lock(&fib_info_lock) = > is used in fib_release_info() instead of write_lock_bh(&fib_info_lock). = > Is the following case possible: a BH interrupts fib_release_info() while = > holding the write lock, and calls ip_check_fib_default() which calls = > read_lock(&fib_info_lock), and spin forever. Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David L Stevens 提交于
This fixes source filter leakage when a device is removed and a process leaves the group thereafter. This also includes corresponding fixes for IPv6 multicast source filters on device removal. Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It causes way too much trouble and confusion in userspace. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Panagiotis Issaris 提交于
The PPP code contains two kmalloc()s followed by memset()s without handling a possible memory allocation failure. (Suggested by Joe Perches). And furthermore, conversions from kmalloc+memset to kzalloc. [akpm@osdl.org: fix error-path leak] [akpm@osdl.org: cleanups] [paulus@samba.org: don't add useless printk and cardmap_destroy calls] Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Hildebrandt 提交于
Signed-off-by: NRalf Hildebrandt <Ralf.Hildebrandt@charite.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kevin Hilman 提交于
atm_proc_exit() is declared as __exit, and thus in .exit.text. On some architectures (ARM) .exit.text is discarded at compile time, and since atm_proc_exit() is called by some other __init functions, it results in a link error. Signed-off-by: NKevin Hilman <khilman@mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Convert dev_alloc_skb() to netdev_alloc_skb() and increase default rx ring size to 255. The old ring size of 100 was too small. Update version to 1.4.44. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int() similar to the one in tg3 discovered by Herbert Xu: CPU0 CPU1 bnx2_start_xmit() if (tx_ring_full) { tx_lock bnx2_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in bnx2_tx_int() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made, very much identical to the tg3 fix: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in bnx2_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling netif_wake_queue(). 4. Add memory barrier to bnx2_tx_avail(). 5. Add bp->tx_wake_thresh which is set to half the tx ring size. 6. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan "Yenya" Kasprzak 提交于
this minor patch fixes the description of net.ipv4.tcp_mem sysctl in ip-sysctl.txt - the headline names the values "min, pressure, max", while the description uses the "low, pressure, high" values. Both tcp_rmem and tcp_wmem descriptions use the "min, pressure, max" values, so I have changed the tcp_mem to match this and not vice versa. Signed-off-by: NJan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Ruzicka 提交于
There is a leak of a socket's multicast source filter list structure on closing a socket with a multicast source filter set on an interface that does not exist any more. Signed-off-by: NMichal Ruzicka <michal.ruzicka@comstar.cz> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ingo Molnar 提交于
Split off __icmpv6_socket's sk->sk_dst_lock class, because it gets used from softirqs, which is safe for __icmpv6_sockets (because they never get directly used via userspace syscalls), but unsafe for normal sockets. Has no effect on non-lockdep kernels. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
It needs netfilter_bridge.h for brnf_deferred_hooks Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Suresh Siddha 提交于
On High end systems (1024 or so cpus) this can potentially cause stack overflow. Fix the stack usage. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Since __vlan_hwaccel_rx() is essentially bypassing the netif_receive_skb() call that would have occurred if we did the VLAN decapsulation in software, we are missing the skb_bond() call and the assosciated checks it does. Export those checks via an inline function, skb_bond_should_drop(), and use this in __vlan_hwaccel_rx(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olof Johansson 提交于
Clear HID0[en_attn] at CPU init time on PPC970. Closes CVE-2006-4093. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 17 8月, 2006 3 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The code for using the radix tree for reverse mapping of interrupts has a typo that causes it to create incorrect mappings if the software and hardware numbers happen to be different. This would, among others, cause the IDE interrupt to fail on js20's. This fixes it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- On archs that have no-exec support, we vmalloc() a executable scratch area of PAGE_SIZE and divide it up into an array of slots of maximum instruction size for that arch - On a kprobe registration, the original instruction is copied to the first available free slot, so if multiple kprobes are registered, chances are, they get contiguous slots - On POWER4, due to not having coherent icaches, we could hit a situation where a probe that is registered on one processor, is hit immediately on another. This second processor could have fetched the stream of text from the out-of-line single-stepping area *before* the probe registration completed, possibly due to an earlier (and a different) kprobe hit and hence would see stale data at the slot. Executing such an arbitrary instruction lead to a problem as reported in LTC bugzilla 23555. The correct solution is to call flush_icache_range() as soon as the instruction is copied for out-of-line single-stepping, so the correct instruction is seen on all processors. Thanks to Will Schmidt who tracked this down. Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
To compile kexec on 32-bit we need a few more bits and pieces. Rather than add empty definitions, we can make crash.c work on 32-bit, with only a couple of kludges. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-