Introduced in: c52b12ed, when this sequence:

  count[0] = count[1] = count[2] = 0;

Was replaced with:

  aggr->val = 0;

Which is equivalent to zeroing just the first entry in the 'count'
array.

Fix it by zeroing the three entries with:

  aggr->val = aggr->ena = aggr->run = 0;
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is quite possible for the event to have been disabled between
perf_event_read() sending the IPI and the CPU servicing the IPI and
calling __perf_event_read(), hence revalidate the state.
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
[ add {}'s to fix a warning ]
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-3-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If it was not possible to enable watchdog for any cpu, switch
watchdog_enabled back to 0, because it's visible via
kernel.watchdog sysctl.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Passing nowatchdog to kernel disables 2 things: creation of
watchdog threads AND initialization of percpu watchdog_hrtimer.
As hrtimers are initialized only at boot it's not possible to
enable watchdog later - for me all watchdog threads started to
eat 100% of CPU time, but they could just crash.

Additionally, even if these threads would start properly,
watchdog_disable_all_cpus was guarded by no_watchdog check, so
you couldn't disable watchdog.

To fix this, remove no_watchdog variable and use already
existing watchdog_enabled variable.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
[ removed another no_watchdog instance ]
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes some issues with raw event validation on
Pentium 4 (Netburst) based processors.

As I was testing libpfm4 Netburst support, I ran into two
problems in the p4_validate_raw_event() function:

   - the shared field must be checked ONLY when HT is on
   - the binding to ESCR register was missing

The second item was causing raw events to not be encoded
correctly compared to generic PMU events.

With this patch, I can now pass Netburst events to libpfm4
examples and get meaningful results:

  $ task -e global_power_events:running:u  noploop 1
  noploop for 1 seconds
  3,206,304,898 global_power_events:running
Signed-off-by: NStephane Eranian <eranian@google.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: peterz@infradead.org
Cc: paulus@samba.org
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: perfmon2-devel@lists.sf.net
Cc: eranian@gmail.com
Cc: robert.richter@amd.com
Cc: acme@redhat.com
Cc: gorcunov@gmail.com
Cc: ming.m.lin@intel.com
LKML-Reference: <4d3efb2f.1252d80a.1a80.ffffc83f@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit 927c7a9e ("perf: Fix race in callchains") introduced
a mismatch in the sizing of struct callchain_cpus_entries.

nr_cpu_ids must be used instead of num_possible_cpus(), or we
might get out of bound memory accesses on some machines.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Stephane Eranian <eranian@google.com>
CC: stable@kernel.org
LKML-Reference: <1295980851.3588.351.camel@edumazet-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - pass touch resolution to clients through input_absinfo
  Input: wacom - add 2 Bamboo Pen and touch models
  Input: sysrq - ensure sysrq_enabled and __sysrq_enabled are consistent
  Input: sparse-keymap - fix KEY_VSW handling in sparse_keymap_setup
  Input: tegra-kbc - add tegra keyboard driver
  Input: gpio_keys - switch to using request_any_context_irq
  Input: serio - allow registered drivers to get status flag
  Input: ct82710c - return proper error code for ct82c710_open
  Input: bu21013_ts - added regulator support
  Input: bu21013_ts - remove duplicate resolution parameters
  Input: tnetv107x-ts - don't treat NULL clk as an error
  Input: tnetv107x-keypad - don't treat NULL clk as an error

Fix up trivial conflicts in drivers/input/keyboard/Makefile due to
additions of tc3589x/Tegra drivers

Also remove fake ABS_RX/ABS_RY "axes" that were used to report physical
dimensions now that we have better way.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The -rt patches change the console_semaphore to console_mutex.  As a
result, a quite large chunk of the patches changes all
acquire/release_console_sem() to acquire/release_console_mutex()

This commit makes things use more neutral function names which dont make
implications about the underlying lock.

The only real change is the return value of console_trylock which is
inverted from try_acquire_console_sem()

This patch also paves the way to switching console_sem from a semaphore to
a mutex.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert]
Signed-off-by: NTorben Hohn <torbenh@gmx.de>
Cc: Thomas Gleixner <tglx@tglx.de>
Cc: Greg KH <gregkh@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix potential use of uninitialised variable caused by recent
decompressor code optimisations.

