The spin_unlock call should have been left as-is, revert.

Fixes: b16c2919 ("netfilter: nf_conntrack: use safer way to lock all buckets")
Reported-by: Nkernel test robot <fengguang.wu@intel.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Since bd678e09 ("netfilter: nfnetlink: fix splat due to incorrect
socket memory accounting in skbuff clones"), we don't manually attach
the sk to the skbuff clone anymore, so we have to use the original
skbuff from netlink_ack() which needs to access the sk pointer.

Fixes: bd678e09 ("netfilter: nfnetlink: fix splat due to incorrect socket memory accounting in skbuff clones")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Ulrich reports soft lockup with following (shortened) callchain:

NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s!
__netif_receive_skb_core+0x6e4/0x774
process_backlog+0x94/0x160
net_rx_action+0x88/0x178
call_do_softirq+0x24/0x3c
do_softirq+0x54/0x6c
__local_bh_enable_ip+0x7c/0xbc
nf_ct_iterate_cleanup+0x11c/0x22c [nf_conntrack]
masq_inet_event+0x20/0x30 [nf_nat_masquerade_ipv6]
atomic_notifier_call_chain+0x1c/0x2c
ipv6_del_addr+0x1bc/0x220 [ipv6]

Problem is that nf_ct_iterate_cleanup can run for a very long time
since it can be interrupted by softirq processing.
Moreover, atomic_notifier_call_chain runs with rcu readlock held.

So lets call cond_resched() in nf_ct_iterate_cleanup and defer
the call to a work queue for the atomic_notifier_call_chain case.

We also need another cond_resched in get_next_corpse, since we
have to deal with iter() always returning false, in that case
get_next_corpse will walk entire conntrack table.
Reported-by: NUlrich Weber <uw@ocedo.com>
Tested-by: NUlrich Weber <uw@ocedo.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

RFC 4015 section 3.4 says the TCP sender MUST refrain from
reversing the congestion control state when the ACK signals
congestion through the ECN-Echo flag. Currently we may not
always do that when prior_ssthresh is reset upon receiving
ACKs with ECE marks. This patch fixes that.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

self->ctrl_skb is protected by self->spinlock, we should not
access it out of the lock. Move the debugging printk inside.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the egress interface index specified via IPV6_PKTINFO
is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7
can be subverted when the user space application calls connect()
before sendmsg().
Fix it by initializing properly flowi6_oif in connect() before
performing the route lookup.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current implementation of ip6_dst_lookup_tail basically
ignore the egress ifindex match: if the saddr is set,
ip6_route_output() purposefully ignores flowi6_oif, due
to the commit d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE
flag if saddr set"), if the saddr is 'any' the first route lookup
in ip6_dst_lookup_tail fails, but upon failure a second lookup will
be performed with saddr set, thus ignoring the ifindex constraint.

This commit adds an output route lookup function variant, which
allows the caller to specify lookup flags, and modify
ip6_dst_lookup_tail() to enforce the ifindex match on the second
lookup via said helper.

ip6_route_output() becames now a static inline function build on
top of ip6_route_output_flags(); as a side effect, out-of-tree
modules need now a GPL license to access the output route lookup
functionality.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not trim skb for mmaped socket since its buf size is fixed
and userspace will read as frame which data equals head. mmaped
socket will not call recvmsg, means max_recvmsg_len is 0,
skb_reserve was not called before commit: db65a3aa.

Fixes: db65a3aa (netlink: Trim skb to alloc size to avoid MSG_TRUNC)
Signed-off-by: NKen-ichirou MATSUZAWA <chamas@h4.dion.ne.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fib_table_lookup function had a shift by 32 that triggered a UBSAN
warning.  This was due to the fact that I had placed the shift first and
then followed it with the check for the suffix length to ignore the
undefined behavior.  If we reorder this so that we verify the suffix is
less than 32 before shifting the value we can avoid the issue.
Reported-by: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_PROC_FS, CONFIG_IP_PNP_BOOTP, CONFIG_IP_PNP_DHCP and
CONFIG_IP_PNP_RARP are all disabled, we get a warning about the
ic_proto_used variable being unused:

net/ipv4/ipconfig.c:146:12: error: 'ic_proto_used' defined but not used [-Werror=unused-variable]

This avoids the warning, by making the definition conditional on
whether a dynamic IP configuration protocol is configured. If not,
we know that the value is always zero, so we can optimize away the
variable and all code that depends on it.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are cases where qdisc_dequeue_peeked can return NULL, and the result
is dereferenced later on in the function.

