Need to be careful to release struct_mutext when request alloc
failed and take consistent handling for return status as with
normal go out path. Ensure to check correct workload request in
complete path too.

v2: Add Fixes note

Fixes: 90d27a1b ("drm/i915/gvt: fix deadlock in workload_thread")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

For 64bit bar while reading the higher 32bit the value should be returned
directly.

In the current implementation the higher 32bit value was discarded and not
written to the cfg space of vgpu which lead to an incorrect bar size.
Signed-off-by: NXiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Initiate param.primary to 1. We should be primary currently.
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Instead of partially depending on vfio pin/unpin pages interface if
mdev is available, which would result in failure if vfio is not
on. But replace with a wrapper which need to be fixed till mdev
support got fully merged.

Cc: Jike Song <jike.song@intel.com>
Cc: Xiaoguang Chen <xiaoguang.chen@intel.com>
Reviewed-by: NXiaoguang Chen <Xiaoguang.chen@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

We no longer cater for pre-production revisions of Skylake.

Fixes: d4362225 ("drm/i915/gvt: update misc ctl regs base on stepping info")
Cc: Ping Gao <ping.a.gao@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: <intel-gfx@lists.freedesktop.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

This patch will fix warning log print during command scan caused by
empty workload (ring head equals tail). This patch avoid going into
real scan process if workload is empty. It's guest's responsibility
to make sure if an empty workload is proper to submit to HW.

[v2] modify the patch description. It's a fix, not a w/a.
Signed-off-by: NPei Zhang <pei.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Since there's no opregion in vgpu so clear the opregion bits in case
guest access it.
Signed-off-by: NXiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Add more MMIO regs with command access flag for whitelist as they are
accessed by command.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Static checker gave warning on:

drivers/gpu/drm/i915/gvt/edid.c:506 intel_gvt_i2c_handle_aux_ch_write()
warn: odd binop '0x0 & 0xff'

We try to return ACK for I2C reply which is defined with 0. Remove
bit shift which caused misleading bit op.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Gvt gdrst handler handle_device_reset() invoke function
setup_vgpu_mmio() to reset mmio status. In this case,
the virtual mmio memory has been allocated already. The
new allocation just cause old mmio memory leakage.
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

We initiate vgpu->workload_q_head via for_each_engine
macro which may skip unavailable engines. So we should
follow this rule anywhere. The function
intel_vgpu_reset_execlist is not aware of this. Kernel
crash when touch a uninitiated vgpu->workload_q_head[x].
Let's fix it by using for_each_engine_masked and skip
unavailable engine ID. Meanwhile rename ring_bitmap to
general name engine_mask.

v2: remove unnecessary engine activation check (zhenyu)
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Emulate right behavior for tlb_control, set to ZERO upon write.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NMin He <min.he@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

It's a classical abba type deadlock when using 2 mutex objects, which
are gvt.lock(a) and drm.struct_mutex(b). Deadlock happens in threads:
1. intel_gvt_create/destroy_vgpu: P(a)->P(b)
2. workload_thread: P(b)->P(a)

Fix solution is align the lock acquire sequence in both threads. This
patch choose to adjust the sequence in workload_thread function.

This fixed lockup symptom for guest-reboot stress test.

v2: adjust sequence in workload_thread based on zhenyu's suggestion.
    adjust sequence in create/destroy_vgpu function.
v3: fix to still require struct_mutex for dispatch_workload()
Signed-off-by: NPei Zhang <pei.zhang@intel.com>
[zhenyuw: fix unused variables warnings.]
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'gvt-next-kvmgt-framework' of https://github.com/01org/gvt-linux into drm-intel-next-queued

Zhenyu Wang writes:

gvt-next-kvmgt-framework

This adds initial KVMGT framework based on GVT-g MPT(Mediated Passthrough) interface.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

At the moment we allocate enough sg table entries assuming we
will not be able to do any coalescing. But since in practice
we most often can, and more so very effectively, this ends up
wasting a lot of memory.

A simple and effective way of trimming the over-allocated
entries is to copy the table over to a new one allocated to the
exact size.

Experiments on my freshly logged and idle desktop (KDE) showed
that by doing this we can save approximately 1 MiB of RAM, or
when running a typical benchmark like gl_manhattan I have
even seen a 6 MiB saving.

More complicated techniques such as only copying the last used
page and freeing the rest are left to the reader.

v2:
 * Update commit message.
 * Use temporary sg_table on stack. (Chris Wilson)

v3:
 * Commit message update.
 * Comment added.
 * Replace memcpy with copy assignment.
   (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478704423-7447-1-git-send-email-tvrtko.ursulin@linux.intel.com

KVMGT is the MPT implementation based on VFIO/KVM. It provides
a kvmgt_mpt ops to gvt for vGPU access mediation, e.g. to
mediate and emulate the MMIO accesses, to inject interrupts
to vGPU user, to intercept the GTT writing and replace it with
DMA-able address, to write-protect guest PPGTT table for
shadowing synchronization, etc. This patch provides the MPT
implementation for GVT, not yet functional due to theabsence
of mdev.