In zlib_uncompress (zlib_wrapper.c) we have

	int zlib_err, zlib_init = 0;
	...
	do {
		...
			if (avail == 0) {
				offset = 0;
				put_bh(bh[k++]);
				continue;
			}
		...
		zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
		...
	} while (zlib_err == Z_OK);

If continue is executed (avail == 0) then the while condition will be
evaluated testing zlib_err, which is uninitialised first time around the
loop.

Fix this by getting rid of the 'if (avail == 0)' condition test, this
edge condition should not be being handled in the decompressor code, and
instead handle it generically in the caller code.

Similarly for xz_wrapper.c.

Incidentally, on most architectures (bar Mips and Parisc), no
uninitialised variable warning is generated by gcc, this is because the
while condition test on continue is optimised out and not performed
(when executing continue zlib_err has not been changed since entering
the loop, and logically if the while condition was true previously, then
it's still true).
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>
Reported-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Executed command: fsstress -d /mnt -n 600 -p 850

  crash> bt
  PID: 7947   TASK: ffff880160546a70  CPU: 0   COMMAND: "fsstress"
   #0 [ffff8800dfc07d00] machine_kexec at ffffffff81030db9
   #1 [ffff8800dfc07d70] crash_kexec at ffffffff810a7952
   #2 [ffff8800dfc07e40] oops_end at ffffffff814aa7c8
   #3 [ffff8800dfc07e70] die_nmi at ffffffff814aa969
   #4 [ffff8800dfc07ea0] do_nmi_callback at ffffffff8102b07b
   #5 [ffff8800dfc07f10] do_nmi at ffffffff814aa514
   #6 [ffff8800dfc07f50] nmi at ffffffff814a9d60
      [exception RIP: __lookup_tag+100]
      RIP: ffffffff812274b4  RSP: ffff88016056b998  RFLAGS: 00000287
      RAX: 0000000000000000  RBX: 0000000000000002  RCX: 0000000000000006
      RDX: 000000000000001d  RSI: ffff88016056bb18  RDI: ffff8800c85366e0
      RBP: ffff88016056b9c8   R8: ffff88016056b9e8   R9: 0000000000000000
      R10: 000000000000000e  R11: ffff8800c8536908  R12: 0000000000000010
      R13: 0000000000000040  R14: ffffffffffffffc0  R15: ffff8800c85366e0
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  <NMI exception stack>
   #7 [ffff88016056b998] __lookup_tag at ffffffff812274b4
   #8 [ffff88016056b9d0] radix_tree_gang_lookup_tag_slot at ffffffff81227605
   #9 [ffff88016056ba20] find_get_pages_tag at ffffffff810fc110
  #10 [ffff88016056ba80] pagevec_lookup_tag at ffffffff81105e85
  #11 [ffff88016056baa0] write_cache_pages at ffffffff81104c47
  #12 [ffff88016056bbd0] generic_writepages at ffffffff81105014
  #13 [ffff88016056bbe0] do_writepages at ffffffff81105055
  #14 [ffff88016056bbf0] __filemap_fdatawrite_range at ffffffff810fb2cb
  #15 [ffff88016056bc40] filemap_write_and_wait_range at ffffffff810fb32a
  #16 [ffff88016056bc70] generic_file_direct_write at ffffffff810fb3dc
  #17 [ffff88016056bce0] __generic_file_aio_write at ffffffff810fcee5
  #18 [ffff88016056bda0] generic_file_aio_write at ffffffff810fd085
  #19 [ffff88016056bdf0] do_sync_write at ffffffff8114f9ea
  #20 [ffff88016056bf00] vfs_write at ffffffff8114fcf8
  #21 [ffff88016056bf30] sys_write at ffffffff81150691
  #22 [ffff88016056bf80] system_call_fastpath at ffffffff8100c0b2

I think this root cause is the following:

 radix_tree_range_tag_if_tagged() always tags the root tag with settag
 if the root tag is set with iftag even if there are no iftag tags
 in the specified range (Of course, there are some iftag tags
 outside the specified range).

===============================================================================
[[[Detailed description]]]

(1) Why cannot radix_tree_gang_lookup_tag_slot() return forever?

