ata_device->dma_mode's initial value is zero, which is not a valid dma
mode, but ata_dma_enabled will return true for this value. This patch
sets dma_mode to 0xff in reset function, so that ata_dma_enabled will
not return true for this case, or it will cause problem for pata_acpi.

The corrsponding bugzilla page is at:
https://bugzilla.kernel.org/show_bug.cgi?id=49151Reported-by: NPhillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Tested-by: NSzymon Janc <szymon@janc.net.pl>
Tested-by: NDutra Julio <dutra.julio@gmail.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

NCQ capability was used to check availability of SATA Settings page
from Identify Device Data Log, which contains DevSlp timing variables.
It does not work on some HDDs and leads to error messages.
IDENTIFY word 78 bit 5(Hardware Feature Control) should be used.

Quoting SATA spec 3.1:
If Hardware Feature Control is supported, then:
a) IDENTIFY DEVICE data word 78 bit 5 (see 13.2.1.18) shall be
set to one;
b) the SET FEATURES Select Hardware Feature Control subcommand
shall be supported (see 13.3.8);
c) page 08h of the Identify Device Data log (see 13.7.7) shall
be supported;

This patch is not tested on SATA HDD with DevSlp supported.
Reported-by: NBorislav Petkov <bp@amd64.org>
Signed-off-by: NShane Huang <shane.huang@amd.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Commit 66fa7f21 "libata-acpi: improve ACPI disabling" introdcued the
behaviour of disabling ATA ACPI if ata_acpi_on_devcfg failed the 2nd
time, but commit 30dcf76a dropped this behaviour and this caused
problem for Dimitris Damigos, where his laptop can not resume correctly.

The bugzilla page for it is:
https://bugzilla.kernel.org/show_bug.cgi?id=49331

The problem is, ata_dev_push_id will fail the 2nd time it is invoked,
and due to disabling ACPI code is dropped, ata_acpi_on_devcfg which
calls ata_dev_push_id will keep failing and eventually made the device
disabled.

This patch restores the original behaviour, if acpi failed the 2nd time,
disable acpi functionality for the device(and we do not event need to
add a debug message for this as it is still there ;-).
Reported-by: NDimitris Damigos <damigos@freemail.gr>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

dev_<level> calls take less code than dev_printk(KERN_<LEVEL>
and reducing object size is good.
Coalesce formats for easier grep.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

'acdev->qc', 'acdev->qc->ap', and 'acdev->qc->tf' expressions are used multiple
times in this function, so it makes sense to use the local variables for them.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

ahci_highbank_hardreset() uses bare number for the BSY bit of the ATA status
register, despite it is #define'd in <linux/ata.h>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

... because those functions don't use this parameter.

While at it, correctly align 'total_len' parameter.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The variable addr is initialized but never used
otherwise, so remove the unused variable.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The variable addr is initialized but never used
otherwise, so remove the unused variable.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The variable port_flags is initialized but never used
otherwise, so remove the unused variable.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

I am working on a device which uses the cs5536 pata driver. There
are some broken hardware revisions out in the field, which can be
detected via DMI. On older versions with an embedded BIOS I
used libata.dma=0 to disable dma completely.
Now we are switching to a coreboot/seabios based BIOS where we
have DMI support and so I think its a good idea to get rid of
all those hacky kernel parameters as the same image
is used other devices where libata.dma=0 is not a good idea.
Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

An earlier commit cd006086 ("ata_piix:
defer disks to the Hyper-V drivers by default") broke MS Virtual PC
guests. Hyper-V guests and Virtual PC guests have nearly identical DMI
info. As a result the driver does currently ignore the emulated hardware
in Virtual PC guests and defers the handling to hv_blkvsc. Since Virtual
PC does not offer paravirtualized drivers no disks will be found in the
guest.

One difference in the DMI info is the product version. This patch adds a
match for MS Virtual PC 2007 and "unignores" the emulated hardware.