Similarly to the other qdisc dequeue functions, check whether the skb
pointer is NULL and if it is, goto out.
Signed-off-by: NBernie Harris <bernie.harris@alliedtelesis.co.nz>
Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In 'commit 7fe8097c ("tipc: fix nullpointer bug when subscribing
to events")', we terminate the connection if the subscription
creation fails.
In the same commit, the subscription creation result was based on
the value of the subscription pointer (set in the function) instead
of the return code.

Unfortunately, the same function tipc_subscrp_create() handles
subscription cancel request. For a subscription cancellation request,
the subscription pointer cannot be set. Thus if a subscriber has
several subscriptions and cancels any of them, the connection is
terminated.

In this commit, we terminate the connection based on the return value
of tipc_subscrp_create().
Fixes: commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events")
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not assume a valid protocol header is present,
as this is not the case for IPv4 fragments.

Lets avoid extra cache line misses and potential bugs
if we actually find a socket and incorrectly uses its dst.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit cad20c27 was supposed to
fix handling of devices first using public addresses and then
switching to RPAs after pairing. Unfortunately it missed a couple of
key places in the code.

1. When evaluating which devices should be removed from the existing
white list we also need to consider whether we have an IRK for them or
not, i.e. a call to hci_find_irk_by_addr() is needed.

2. In smp_notify_keys() we should not be requiring the knowledge of
the RPA, but should simply keep the IRK around if the other conditions
require it.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.4+

At least the l2cap_add_psm() routine depends on the source address
type being properly set to know what auto-allocation ranges to use, so
the assignment to l2cap_chan needs to happen before this.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The LE dynamic PSM range is different from BR/EDR (0x0080 - 0x00ff)
and doesn't have requirements relating to parity, so separate checks
are needed.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Having proper defines makes the code a bit readable, it also avoids
duplicating hard-coded values since these are also needed when
auto-allocating PSM values (in a subsequent patch).
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

With some combinations of user provided flags in netlink command,
it is possible to call tcp_get_info() with a buffer that is not 8-bytes
aligned.

It does matter on some arches, so we need to use put_unaligned() to
store the u64 fields.

Current iproute2 package does not trigger this particular issue.

Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info")
Fixes: 977cb0ec ("tcp: add pacing_rate information into tcp_info")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When switchdev drivers process FDB notifications from the underlying
device they resolve the netdev to which the entry points to and notify
the bridge using the switchdev notifier.

However, since the RTNL mutex is not held there is nothing preventing
the netdev from disappearing in the middle, which will cause
br_switchdev_event() to dereference a non-existing netdev.

Make switchdev drivers hold the lock at the beginning of the
notification processing session and release it once it ends, after
notifying the bridge.

Also, remove switchdev_mutex and fdb_lock, as they are no longer needed
when RTNL mutex is held.

Fixes: 03bf0c28 ("switchdev: introduce switchdev notifier")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit fixes a corner case in tcp_mark_head_lost() which was
causing the WARN_ON(len > skb->len) in tcp_fragment() to fire.

tcp_mark_head_lost() was assuming that if a packet has
tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of
M*mss bytes, for any M < N. But with the tricky way TCP pcounts are
maintained, this is not always true.

For example, suppose the sender sends 4 1-byte packets and have the
last 3 packet sacked. It will merge the last 3 packets in the write
queue into an skb with pcount = 3 and len = 3 bytes. If another
recovery happens after a sack reneging event, tcp_mark_head_lost()
may attempt to split the skb assuming it has more than 2*MSS bytes.

This sounds very counterintuitive, but as the commit description for
the related commit c0638c24 ("tcp: don't fragment SACKed skbs in
tcp_mark_head_lost()") notes, this is because tcp_shifted_skb()
coalesces adjacent regions of SACKed skbs, and when doing this it
preserves the sum of their packet counts in order to reflect the
real-world dynamics on the wire. The c0638c24 commit tried to
avoid problems by not fragmenting SACKed skbs, since SACKed skbs are
where the non-proportionality between pcount and skb->len/mss is known
to be possible. However, that commit did not handle the case where
during a reneging event one of these weird SACKed skbs becomes an
un-SACKed skb, which tcp_mark_head_lost() can then try to fragment.

