Use instead the copy just made to tools/include/linux/.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q736w12nwy98x5ox2hamp5ow@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There is code in tools/ that is directly including this file from the
kernel, and this is verboten for a while, copy it so that the next csets
can fix this situation.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e0r3nks2uai020ndghvxv5qw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit a6745330 ("tools lib traceevent: Split pevent_print_event()
into specific functionality functions") broke apart the function
pevent_print_event() into three functions.

The first function prints the comm, pid and CPU, the second prints the
timestamp.

But that commit added the printing of the CPU in the timestamp function,
which now causes pevent_print_event() to duplicate the CPU output.

Remove the redundant printing of the record's CPU from the timestamp
function.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a6745330 ("tools lib traceevent: Split pevent_print_event() into specific functionality functions")
Link: http://lkml.kernel.org/r/20160323101628.459375d2@gandalf.local.homeSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-w246stf7ponfamclsai6b9zo@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This should die altogether, but for now lets remove a bit of this stuff,
as it is not used at all.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ade3n99xscldhg5mx2vzd8p3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-elxg25jd4dhwod4wqbko87qh@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since none of the perf_event fields are used anymore, just the
perf_sample ones, and since this resolves to (map, symbol) from data
structures within struct thread, rename it to thread__resolve and make
the argument ordering similar to the one in machine__resolve().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2b33hs9bp550tezzlhl4kejh@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since we only deal with fields in the passed struct perf_sample move
this method to struct machine, that is where the perf_sample fields
will be resolved to a struct addr_location, i.e. thread, map, symbol,
etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-a1ww2lbm2vbuqsv4p7ilubu9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To avoid parsing event->header.misc in many locations.

This will also allow setting perf.sample.{ip,cpumode} in a single place,
from tracepoint fields, as needed by 'perf kvm' with PPC guests, where
the guest hardware counters is not available at the host.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qp3yradhyt6q3wl895b1aat0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It _will_ be used, no sense in receiving it and nor fowarding it along.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ht8v5et209wuoh5o6nh9pzyq@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

All over the tree.

Cc: David Ahern <dsahern@gmail.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-8nzhnokxyp8y4v7gf0j00oyb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Correctly document what is implemented for :ppp on Intel CPUs in recent
kernels.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1458575793-12091-2-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Comparing bits and bytes in numa benchmark assertion

I hit the issue on two socket Power8 machine presenting its numa nodes
as 0,1,16,17 (according to numactl). Therefore I got error (and hang of
parent process):

    perf: bench/numa.c:296: bind_to_memnode: Assertion `!(g->p.nr_nodes > (int)sizeof(nodemask))' failed.

This is obviously false positive. We can fit all the 18 nodes into
bitfield of 8 bytes (long on 64b architecture).
Signed-off-by: NJakub Jelen <jakuje@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jakub Jelen <jjelen@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Link: http://lkml.kernel.org/r/1458388687-24421-1-git-send-email-jakuje@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Store DSO's .text offset into DSO, used for VDSOs and will also be used for
other needs, like handling kernel modules.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-2-git-send-email-wangnan0@huawei.com
[ Extracted from larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As it is used by several other tools, better move it outside tools/perf.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-34s9kue3xq9w5mijdmfrfx8s@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The topology test case of 'perf test' seems to be broken on my x86
system - due to the comparison of a "core-id" with # of CPUs online.

There are 8 online CPUs:

	$ cat /sys/devices/system/cpu/online
	0-7

but core-ids are not sequential and some core-ids exceed the number
of online CPUs.

	$ cat /sys/devices/system/cpu/cpu?/topology/core_id
	0
	1
	9
	10
	0
	1
	9
	10

Looks like we can safely remove the check.  Output before:

	$ perf --version
	perf version 4.4.rc1.g34258a

	$ perf test -v topo
	36: Test topology in session                                 :
	--- start ---
	test child forked, pid 5906
	templ file: /tmp/perf-test-vCwWG3
	core_id number is too big.You may need to upgrade the perf tool.
	test child interrupted
	---- end ----
	Test topology in session: FAILED!

and after:

	$ perf test -v topo
	36: Test topology in session                                 :
	--- start ---
	test child forked, pid 6532
	templ file: /tmp/perf-test-y10wFJ
	CPU 0, core 0, socket 0
	CPU 1, core 1, socket 0
	CPU 2, core 9, socket 0
	CPU 3, core 10, socket 0
	CPU 4, core 0, socket 1
	CPU 5, core 1, socket 1
	CPU 6, core 9, socket 1
	CPU 7, core 10, socket 1
	test child finished with 0
	---- end ----
	Test topology in session: Ok
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/20151203233219.GA27696@us.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20160310' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Implement 'perf stat --metric-only' (Andi Kleen)

  - Fix perf script python database export crash (Chris Phlipot)

Infrastructure changes:

  - perf top/report --hierarchy assorted fixes for problems introduced in this
    perf/core cycle (Namhyung Kim)

  - Support '~' operation in libtraceevent (Steven Rosted)

Build fixes:

  - Fix bulding of jitdump on opensuse on ubuntu systems when the DWARF
    devel files are not installed (Arnaldo Carvalho de Melo)

  - Do not try building jitdump on unsupported arches (Jiri Olsa)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Add metric only support for -A too. This requires a new print function
that prints the metrics in the right order.

v2: Fix manpage
v3: Simplify nrcpus computation
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a new mode to only print metrics. Sometimes we don't care about the
raw values, just want the computed metrics. This allows more compact
printing, so with -I each sample is only a single line.  This also
allows easier plotting and processing with other tools.

The main target is with using --topdown, but it also works with -T and
standard perf stat. A few metrics are not supported.

To avoiding having to hardcode all the metrics in the code it uses a two
pass approach: first compute dummy metrics and only print the headers in
the print_metric callback. Then use the callback to print the actual
values.

There are some additional changes in the stat printout code to handle
all metrics being on a single line.

One issue is that the column code doesn't know in advance what events
are not supported by the CPU, and it would be hard to find out as this
could change based on dynamic conditions. That causes empty columns in
some cases.

The output can be fairly wide, often you may need more than 80 columns.

Example:

% perf stat -a -I 1000 --metric-only
     1.001452803 frontend cycles idle insn per cycle       stalled cycles per insn branch-misses of all branches
     1.001452803  158.91%               0.66                2.39                    2.92%
     2.002192321  180.63%               0.76                2.08                    2.96%
     3.003088282  150.59%               0.62                2.57                    2.84%
     4.004369835  196.20%               0.98                1.62                    3.79%
     5.005227314  231.98%               0.84                1.90                    4.71%

v2: Lots of updates.
v3: Use slightly narrower columns
v4: Add comment
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With all the recently added fields in the perf stat CSV output we should
finally document them in the man page. Do this here.

v2: Fix fields in documentation (Jiri)
v3: fix order of fields again (Jiri)
v4: Change order again.
v5: Document more fields (Jiri)
v6: Move time stamp first
v7: More fixes (Jiri)
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The context menu in TUI hists browser checks corresponding sort keys
when creating the menu item.  But hotkey actions lacks these checks so
it can filter using incorrect info.

For example, default sort key of 'perf top' doesn't contain 'comm' or
'pid' sort key so each hist entry's thread info is not reliable.  Thus
it should prohibit using thread filter on 't' key.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit 2eafd410 ("perf hists browser: Only 'Zoom into thread'
only when sort order has 'pid'") disabled thread filtering in hist
browser for the default sort key.  However the he->thread is still valid
even if 'pid' sort key is not given.  Only thing it should not use is
the pid (or tid) of the thread.  So allow to filter by thread when
'comm' sort key is given and show pid only if 'pid' sort key is given.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The sort__has_comm variable is to check whether the comm sort key is
given.  This is necessary to support thread filtering in the TUI hists
browser later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When hierarchy mode is enabled, each entry in a hierarchy level shares
the period.  IOW an upper level entry's period is the sum of lower level
entries.  Thus perf uses only one of them to calculate the total period
of hists.  It was lowest-level (leaf) entries but it has a problem when
it comes to filters.

If a filter is applied, entries in the same level will be filtered or
not.  But upper level entries still have period of their sum including
filtered one.  So total sum of upper level entries will not be same as
sum of lower level entries.

This resulted in entries having more than 100% of overhead and it can be
produced using perf top with filter(s).
Reported-and-Tested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The nr_sort_keys field is to carry the number of sort entries in a
hpp_list or hists to determine the depth of indentation of a hist entry.
As it's only used in hierarchy mode and now we have used nr_hpp_node for
this reason, there's no need to keep it anymore.  Let's get rid of it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The hist_browser__fprintf_hierarchy_entry() if to dump current output
into a file so it needs to be sync-ed with the corresponding function
hist_browser__show_hierarchy_entry().  So use hists->nr_hpp_node to
indent width and use first fmt_node to print overhead columns instead of
checking whether it's a sort entry (or dynamic entry).
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-6-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's not used anymore and the output format is accessed by the hpp_list
pointer instead when hierarchy is enabled.  Let's get rid of it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When a command-line filter is applied in hierarchy mode, output is
broken especially when filtering on lower level.  The higher level
entries doesn't show up so it's hard to see the results.

Also it needs to handle multi sort keys in a single hierarchy level.

