This patch modifies the -I/--int-regs option to enablepassing the name
of the registers to sample on interrupt. Registers can be specified by
their symbolic names. For instance on x86, --intr-regs=ax,si.

The motivation is to reduce the size of the perf.data file and the
overhead of sampling by only collecting the registers useful to a
specific analysis. For instance, for value profiling, sampling only the
registers used to passed arguements to functions.

With no parameter, the --intr-regs still records all possible registers
based on the architecture.

To name registers, it is necessary to use the long form of the option,
i.e., --intr-regs:

  $ perf record --intr-regs=si,di,r8,r9 .....

To record any possible registers:

  $ perf record -I .....
  $ perf report --intr-regs ...

To display the register, one can use perf report -D

To list the available registers:

  $ perf record --intr-regs=\?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Signed-off-by: NStephane Eranian <eranian@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds a way to locate a register identifier (PERF_X86_REG_*)
based on its name, e.g., AX.

This will be used by a subsequent patch to improved flexibility of perf
record.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-3-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds the output of the interrupted machine state (iregs) to
perf script. It presents them  as NAME:VALUE so this is easy to parse
during post processing.

To capture the interrupted machine state:
   $ perf record -I ....

to display iregs, use the -F option:

   $ perf script -F ip,iregs
   40afc2   AX:0x6c5770    BX:0x1e    CX:0x5f4d80a    DX:0x101010101010101    SI:0x1
Signed-off-by: NStephane Eranian <eranian@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-2-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

An evsel may have different cpus and threads than the evlist it is in.

Use it's own cpus and threads, when opening the evsel in 'perf record'.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440138194-17001-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before this patch there's no way to connect a loaded bpf object
to its source file. However, during applying perf's '--filter' to BPF
object, without this connection makes things harder, because perf loads
all programs together, but '--filter' setting is for each object.

The API of bpf_object__open_buffer() is changed to allow passing a name.
Fortunately, at this time there's only one user of it (perf test LLVM),
so we change it together.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440742821-44548-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is theoretically possible to process perf.data files created on x86
and that contain Intel PT or Intel BTS data, on any other architecture,
which is why it is possible for there to be build errors on powerpc
caused by pt/bts.

The errors were:

	util/intel-pt-decoder/intel-pt-insn-decoder.c: In function ‘intel_pt_insn_decoder’:
	util/intel-pt-decoder/intel-pt-insn-decoder.c:138:3: error: switch missing default case [-Werror=switch-default]
	   switch (insn->immediate.nbytes) {
	   ^
	cc1: all warnings being treated as errors

	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_synth_branch_sample':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:871: undefined reference to `tsc_to_perf_time'
	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_sample':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:915: undefined reference to `tsc_to_perf_time'
	sources/linux-acme.git/tools/perf/util/intel-pt.c:962: undefined reference to `tsc_to_perf_time'
	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_process_event':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:1454: undefined reference to `perf_time_to_tsc'
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441046384-28663-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add backpointer to perf_env in evlist, so we can easily access env when
processing something where we have a evsel or evlist.
Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440755289-30939-5-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As it is not necessarily tied to a perf.data file and needs using in
places where a perf_session is not required.
Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440755289-30939-4-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The tracing_events_path is the variable we want to change via
--debugfs-dir option, not the debugfs_mountpoint.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1440596813-12844-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's no need for find_tracing_dir, because perf already searches for
debugfs/tracefs mount on start and populate tracing_events_path.

Adding tracing_path to carry tracing dir string to be used in
get_tracing_file instead of calling find_tracing_dir.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1440596813-12844-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introduce sysfs/filename__sprintf_build_id for consolidating similar
code.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150815114259.13642.34685.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that functions that deal primarily with an evsel to access
information that concerns the whole evlist it is in.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440677263-21954-5-git-send-email-kan.liang@intel.comSigned-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5yqtfs728r1j1u8zmg8ufxwm@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch creates a new script (compaction-times) to report time
spent in mm compaction. It is possible to report times in nanoseconds
(default) or microseconds (-u).