This was reported for openSuSE 12.1 in bugzilla:
https://bugzilla.novell.com/show_bug.cgi?id=737532

Here is a detailed list of DMI info from example guests:

hwinfo --bios:

virtual pc guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "VS2005R2"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    Asset Tag: "7188-3705-6309-9738-9645-0364-00"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k8 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    Asset Tag: "7076-9522-6699-1042-9501-1785-77"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k12 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    Asset Tag: "8374-0485-4557-6331-0620-5845-25"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

sata_promise's pdc_hard_reset_port() needs to serialize because it
flips a port-specific bit in controller register that's shared by
all ports. The code takes the ata host lock for this, but that's
broken because an interrupt may arrive on our irq during the hard
reset sequence, and that too will take the ata host lock. With
lockdep enabled a big nasty warning is seen.

Fixed by adding private state to the ata host structure, containing
a second lock used only for serializing the hard reset sequences.
This eliminated the lockdep warnings both on my test rig and on
the original reporter's machine.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Tested-by: NAdko Branil <adkobranil@yahoo.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

With "mm: vmscan: scale number of pages reclaimed by reclaim/compaction
based on failures" reverted, Zdenek Kabelac reported the following

  Hmm,  so it's just took longer to hit the problem and observe
  kswapd0 spinning on my CPU again - it's not as endless like before -
  but still it easily eats minutes - it helps to	turn off  Firefox
  or TB  (memory hungry apps) so kswapd0 stops soon - and restart
  those apps again.  (And I still have like >1GB of cached memory)

  kswapd0         R  running task        0    30      2 0x00000000
  Call Trace:
    preempt_schedule+0x42/0x60
    _raw_spin_unlock+0x55/0x60
    put_super+0x31/0x40
    drop_super+0x22/0x30
    prune_super+0x149/0x1b0
    shrink_slab+0xba/0x510

The sysrq+m indicates the system has no swap so it'll never reclaim
anonymous pages as part of reclaim/compaction.  That is one part of the
problem but not the root cause as file-backed pages could also be
reclaimed.

The likely underlying problem is that kswapd is woken up or kept awake
for each THP allocation request in the page allocator slow path.

If compaction fails for the requesting process then compaction will be
deferred for a time and direct reclaim is avoided.  However, if there
are a storm of THP requests that are simply rejected, it will still be
the the case that kswapd is awake for a prolonged period of time as
pgdat->kswapd_max_order is updated each time.  This is noticed by the
main kswapd() loop and it will not call kswapd_try_to_sleep().  Instead
it will loopp, shrinking a small number of pages and calling
shrink_slab() on each iteration.

The temptation is to supply a patch that checks if kswapd was woken for
THP and if so ignore pgdat->kswapd_max_order but it'll be a hack and not
backed up by proper testing.  As 3.7 is very close to release and this
is not a bug we should release with, a safer path is to revert "mm:
remove __GFP_NO_KSWAPD" for now and revisit it with the view to ironing
out the balance_pgdat() logic in general.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dev_pm_qos_add_request() can return 0, 1, or a negative error code,
therefore the correct error test is "if (error < 0)." Checking just for
non-zero return code leads to erroneous setting of the req->dev pointer
to NULL, which then leads to a repeated call to
dev_pm_qos_add_ancestor_request() in st1232_ts_irq_handler(). This in turn
leads to an Oops, when the I2C host adapter is unloaded and reloaded again
because of the inconsistent state of its QoS request list.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

fix bug where a register which was only meant to be read in 578xx/57712
devices causes a bogus error message to be logged when read from other
devices.
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch reverts b01af457.

The original patch was tested with emulated hardware. Real
hardware chokes.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=47041Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hi Jens,

Another tiny patch.

Removed __packed before the struct smart_attr and added __packed at end of
the structure to fix padding issue.
Signed-off-by: NSelvan Mani  <smani@micron.com>
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Calling the request handler directly on a plugged queue defeats
the performance improvements provided by the plugging mechanism.
Use the __blk_run_queue function instead of calling the request
handler directly, so that we don't interfere with the block
layer's ability to plug the queue.
Signed-off-by: NEd Cashin <ecashin@coraid.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The dereference to port should be moved below the NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we're building a 32-bit kernel and CONFIG_LBADF isn't set,
sector_t is 32-bits wide. The shifts by 32 and 40 are thus
larger than we support.

