- 01 1月, 2015 30 次提交
-
-
由 Alexander Duyck 提交于
This change adds a tracking value for the maximum suffix length of all prefixes stored in any given tnode. With this value we can determine if we need to backtrace or not based on if the suffix is greater than the pos value. By doing this we can reduce the CPU overhead for lookups in the local table as many of the prefixes there are 32b long and have a suffix length of 0 meaning we can immediately backtrace to the root node without needing to test any of the nodes between it and where we ended up. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
For some reason the compiler doesn't seem to understand that when we are in a loop that runs from tnode_child_length - 1 to 0 we don't expect the value of tn->bits to change. As such every call to tnode_get_child was rerunning tnode_chile_length which ended up consuming quite a bit of space in the resultant assembly code. I have gone though and verified that in all cases where tnode_get_child is used we are either winding though a fixed loop from tnode_child_length - 1 to 0, or are in a fastpath case where we are verifying the value by either checking for any remaining bits after shifting index by bits and testing for leaf, or by using tnode_child_length. size net/ipv4/fib_trie.o Before: text data bss dec hex filename 15506 376 8 15890 3e12 net/ipv4/fib_trie.o After: text data bss dec hex filename 14827 376 8 15211 3b6b net/ipv4/fib_trie.o Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change pulls the node_set_parent functionality out of put_child_reorg and instead leaves that to the function to take care of as well. By doing this we can fully construct the new cluster of tnodes and all of the pointers out of it before we start routing pointers into it. I am suspecting this will likely fix some concurency issues though I don't have a good test to show as such. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change pushes the tnode freeing down into the inflate and halve functions. It makes more sense here as we have a better grasp of what is going on and when a given cluster of nodes is ready to be freed. I believe this may address a bug in the freeing logic as well. For some reason if the freelist got to a certain size we would call synchronize_rcu(). I'm assuming that what they meant to do is call synchronize_rcu() after they had handed off that much memory via call_rcu(). As such that is what I have updated the behavior to be. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes it so that the assignment of the tnode to the parent is handled directly within whatever function is currently handling the node be it inflate, halve, or resize. By doing this we can avoid some of the need to set NULL pointers in the tree while we are resizing the subnodes. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change pulls the logic for if we should inflate/halve the nodes out into separate functions. It also addresses what I believe is a bug where 1 full node is all that is needed to keep a node from ever being halved. Simple script to reproduce the issue: modprobe dummy; ifconfig dummy0 up for i in `seq 0 255`; do ifconfig dummy0:$i 10.0.${i}.1/24 up; done ifconfig dummy0:256 10.0.255.33/16 up for i in `seq 0 254`; do ifconfig dummy0:$i down; done Results from /proc/net/fib_triestat Before: Local: Aver depth: 3.00 Max depth: 4 Leaves: 17 Prefixes: 18 Internal nodes: 11 1: 8 2: 2 10: 1 Pointers: 1048 Null ptrs: 1021 Total size: 11 kB After: Local: Aver depth: 3.41 Max depth: 5 Leaves: 17 Prefixes: 18 Internal nodes: 12 1: 8 2: 3 3: 1 Pointers: 36 Null ptrs: 8 Total size: 3 kB Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change consists of a cut/paste of resize to behind inflate and halve so that I could remove the two function prototypes. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change is to start cleaning up some of the rcu_read_lock/unlock handling. I realized while reviewing the code there are several spots that I don't believe are being handled correctly or are masking warnings by locally calling rcu_read_lock/unlock instead of calling them at the correct level. A common example is a call to fib_get_table followed by fib_table_lookup. The rcu_read_lock/unlock ought to wrap both but there are several spots where they were not wrapped. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes it so that anything that can be shifted by, or compared to a value shifted by bits is updated to be an unsigned long. This is mostly a precaution against an insanely huge address space that somehow starts coming close to the 2^32 root node size which would require something like 1.5 billion addresses. I chose unsigned long instead of unsigned long long since I do not believe it is possible to allocate a 32 bit tnode on a 32 bit system as the memory consumed would be 16GB + 28B which exceeds the addressible space for any one process. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change moves the pos value to the other side of the "bits" field. By doing this it actually simplifies a significant amount of code in the trie. For example when halving a tree we know that the bit lost exists at oldnode->pos, and if we inflate the tree the new bit being add is at tn->pos. Previously to find those bits you would have to subtract pos and bits from the keylength or start with a value of (1 << 31) and then shift that. There are a number of spots throughout the code that benefit from this. In the case of the hot-path searches the main advantage is that we can drop 2 or more operations from the search path as we no longer need to compute the value for the index to be shifted by and can instead just use the raw pos value. In addition the tkey_extract_bits is now defunct and can be replaced by get_index since the two operations were doing the same thing, but now get_index does it much more quickly as it is only an xor and shift versus a pair of shifts and a subtraction. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch updates the fib_table_insert function to take advantage of the changes made to improve the performance of fib_table_lookup. As a result the code should be smaller and run faster then the original. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch makes use of the same features I made use of for fib_table_lookup to streamline fib_find_node. The resultant code should be smaller and run faster than the original. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch is meant to reduce the complexity of fib_table_lookup by reducing the number of variables to the bare minimum while still keeping the same if not improved functionality versus the original. Most of this change was started off by the desire to rid the function of chopped_off and current_prefix_length as they actually added very little to the function since they only applied when computing the cindex. I was able to replace them mostly with just a check for the prefix match. As long as the prefix between the key and the node being tested was the same we know we can search the tnode fully versus just testing cindex 0. The second portion of the change ended up being a massive reordering. Originally the calls to check_leaf were up near the start of the loop, and the backtracing and descending into lower levels of tnodes was later. This didn't make much sense as the structure of the tree means the leaves are always the last thing to be tested. As such I reordered things so that we instead have a loop that will delve into the tree and only exit when we have either found a leaf or we have exhausted the tree. The advantage of rearranging things like this is that we can fully inline check_leaf since there is now only one reference to it in the function. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes it so that leaf and tnode are the same struct. As a result there is no need for rt_trie_node anymore since everyting can be merged into tnode. On 32b systems this results in the leaf being 4 bytes larger, however I don't know if that is really an issue as this and an eariler patch that added bits & pos have increased the size from 20 to 28. If I am not mistaken slub/slab allocate on power of 2 sizes so 20 was likely being rounded up to 32 anyway. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Both the leaf and the tnode had an rcu_head in them, but they had them in slightly different places. Since we now have them in the same spot and know that any node with bits == 0 is a leaf and the rest are either vmalloc or kmalloc tnodes depending on the value of bits it makes it easy to combine the functions and reduce overhead. In addition I have taken advantage of the rcu_head pointer to go ahead and put together a simple linked list instead of using the tnode pointer as this way we can merge either type of structure for freeing. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes some fundamental changes to the way leaves and tnodes are constructed. The big differences are: 1. Leaves now populate pos and bits indicating their full key size. 2. Trie nodes now mask out their lower bits to be consistent with the leaf 3. Both structures have been reordered so that rt_trie_node now consisists of a much larger region including the pos, bits, and rcu portions of the tnode structure. On 32b systems this will result in the leaf being 4B larger as the pos and bits values were added to a hole created by the key as it was only 4B in length. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The trie usage stats were currently being shared by all threads that were calling fib_table_lookup. As a result when multiple threads were performing lookups simultaneously the trie would begin to cache bounce between those threads. In order to prevent this I have updated the usage stats to use a set of percpu variables. By doing this we should be able to avoid the cache bouncing and still make use of these stats. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The GRE tap device supports Ethernet over GRE, but doesn't care about the source address of the tunnel, therefore it can be changed without bring device down. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bill Hong 提交于
Previously l2tp module did not provide any means for the user space to get notified when tunnels/sessions are added/modified/deleted. This change contains the following - create a multicast group for the listeners to register. - notify the registered listeners when the tunnels/sessions are created/modified/deleted. Signed-off-by: NBill Hong <bhong@brocade.com> Reviewed-by: NStephen Hemminger <stephen@networkplumber.org> Reviewed-by: NSven-Thorsten Dietrich <sven@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Gartrell 提交于
Instead of -1 with EAGAIN, read on a O_NONBLOCK tun fd will return 0. This fixes this by properly returning the error code from __skb_recv_datagram. Signed-off-by: NAlex Gartrell <agartrell@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Gartrell 提交于
Validated that this was actually using the unsigned comparison with gdb. Signed-off-by: NAlex Gartrell <agartrell@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Fix sparse warning: net/tipc/link.c:1924:40: warning: Using plain integer as NULL pointer Signed-off-by: NFabian Frederick <fabf@skynet.be> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Govindarajulu Varadarajan says: ==================== enic: Check for DMA mapping error After dma mapping the buffers, enic does not call dma_mapping_error() to check if mapping is successful. This series fixes the issue by checking return value of pci_dma_mapping_error() after pci_map_single(). This is reported by redhat here https://bugzilla.redhat.com/show_bug.cgi?id=1145016 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch adds generic statistics for enic. As of now dma_map_error is the only member. dma_map_erro is incremented every time dma maping error happens. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch checks for pci_dma_mapping_error() after dma mapping the data. If the dma mapping fails we remove the previously queued frags and return NETDEV_TX_OK. Reported-by: NJan Stancek <jstancek@redhat.com> Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch makes vnic_wq_buf doubly liked list. This is needed for dma_mapping error check, in case some frag's dma map fails, we need to move back and remove previously queued buffers. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Fugang Duan says: ==================== net: fec: add Wake-on-LAN support The patch series enable FEC Wake-on-LAN feature for i.MX6q/dl and i.MX6SX SOCs. FEC HW support sleep mode, when system in suspend status with FEC all clock gate off, magic packet can wake up system. For different SOCs, there have special SOC GPR register to let FEC enter sleep mode or exit sleep mode, add these to platform callback for driver' call. Patch#1: add WOL interface supports. Patch#2: add SOC special sleep of/off operations for driver's sleep callback. Patch#3: add magic pattern support for devicetree. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nimrod Andy 提交于