The fix is to simply mark the entire skb lost when this happens.
This makes the recovery slightly more aggressive in such corner
cases before we detect reordering. But once we detect reordering
this code path is by-passed because FACK is disabled.
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Later parts of the stack (including fragmentation) expect that there is
never a socket attached to frag in a frag_list, however this invariant
was not enforced on all defrag paths. This could lead to the
BUG_ON(skb->sk) during ip_do_fragment(), as per the call stack at the
end of this commit message.

While the call could be added to openvswitch to fix this particular
error, the head and tail of the frags list are already orphaned
indirectly inside ip_defrag(), so it seems like the remaining fragments
should all be orphaned in all circumstances.

kernel BUG at net/ipv4/ip_output.c:586!
[...]
Call Trace:
 <IRQ>
 [<ffffffffa0205270>] ? do_output.isra.29+0x1b0/0x1b0 [openvswitch]
 [<ffffffffa02167a7>] ovs_fragment+0xcc/0x214 [openvswitch]
 [<ffffffff81667830>] ? dst_discard_out+0x20/0x20
 [<ffffffff81667810>] ? dst_ifdown+0x80/0x80
 [<ffffffffa0212072>] ? find_bucket.isra.2+0x62/0x70 [openvswitch]
 [<ffffffff810e0ba5>] ? mod_timer_pending+0x65/0x210
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffffa03205a2>] ? nf_conntrack_in+0x252/0x500 [nf_conntrack]
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffffa02051a3>] do_output.isra.29+0xe3/0x1b0 [openvswitch]
 [<ffffffffa0206411>] do_execute_actions+0xe11/0x11f0 [openvswitch]
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffffa0206822>] ovs_execute_actions+0x32/0xd0 [openvswitch]
 [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffffa02068a2>] ovs_execute_actions+0xb2/0xd0 [openvswitch]
 [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
 [<ffffffffa0215019>] ? ovs_ct_get_labels+0x49/0x80 [openvswitch]
 [<ffffffffa0213a1d>] ovs_vport_receive+0x5d/0xa0 [openvswitch]
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
 [<ffffffffa02148fc>] internal_dev_xmit+0x6c/0x140 [openvswitch]
 [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
 [<ffffffff81660299>] dev_hard_start_xmit+0x2b9/0x5e0
 [<ffffffff8165fc21>] ? netif_skb_features+0xd1/0x1f0
 [<ffffffff81660f20>] __dev_queue_xmit+0x800/0x930
 [<ffffffff81660770>] ? __dev_queue_xmit+0x50/0x930
 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
 [<ffffffff81669876>] ? neigh_resolve_output+0x106/0x220
 [<ffffffff81661060>] dev_queue_xmit+0x10/0x20
 [<ffffffff816698e8>] neigh_resolve_output+0x178/0x220
 [<ffffffff816a8e6f>] ? ip_finish_output2+0x1ff/0x590
 [<ffffffff816a8e6f>] ip_finish_output2+0x1ff/0x590
 [<ffffffff816a8cee>] ? ip_finish_output2+0x7e/0x590
 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
 [<ffffffff816ab4c0>] ip_output+0x70/0x110
 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70
 [<ffffffff816abf89>] ip_send_skb+0x19/0x40
 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
 [<ffffffff816df21a>] icmp_push_reply+0xea/0x120
 [<ffffffff816df93d>] icmp_reply.constprop.23+0x1ed/0x230
 [<ffffffff816df9ce>] icmp_echo.part.21+0x4e/0x50
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffff810d5f9e>] ? rcu_read_lock_held+0x5e/0x70
 [<ffffffff816dfa06>] icmp_echo+0x36/0x70
 [<ffffffff816e0d11>] icmp_rcv+0x271/0x450
 [<ffffffff816a4ca7>] ip_local_deliver_finish+0x127/0x3a0
 [<ffffffff816a4bc1>] ? ip_local_deliver_finish+0x41/0x3a0
 [<ffffffff816a5160>] ip_local_deliver+0x60/0xd0
 [<ffffffff816a4b80>] ? ip_rcv_finish+0x560/0x560
 [<ffffffff816a46fd>] ip_rcv_finish+0xdd/0x560
 [<ffffffff816a5453>] ip_rcv+0x283/0x3e0
 [<ffffffff810b6302>] ? match_held_lock+0x192/0x200
 [<ffffffff816a4620>] ? inet_del_offload+0x40/0x40
 [<ffffffff8165d062>] __netif_receive_skb_core+0x392/0xae0
 [<ffffffff8165e68e>] ? process_backlog+0x8e/0x230
 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
 [<ffffffff8165d7c8>] __netif_receive_skb+0x18/0x60
 [<ffffffff8165e678>] process_backlog+0x78/0x230
 [<ffffffff8165e6dd>] ? process_backlog+0xdd/0x230
 [<ffffffff8165e355>] net_rx_action+0x155/0x400
 [<ffffffff8106b48c>] __do_softirq+0xcc/0x420
 [<ffffffff816a8e87>] ? ip_finish_output2+0x217/0x590
 [<ffffffff8178e78c>] do_softirq_own_stack+0x1c/0x30
 <EOI>
 [<ffffffff8106b88e>] do_softirq+0x4e/0x60
 [<ffffffff8106b948>] __local_bh_enable_ip+0xa8/0xb0
 [<ffffffff816a8eb0>] ip_finish_output2+0x240/0x590
 [<ffffffff816a9a31>] ? ip_do_fragment+0x831/0x8a0
 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
 [<ffffffff816ab4c0>] ip_output+0x70/0x110
 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70
 [<ffffffff816abf89>] ip_send_skb+0x19/0x40
 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
 [<ffffffff816d55d3>] raw_sendmsg+0x7d3/0xc30
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffff816e7557>] ? inet_sendmsg+0xc7/0x1d0
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffff816e759a>] inet_sendmsg+0x10a/0x1d0
 [<ffffffff816e7495>] ? inet_sendmsg+0x5/0x1d0
 [<ffffffff8163e398>] sock_sendmsg+0x38/0x50
 [<ffffffff8163ec5f>] ___sys_sendmsg+0x25f/0x270
 [<ffffffff811aadad>] ? handle_mm_fault+0x8dd/0x1320
 [<ffffffff8178c147>] ? _raw_spin_unlock+0x27/0x40
 [<ffffffff810529b2>] ? __do_page_fault+0x1e2/0x460
 [<ffffffff81204886>] ? __fget_light+0x66/0x90
 [<ffffffff8163f8e2>] __sys_sendmsg+0x42/0x80
 [<ffffffff8163f932>] SyS_sendmsg+0x12/0x20
 [<ffffffff8178cb17>] entry_SYSCALL_64_fastpath+0x12/0x6f
Code: 00 00 44 89 e0 e9 7c fb ff ff 4c 89 ff e8 e7 e7 ff ff 41 8b 9d 80 00 00 00 2b 5d d4 89 d8 c1 f8 03 0f b7 c0 e9 33 ff ff f
 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48
RIP  [<ffffffff816a9a92>] ip_do_fragment+0x892/0x8a0
 RSP <ffff88006d603170>

