Move the currently unused spec->init_hook at the beginning of the init
sequence so that the recently added ALC269VB coef setup can be put
there.  The alc_init() is again clean without an ugly check.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The coef setup in alc269_fill_coef() was designed only for ALC269VB
model, and this has some bad effects for other ALC269 variants, such
as turning off the external mic input.  Apply it only to ALC269VB.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Its BIOS suppresses the PC beep although it's implemented.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

My CD input got lost in commit 68ef0561.
Raymond helped me to add the necessary pin fixup to make it appear again. In
fact, this is basically his patch. It fixes alsa bug #5541.
Signed-off-by: NMarton Balint <cus@passwd.hu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent addition of volume-knob widget in the auto-parser broke
automute/autoswitch for some Realtek devices.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Kill hyphens from "Line-Out" name strings, as suggested by Mark Brown.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It seems that Lenovo machines (or codec chip itself?) leave the unsol
event tags and the enablement-flag from other pins bogusly even on the
unused pins.  Although this shouldn't be too critical, it's better to
clear them up sanely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some codecs don't supply the mute amp-capabilities although the lowest
volume gives the mute.  It'd be handy if the parser provides the mute
mixers in such a case.

This patch adds an extension amp-cap bit (which is used only in the
driver) to represent the min volume = mute state.  Also modified the
amp cache code to support the fake mute feature when this bit is set
but the real mute bit is unset.

In addition, conexant cx5051 parser uses this new feature to implement
the missing mute controls.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42825

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A bug report with an old Sony laptop showed that we can't rely on BIOS
setting the pins of headphones but the driver should set always by
itself.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The docking-station of Thinkpad X200 & co supports also an SPDIF output,
and the corresponding pin 0x1c has to be enabled for using it.
Reported-and-tested-by: NSebastian Glita <sebastian.glita@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds a new position_fix option value, 4, as a combo mode
to use LPIB for playbacks and POSBUF for captures.  It's the way
recommended by Intel hardware guys.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Enables port E of IDT 92HD91 codec as output and sets correct output
phase between ports E and D and high pass filter.
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When there are multiple input sources, the driver wrongly overwrites with
the value of the last input source on other slots at resume.  Thus the
primary input source may be shown wrongly.
Reported-and-tested-by: NJulian Sikorski <belegdol@gmail.com>
Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

[the order sorted by tiwai]
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added sanity checks in a few places not to assume the pins having the
certain amp caps or the input-source being always assigned to a mux.

No actual bugs have been triggered by these, but surely better to be a
bit more robust.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver may create duplicated mic boost controls when there are
multiple mics with the very same type / location, and this leads to
the error at actual kcontrol creation.  It needs to check the validity
of the created control and add a proper index if it's duplicated.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few clean-ups for post-static-quirk time:
- Call alc_auto_init_std() statically in alc_init() instead of setting
  spec->init_hook in each caller.  spec->init_hook field is left
  unused for any future use.

- Move the call of set_capture_mixer() to to alc_parse_auto_config()
  instead of each caller.

- Get rid of the ADC-filling and imux check in each parser function.
  This is no longer needed since the auto-parser always check ADCs and
  imux.  It was only for the static quirks.

- Kill unused defines
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the machine has two speakers but wants to put more multi-io
jacks, the parser shouldn't consider about the shared DAC but try to
assign the individual DACs.  Otherwise the channel mapping would be
fairly confused and lead to the wrong DACs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the multi-io is added to the two speaker output configuration,
the parser would try to add yet another "Bass Speaker" control since
it checks only cfg->line_outs.  Add a workaround for it by simply
passing the channel name in the case of multi-io outputs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Even if the outputs are using shared DACs, we can still create individual
mute siwtches since they are assigned per pin.  This allows to create,
e.g. Speaker and Bass Speaker mute switches while the single volume is
used for these outputs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When BIOS is damn crazy and gives no pin-config at all, the driver might
lead to a NULL dereference.  Let's add a NULL check for such a case.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Similarly in patch_via.c, parse the active analog-loopback connections
and create a list dynamically rather than static arrays.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Resitance is futile.  The remaining static model quirks for Apple
machines with ALC882-compatible codecs are converted to the auto-parser
now.  We can remove all alc*_quirks.c finally.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If anyone wants to debug the driver and avoid the existing fix-ups,
pass model=nofixup option.  Then the driver will skip to pick up the
fixup list.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Finally the all static quirks for ALC880 are converted to the
auto-parser.  Since we are never sure whether the BIOS on so many old
machines are really correct, the quirk table entries are copied as
they are, but just providing the proper pin-config values
accordingly.

Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted
slightly to be built again.  There might be some compile warnings due
to the remaining alc882 quirks, but these shall be killed sooner or
later, I don't care it much at this point.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It turned out that BIOS on most of ASUS mobo's set the pin-config tables
reasonably well for the auto-parser.  We'd need GPIO setups, but should
work as is other than that.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ASUS W1V has a sane pin-config table set by BIOS.  The only missing piece
is the setup of GPIO1.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ASUS Z71V has a totally broken BIOS setup (at least the info I got),
thus we need to override the whole pin-config table to make the
auto-parser working correctly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC880 model=uniwill-dig requires the fix-up of bogus BIOS pin default
configurations.  Other than that, it's pretty normal.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The model=uniwill would work almost as is, but a couple of adjustments
are needed to make the mutli-io working correctly.  The headphone and
speaker pins have to be marked properly in pin configs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Uniwill p53 has a sane BIOS setup but just needs the volume-knob handling
like Fujitsu laptops with ALC880.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Similar as the previous patch for model=fujitsu, we can now move the
static quirk for F1734 to the auto-parser.  The only difference is the
default pin configurations: F1734 has less pins than Amilo's.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now adding the support for the volume-knob widget, we can move the static
quirk for ALC880 model=fujitsu to the auto-parser completely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the
whole setups of patch_ops & co, so that the fix-up function may override
the default setup.  This will be needed for installing the own unsol
event handler (e.g. for volume-knob controls).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It needs a few extra setups for EAPD, but others look fairly
straightforward.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clevo machines with ALC880 are all well with proper BIOS setup.
It seems still requiring the additional COEF setup for the EAPD.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Refactor the DAC filling function to be used for both the primary
line outputs and extra outputs using the individual badness tables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Medion W810 with ALC880 has a typical BIOS bug, copying the
pin-defaults without disabling the unused pins.  At least, the pin
0x17 must be disabled.  Also, it requires GPIO-2 setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC880 model=lg could work fine with the auto-parser due to the recent
rewrite, but it still needs the manual adjustment; namely, the BIOS leaves
unused pins as some real active jacks.  This confuses the parser.
Thus we just cover these pins and override the pin-configs as a fix-up.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Try harder to fit the multi-io pins also by checking the hard-wired
connections for multi-ios.  Also, the badness values are adjusted to
prioritize the multi-ios as more valuable.  These changes will enable
the multi-io on some machines without losing the current capability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>