Add FEC magic-packet feature support. Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nimrod Andy 提交于
i.MX6q/dl, i.MX6SX SOCs enet support sleep mode that magic packet can wake up system in suspend status. For different SOCs, there have some SOC specifical GPR register to set sleep on/off mode. So add these to callback function for driver. Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nimrod Andy 提交于
Support for Wake-on-LAN using Magic Packet. ENET IP supports sleep mode in low power status, when system enter suspend status, Magic packet can wake up system even if all SOC clocks are gate. The patch doing below things: - flagging the device as a wakeup source for the system, as well as its Wake-on-LAN interrupt - prepare the hardware for entering WoL mode - add standard ethtool WOL interface - enable the ENET interrupt to wake us Tested on i.MX6q/dl sabresd, sabreauto boards, i.MX6SX arm2 boards. Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 12月, 2014 10 次提交
-
-
由 Kevin Hao 提交于
Fix the following spare warning: drivers/net/ethernet/freescale/gianfar.c:3521:60: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/freescale/gianfar.c:3521:60: expected unsigned int [noderef] <asn:2>*addr drivers/net/ethernet/freescale/gianfar.c:3521:60: got unsigned int [usertype] *rfbptr drivers/net/ethernet/freescale/gianfar.c:205:16: warning: incorrect type in assignment (different address spaces) drivers/net/ethernet/freescale/gianfar.c:205:16: expected unsigned int [usertype] *rfbptr drivers/net/ethernet/freescale/gianfar.c:205:16: got unsigned int [noderef] <asn:2>*<noident> drivers/net/ethernet/freescale/gianfar.c:2918:44: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/freescale/gianfar.c:2918:44: expected unsigned int [noderef] <asn:2>*addr drivers/net/ethernet/freescale/gianfar.c:2918:44: got unsigned int [usertype] *rfbptr Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kevin Hao 提交于
Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
There's no need to do header check for virtio-net since: - Host sets dodgy for all gso packets from guest and check the header. - Host should be prepared for all kinds of evil packets from guest, since malicious guest can send any kinds of packet. So this patch sets NETIF_F_GSO_ROBUST for virtio-net to skip the check. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Eremin-Solenikov 提交于
In the end asm/mach/irda.h header is not used by anybody except sa1100. Move the header to the platform data includes dir and rename it to irda-sa11x0.h. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Richard Cochran says: ==================== Time Counter fixes and improvements Several PTP Hardware Clock (PHC) drivers implement the clock in software using the timecounter/cyclecounter code. This series adds one simple improvement and one more subtle fix to the shared timecounter facility. Credit for this series goes to Janusz Użycki, who pointed the issues out to me off list. Patch #1 simply move the timecounter code into its own file. When working on this series, it was really annoying to see half the kernel recompile after every tweak to the timecounter stuff. There is no reason to keep this together with the clocksource code. Patch #2 implements an improved adjtime() method, and patches 3-10 convert all of the drivers over to the new method. Patch #11 fixes a subtle but important issue with the timecounter WRT frequency adjustment. As it stands now, a timecounter based PHC will exhibit a variable frequency resolution (and variable time error) depending on how often the clock is read. In timecounter_read_delta(), the expression (delta * cc->mult) >> cc->shift; can lose resolution from the adjusted value of 'mult'. If the value of 'delta' is too small, then small changes in 'mult' have no effect. However, if the delta value is large enough, then small changes in 'mult' will have an effect. Reading the clock too often means smaller 'delta' values which in turn will spoil the fine adjustments made to 'mult'. Up until now, this effect did not show up in my testing. The following example explains why. The CPTS has an input clock of 250 MHz, and the clock source uses mult=0x80000000 and shift=29, making the ticks to nanoseconds conversion like this: ticks * 2^31 ------------ 2^29 Imagine what happens if the clock is read every 10 milliseconds. Ten milliseconds are about 2500000 ticks, which corresponds to about 21 bits. The product in the numerator has then 52 bits. After the shift operation, 23 bits are preserved. This results in a frequency adjustment resolution of about 0.1 ppm (not _too_ bad.) A frequency resolution of 1 ppm requires 20 bits. A frequency resolution of 1 ppb requires 30 bits. For the 250 MHz CPTS clock, reading every 4 seconds yields a 1 ppb resolution (which is the finest that our API allows). However, the error can be much higher if the clock is read too often or if time stamps occur close in time to read operations. In general it is really not acceptable to allow the rate of clock readings to influence the clock accuracy. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
The current timecounter implementation will drop a variable amount of resolution, depending on the magnitude of the time delta. In other words, reading the clock too often or too close to a time stamp conversion will introduce errors into the time values. This patch fixes the issue by introducing a fractional nanosecond field that accumulates the low order bits. Reported-by: NJanusz Użycki <j.uzycki@elproma.com.pl> Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-