Fixes: 7f8a436e ("openvswitch: Add conntrack action")
Signed-off-by: NJoe Stringer <joe@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After we use refcnt to check if transport is alive, the dead can be
removed from sctp_transport.

The traversal of transport_addr_list in procfs dump is using
list_for_each_entry_rcu, no need to check if it has been freed.

sctp_generate_t3_rtx_event and sctp_generate_heartbeat_event is
protected by sock lock, it's not necessary to check dead, either.
also, the timers are cancelled when sctp_transport_free() is
called, that it doesn't wait for refcnt to reach 0 to cancel them.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, before rhashtable, /proc assoc listing was done by
read-locking the entire hash entry and dumping all assocs at once, so we
were sure that the assoc wasn't freed because it wouldn't be possible to
remove it from the hash meanwhile.

Now we use rhashtable to list transports, and dump entries one by one.
That is, now we have to check if the assoc is still a good one, as the
transport we got may be being freed.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now when __sctp_lookup_association is running in BH, it will try to
check if t->dead is set, but meanwhile other CPUs may be freeing this
transport and this assoc and if it happens that
__sctp_lookup_association checked t->dead a bit too early, it may think
that the association is still good while it was already freed.

So we fix this race by using atomic_add_unless in sctp_transport_hold.
After we get one transport from hashtable, we will hold it only when
this transport's refcnt is not 0, so that we can make sure t->asoc
cannot be freed before we hold the asoc again.

Note that sctp association is not freed using RCU so we can't use
atomic_add_unless() with it as it may just be too late for that either.

Fixes: 4f008781 ("sctp: apply rhashtable api to send/recv path")
Reported-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code within wait_event_interruptible() is called with
!TASK_RUNNING, so mustn't call any functions that can sleep,
like mutex_lock().

Since we re-check the list_empty() in a loop after the wait,
it's safe to simply use list_empty() without locking.