Before:

  $ perf report --hierarchy -s 'cpu,{dso,comm}' --comms swapper --stdio
  ...
  #    Overhead  CPU / Shared Object+Command
  # ...........  ...........................
  #
         13.79%     [kernel.vmlinux]  swapper
      31.71%     000
         13.80%     [kernel.vmlinux]  swapper
          0.43%     [e1000e]          swapper
         11.89%     [kernel.vmlinux]  swapper
          9.18%     [kernel.vmlinux]  swapper

After:

  #    Overhead  CPU / Shared Object+Command
  # ...........  ...............................
  #
      33.09%     003
         13.79%     [kernel.vmlinux]  swapper
      31.71%     000
         13.80%     [kernel.vmlinux]  swapper
          0.43%     [e1000e]          swapper
      21.90%     002
         11.89%     [kernel.vmlinux]  swapper
      13.30%     001
          9.18%     [kernel.vmlinux]  swapper
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Those functions are for checkinf if a given perf_hpp_fmt is a
filter-related sort entry.  With hierarchy mode, it needs to check
filters on the hist entries with its own hpp format list.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When hierarchy mode is enabled each output format is in a separate hpp
list.  So when applying a filter it should check all formats in the
list.  Currently it only checks a single ->fmt field which was not set
properly.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Build jitdump only on architectures defined in util/genelf.h file, to avoid
breaking the build on such arches.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160310164113.GA11357@krava.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When evaluating values for print flags, if the value included a '~'
operator, the parsing would fail. This broke kmalloc's parsing of:

__print_flags(REC->gfp_flags, "|", {(unsigned
long)((((((( gfp_t)(0x400000u|0x2000000u)) | (( gfp_t)0x40u) |
(( gfp_t)0x80u) | (( gfp_t)0x20000u)) | (( gfp_t)0x02u)) |
(( gfp_t)0x08u)) | (( gfp_t)0x4000u) | (( gfp_t)0x10000u) |
(( gfp_t)0x1000u) | (( gfp_t)0x200u)) & ~(( gfp_t)0x2000000u))
                                        ^
                                        |
                                      here
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160226181328.22f47129@gandalf.local.homeSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's no need to use a const char pointer, we can used char pointer
from the beginning and omit the unnecessary cast.
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160308184230.GB7897@krava.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pass perf_hpp_list all the way through setup_sort_list so that the sort
entry can be added on the arbitrary list.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160309100417.GA30910@krava.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Remove the union in evsel so that the database id and priv pointer can
be used simultainously without conflicting and crashing.

Detailed Description for the fixed bug follows:

perf script crashes with a segmentation fault on user space tool version
4.5.rc7.ge2857b when using the python database export API. It works
properly in 4.4 and prior versions.

the crash fist appeared in:

cfc8874a ("perf script: Process cpu/threads maps")

How to reproduce the bug:

Remove any temporary files left over from a previous crash (if you have
already attemped to reproduce the bug):

  $ rm -r test_db-perf-data
  $ dropdb test_db

  $ perf record timeout 1 yes >/dev/null
  $ perf script -s scripts/python/export-to-postgresql.py test_db

  Stack Trace:
  Program received signal SIGSEGV, Segmentation fault.
  __GI___libc_free (mem=0x1) at malloc.c:2929
  2929	malloc.c: No such file or directory.
  (gdb) bt
    at util/stat.c:122
    argv=<optimized out>, prefix=<optimized out>) at builtin-script.c:2231
    argc=argc@entry=4, argv=argv@entry=0x7fffffffdf70) at perf.c:390
    at perf.c:451
Signed-off-by: NChris Phlipot <cphlipot0@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: cfc8874a ("perf script: Process cpu/threads maps")
Link: http://lkml.kernel.org/r/1457500314-8912-1-git-send-email-cphlipot0@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While building on a Docker container for ubuntu and installing package
by package one ends up with:

    MKDIR    /tmp/build/util/
    CC       /tmp/build/util/genelf.o
  util/genelf.c:22:19: fatal error: dwarf.h: No such file or directory
   #include <dwarf.h>
                   ^
  compilation terminated.
  mv: cannot stat '/tmp/build/util/.genelf.o.tmp': No such file or directory

Because the jitdump code needs the DWARF related development packages to
be installed. So make it dependent on that so that the build can succeed
without jitdump support.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-le498robnmxd40237wej3w62@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The following upcoming upstream commit:

  92b0729c ("x86/mm, x86/mce: Add memcpy_mcsafe()")

Adds _ASM_EXTABLE_FAULT(), which is not available in user-space
and breaks the build.

We don't really need _ASM_EXTABLE_FAULT() in user-space, so simply
wrap it to nothing.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Drop the quirk() function pointer in favor of a simple boolean which
says whether the quirk should be applied or not. Update comment while at
it.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20160308164041.GF16568@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>

ignore_nmis is used in two distinct places:

 1. modified through {stop,restart}_nmi by alternative_instructions
 2. read by do_nmi to determine if default_do_nmi should be called or not

thus the access pattern conforms to __read_mostly and do_nmi() is a fastpath.
Signed-off-by: NKostenzer Felix <fkostenzer@live.at>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>