__lookup_tag():
 - Return with 0.
 - Return with the index which is not bigger than the old one as the
   input parameter.

Therefore the following "while" repeats forever because the above
conditions cause "ret" not to be updated and the cur_index cannot be
changed into the bigger one.

(So, radix_tree_gang_lookup_tag_slot() cannot return forever.)

radix_tree_gang_lookup_tag_slot():
1178         while (ret < max_items) {
1179                 unsigned int slots_found;
1180                 unsigned long next_index;       /* Index of next search */
1181
1182                 if (cur_index > max_index)
1183                         break;
1184                 slots_found = __lookup_tag(node, results + ret,
1185                                 cur_index, max_items - ret, &next_index,
tag);
1186                 ret += slots_found;
			// cannot update ret because slots_found == 0.
			// so, this while loops forever.
1187                 if (next_index == 0)
1188                         break;
1189                 cur_index = next_index;
1190         }

(2) Why does __lookup_tag() return with 0 and doesn't update the index?

Assuming the following:
  - the one of the slot in radix_tree_node is NULL.
  - the one of the tag which corresponds to the slot sets with
    PAGECACHE_TAG_TOWRITE or other.
  - In a certain height(!=0), the corresponding index is 0.

a) __lookup_tag() notices that the tag is set.

1005 static unsigned int
1006 __lookup_tag(struct radix_tree_node *slot, void ***results, unsigned long index,
1007         unsigned int max_items, unsigned long *next_index, unsigned int tag)
1008 {
1009         unsigned int nr_found = 0;
1010         unsigned int shift, height;
1011
1012         height = slot->height;
1013         if (height == 0)
1014                 goto out;
1015         shift = (height-1) * RADIX_TREE_MAP_SHIFT;
1016
1017         while (height > 0) {
1018                 unsigned long i = (index >> shift) & RADIX_TREE_MAP_MASK ;
1019
1020                 for (;;) {
1021                         if (tag_get(slot, tag, i))
1022                                 break;
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* the index is not updated yet.

b) __lookup_tag() notices that the slot is NULL.

1023                         index &= ~((1UL << shift) - 1);
1024                         index += 1UL << shift;
1025                         if (index == 0)
1026                                 goto out;       /* 32-bit wraparound */
1027                         i++;
1028                         if (i == RADIX_TREE_MAP_SIZE)
1029                                 goto out;
1030                 }
1031                 height--;
1032                 if (height == 0) {      /* Bottom level: grab some items */
...
1055                 }
1056                 shift -= RADIX_TREE_MAP_SHIFT;
1057                 slot = rcu_dereference_raw(slot->slots[i]);
1058                 if (slot == NULL)
1059                         break;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

c) __lookup_tag() doesn't update the index and return with 0.

1060         }
1061 out:
1062         *next_index = index;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1063         return nr_found;
1064 }

(3) Why is the slot NULL even if the tag is set?

Because radix_tree_range_tag_if_tagged() always sets the root tag with
PAGECACHE_TAG_TOWRITE if the root tag is set with PAGECACHE_TAG_DIRTY,
even if there is no tag which can be set with PAGECACHE_TAG_TOWRITE
in the specified range (from *first_indexp to last_index). Of course,
some PAGECACHE_TAG_DIRTY nodes must exist outside the specified range.
(radix_tree_range_tag_if_tagged() is called only from tag_pages_for_writeback())

 640 unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root
*root,
 641                 unsigned long *first_indexp, unsigned long last_index,
 642                 unsigned long nr_to_tag,
 643                 unsigned int iftag, unsigned int settag)
 644 {
 645         unsigned int height = root->height;
 646         struct radix_tree_path path[height];
 647         struct radix_tree_path *pathp = path;
 648         struct radix_tree_node *slot;
 649         unsigned int shift;
 650         unsigned long tagged = 0;
 651         unsigned long index = *first_indexp;
 652
 653         last_index = min(last_index, radix_tree_maxindex(height));
 654         if (index > last_index)
 655                 return 0;
 656         if (!nr_to_tag)
 657                 return 0;
 658         if (!root_tag_get(root, iftag)) {
 659                 *first_indexp = last_index + 1;
 660                 return 0;
 661         }
 662         if (height == 0) {
 663                 *first_indexp = last_index + 1;
 664                 root_tag_set(root, settag);
 665                 return 1;
 666         }
...
 733         root_tag_set(root, settag);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 734         *first_indexp = index;
 735
 736         return tagged;
 737 }

As the result, there is no radix_tree_node which is set with
PAGECACHE_TAG_TOWRITE but the root tag(radix_tree_root) is set with
PAGECACHE_TAG_TOWRITE.