The option -p will break down results by process id, -pv will further
decompose by each compaction entry/exit.

For each compaction entry/exit what is reported is controlled by the
options:

  -t   report only timing
  -m   report migration stats
  -ms  report migration scanner stats
  -fs  report free scanner stats

The default is to report all.

Entries may be further filtered by pid, pid-range or comm (regex).

The script is useful when analysing workloads that compact memory. The
most common example will be THP allocations on systems with a lot of
uptime that has fragmented memory.

This is an example of using the script to analyse a thpscale from
mmtests which deliberately fragments memory and allocates THP in 4
separate threads

  # Recording step, one of the following;
  $ perf record -e 'compaction:mm_compaction_*' ./workload
  # or:
  $ perf script record compaction-times

  # Reporting: basic
  total: 2444505743ns migration: moved=357738 failed=39275
  free_scanner: scanned=2705578 isolated=387875
  migration_scanner: scanned=414426 isolated=397013

  # Reporting: Per task stall times
  $ perf script report compaction-times -- -t -p
  total: 2444505743ns
  6384[thpscale]: 740800017ns
  6385[thpscale]: 274119512ns
  6386[thpscale]: 832961337ns
  6383[thpscale]: 596624877ns

  # Reporting: Per-compaction attempts for task 6385
  $ perf script report compaction-times -- -m -pv 6385
  total: 274119512ns migration: moved=14893 failed=24285
  6385[thpscale]: 274119512ns migration: moved=14893 failed=24285
  6385[thpscale].1: 3033277ns migration: moved=511 failed=1
  6385[thpscale].2: 9592094ns migration: moved=1524 failed=12
  6385[thpscale].3: 2495587ns migration: moved=512 failed=0
  6385[thpscale].4: 2561766ns migration: moved=512 failed=0
  6385[thpscale].5: 2523521ns migration: moved=512 failed=0
  ..... output continues ...

Changes since v1:
- report stats for isolate_migratepages and isolate_freepages
  (Vlastimil Babka)
- refactor code to achieve above
- add help text
- output to stdout/stderr explicitly
Signed-off-by: NTony Jones <tonyj@suse.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/1439840932-8933-1-git-send-email-tonyj@suse.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

print_aggr() fails to print per-core/per-socket statistics after commit
582ec082 ("perf stat: Fix per-socket output bug for uncore events")
if events have differnt cpus. Because in print_aggr(), aggr_get_id needs
index (not cpu id) to find core/pkg id. Also, evsel cpu maps should be
used to get aggregated id.

Here is an example:

Counting events cycles,uncore_imc_0/cas_count_read/. (Uncore event has
cpumask 0,18)

  $ perf stat -e cycles,uncore_imc_0/cas_count_read/ -C0,18 --per-core sleep 2

Without this patch, it failes to get CPU 18 result.

   Performance counter stats for 'CPU(s) 0,18':

  S0-C0           1            7526851      cycles
  S0-C0           1               1.05 MiB  uncore_imc_0/cas_count_read/
  S1-C0           0      <not counted>      cycles
  S1-C0           0      <not counted> MiB  uncore_imc_0/cas_count_read/

With this patch, it can get both CPU0 and CPU18 result.

   Performance counter stats for 'CPU(s) 0,18':

  S0-C0           1            6327768      cycles
  S0-C0           1               0.47 MiB  uncore_imc_0/cas_count_read/
  S1-C0           1             330228      cycles
  S1-C0           1               0.29 MiB  uncore_imc_0/cas_count_read/
Signed-off-by: NKan Liang <kan.liang@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NStephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 582ec082 ("perf stat: Fix per-socket output bug for uncore events")
Link: http://lkml.kernel.org/r/1435820925-51091-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It was reported that "%-8s" does not parse well when used in the printk
format. The '-' is what is throwing it off. Allow that to be included.