This bug has existed forever, but was only discovered now
because all userspace implementations, including the default
'rfkill' tool, use poll() or select() to get a readable fd
before attempting to read.

Cc: stable@vger.kernel.org
Fixes: c64fb016 ("rfkill: create useful userspace interface")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

During a sw scan ieee80211_iface_work ignores work items for all vifs.
However after the scan complete work is requeued only for STA, ADHOC
and MESH iftypes.

This occasionally results in event processing getting delayed/not
processed for iftype AP when it coexists with a STA. This can result
in data halt and eventually disconnection on the AP interface.

Cc: stable@vger.kernel.org
Signed-off-by: NSachin Kulkarni <Sachin.Kulkarni@imgtec.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

When creating a SIT tunnel with ip tunnel, rtnl_link_ops is not set before
ipip6_tunnel_create is called. When register_netdevice is called, there is
no linkinfo attribute in the NEWLINK message because of that.

Setting rtnl_link_ops before calling register_netdevice fixes that.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have
to select CRYPTO_ECHAINIV in order to work properly. This solves the
issues caused by a misconfiguration as described in [1].
The original approach, patching crypto/Kconfig was turned down by
Herbert Xu [2].

[1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html
[2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2Signed-off-by: NThomas Egerer <hakke_007@gmx.de>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch extends commit b93d6471 ("sctp: implement the sender side
for SACK-IMMEDIATELY extension") as it didn't white list
SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be
understood as an invalid flag and returning -EINVAL to the application.

Note that the actual handling of the flag is already there in
sctp_datamsg_from_user().

https://tools.ietf.org/html/rfc7053#section-7

Fixes: b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension")
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dmitry reported a struct pid leak detected by a syzkaller program.

Bug happens in unix_stream_recvmsg() when we break the loop when a
signal is pending, without properly releasing scm.

Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes incorrect handling of the 6lowpan packets that contain
uncompressed IPv6 header.

RFC4944 specifies a special dispatch for 6lowpan to carry uncompressed
IPv6 header. This dispatch (1 byte long) has to be removed during
reception and skb data pointer has to be moved. To correctly point in
the beginning of the IPv6 header the dispatch byte has to be pulled off
before packet can be processed by netif_rx_in().

Test scenario: IPv6 packets are not correctly interpreted by the network
layer when IPv6 header is not compressed (e.g. ICMPv6 Echo Reply is not
propagated correctly to the ICMPv6 layer because the extra byte will make
the header look corrupted).

Similar approach is done for IEEE 802.15.4.
Signed-off-by: NLukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: NGlenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Acked-by: NJukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org # 4.4+

The fixes provided in this patch assigns a valid net_device structure to
skb before dispatching it for further processing.

Scenario #1:
============

Bluetooth 6lowpan receives an uncompressed IPv6 header, and dispatches it
to netif. The following error occurs:

Null pointer dereference error #1 crash log:

[  845.854013] BUG: unable to handle kernel NULL pointer dereference at
               0000000000000048
[  845.855785] IP: [<ffffffff816e3d36>] enqueue_to_backlog+0x56/0x240
...
[  845.909459] Call Trace:
[  845.911678]  [<ffffffff816e3f64>] netif_rx_internal+0x44/0xf0

The first modification fixes the NULL pointer dereference error by
assigning dev to the local_skb in order to set a valid net_device before
processing the skb by netif_rx_ni().

Scenario #2:
============

Bluetooth 6lowpan receives an UDP compressed message which needs further
decompression by nhc_udp. The following error occurs:

Null pointer dereference error #2 crash log:

[   63.295149] BUG: unable to handle kernel NULL pointer dereference at
               0000000000000840
[   63.295931] IP: [<ffffffffc0559540>] udp_uncompress+0x320/0x626
               [nhc_udp]

The second modification fixes the NULL pointer dereference error by
assigning dev to the local_skb in the case of a udp compressed packet.
The 6lowpan udp_uncompress function expects that the net_device is set in
the skb when checking lltype.
Signed-off-by: NGlenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: NLukasz Duda <lukasz.duda@nordicsemi.no>
Acked-by: NJukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org # 4.4+

Neal reported crashes with this stack trace :

