- 11 3月, 2015 3 次提交
-
-
由 Kuninori Morimoto 提交于
Renesas sound driver needs SSI/SRC/DVC regmaps, but it didn't have regmap_config::name for devm_regmap_init_mmio(). Thus, debugfs initialization code tried to use same driver name many times, and failed. This patch adds eacy own name for regmap_config::name Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound driver needs 1st/2nd DMA interface, and 1st DMA is using DMAEngine, and 2nd is using local method now. 2nd DMA had been DMAEngine, but it was moved to local method by previous patchset. But then, it lost PIO mode fallback when probe. this patch recovers it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Geert Uytterhoeven 提交于
sound/soc/sh/rcar/dma.c: In function 'rsnd_dmapp_init': sound/soc/sh/rcar/dma.c:341:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] dev_dbg(dev, "id/src/dst/chcr = %d/%x/%x/%08x\n", ^ sound/soc/sh/rcar/dma.c:341:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] Fixes: 288f392e ("ASoC: rsnd: add Audio DMAC peri peri support rework") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 07 3月, 2015 24 次提交
-
-
由 Kuninori Morimoto 提交于
Current rsnd driver supports reg-names, and Audio DMAC peri peri. This patch adds sample code for it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd driver supports Audio DMAC (via DMAEngine) / Audio DMAC peri peri (via rsnd driver) now. This patch adds DT binding sample code on DT binging text Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
cfcefe01 (ASoC: rsnd: add recovery support for under/over flow error on SRC) added SRC recovery support which needs IRQ. This patch adds SRC irq sample code on DT bingdings text Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
This patch adds rsnd_dvc_of_node() to get DVC subnode from DT. This is prepare for new DT bindings for 1st DMAC Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
This patch adds rsnd_src_of_node() to get SRC subnode from DT. This is prepare for new DT bindings for 1st DMAC Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
This patch adds rsnd_ssi_of_node() to get SSI subnode from DT. This is prepare for new DT bindings for 1st DMAC Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas R-Car sound driver uses SSI, but the DMA interfaces are SSI/SSIU. This interface is based on SSI/SRC/DVC connection. And DMA function needs to know which interface is used somehow. This patch enables rsnd_ssi_use_busif() for DMA. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas R-Car needs 2 DMACs.1st DMAC is DMAEngine, and 2nd DMAC is implemented as local code. These 2 DMACs are never shared. We can use union for these. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
DMAEngine direction can be calculated from rsnd_dai_stream, So, rsnd_dma::dir does not make sense now. Let's remove it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
DMAEngine for Renesas R-Car driver is used only for Audio DMAC now. rsnd_dma::addr was added to support Audio DMAC peri peri, but it is no longer needed. Let's remove it Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. Audio DMAC peri peri is controlled from sound driver without DMAEngine by this patch. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd driver needs to care about Audio DAMC (via DMAEngine), Audio DMAC peri peri (via local method) on rsnd driver. This patch adds new rsnd_dma_ops and care it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Now, we have dma.c for Audio DMAC / Audio DMAC peri peri. rsnd_gen_dma_addr() should go there. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound driver had been assumed that Audio DMAC / Audio DMAC peri peri are implemented by DMAEngine. But, result of DMA ML discussion, it was concluded that it is not a general purpose DMAC. And it should be moved from current DMAEngine to rsnd driver. So, Audio DMAC peri peri become non DMAEngine. OTOH, ALSA SoC has soc-generic-dmaengine-pcm implementation. but it seems difficult to use this generic implementation on rsnd driver at this point, since it needs to fallback to PIO mode if DMA can't use. and additionally it needs 2 DMAC (= Audio DMAC / Audio DMAC peri peri). These are not "generic" feature. Of course I will try to use this generic dmaengine in the future somehow, but just use current style at this point until it can formally use 2 DMACs. This patch adds new dma.c and moves current dma code to dma.c from core.c. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
physical address is required from Audio DMAC peri peri. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd driver needs to support Audio DMAC peri peri inside sound driver. getting resource by name is useful for it Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
priv is not used on rsnd_dma_quit() Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd_dma_available() is not used. Let's remove it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
It can get DMA direction via rsnd_dai_stream. Remove un-needed is_play from rsnd_dma_init(). Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas R-Car sound had SH-DMA-BASE specific implementation before, but, now, it is no longer needed. Let's remove it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current DMAEngine implementation of DT bindings can't support DT subnode. This patch export symbols of of_dma_request_slave_channel() for subnode DMA DT bingings. ex) rcar_sound: rcar_sound@ec500000 { ... rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; dvc1: dvc@1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; ... }; Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 23 2月, 2015 13 次提交
-
-
由 Linus Torvalds 提交于
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fix from Russell King: "Just one fix this time around. __iommu_alloc_buffer() can cause a BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or __GFP_HIGHMEM set. The patch from Alexandre addresses this" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
-
由 Al Viro 提交于
X-Coverup: just ask spender Cc: stable@vger.kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Cc: stable@vger.kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Cc: stable@vger.kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Konstantin Khlebnikov 提交于
I've noticed significant locking contention in memory reclaimer around sb_lock inside grab_super_passive(). Grab_super_passive() is called from two places: in icache/dcache shrinkers (function super_cache_scan) and from writeback (function __writeback_inodes_wb). Both are required for progress in memory allocator. Grab_super_passive() acquires sb_lock to increment sb->s_count and check sb->s_instances. It seems sb->s_umount locked for read is enough here: super-block deactivation always runs under sb->s_umount locked for write. Protecting super-block itself isn't a problem: in super_cache_scan() sb is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers are still active. Inside writeback super-block comes from inode from bdi writeback list under wb->list_lock. This patch removes locking sb_lock and checks s_instances under s_umount: generic_shutdown_super() unlinks it under sb->s_umount locked for write. New variant is called trylock_super() and since it only locks semaphore, callers must call up_read(&sb->s_umount) instead of drop_super(sb) when they're done. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup() rather than d_is_dir() when checking a dir watch and give an error on fake directories. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-