[figure: inside radix_tree]
(Please see the figure with typewriter font)
===========================================
          [roottag = DIRTY]
                 |             tag=0:NOTHING
         tag[0 0 0 1]              1:DIRTY
            [x x x +]              2:WRITEBACK
                   |               3:DIRTY,WRITEBACK
                   p               4:TOWRITE
             <--->                 5:DIRTY,TOWRITE ...
     specified range (index: 0 to 2)

* There is no DIRTY tag within the specified range.
 (But there is a DIRTY tag outside that range.)

            | | | | | | | | |
    after calling tag_pages_for_writeback()
            | | | | | | | | |
            v v v v v v v v v

          [roottag = DIRTY,TOWRITE]
                 |                 p is "page".
         tag[0 0 0 1]              x is NULL.
            [x x x +]              +- is a pointer to "page".
                   |
                   p

* But TOWRITE tag is set on the root tag.
============================================

After that, radix_tree_extend() via radix_tree_insert() is called
when the page is added.
This function sets the new radix_tree_node with PAGECACHE_TAG_TOWRITE
to succeed the status of the root tag.

 246 static int radix_tree_extend(struct radix_tree_root *root, unsigned long
index)
 247 {
 248         struct radix_tree_node *node;
 249         unsigned int height;
 250         int tag;
 251
 252         /* Figure out what the height should be.  */
 253         height = root->height + 1;
 254         while (index > radix_tree_maxindex(height))
 255                 height++;
 256
 257         if (root->rnode == NULL) {
 258                 root->height = height;
 259                 goto out;
 260         }
 261
 262         do {
 263                 unsigned int newheight;
 264                 if (!(node = radix_tree_node_alloc(root)))
 265                         return -ENOMEM;
 266
 267                 /* Increase the height.  */
 268                 node->slots[0] = radix_tree_indirect_to_ptr(root->rnode);
 269
 270                 /* Propagate the aggregated tag info into the new root */
 271                 for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) {
 272                         if (root_tag_get(root, tag))
 273                                 tag_set(node, tag, 0);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 274                 }

===========================================
          [roottag = DIRTY,TOWRITE]
                 |     :
         tag[0 0 0 1] [0 0 0 0]
            [x x x +] [+ x x x]
                   |   |
                   p   p (new page)

            | | | | | | | | |
    after calling radix_tree_insert
            | | | | | | | | |
            v v v v v v v v v

          [roottag = DIRTY,TOWRITE]
                 |
         tag [5 0 0 0]    *  DIRTY and TOWRITE tags are
             [+ + x x]       succeeded to the new node.
              | |
  tag [0 0 0 1] [0 0 0 0]
      [x x x +] [+ x x x]
             |   |
             p   p
============================================

After that, the index 3 page is released by remove_from_page_cache().
Then we can make the situation that the tag is set with PAGECACHE_TAG_TOWRITE
and that the slot which corresponds to the tag is NULL.
===========================================
          [roottag = DIRTY,TOWRITE]
                 |
         tag [5 0 0 0]
             [+ + x x]
              | |
  tag [0 0 0 1] [0 0 0 0]
      [x x x +] [+ x x x]
             |   |
             p   p
         (remove)

            | | | | | | | | |
    after calling remove_page_cache
            | | | | | | | | |
            v v v v v v v v v

          [roottag = DIRTY,TOWRITE]
                 |
         tag [4 0 0 0]      * Only DIRTY tag is cleared
             [x + x x]        because no TOWRITE tag is existed
                |             in the bottom node.
                [0 0 0 0]
                [+ x x x]
                 |
                 p
============================================

To solve this problem

Change to that radix_tree_tag_if_tagged() doesn't tag the root tag
if it doesn't set any tags within the specified range.

