Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 2月, 2011 2 次提交
    • D
      ipv4: Consolidate all default route selection implementations. · 0c838ff1
      由 David S. Miller 提交于 
      Both fib_trie and fib_hash have a local implementation of
fib_table_select_default().  This is completely unnecessary
code duplication.

Since we now remember the fib_table and the head of the fib
alias list of the default route, we can implement one single
generic version of this routine.

Looking at the fib_hash implementation you may get the impression
that it's possible for there to be multiple top-level routes in
the table for the default route.  The truth is, it isn't, the
insert code will only allow one entry to exist in the zero
prefix hash table, because all keys evaluate to zero and all
keys in a hash table must be unique.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0c838ff1
    • D
      ipv4: Remember FIB alias list head and table in lookup results. · 5b470441
      由 David S. Miller 提交于 
      This will be used later to implement fib_select_default() in a
completely generic manner, instead of the current situation where the
default route is re-looked up in the TRIE/HASH table and then the
available aliases are analyzed.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5b470441
  3. 29 1月, 2011 2 次提交
  5. 14 1月, 2011 1 次提交
    • P
      netfilter: fix Kconfig dependencies · c7066f70
      由 Patrick McHardy 提交于 
      Fix dependencies of netfilter realm match: it depends on NET_CLS_ROUTE,
which itself depends on NET_SCHED; this dependency is missing from netfilter.

Since matching on realms is also useful without having NET_SCHED enabled and
the option really only controls whether the tclassid member is included in
route and dst entries, rename the config option to IP_ROUTE_CLASSID and move
it outside of traffic scheduling context to get rid of the NET_SCHED dependeny.
Reported-by: NVladis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
      c7066f70
  7. 18 11月, 2010 1 次提交
  9. 21 10月, 2010 1 次提交
  11. 19 10月, 2010 1 次提交
  13. 06 10月, 2010 1 次提交
    • E
      fib: RCU conversion of fib_lookup() · ebc0ffae
      由 Eric Dumazet 提交于 
      fib_lookup() converted to be called in RCU protected context, no
reference taken and released on a contended cache line (fib_clntref)

fib_table_lookup() and fib_semantic_match() get an additional parameter.

struct fib_info gets an rcu_head field, and is freed after an rcu grace
period.

Stress test :
(Sending 160.000.000 UDP frames on same neighbour,
IP route cache disabled, dual E5540 @2.53GHz,
32bit kernel, FIB_HASH) (about same results for FIB_TRIE)

Before patch :

real	1m31.199s
user	0m13.761s
sys	23m24.780s

After patch:

real	1m5.375s
user	0m14.997s
sys	15m50.115s

Before patch Profile :

13044.00 15.4% __ip_route_output_key vmlinux
 8438.00 10.0% dst_destroy           vmlinux
 5983.00  7.1% fib_semantic_match    vmlinux
 5410.00  6.4% fib_rules_lookup      vmlinux
 4803.00  5.7% neigh_lookup          vmlinux
 4420.00  5.2% _raw_spin_lock        vmlinux
 3883.00  4.6% rt_set_nexthop        vmlinux
 3261.00  3.9% _raw_read_lock        vmlinux
 2794.00  3.3% fib_table_lookup      vmlinux
 2374.00  2.8% neigh_resolve_output  vmlinux
 2153.00  2.5% dst_alloc             vmlinux
 1502.00  1.8% _raw_read_lock_bh     vmlinux
 1484.00  1.8% kmem_cache_alloc      vmlinux
 1407.00  1.7% eth_header            vmlinux
 1406.00  1.7% ipv4_dst_destroy      vmlinux
 1298.00  1.5% __copy_from_user_ll   vmlinux
 1174.00  1.4% dev_queue_xmit        vmlinux
 1000.00  1.2% ip_output             vmlinux

After patch Profile :

13712.00 15.8% dst_destroy             vmlinux
 8548.00  9.9% __ip_route_output_key   vmlinux
 7017.00  8.1% neigh_lookup            vmlinux
 4554.00  5.3% fib_semantic_match      vmlinux
 4067.00  4.7% _raw_read_lock          vmlinux
 3491.00  4.0% dst_alloc               vmlinux
 3186.00  3.7% neigh_resolve_output    vmlinux
 3103.00  3.6% fib_table_lookup        vmlinux
 2098.00  2.4% _raw_read_lock_bh       vmlinux
 2081.00  2.4% kmem_cache_alloc        vmlinux
 2013.00  2.3% _raw_spin_lock          vmlinux
 1763.00  2.0% __copy_from_user_ll     vmlinux
 1763.00  2.0% ip_output               vmlinux
 1761.00  2.0% ipv4_dst_destroy        vmlinux
 1631.00  1.9% eth_header              vmlinux
 1440.00  1.7% _raw_read_unlock_bh     vmlinux

