- 23 3月, 2006 3 次提交
-
-
由 Chuck Ebbert 提交于
When vendor-specific i386 initialization code is unavailable the kernel falls back to a default CPU model name. Make that model name reflect the CPU family instead of an internal vendor index. Tested on Pentium II (family 6 model 5). /proc/cpuinfo before: model name : ff/05 after: model name : 06/05 Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Acked-by: N"Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
Allow the x86 "sep" feature to be disabled at bootup. This forces use of the int80 vsyscall. Mainly for testing or benchmarking the int80 vsyscall code. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
Several places in arch/i386/kernel/cpu and kernel/cpu were using __devinit when they should have been __cpuinit. Fixing that saves ~4K when CONFIG_HOTPLUG && !CONFIG_HOTPLUG_CPU. Noticed by Andrew Morton. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 3月, 2006 1 次提交
-
-
由 Shaohua Li 提交于
The x86_model calculation also applies for family 6. early_cpu_detect does the right thing, but generic_identify misses. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: "Seth, Rohit" <rohit.seth@intel.com> Acked-by: NAndi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 2月, 2006 1 次提交
-
-
由 James Bottomley 提交于
Recent GDT changes broke the SMP boot sequence if the booting CPU is numbered anything other than zero. There's also a subtle source of error in that the boot time CPU now uses cpu_gdt_table (which is actually the GDT for booting CPUs in head.S). This patch fixes both problems by making GDT descriptors themselves allocated from a per_cpu area and switching to them in cpu_init(), which now means that cpu_gdt_table is exclusively used for booting CPUs again. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Matt Tolentino <metolent@snoqualmie.dp.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 2月, 2006 1 次提交
-
-
由 Chuck Ebbert 提交于
i386 CPU init code accesses freed init memory when booting a newly-started processor after CPU hotplug. The cpu_devs array is searched to find the vendor and it contains pointers to freed data. Fix that by: 1. Zeroing entries for freed vendor data after bootup. 2. Changing Transmeta, NSC and UMC to all __init[data]. 3. Printing a warning (once only) and setting this_cpu to a safe default when the vendor is not found. This does not change behavior for AMD systems. They were broken already but no error was reported. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
early_cpu_detect only runs on the BP, but this code needs to run on all CPUs. Looks like a mismerge somewhere. Also add a warning comment. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 1月, 2006 1 次提交
-
-
由 Matt Mackall 提交于
This adds configurable support for doublefault reporting on x86 add/remove: 0/3 grow/shrink: 0/1 up/down: 0/-13048 (-13048) function old new delta cpu_init 846 786 -60 doublefault_fn 188 - -188 doublefault_stack 4096 - -4096 doublefault_tss 8704 - -8704 Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 1月, 2006 2 次提交
-
-
由 Zachary Amsden 提交于
Stop deleting NT bit from EFLAGS. See arch/i386/kernel/head.S line 223, which does something even better. Signed-off-by: NZachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zachary Amsden 提交于
Make GDT page aligned and page padded to support running inside of a hypervisor. This prevents false sharing of the GDT page with other hot data, which is not allowed in Xen, and causes performance problems in VMware. Rather than go back to the old method of statically allocating the GDT (which wastes unneded space for non-present CPUs), the GDT for APs is allocated dynamically. Signed-off-by: NZachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 11月, 2005 2 次提交
-
-
由 Siddha, Suresh B 提交于
Fields obtained through cpuid vector 0x1(ebx[16:23]) and vector 0x4(eax[14:25], eax[26:31]) indicate the maximum values and might not always be the same as what is available and what OS sees. So make sure "siblings" and "cpu cores" values in /proc/cpuinfo reflect the values as seen by OS instead of what cpuid instruction says. This will also fix the buggy BIOS cases (for example where cpuid on a single core cpu says there are "2" siblings, even when HT is disabled in the BIOS. http://bugzilla.kernel.org/show_bug.cgi?id=4359) Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Suresh Siddha 提交于
According to cpuid instruction in IA32 SDM-Vol2, when computing cpu model, we need to consider extended model ID for family 0x6 also. AK: Also added fixes/simplifcation from Petr Vandrovec Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 11月, 2005 1 次提交
-
-
由 Shaohua Li 提交于
It's widely seen a MCE non-fatal error reported after resume. It seems MCE resume is lacked under ia32. This patch tries to fix the gap. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 10月, 2005 2 次提交
-
-
由 Zachary Amsden 提交于