Like this.
============================================
 640 unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root
*root,
 641                 unsigned long *first_indexp, unsigned long last_index,
 642                 unsigned long nr_to_tag,
 643                 unsigned int iftag, unsigned int settag)
 644 {
 650         unsigned long tagged = 0;
...
 733 	     if (tagged)
^^^^^^^^^^^^^^^^^^^^^^^^
 734            root_tag_set(root, settag);
 735         *first_indexp = index;
 736
 737         return tagged;
 738 }

============================================
Signed-off-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

setup_irq() was called before clockevents_register_device() which is
needed by the irq handler.  Bug was reproducible by restarting the
kernel using kexec (reliable crash).
Signed-off-by: NNikolaus Voss <n.voss@weinmann.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A fix up mem_cgroup_move_parent() which use compound_order() in
asynchronous manner.  This compound_order() may return unknown value
because we don't take lock.  Use PageTransHuge() and HPAGE_SIZE instead
of it.

Also clean up for mem_cgroup_move_parent().
 - remove unnecessary initialization of local variable.
 - rename charge_size -> page_size
 - remove unnecessary (wrong) comment.
 - added a comment about THP.

Note:
 Current design take compound_page_lock() in caller of move_account().
 This should be revisited when we implement direct move_task of hugepage
 without splitting.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_disabled() should be checked at splitting.  If disabled, no
heavy work is necesary.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4b534334 ("memcg: clean up try_charge main loop") removes a
cancel of charge at case: memory charge-> success.  mem+swap charge->
failure.

This leaks usage of memory.  Fix it.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: <stable@kernel.org>	[2.6.36+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Callers of migrate_pages should putback_lru_pages to return pages
isolated to LRU or free list.  Now comment is rather confusing.  It says
caller always have to call it.

It is more clear to point out that the caller has to call it if
migrate_pages's return value isn't zero.
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 5d689240 ("thp: select CONFIG_COMPACTION if TRANSPARENT_HUGEPAGE
enabled") causes this warning during the configuration process:

  warning: (TRANSPARENT_HUGEPAGE) selects COMPACTION which has unmet
  direct dependencies (EXPERIMENTAL && HUGETLB_PAGE && MMU)

COMPACTION doesn't depend on HUGETLB_PAGE, it doesn't depend on THP
either, it is also useful for regular alloc_pages(order > 0) including
the very kernel stack during fork (THREAD_ORDER = 1).  It's always
better to enable COMPACTION.

The warning should be an error because we would end up with MIGRATION
not selected, and COMPACTION wouldn't work without migration (despite it
seems to build with an inline migrate_pages returning -ENOSYS).

I'd also like to remove EXPERIMENTAL: compaction has been in the kernel
for some releases (for full safety the default remains disabled which I
think is enough).
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: NLuca Tettamanti <kronos.it@gmail.com>
Tested-by: NLuca Tettamanti <kronos.it@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In mm/memcontrol.c::mem_cgroup_move_parent() there's a path that jumps
to the 'put_back' label

  	ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false, charge);
  	if (ret || !parent)
  		goto put_back;

where we'll

  	if (charge > PAGE_SIZE)
  		compound_unlock_irqrestore(page, flags);

but, we have not assigned anything to 'flags' at this point, nor have we
called 'compound_lock_irqsave()' (which is what sets 'flags').  The
'put_back' label should be moved below the call to
compound_unlock_irqrestore() as per this patch.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0e093d99 ("writeback: do not sleep on the congestion queue if
there are no congested BDIs or if significant congestion is not being
encountered in the current zone") uncovered a livelock in the page
allocator that resulted in tasks infinitely looping trying to find
memory and kswapd running at 100% cpu.

The issue occurs because drain_all_pages() is called immediately
following direct reclaim when no memory is freed and try_to_free_pages()
returns non-zero because all zones in the zonelist do not have their
all_unreclaimable flag set.

When draining the per-cpu pagesets back to the buddy allocator for each
zone, the zone->pages_scanned counter is cleared to avoid erroneously
setting zone->all_unreclaimable later.  The problem is that no pages may
actually be drained and, thus, the unreclaimable logic never fails
direct reclaim so the oom killer may be invoked.