Reporter note:

Example before:

  transhuge-stres-10730 [004]  5897.713989: mm_compaction_finished: node=0
  zone=>-<8s order=-2119871790 ret=

Example after:

  transhuge-stres-4235  [000]   453.149280: mm_compaction_finished: node=0
  zone=ffffffff81815d7a order=9 ret=

(I will send patches to fix the string handling in the tracepoints so
it's on par with in-kernel printing via trace_pipe:)

  transhuge-stres-10921 [007] ...1  6307.140205: mm_compaction_finished: node=0
  zone=Normal   order=9 ret=partial
Reported-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Tested-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150827094601.46518bcc@gandalf.local.homeSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Sometimes when post-processing output from `perf script` one does not
want to demangle C++ symbol names. Add an option to allow this.

Also add --[no-]demangle-kernel to be consistent with top/report/probe.
Signed-off-by: NMark Drayton <mbd@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440616695-32340-1-git-send-email-scientist@fb.comSigned-off-by: NYannick Brosseau <scientist@fb.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It should be useful to allow 'perf probe' probe at absolute offset of a
target. For example, when (u)probing at a instruction of a shared object
in a embedded system where debuginfo is not avaliable but we know the
offset of that instruction by manually digging.

This patch enables following perf probe command syntax:

  # perf probe 0xffffffff811e6615

And

  # perf probe /lib/x86_64-linux-gnu/libc-2.19.so 0xeb860

In the above example, we don't need a anchor symbol, so it is possible
to compute absolute addresses using other methods and then use 'perf
probe' to create the probing points.

v1 -> v2:
  Drop the leading '+' in cmdline;
  Allow uprobing at offset 0x0;
  Improve 'perf probe -l' result when uprobe at area without debuginfo.

v2 -> v3:
  Split bugfix to a separated patch.

Test result:

  # perf probe 0xffffffff8119d175 %ax
  # perf probe sys_write %ax
  # perf probe /lib64/libc-2.18.so 0x0 %ax
  # perf probe /lib64/libc-2.18.so 0x5 %ax
  # perf probe /lib64/libc-2.18.so 0xd8e40 %ax
  # perf probe /lib64/libc-2.18.so __write %ax
  # perf probe /lib64/libc-2.18.so 0xd8e49 %ax
  # cat /sys/kernel/debug/tracing/uprobe_events

  p:probe_libc/abs_0 /lib64/libc-2.18.so:0x          (null) arg1=%ax
  p:probe_libc/abs_5 /lib64/libc-2.18.so:0x0000000000000005 arg1=%ax
  p:probe_libc/abs_d8e40 /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax
  p:probe_libc/__write /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax
  p:probe_libc/abs_d8e49 /lib64/libc-2.18.so:0x00000000000d8e49 arg1=%ax

  # cat /sys/kernel/debug/tracing/kprobe_events

  p:probe/abs_ffffffff8119d175 0xffffffff8119d175 arg1=%ax
  p:probe/sys_write _text+1692016 arg1=%ax

  # perf probe -l

  Failed to find debug information for address 5
    probe:abs_ffffffff8119d175 (on sys_write+5 with arg1)
    probe:sys_write      (on sys_write with arg1)
    probe_libc:__write   (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1)
    probe_libc:abs_0     (on 0x0 in /lib64/libc-2.18.so with arg1)
    probe_libc:abs_5     (on 0x5 in /lib64/libc-2.18.so with arg1)
    probe_libc:abs_d8e40 (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1)
    probe_libc:abs_d8e49 (on __GI___libc_write+9 in /lib64/libc-2.18.so with arg1)
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-7-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch fixes a bug that, when offset is provided but function is
lost, parse_perf_probe_point() will give a "" string as function name,
so the checking code at the end of parse_perf_probe_point() become
useless.  For example:

  # perf probe +0x1234
  Failed to find symbol  in kernel
    Error: Failed to add events.

After this patch:

  # perf probe +0x1234
  Semantic error :Offset requires an entry function.
    Error: Command Parse Error.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-6-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When manually added uprobe point with zero address, 'perf probe -l'
reports error. For example:

  # echo p:probe_libc/abs_0 /path/to/lib.bin:0x0 arg1=%ax > \
           /sys/kernel/debug/tracing/uprobe_events

  # perf probe -l
  Error: Failed to show event list.

Probing at 0x0 is possible and useful when lib.bin is not a normal
shared object but is manually mapped. However, in this case kernel
report:

  # cat /sys/kernel/debug/tracing/uprobe_events
  p:probe_libc/abs_0 /path/to/lib.bin:0x          (null) arg1=%ax

This patch supports the above kernel output.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-5-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'perf probe -l' reports error if it is unable find symbol through
address. Here is an example.

  # echo 'p:probe_libc/abs_5 /lib64/libc.so.6:0x5' >
          /sys/kernel/debug/tracing/uprobe_events
  # cat /sys/kernel/debug/tracing/uprobe_events
   p:probe_libc/abs_5 /lib64/libc.so.6:0x0000000000000005
  # perf probe -l
    Error: Failed to show event list

Also, this situation triggers a logical inconsistency in
convert_to_perf_probe_point() that, it returns ENOMEM but actually it
never try strdup().

This patch removes !tp->module && !is_kprobe condition, so it always
uses address to build function name if symbol not found.

Test result:

  # perf probe -l
    probe_libc:abs_5     (on 0x5 in /lib64/libc.so.6)
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-4-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's sometimes useful to specify the object affiliation to multiple
config options like:

  libperf-$(CONFIG_X86) += tsc.o
  libperf-$(CONFIG_AUXTRACE) += tsc.o

while the object itself is linked only once. Adding the support for this
and ignoring duplicate objects in the object list.
Suggested-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150826130103.GF22670@krava.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We don't carry an export.h wrapper anymore, remove it from the MANIFEST
file to avoid breaking the make perf-tar targets.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150826080750.GD22670@krava.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'perf probe -l' panic if there is a manually inserted probing point with
absolute address. For example:

  # echo 'p:probe/abs_ffffffff811e6615 0xffffffff811e6615' > /sys/kernel/debug/tracing/kprobe_events
  # perf probe -l
  Segmentation fault (core dumped)

This patch fix this problem by considering the situation that
"tp->symbol == NULL" in find_perf_probe_point_from_dwarf() and
find_perf_probe_point_from_map().

After this patch:

  # perf probe -l
  probe:abs_ffffffff811e6615 (on SyS_write+5@fs/read_write.c)

And when debug info is missing:

  # rm -rf ~/.debug
  # mv /lib/modules/4.2.0-rc1+/build/vmlinux /lib/modules/4.2.0-rc1+/build/vmlinux.bak
  # perf probe -l
  probe:abs_ffffffff811e6615 (on sys_write+5)
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440509256-193590-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Recent changes to rbtree.h may break compilation. There is no
reason to use a liblockdep specific header to begin with, so
we'll use the one shared with all other tools/.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1440479985-6696-3-git-send-email-sasha.levin@oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

As Peter Zijlstra pointed out, the varargs for WARN() are
optional, so we need to correctly handle the case where they
don't exist.

This would cause a compilation error.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1440479985-6696-2-git-send-email-sasha.levin@oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit 3f735377 ("tools: Copy lib/rbtree.c to tools/lib/") has
removed export.h, which was still in use by liblockdep. Restore
it.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1440479985-6696-1-git-send-email-sasha.levin@oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Update Intel PT documentation to describe new features.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-26-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A TRACESTOP packet is produced when an Intel PT trace enters a defined
region of the address space at which point the tracing stops.

This patch just adds decoder support.

Support for specifying TRACESTOP regions is left until later.

For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-25-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

CYC packets are a new Intel PT feature.

CYC packets provide even finer grain timestamp information than MTC and
TSC packets.  A CYC packet contains the number of CPU cycles since the
last CYC packet. Unlike MTC and TSC packets, CYC packets are only sent
when another packet is also sent.