Add an accessor function for getting the per-CPU gdt. Callee must already have the CPU. Signed-off-by: NZachary Amsden <zach@vmware.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zachary Amsden 提交于
The per-CPU initialization code is copying in bogus data into thread->tls_array. Note that it copies &per_cpu(cpu_gdt_table, cpu), not &per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TLS_MIN). That is totally broken and unnecessary. Make the initialization explicitly NULL. Signed-off-by: NZachary Amsden <zach@vmware.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 9月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
get_cpu_vendor() no longer has any users in other files. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 9月, 2005 2 次提交
-
-
由 Zachary Amsden 提交于
i386 inline assembler cleanup. This change encapsulates descriptor and task register management. Also, it is possible to improve assembler generation in two cases; savesegment may store the value in a register instead of a memory location, which allows GCC to optimize stack variables into registers, and MOV MEM, SEG is always a 16-bit write to memory, making the casting in math-emu unnecessary. Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zachary Amsden 提交于
i386 Inline asm cleanup. Use cr/dr accessor functions. Also, a potential bugfix. Also, some CR accessors really should be volatile. Reads from CR0 (numeric state may change in an exception handler), writes to CR4 (flipping CR4.TSD) and reads from CR2 (page fault) prevent instruction re-ordering. I did not add memory clobber to CR3 / CR4 / CR0 updates, as it was not there to begin with, and in no case should kernel memory be clobbered, except when doing a TLB flush, which already has memory clobber. I noticed that page invalidation does not have a memory clobber. I can't find a bug as a result, but there is definitely a potential for a bug here: #define __flush_tlb_single(addr) \ __asm__ __volatile__("invlpg %0": :"m" (*(char *) addr)) Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 7月, 2005 1 次提交
-
-
由 Shaohua Li 提交于
There has been some discuss about solving the SMP MTRR suspend/resume breakage, but I didn't find a patch for it. This is an intent for it. The basic idea is moving mtrr initializing into cpu_identify for all APs (so it works for cpu hotplug). For BP, restore_processor_state is responsible for restoring MTRR. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Acked-by: NAndi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2005 3 次提交
-
-
由 Li Shaohua 提交于
Clean CPU states in order to reuse smp boot code for CPU hotplug. Signed-off-by: Li Shaohua<shaohua.li@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Li Shaohua 提交于
Trival patch for CPU hotplug. In CPU identify part, only did cleaup for intel CPUs. Need do for other CPUs if they support S3 SMP. Signed-off-by: Li Shaohua<shaohua.li@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Li Shaohua 提交于
Make SEP init per-cpu, so it is hotplug safe. Signed-off-by: Li Shaohua<shaohua.li@intel.com> Signed-off-by: NAshok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 1 次提交
-
-
由 Vincent Hanquez 提交于
Make use of the 2 new macro set_debugreg and get_debugreg. Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 5月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
- Remove duplicated ifdef - Make core_id match what Intel uses - Initialize phys_proc_id correctly for non DC case - Handle non power of two core numbers. Fixes for both i386 and x86-64 Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 5月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
Last round hopefully of cpu_core_id changes hopefully fow now: - Always initialize cpu_core_id for all CPUs, even when no dual core setup is detected. This prevents funny /proc/cpuinfo output - Do the same with phys_proc_id[] even when no HyperThreading - dito. - Use the CPU APIC-ID from CPUID 1 instead of the linux virtual CPU number to identify the core for AMD dual core setups. Patch for i386/x86-64. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 3 次提交
-
-
由 Andi Kleen 提交于
Clean up the code greatly. Now uses the infrastructure from the Intel dual core patch Should fix a final bug noticed by Tyan of not detecting the nodes correctly in some corner cases. Patch for x86-64 and i386 Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Appended patch adds the support for Intel dual-core detection and displaying the core related information in /proc/cpuinfo. It adds two new fields "core id" and "cpu cores" to x86 /proc/cpuinfo and the "core id" field for x86_64("cpu cores" field is already present in x86_64). Number of processor cores in a die is detected using cpuid(4) and this is documented in IA-32 Intel Architecture Software Developer's Manual (vol 2a) (http://developer.intel.com/design/pentium4/manuals/index_new.htm#sdm_vol2a) This patch also adds cpu_core_map similar to cpu_sibling_map. Slightly hacked by AK. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-