Reference results, if IP route cache is enabled :

real	0m29.718s
user	0m10.845s
sys	7m37.341s

25213.00 29.5% __ip_route_output_key   vmlinux
 9011.00 10.5% dst_release             vmlinux
 4817.00  5.6% ip_push_pending_frames  vmlinux
 4232.00  5.0% ip_finish_output        vmlinux
 3940.00  4.6% udp_sendmsg             vmlinux
 3730.00  4.4% __copy_from_user_ll     vmlinux
 3716.00  4.4% ip_route_output_flow    vmlinux
 2451.00  2.9% __xfrm_lookup           vmlinux
 2221.00  2.6% ip_append_data          vmlinux
 1718.00  2.0% _raw_spin_lock_bh       vmlinux
 1655.00  1.9% __alloc_skb             vmlinux
 1572.00  1.8% sock_wfree              vmlinux
 1345.00  1.6% kfree                   vmlinux
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ebc0ffae
  15. 05 10月, 2010 1 次提交
  17. 30 3月, 2010 1 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      由 Tejun Heo 提交于 
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  19. 05 2月, 2010 1 次提交
  21. 15 1月, 2010 1 次提交
  23. 26 11月, 2009 1 次提交
  25. 19 5月, 2009 1 次提交
  27. 25 2月, 2009 1 次提交
    • P
      netlink: change nlmsg_notify() return value logic · 1ce85fe4
      由 Pablo Neira Ayuso 提交于 
      This patch changes the return value of nlmsg_notify() as follows:

If NETLINK_BROADCAST_ERROR is set by any of the listeners and
an error in the delivery happened, return the broadcast error;
else if there are no listeners apart from the socket that
requested a change with the echo flag, return the result of the
unicast notification. Thus, with this patch, the unicast
notification is handled in the same way of a broadcast listener
that has set the NETLINK_BROADCAST_ERROR socket flag.

This patch is useful in case that the caller of nlmsg_notify()
wants to know the result of the delivery of a netlink notification
(including the broadcast delivery) and take any action in case
that the delivery failed. For example, ctnetlink can drop packets
if the event delivery failed to provide reliable logging and
state-synchronization at the cost of dropping packets.

This patch also modifies the rtnetlink code to ignore the return
value of rtnl_notify() in all callers. The function rtnl_notify()
(before this patch) returned the error of the unicast notification
which makes rtnl_set_sk_err() reports errors to all listeners. This
is not of any help since the origin of the change (the socket that
requested the echoing) notices the ENOBUFS error if the notification
fails and should resync itself.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1ce85fe4
  29. 03 11月, 2008 1 次提交
  31. 12 6月, 2008 1 次提交
  33. 11 6月, 2008 1 次提交
  35. 16 4月, 2008 1 次提交
  37. 01 2月, 2008 3 次提交
  39. 29 1月, 2008 10 次提交
  41. 11 10月, 2007 2 次提交
    • T
      [NETLINK]: Introduce nested and byteorder flag to netlink attribute · 8f4c1f9b
      由 Thomas Graf 提交于 
      This change allows the generic attribute interface to be used within
the netfilter subsystem where this flag was initially introduced.

The byte-order flag is yet unused, it's intended use is to
allow automatic byte order convertions for all atomic types.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8f4c1f9b
    • E
      [NET]: Make the device list and device lookups per namespace. · 881d966b
      由 Eric W. Biederman 提交于 
      This patch makes most of the generic device layer network
namespace safe.  This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables.  The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl

were modified to take a network namespace argument, and
deal with it.

vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.

So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces.  The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace.  This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.

For now the ifindex generator is left global.

Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.

At the same time there are assumptions in the network stack
that the ifindex of a network device won't change.  Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      881d966b
  43. 11 7月, 2007 1 次提交
  45. 25 5月, 2007 1 次提交
  47. 26 4月, 2007 1 次提交
  49. 26 3月, 2007 1 次提交
  51. 11 2月, 2007 1 次提交