Support for this feature is indicated by:

/sys/bus/event_source/devices/intel_pt/caps/psb_cyc

which contains "1" if the feature is supported and "0" otherwise.

CYC packets can be requested using a PMU config term e.g. perf record -e
intel_pt/cyc/u sleep 1

The frequency of CYC packets can also be specified.  e.g. perf record -e
intel_pt/cyc,cyc_thresh=2/u sleep 1

CYC packets are not requested by default.

Valid cyc_thresh values are given by:

/sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds

which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.

The value represents the minimum number of CPU cycles that must have
passed before a CYC packet can be sent.  The number of CPU cycles is:

    2 ^ (value - 1)

e.g. value 4 means 8 CPU cycles must pass before a CYC packet can be
sent.  Note a CYC packet is still only sent when another packet is sent,
not at, e.g. every 8 CPU cycles.

If an invalid value is entered, the error message will give a list of
valid values e.g.

    $ perf record -e intel_pt/cyc,cyc_thresh=15/u uname
    Invalid cyc_thresh for intel_pt. Valid values are: 0-12

tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.

For more information refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-24-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

CYC packets provide even finer grain timestamp information than MTC and
TSC packets.  A CYC packet contains the number of CPU cycles since the
last CYC packet.

This patch just adds decoder support.  The CPU frequency can be related
to TSC using the Maximum Non-Turbo Ratio in combination with the CBR
(core-to-bus ratio) packet.  However more accuracy is achieved by simply
interpolating the number of cycles between other timing packets like MTC
or TSC.  This patch takes the latter approach.

Support for a default value and validation of values is provided by a
later patch. Also documentation is updated in a separate patch.

For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-23-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

MTC packets are a new Intel PT feature.

MTC packets provide finer grain timestamp information than TSC packets.

Support for this feature is indicated by:

  /sys/bus/event_source/devices/intel_pt/caps/mtc

which contains "1" if the feature is supported and "0" otherwise.

MTC packets can be requested using a PMU config term e.g. perf record -e
intel_pt/mtc/u sleep 1

The frequency of MTC packets can also be specified.  e.g. perf record -e
intel_pt/mtc,mtc_period=2/u sleep 1

The default value is 3 or the nearest lower value that is supported.  0
is always supported.

Valid values are given by:

/sys/bus/event_source/devices/intel_pt/caps/mtc_periods

which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.

The value is converted to the MTC frequency as:

	CTC-frequency / (2 ^ value)

e.g. value 3 means one eighth of CTC-frequency

Where CTC is the hardware crystal clock, the frequency of which can be
related to TSC via values provided in cpuid leaf 0x15.

If an invalid value is entered, the error message will give a list of
valid values e.g.

	$ perf record -e intel_pt/mtc_period=15/u uname
	Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9

tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.

For more information refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-22-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

MTC packets provide finer grain timestamp information than TSC packets.
MTC packets record time using the hardware crystal clock (CTC) which is
related to TSC packets using a TMA packet.

This patch just adds decoder support.

Support for a default value and validation of values is provided by a
later patch. Also documentation is updated in a separate patch.

For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-21-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Record additional information in the AUXTRACE_INFO event in preparation
for decoding MTC and CYC packets.  Pass the information to the decoder.

The AUXTRACE_INFO record can be extended by using the size to indicate
the presence of new members.

The additional information includes PMU config bit positions and the TSC
to CTC (hardware crystal clock) ratio needed to decode MTC packets.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-20-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

New features have been added to Intel PT which include a number of new
packet definitions.

This patch adds packet definitions for new packets: TMA, MTC, CYC, VMCS,
TRACESTOP and MNT.  Also another bit in PIP is defined.

This patch only adds support for the definitions. Later patches add
support for decoding TMA, MTC, CYC and TRACESTOP which is where those
packets are explained.

VMCS and the newly defined bit in PIP are used with virtualization which
is not supported yet.  MNT is a maintenance packet which the decoder
should ignore.

