- 26 2月, 2014 5 次提交
-
-
由 Jarkko Nikula 提交于
Use more sensible kcontrol names than "Int Mic" and "Ext Spk". Speakers especially are usually integrated devices in sales models. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwoood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Dan Carpenter 提交于
This should be sizeof(pos) instead of sizeof(&pos). Most likely they are both 8 bytes though so it doesn't often make a difference in real life. Fixes: 22981243 ('ASoC: Intel: Add Haswell/Broadwell IPC') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Dan Carpenter 提交于
This should be spin_unlock_irqrestore() instead of spin_unlock() Fixes: 22981243 ('ASoC: Intel: Add Haswell/Broadwell IPC') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Dan Carpenter 提交于
There were some curly braces intended here, but the code actually works the same either way so it's not a bug. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
I swear I tested missing firmware in commit e5161d79 ("ASoC: Intel: sst-acpi: Request firmware before SST platform driver probing"). Unfortunately same wasn't done in commit 6dda27cb ("ASoC: Intel: sst-acpi: Add support for multiple machine drivers per platform") which will cause NULL pointer dereference in sst_acpi_fw_cb() when printing the error since sst_acpi->mach is not set. Fix this obvious error by setting the sst_acpi->mach in sst_acpi_probe(). Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 25 2月, 2014 7 次提交
-
-
由 Jarkko Nikula 提交于
Enable build support for Baytrail SST DSP platform and byt-rt5640 machine drivers. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
Add Baytrail SST descriptor with the byt-rt5640 machine driver to sst-acpi loader. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
Add machine driver for Baytrail SST DSP platform with RT5640 audio codec. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
This adds the Baytrail SST DSP PCM platform driver. It registers itself with the ALSA SoC layer and uses Intel Baytrail SST DSP IPC for DSP control. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
Add support for Baytrail SST DSP IPC. This provides mechanism to communicate with the DSP firmware. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
This adds basic functionality for Baytrail SST DSP initialization and firmware loading. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
While the SHIM register addresses in Baytrail are the same than Haswell and Broadwell their register size is 64-bit and some bits are different. This patch adds the SST device ID for Baytrail and Baytrail specific SHIM bit definitions. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 22 2月, 2014 6 次提交
-
-
由 Liam Girdwood 提交于
Add support for Haswell based machines with SST DSP audio. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Build the Haswell/Broadwell PCM, IPC and DSP drivers. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Provide a trace mechanism for debugging Haswell/Broadwell specific SST IPC messages. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Add the Haswell and Broadwell PCM DSP platform driver. This driver uses the IPC driver for communication with the SST DSP. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Add support for Haswell and Broadwell DSP IPC. This is used by the DSP platform PCM driver to configure the DSP for audio operations. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Add support for low level differentiation functions for Haswell and Broadwell SST DSPs. This includes suppoprt for DSP boot and reset, DSP firmware module parsing and DSP memory block map initialisation. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 20 2月, 2014 2 次提交
-
-
由 Liam Girdwood 提交于
Disable build on non X86 architectures except for compile testing. This fixes the following build errors on PPC and adds an option for testing the build on other architectures as suggested by Mark Brown :- sound/soc/intel/sst-dsp.c: In function 'sst_dsp_outbox_write': sound/soc/intel/sst-dsp.c:218:2: error: implicit declaration of function 'memcpy_toio' [-Werror=implicit-function-declaration] memcpy_toio(sst->mailbox.out_base, message, bytes); ^ sound/soc/intel/sst-dsp.c: In function 'sst_dsp_outbox_read': sound/soc/intel/sst-dsp.c:231:2: error: implicit declaration of function 'memcpy_fromio' [-Werror=implicit-function-declaration] memcpy_fromio(message, sst->mailbox.out_base, bytes); ^ Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
Initial implementation of this driver focused only matching SST ACPI ID with single machine driver and same firmware file per platform. It was known restriction to be improved incrementally. This patch is now changing this that SST ACPI ID refers purely to platform specific data which refers to machine drivers on this platform, not vice versa. Matching machine driver is found by looking at ACPI ID which would best match with the driver. Typically this would be the ACPI ID of audio codec but is not tied to it. This patch also changes that DSP firmware name is machine not platform specific. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 19 2月, 2014 5 次提交
-
-
由 Liam Girdwood 提交于
Sparse gives us the following warnings on sst-firmware.c CHECK sound/soc/intel/sst-firmware.c sound/soc/intel/sst-firmware.c:39:34: warning: incorrect type in argument 1 (different address spaces) sound/soc/intel/sst-firmware.c:39:34: expected void volatile [noderef] <asn:2>*dst sound/soc/intel/sst-firmware.c:39:34: got void * sound/soc/intel/sst-firmware.c:417:36: warning: incorrect type in argument 1 (different address spaces) sound/soc/intel/sst-firmware.c:417:36: expected void *dest sound/soc/intel/sst-firmware.c:417:36: got void [noderef] <asn:2>* sound/soc/intel/sst-firmware.c:430:5: warning: symbol 'sst_block_module_remove' was not declared. Should it be static? and CC [M] sound/soc/intel/sst-dsp.o sound/soc/intel/sst-dsp-priv.h:271:53: warning: incorrect type in argument 3 (different address spaces) sound/soc/intel/sst-dsp-priv.h:271:53: expected void *src sound/soc/intel/sst-dsp-priv.h:271:53: got void [noderef] <asn:2>* sound/soc/intel/sst-dsp-priv.h:271:53: warning: incorrect type in argument 3 (different address spaces) sound/soc/intel/sst-dsp-priv.h:271:53: expected void *src sound/soc/intel/sst-dsp-priv.h:271:53: got void [noderef] <asn:2>* sound/soc/intel/sst-dsp-priv.h:271:53: warning: incorrect type in argument 3 (different address spaces) sound/soc/intel/sst-dsp-priv.h:271:53: expected void *src sound/soc/intel/sst-dsp-priv.h:271:53: got void [noderef] <asn:2>* This patch removes these warnings Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