Cast the sector offset to a u64 to avoid these warnings.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Previous commit use value 3 for erasemode mask.
Changing the mask to correct value to 2
Signed-off-by: NSelvan Mani <smani@micron.com>
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Earlier lba address was assigned directly to lba_low and lba_low_ex,
which would result in a different number (bytes reversed) in
big-endian systems. Now assigning lba address byte-by-byte to fis.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSelvan Mani <smani@micron.com>
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The mtip driver lifted this code from elsewhere and then added a special
handling check for SEC_ERASE_UNIT. If the caller tries to do a security
erase but passes no output data for the command then outbuf is not
allocated and the driver duly explodes.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NSelvan Mani <smani@micron.com>
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Request based dm attempts to re-run the request queue off the
request completion path. If used with a driver that potentially does
end_io from its request_fn, we could deadlock trying to recurse
back into request dispatch. Fix this by punting the request queue
run to kblockd.

Tested to fix a quickly reproducible deadlock in such a scenario.

Cc: stable@kernel.org
Acked-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We need to first destroy the floppy_wq workqueue before cleaning up
the queue. Otherwise we might race with still pending work with the
workqueue, but all the block queue already gone. This might lead to
various oopses, such as

 CPU 0
 Pid: 6, comm: kworker/u:0 Not tainted 3.7.0-rc4 #1 Bochs Bochs
 RIP: 0010:[<ffffffff8134eef5>]  [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0
 RSP: 0000:ffff88000dc7dd88  EFLAGS: 00010092
 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: ffff88000f602688 RSI: ffffffff81fd95d8 RDI: 6b6b6b6b6b6b6b6b
 RBP: ffff88000dc7dd98 R08: ffffffff81fd95c8 R09: 0000000000000000
 R10: ffffffff81fd9480 R11: 0000000000000001 R12: 6b6b6b6b6b6b6b6b
 R13: ffff88000dc7dfd8 R14: ffff88000dc7dfd8 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000000 CR3: 0000000001e11000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process kworker/u:0 (pid: 6, threadinfo ffff88000dc7c000, task ffff88000dc5ecc0)
 Stack:
  0000000000000000 0000000000000000 ffff88000dc7ddb8 ffffffff8134efee
  ffff88000dc7ddb8 0000000000000000 ffff88000dc7dde8 ffffffff814aef3c
  ffffffff81e75d80 ffff88000dc0c640 ffff88000fbfb000 ffffffff814aed90
 Call Trace:
  [<ffffffff8134efee>] blk_fetch_request+0xe/0x30
  [<ffffffff814aef3c>] redo_fd_request+0x1ac/0x400
  [<ffffffff814aed90>] ? start_motor+0x130/0x130
  [<ffffffff8106b526>] process_one_work+0x136/0x450
  [<ffffffff8106af65>] ? manage_workers+0x205/0x2e0
  [<ffffffff8106bb6d>] worker_thread+0x14d/0x420
  [<ffffffff8106ba20>] ? rescuer_thread+0x1a0/0x1a0
  [<ffffffff8107075a>] kthread+0xba/0xc0
  [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80
  [<ffffffff818b553a>] ret_from_fork+0x7a/0xb0
  [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80
 Code: 0f 84 c0 00 00 00 83 f8 01 0f 85 e2 00 00 00 81 4b 40 00 00 80 00 48 89 df e8 58 f8 ff ff be fb ff ff ff
 fe ff ff <49> 8b 1c 24 49 39 dc 0f 85 2e ff ff ff 41 0f b6 84 24 28 04 00
 RIP  [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0
  RSP <ffff88000dc7dd88>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Tested-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Properly terminate the DMA transfer in case the DMA PIO transfer
or setup fails for any reason.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>

Do not fail if dpll4_m4_ck is missing. The clock is not there on omap24xx,
so this should not be a hard error.