It's built as kvmgt.ko, depends on vfio.ko, kvm.ko and mdev.ko,
and being required by i915.ko. To not introduce hard dependency
in i915.ko, we used indirect symbol reference. But that means
users have to include kvmgt.ko into init ramdisk if their
i915.ko is included.
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NXiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

There are currently 4 methods in intel_gvt_io_emulation_ops
to emulate CFG/MMIO reading/writing for intel vGPU. A possibly
better scope is: add 3 more methods for vgpu create/destroy/reset
respectively, and rename the ops to 'intel_gvt_ops', then pass
it to the MPT module (say the future kvmgt) to use: they are
all methods for external usage.
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Hypervisors are different, the MPT ops is a only superset of
all possibly supported hypervisors. There might be other way
out of the MPT to achieve same target. e.g. vfio-based kvmgt
won't provide map_gfn_to_mfn method to establish guest EPT
mapping for aperture, since it will be done in QEMU/KVM, MMIO
is also trapped elsewhere, etc.
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

GVT host needs init/exit hooks to do some initialization/cleanup
work, e.g.: vfio mdev host device register/unregister.
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Current GVT contains some obsolete logic originally cooked to
support the old, non-vfio kvmgt, which is actually workarounds.
We don't support that anymore, so it's safe to remove it and
make a better framework.
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

By providing predefined vGPU types, users can choose which type a vgpu
to create and use, without specifying detailed parameters.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NJike Song <jike.song@intel.com>

kmap_atomic doesn't allow sleep until unmapped. However,
it's necessary to allow sleep during reading/writing guest
memory, so use kmap instead.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Signed-off-by: NXiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

On guest writing a PPGTT entry, if it contains value and the old
entry is valid, gvt will read it and find & free the corresponding
old data for it. However, with the KVM write protection provided
by page_track, the guest entry will be written with new value
before gvt handling. To avoid that, we should use the shadow
entry instead.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Paulo Bonzini writes:

The three KVM patches that KVMGT needs.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

When we need to reset the global seqno on wraparound, we have to wait
until the current rbtrees are drained (or otherwise the next waiter will
be out of sequence). The current mechanism to kick and spin until
complete, may exit too early as it would break if the target thread was
currently running. Instead, we must wake up the threads, but keep
spinning until the trees have been deleted.

In order to appease Tvrtko, busy spin rather than yield().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108143719.32215-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

This gets rid of a warning that the connectors are used without locking
when doing a nonblocking modeset.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-11-git-send-email-maarten.lankhorst@linux.intel.com

All of this state should be updated as soon as possible. It shouldn't be
done later because then future updates may not depend on it.

Changes since v1:
- Move the modeset update to before drm_atomic_state_get. (Ville)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-10-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

The only user was i915, which is now gone.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com> #irc
Cc: dri-devel@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-9-git-send-email-maarten.lankhorst@linux.intel.com

drm_select_eld requires mode_config.mutex and connection_mutex
because it looks at the connector list and at the legacy encoders.

This is not required, because when we call audio_codec_enable we know
which connector it was called for, so pass the state.

This also removes having to look at crtc->config.

Changes since v1:
- Use intel_crtc->pipe instead of drm_crtc_index. (Ville)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-8-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

This is the last connector still looking at crtc->config. Fix this.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-7-git-send-email-maarten.lankhorst@linux.intel.com

The newly added assert_kernel_context_is_current introduces a warning
when built with W=1:

drivers/gpu/drm/i915/i915_gem.c: In function ‘assert_kernel_context_is_current’:
drivers/gpu/drm/i915/i915_gem.c:4417:63: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body]

Changing the GEM_BUG_ON() macro from an empty definition to "do { } while (0)"
makes the macro more robust to use and avoids the warning.

Fixes: 3033acab ("drm/i915: Queue the idling context switch after all other timelines")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108135834.2166677-1-arnd@arndb.de

gvt-next-2016-11-07

- Fix regression from e95433c7
- Some MMIO handler fixes
- Add better handling for guest reset control
- stratch page table tree for shadow ppgtt
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The code to determine the primary plane offset for gen2/3 looks
different than the code for gen4+, but in fact it's doing the same
thing. Let's make it uniform. Allows us to eliminate the 'obj' from
the list of local variables as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-6-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

intel_cursor_plane_create() and intel_sprite_plane_create() return
an error pointer, so let's not mistakenly look for a NULL pointer.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2016-November/110690.html
Fixes: b079bd17 ("drm/i915: Bail if plane/crtc init fails")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Use the passed in plane_state instead of plane->state in
vlv_update_plane(). Currently the two are one and the same, but if we
start queuing up multiple plane updates they might not be.

Looks like this was rebase fail on my part.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 8d0deca8 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

We always flush the chipset prior to executing with the GPU, so we can
skip the flush during ordinary domain management.

This should help mitigate some of the potential performance regressions,
but likely trivial, from doing the flush unconditionally before execbuf
introduced in commit dcd79934 ("drm/i915: Unconditionally flush any
chipset buffers before execbuf")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161106130001.9509-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Get rid of sloppy inline functions now that we don't have more users:

i915_gem_request_get_seqno
i915_gem_request_get_engine

v2:
- request->engine is always non-NULL (Chris)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478589108-3702-1-git-send-email-joonas.lahtinen@linux.intel.com

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.

v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.

Fixes: 0f71979a ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk

During resume we will reset the SW/HW tracking for each ring head/tail
pointers and so are not prepared to replay any pending requests (as
opposed to GPU reset time). Add an assert for this both to the suspend
and the resume code.

v2:
- Check for ELSP port idle already during suspend and check !gt.awake
  during resume. (Chris)
v3:
- Move the !gt.awake check to i915_gem_resume().
v4:
- s/intel_lr_engines_idle/intel_execlists_idle/ (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-4-git-send-email-imre.deak@intel.com