For details, refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-19-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The PSB packet is a synchronization packet that provides a starting
point for decoding or recovery from errors.

This patch adds support for a new Intel PT feature that allows the
frequency of PSB packets to be specified.

Support for this feature is indicated by
/sys/bus/event_source/devices/intel_pt/caps/psb_cyc which contains "1"
if the feature is supported and "0" otherwise.

The PSB period can be specified as a PMU config term e.g. perf record -e
intel_pt/psb_period=2/u sleep 1

The default value is 3 or the nearest lower value that is supported.  0
is always supported.

Valid values are given by:

/sys/bus/event_source/devices/intel_pt/caps/psb_periods

which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.

The value is converted to the approximate number of trace bytes between
PSB packets as:

	2 ^ (value + 11)

e.g. value 3 means 16KiB bytes between PSBs

If an invalid value is entered, the error message will give a list of
valid values e.g.

	$ perf record -e intel_pt/psb_period=15/u uname
	Invalid psb_period for intel_pt. Valid values are: 0-5

tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.

For more information about PSB periods refer to the Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace from June 2015 or
later.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-18-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The period on synthesized 'instructions' samples was being set to a
fixed value, whereas the correct value is the number of instructions
since the last sample, which is a value that the decoder can provide.
So do it that way.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-14-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were depending on the next screen operation after a flush() being
one that would redraw the whole screen so that the progress bar would
be overwritten, when that didn't happen a screen artifact of, say, a
error dialog window would be overlaid on top of the progress bar, fix
it by calling ui_browser__finish(), that now has a TUI implementation.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-el0fyw6duemnx62lydjzhs8c@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we can erase the progress bar after we're done with it, avoiding
things like:

-------------------------------------------------------------------

          ┌─Error:──────────────────────────────────────────────────────┐
          │Can't annotate unmapped_area_topdown:                        │
          │                                                             │
          │No vmlinux file with build id a826726b5ddacfab1f0bade868f1a79│
          │was found in the path.                                       │
          │                                                             │
          │Note that annotation using /proc/kcore requires CAP_SYS_RAWIO│
┌Processin│                                                             │──┐
│         │Please use:                                                  │  │
└─────────│                                                             │──┘
          │  perf buildid-cache -vu vmlinux                             │
          │                                                             │
          │or:                                                          │
          │                                                             │
          │  --vmlinux vmlinux                                          │
          │                                                             │
          │                                                             │
          │Press any key...                                             │
          └─────────────────────────────────────────────────────────────┘

Can't annotate unmapped_area_topdown:
-------------------------------------------------------------------

I.e. that finished progress bar behind the error window. It is not a
problem when we end up redrawing the whole screen, but its ugly when
we present such error windows, provide a TUI method so that code like
the above may avoid this situation, as will be done with the annotation
code in the next cset.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qvktnojzwwe37pweging058t@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'annotate' tool does some filtering in the entries in a DSO but
forgot to reset the cache done in dso__find_symbol(), cauxing a SEGV:

  [root@zoo ~]# perf annotate netlink_poll
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x526ceb]
  /lib64/libc.so.6(+0x34960)[0x7faedfbe0960]
  perf(rb_erase+0x223)[0x499d63]
  perf[0x4213e9]
  perf[0x4bc123]
  perf[0x4bc621]
  perf[0x4bf26b]
  perf[0x4bc855]
  perf(perf_session__process_events+0x340)[0x4bddc0]
  perf(cmd_annotate+0x6bb)[0x421b5b]
  perf[0x479063]
  perf(main+0x60a)[0x42098a]
  /lib64/libc.so.6(__libc_start_main+0xf0)[0x7faedfbcbfe0]
  perf[0x420aa9]
  [0x0]
  [root@zoo ~]#

Fix it by reseting the find cache when removing symbols.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: b685ac22 ("perf symbols: Add front end cache for DSO symbol lookup")
Link: http://lkml.kernel.org/n/tip-b2y9x46y0t8yem1ive41zqyp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>