The patch retains the functionality before the commit 185bae10 (OMAPDSS:
DSS: Cleanup cpu_is_xxxx checks).
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

When a write to a replacement device completes, we carefully
and correctly found the rdev that the write actually went to
and the blithely called rdev_dec_pending on the primary rdev,
even if this write was to the replacement.

This means that any writes to an array while a replacement
was ongoing would cause the nr_pending count for the primary
device to go negative, so it could never be removed.

This bug has been present since replacement was introduced in
3.3, so it is suitable for any -stable kernel since then.
Reported-by: N"George Spelvin" <linux@horizon.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>

When a replacement operation completes there is a small window
when the original device is marked 'faulty' and the replacement
still looks like a replacement.  The faulty should be removed and
the replacement moved in place very quickly, bit it isn't instant.

So the code write out to the array must handle the possibility that
the only working device for some slot in the replacement - but it
doesn't.  If the primary device is faulty it just gives up.  This
can lead to corruption.

So make the code more robust: if either  the primary or the
replacement is present and working, write to them.  Only when
neither are present do we give up.

This bug has been present since replacement was introduced in
3.3, so it is suitable for any -stable kernel since then.
Reported-by: N"George Spelvin" <linux@horizon.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>

Only compile time tested, noticed nv50_fence_create was never used,
so fix this. This will probably fix vblank on nv50 cards.

Hopefully this is still in time for 3.7 final release.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The commit 81732c3b
("Fix line garbage in virtual console on command line edition")
made a regression with some machines: some characters were not erased
after line edition.

This patch adjusts the number of moved characters and the size of the
region to be updated.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Tested-by: NKrzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e444768
    MD: raid5 avoid unnecessary zero page for trim

change raid5 to clear R5_Discard when the complete request is
handled rather than when submitting the per-device discard request.
However it did not clear R5_Discard for the parity device.

This means that if the stripe_head was reused before it expired from
the cache, the setting would be wrong and a hang would result.

Also if the R5_Uptodate bit happens to be set, R5_Discard again
won't be cleared.  But R5_Uptodate really should be clear at this point.

So make sure R5_Discard is cleared in all cases, and clear
R5_Uptodate when a 'discard' completes.
Signed-off-by: NNeilBrown <neilb@suse.de>

stripe_handle.

The chunk of code in stripe_handle which responds to a
*_result value in reconstruct_state is really the completion
of some processing that happened outside of handle_stripe
(possibly asynchronously) and so should be one of the first
things done in handle_stripe().

After the next patch it will be important that it happens before
handle_stripe_clean_event(), as that will clear some dev->flags
bit that this code tests.
Signed-off-by: NNeilBrown <neilb@suse.de>

Some platforms need the pendown GPIO debounce time setting programmed.
Since the pendown GPIO is handled by the driver, the debounce time
should also be handled along with the pendown GPIO request.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The thing is that team_dev_queue_xmit() returns NET_XMIT_* or -E*.
bc_trasmit() should return true in case all went well. So use ! to get
correct retval from team_dev_queue_xmit() result.
This bug caused iface statistics to be badly computed.

This bug was introduced by:
team: add broadcast mode (5fc88991)
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach.
Signed-off-by: NSarveshwar Bandi <sarveshwar.bandi@emulex.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An SKB paged fragment can consist of a compound page with order > 0.
However the netchannel protocol deals only in PAGE_SIZE frames.

Handle this in xennet_make_frags by iterating over the frames which
make up the page.

This is the netfront equivalent to 6a8ed462 for netback.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
Cc: xen-devel@lists.xen.org
Cc: Eric Dumazet <edumazet@google.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: ANNIE LI <annie.li@oracle.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Stefan Bader <stefan.bader@canonical.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The irqs are enabled one-by-one in pm core resume_noirq phase.
This leads to situation where the twl4030 primary interrupt
handler (PIH) is enabled before the chained secondary handlers
(SIH). As the PIH cannot clear the pending interrupt, and
SIHs have not been enabled yet, a flood of interrupts hangs
the device.

Fixed the issue by setting the SIH irqs with IRQF_EARLY_RESUME
flags, so they get enabled before the PIH.
Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@jollamobile.com>
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>