This apparently only manifested after wait_iff_congested() was
introduced and the zone was full of anonymous memory that would not
congest the backing store.  The page allocator would infinitely loop if
there were no other tasks waiting to be scheduled and clear
zone->pages_scanned because of drain_all_pages() as the result of this
change before kswapd could scan enough pages to trigger the reclaim
logic.  Additionally, with every loop of the page allocator and in the
reclaim path, kswapd would be kicked and would end up running at 100%
cpu.  In this scenario, current and kswapd are all running continuously
with kswapd incrementing zone->pages_scanned and current clearing it.

The problem is even more pronounced when current swaps some of its
memory to swap cache and the reclaimable logic then considers all active
anonymous memory in the all_unreclaimable logic, which requires a much
higher zone->pages_scanned value for try_to_free_pages() to return zero
that is never attainable in this scenario.

Before wait_iff_congested(), the page allocator would incur an
unconditional timeout and allow kswapd to elevate zone->pages_scanned to
a level that the oom killer would be called the next time it loops.

The fix is to only attempt to drain pcp pages if there is actually a
quantity to be drained.  The unconditional clearing of
zone->pages_scanned in free_pcppages_bulk() need not be changed since
other callers already ensure that draining will occur.  This patch
ensures that free_pcppages_bulk() will actually free memory before
calling into it from drain_all_pages() so zone->pages_scanned is only
cleared if appropriate.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Before 0e093d99 ("writeback: do not sleep on the congestion queue if
there are no congested BDIs or if significant congestion is not being
encountered in the current zone"), preferred_zone was only used for NUMA
statistics, to determine the zoneidx from which to allocate from given
the type requested, and whether to utilize memory compaction.

wait_iff_congested(), though, uses preferred_zone to determine if the
congestion wait should be deferred because its dirty pages are backed by
a congested bdi.  This incorrectly defers the timeout and busy loops in
the page allocator with various cond_resched() calls if preferred_zone
is not allowed in the current context, usually consuming 100% of a cpu.

This patch ensures preferred_zone is an allowed zone in the fastpath
depending on whether current is constrained by its cpuset or nodes in
its mempolicy (when the nodemask passed is non-NULL).  This is correct
since the fastpath allocation always passes ALLOC_CPUSET when trying to
allocate memory.  In the slowpath, this patch resets preferred_zone to
the first zone of the allowed type when the allocation is not
constrained by current's cpuset, i.e.  it does not pass ALLOC_CPUSET.

This patch also ensures preferred_zone is from the set of allowed nodes
when called from within direct reclaim since allocations are always
constrained by cpusets in this context (it is blockable).

Both of these uses of cpuset_current_mems_allowed are protected by
get_mems_allowed().
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both pps_parport and pps_gen_parport are written in a way that they
can't share a port with any other driver.  This can result in locking up
the process that loads modules or even the whole kernel if the modules
are compiled in.  Use PARPORT_FLAG_EXCL to indicate this.
Signed-off-by: NAlexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

parport_unregister_device() should never be used when interrupts are
enabled in hardware and irq handler is registered so there is no need to
disable interrupts when using waitlist_lock.  But there is no way to
explain this subtle semantics to lockdep analyzer.

So disable interrupts here too to simplify things.  The price is
negligible.
Signed-off-by: NAlexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Latest kernel has many changes in IRQ subsystem and its interfaces, like
adding "irq_eoi" for struct irq_chip, this patch is a follow up change
for that.

Also remove the unnecessary cast for a "void *".
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Alek Du <alek.du@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return PTR_ERR(led_dat->pwm) instead of 0 if pwm_request failed
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Luotao Fu <l.fu@pengutronix.de>
Cc: Reviewed-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mips (and sparc32):

  In file included from arch/mips/include/asm/tlb.h:21,
                   from mm/pgtable-generic.c:9:
  include/asm-generic/tlb.h: In function `tlb_flush_mmu':
  include/asm-generic/tlb.h:76: error: implicit declaration of function `release_pages'
  include/asm-generic/tlb.h: In function `tlb_remove_page':
  include/asm-generic/tlb.h:105: error: implicit declaration of function `page_cache_release'

free_pages_and_swap_cache() and free_page_and_swap_cache() are macros
which call release_pages() and page_cache_release().  The obvious fix is
to include pagemap.h in swap.h, where those macros are defined.  But that
breaks sparc for weird reasons.