 RIP: 0010:[<ffffffff8c57231b>] tcp_v4_send_ack+0x41/0x20f
...
 CR2: 0000000000000018 CR3: 000000044005c000 CR4: 00000000001427e0
...
  [<ffffffff8c57258e>] tcp_v4_reqsk_send_ack+0xa5/0xb4
  [<ffffffff8c1a7caa>] tcp_check_req+0x2ea/0x3e0
  [<ffffffff8c19e420>] tcp_rcv_state_process+0x850/0x2500
  [<ffffffff8c1a6d21>] tcp_v4_do_rcv+0x141/0x330
  [<ffffffff8c56cdb2>] sk_backlog_rcv+0x21/0x30
  [<ffffffff8c098bbd>] tcp_recvmsg+0x75d/0xf90
  [<ffffffff8c0a8700>] inet_recvmsg+0x80/0xa0
  [<ffffffff8c17623e>] sock_aio_read+0xee/0x110
  [<ffffffff8c066fcf>] do_sync_read+0x6f/0xa0
  [<ffffffff8c0673a1>] SyS_read+0x1e1/0x290
  [<ffffffff8c5ca262>] system_call_fastpath+0x16/0x1b

The problem here is the skb we provide to tcp_v4_send_ack() had to
be parked in the backlog of a new TCP fastopen child because this child
was owned by the user at the time an out of window packet arrived.

Before queuing a packet, TCP has to set skb->dev to NULL as the device
could disappear before packet is removed from the queue.

Fix this issue by using the net pointer provided by the socket (being a
timewait or a request socket).

IPv6 is immune to the bug : tcp_v6_send_response() already gets the net
pointer from the socket if provided.

Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path")
Reported-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jerry Chu <hkchu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lorenzo reported that we could not properly find v4mapped sockets
in inet_diag_find_one_icsk(). This patch fixes the issue.
Reported-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GRO is currently not aware of tunnel metadata generated by lightweight
tunnels and stored in the dst. This leads to two possible problems:
 * Incorrectly merging two frames that have different metadata.
 * Leaking of allocated metadata from merged frames.

This avoids those problems by comparing the tunnel information before
merging, similar to how we handle other metadata (such as vlan tags),
and releasing any state when we are done.
Reported-by: NJohn <john.phillips5@hpe.com>
Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.")
Signed-off-by: NJesse Gross <jesse@kernel.org>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we need to lock all buckets in the connection hashtable we'd attempt to
lock 1024 spinlocks, which is way more preemption levels than supported by
the kernel. Furthermore, this behavior was hidden by checking if lockdep is
enabled, and if it was - use only 8 buckets(!).

Fix this by using a global lock and synchronize all buckets on it when we
need to lock them all. This is pretty heavyweight, but is only done when we
need to resize the hashtable, and that doesn't happen often enough (or at all).
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Marc Dionne discovered a NULL pointer dereference when setting
SO_REUSEPORT on a socket after it is bound.
This patch removes the assumption that at least one socket in the
reuseport group is bound with the SO_REUSEPORT option before other
bind calls occur.

Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection")
Reported-by: NMarc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: NCraig Gallek <kraig@google.com>
Tested-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Reviewed-by: NEvgeny Cherkashin <Eugene.Crosser@ru.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using a combination of connected and un-connected sockets, Dmitry
was able to trigger soft lockups with his fuzzer.

The problem is that sockets in the SO_REUSEPORT array might have
different scores.

Right after sk2=socket(), setsockopt(sk2,...,SO_REUSEPORT, on) and
bind(sk2, ...), but _before_ the connect(sk2) is done, sk2 is added into
the soreuseport array, with a score which is smaller than the score of
first socket sk1 found in hash table (I am speaking of the regular UDP
hash table), if sk1 had the connect() done, giving a +8 to its score.

hash bucket [X] -> sk1 -> sk2 -> NULL

sk1 score = 14  (because it did a connect())
sk2 score = 6

SO_REUSEPORT fast selection is an optimization. If it turns out the
score of the selected socket does not match score of first socket, just
fallback to old SO_REUSEPORT logic instead of trying to be too smart.

Normal SO_REUSEPORT users do not mix different kind of sockets, as this
mechanism is used for load balance traffic.

Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Craig Gallek <kraigatgoog@gmail.com>
Acked-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was seen that defective configurations of openvswitch could overwrite
the STACK_END_MAGIC and cause a hard crash of the kernel because of too
many recursions within ovs.

This problem arises due to the high stack usage of openvswitch. The rest
of the kernel is fine with the current limit of 10 (RECURSION_LIMIT).

We use the already existing recursion counter in ovs_execute_actions to
implement an upper bound of 5 recursions.

Cc: Pravin Shelar <pshelar@ovn.org>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Simon Horman <simon.horman@netronome.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>