We originally thought to request SST audio DSP firmware during the SST platform driver initialization. However plain request_firmware doesn't work in driver probe paths if userspace is not ready to handle it. For instance when drivers are built-in. Implementing asynchronous firmware request in SST platform driver initialization complicates code needlessly since it anyway will fail if firmware is missing. This is more simple to handle by requesting firmware asynchronously in sst_acpi_probe() and register SST platform only after firmware is loaded. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
Move fw_base and fw_size fields in struct sst_pdata under ACPI data for clarifying that these are not related to firmware file but for platform specific extended firmware area reserved by the BIOS. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
The Intel audio DSP SST trace event header has been renamed from sst.h to intel-sst.h in order to avoid any confusion with any future Samoa Standard Time drivers ;) Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Add GFP_KERNEL when allocating firmware DMA buffer. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 18 2月, 2014 5 次提交
-
-
由 Liam Girdwood 提交于
This adds kernel build support for Intel SST core audio. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Provide a trace mechanism for debugging generic SST IPC messages. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Provide services for Intel SST drivers to load SST modular firmware. SST Firmware can be made up of several modules. These modules can exist within any of the compatible SST memory blocks. Provide a generic memory block and firmware module manager that can be used with any SST firmware and core. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
Most of the SST devices will be exposed as ACPI devices. It makes sense to avoid duplication of the driver enumeration logic and concentrate the functionality into a single ACPI SST enumeration file. Idea of this loader is to parse data we get from ACPI and to be able to load needed other SST drivers and ASoC machine driver runtime based on single ACPI ID what BIOS gives to us. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Add support for Intel Smart Sound Technology (SST) audio DSPs. This driver provides the low level IO, reset, boot and IRQ management for Intel audio DSPs. These files make up the low level part of the SST audio driver stack and will be used by many Intel SST cores like Haswell, Broadwell and Baytrail. SST DSPs expose a memory mapped region (shim) for config and control. The shim layout is mostly shared without much modification across cores and this driver provides a uniform API to access the shim and to enable basic shim functions. It also provides functionality to abstract some shim functions for cores with different shim features. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 12 2月, 2014 1 次提交
-
-
由 Liam Girdwood 提交于
Resent with correct email for Mark. In order to differentiate the different Intel SST audio core drivers we need to rename the current drivers with a mfld prefix. This also includes renaming in the Makefile and Kconfig Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 03 2月, 2014 9 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: "The three major changes in this patchset is a implementation for flexible userspace memory maps, cache-flushing fixes (again), and a long-discussed ABI change to make EWOULDBLOCK the same value as EAGAIN. parisc has been the only platform where we had EWOULDBLOCK != EAGAIN to keep HP-UX compatibility. Since we will probably never implement full HP-UX support, we prefer to drop this compatibility to make it easier for us with Linux userspace programs which mostly never checked for both values. We don't expect major fall-outs because of this change, and if we face some, we will simply rebuild the necessary applications in the debian archives" * 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: add flexible mmap memory layout support parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc parisc: convert uapi/asm/stat.h to use native types only parisc: wire up sched_setattr and sched_getattr parisc: fix cache-flushing parisc/sti_console: prefer Linux fonts over built-in ROM fonts
-
由 Mikulas Patocka 提交于
HPFS needs to load 4 consecutive 512-byte sectors when accessing the directory nodes or bitmaps. We can't switch to 2048-byte block size because files are allocated in the units of 512-byte sectors. Previously, the driver would allocate a 2048-byte area using kmalloc, copy the data from four buffers to this area and eventually copy them back if they were modified. In the current implementation of the buffer cache, buffers are allocated in the pagecache. That means that 4 consecutive 512-byte buffers are stored in consecutive areas in the kernel address space. So, we don't need to allocate extra memory and copy the content of the buffers there. This patch optimizes the code to avoid copying the buffers. It checks if the four buffers are stored in contiguous memory - if they are not, it falls back to allocating a 2048-byte area and copying data there. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Previously, hpfs scanned all bitmaps each time the user asked for free space using statfs. This patch changes it so that hpfs scans the bitmaps only once, remembes the free space and on next invocation of statfs it returns the value instantly. New versions of wine are hammering on the statfs syscall very heavily, making some games unplayable when they're stored on hpfs, with load times in minutes. This should be backported to the stable kernels because it fixes user-visible problem (excessive level load times in wine). Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Helge Deller 提交于
Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Guy Martin 提交于
On Linux, only parisc uses a different value for EWOULDBLOCK which causes a lot of troubles for applications not checking for both values. Since the hpux compat is long dead, make EWOULDBLOCK behave the same as all other architectures. Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
The stat.h header file is exported to userspace. Some userspace applications failed to compile due to missing/unknown types, so we better convert it to use native types only (like it's done on other architectures too). Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
This commit: f8dae006: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: NHelge Deller <deller@gmx.de>
-