So fix it within mm/pgtable-generic.c instead.
Reported-by: NYoichi Yuasa <yuasa@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes TRANSPARENT_HUGEPAGE=y with PARAVIRT=y and HIGHMEM64=n.

The #ifdef that this patch removes was erratically introduced to fix a
build error for noPAE (where pmd.pmd doesn't exist).  So then the kernel
built but it failed at runtime because set_pmd_at was a noop.  This will
correct it by enabling set_pmd_at for noPAE mode too.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: Nwerner <w.landgraf@ru.ru>
Reported-by: NMinchan Kim <minchan.kim@gmail.com>
Tested-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ALSA: AACI: fix timeout duration
  ALSA: AACI: fix timeout condition checking
  ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio mode
  ARM: 6637/1: Make the argument to virt_to_phys() "const volatile"
  ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode
  ARM: 6635/2: Configure reference clock for Versatile Express timers
  ARM: versatile: name configuration options after actual board names
  ARM: realview: name configuration options after actual board names
  ARM: realview,vexpress: fix section mismatch warning for pen_release
  ARM: 6632/3: mmci: stop using the blockend interrupts

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix crash after one superblock became unavailable

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/amiga: Fix "debug=mem"
  m68k/atari: Rename "scc" to "atari_scc"
  m68k: Uninline strchr()

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform data
  ARM: mach-shmobile: sh73a0 CPGA fix for PLL CFG bit
  ARM: mach-shmobile: mackerel: clarify shdi/mmcif switch settings
  ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTP
  ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3
  ARM: mach-shmobile: remove sh7367 on-chip set_irq_type()
  ARM: mach-shmobile: sh7372 INTCS MFIS2 interrupt update
  ARM: mach-shmobile: ag5evm: Add IrDA support
  ARM: mach-shmobile: clock-sh7372: fixup pllc2 set_rate
  mmc: sh_mmcif: Convert to __raw_xxx() I/O accessors.
  ARM: mach-shmobile: ag5evm requires GPIOLIB
  ARM: mach-shmobile: fix cpu_base of gic_init() on sh73a0

Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6

* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
  mailmap: Add an entry for Axel Lin.
  video: fix some comments in drivers/video/console/vgacon.c
  drivers/video/bf537-lq035.c: Add missing IS_ERR test
  video: pxa168fb: remove a redundant pxa168fb_check_var call
  video: da8xx-fb: fix fb_probe error path
  video: pxa3xx-gcu: Return -EFAULT when copy_from_user() fails
  video: nuc900fb: properly free resources in nuc900fb_remove
  video: nuc900fb: fix compile error

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix build of sh7750 base boards
  sh: update INTC to clear IRQ sense valid flag
  sh: Fix sh build failure when CONFIG_SFC=m
  sh: fix MSIOF0 SPI on ecovec: it conflicts with VOU
  sh: support XZ-compressed kernel.
  sh: Fix up breakage from asm-generic/pgtable.h changes.

Fix __key_link_end()'s attempt to fix up the quota if an error occurs.

There are two erroneous cases: Firstly, we always decrease the quota if
the preallocated replacement keyring needs cleaning up, irrespective of
whether or not we should (we may have replaced a pointer rather than
adding another pointer).

Secondly, we never clean up the quota if we added a pointer without the
keyring storage being extended (we allocate multiple pointers at a time,
even if we're not going to use them all immediately).

We handle this by setting the bottom bit of the preallocation pointer in
__key_link_begin() to indicate that the quota needs fixing up, which is
then passed to __key_link() (which clears the whole thing) and
__key_link_end().
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

GPL V2 should be GPL v2
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A B C D E ...
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

busy_loop() returns negative error code, thus change err variable
from u32 to int to properly propagate correct error code.

Also remove unneeded initialization for err and i variables.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Relying on the access time of peripherals is unreliable - it depends
on the speed of the CPU and the bus.  On Versatile Express, these
timeouts were expiring, causing the driver to fail.

Add udelay(1) to ensure that they don't expire early, and adjust
timeouts to give a reasonable margin over the response times.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>