__dax_fault() takes i_mmap_lock for write. Let's pair it with write
unlock on do_cow_fault() side.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

DAX is not so special: we need i_mmap_lock to protect mapping->i_mmap.

__dax_pmd_fault() uses unmap_mapping_range() shoot out zero page from
all mappings.  We need to drop i_mmap_lock there to avoid lock deadlock.

Re-aquiring the lock should be fine since we check i_size after the
point.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If two threads write-fault on the same hole at the same time, the winner
of the race will return to userspace and complete their store, only to
have the loser overwrite their store with zeroes.  Fix this for now by
taking the i_mmap_sem for write instead of read, and do so outside the
call to get_block().  Now the loser of the race will see the block has
already been zeroed, and will not zero it again.

This severely limits our scalability.  I have ideas for improving it, but
those can wait for a later patch.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow non-anonymous VMAs to provide huge pages in response to a page fault.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

special_mapping_fault() is absolutely broken.  It seems it was always
wrong, but this didn't matter until vdso/vvar started to use more than
one page.

And after this change vma_is_anonymous() becomes really trivial, it
simply checks vm_ops == NULL.  However, I do think the helper makes
sense.  There are a lot of ->vm_ops != NULL checks, the helper makes the
caller's code more understandable (self-documented) and this is more
grep-friendly.

This patch (of 3):

Preparation.  Add the new simple helper, vma_is_anonymous(vma), and change
handle_pte_fault() to use it.  It will have more users.

The name is not accurate, say a hpet_mmap()'ed vma is not anonymous.
Perhaps it should be named vma_has_fault() instead.  But it matches the
logic in mmap.c/memory.c (see next changes).  "True" just means that a
page fault will use do_anonymous_page().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes the tlb_next_batch() bool due to this particular function only
ever returning either one or zero as its return value.
Signed-off-by: NNicholas Krause <xerofoify@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is where the page faults must be modified to call
handle_userfault() if userfaultfd_missing() is true (so if the
vma->vm_flags had VM_UFFD_MISSING set).

handle_userfault() then takes care of blocking the page fault and
delivering it to userland.

The fault flags must also be passed as parameter so the "read|write"
kind of fault can be passed to userland.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NPavel Emelyanov <xemul@parallels.com>
Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Cc: zhang.zhanghailiang@huawei.com
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reading page fault handler code I've noticed that under right
circumstances kernel would map anonymous pages into file mappings: if
the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated
on ->mmap(), kernel would handle page fault to not populated pte with
do_anonymous_page().

Let's change page fault handler to use do_anonymous_page() only on
anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not
shared.

For file mappings without vm_ops->fault() or shred VMA without vm_ops,
page fault on pte_none() entry would lead to SIGBUS.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Historically memcg overhead was high even if memcg was unused.  This has
improved a lot but it still showed up in a profile summary as being a
problem.

/usr/src/linux-4.0-vanilla/mm/memcontrol.c                           6.6441   395842
  mem_cgroup_try_charge                                                        2.950%   175781
  __mem_cgroup_count_vm_event                                                  1.431%    85239
  mem_cgroup_page_lruvec                                                       0.456%    27156
  mem_cgroup_commit_charge                                                     0.392%    23342
  uncharge_list                                                                0.323%    19256
  mem_cgroup_update_lru_size                                                   0.278%    16538
  memcg_check_events                                                           0.216%    12858
  mem_cgroup_charge_statistics.isra.22                                         0.188%    11172
  try_charge                                                                   0.150%     8928
  commit_charge                                                                0.141%     8388
  get_mem_cgroup_from_mm                                                       0.121%     7184

That is showing that 6.64% of system CPU cycles were in memcontrol.c and
dominated by mem_cgroup_try_charge.  The annotation shows that the bulk
of the cost was checking PageSwapCache which is expected to be cache hot
but is very expensive.  The problem appears to be that __SetPageUptodate
is called just before the check which is a write barrier.  It is
required to make sure struct page and page data is written before the
PTE is updated and the data visible to userspace.  memcg charging does
not require or need the barrier but gets unfairly hit with the cost so
this patch attempts the charging before the barrier.  Aside from the
accidental cost to memcg there is the added benefit that the barrier is
avoided if the page cannot be charged.  When applied the relevant
profile summary is as follows.

/usr/src/linux-4.0-chargefirst-v2r1/mm/memcontrol.c                  3.7907   223277
  __mem_cgroup_count_vm_event                                                  1.143%    67312
  mem_cgroup_page_lruvec                                                       0.465%    27403
  mem_cgroup_commit_charge                                                     0.381%    22452
  uncharge_list                                                                0.332%    19543
  mem_cgroup_update_lru_size                                                   0.284%    16704
  get_mem_cgroup_from_mm                                                       0.271%    15952
  mem_cgroup_try_charge                                                        0.237%    13982
  memcg_check_events                                                           0.222%    13058
  mem_cgroup_charge_statistics.isra.22                                         0.185%    10920
  commit_charge                                                                0.140%     8235
  try_charge                                                                   0.131%     7716

That brings the overhead down to 3.79% and leaves the memcg fault
accounting to the root cgroup but it's an improvement.  The difference
in headline performance of the page fault microbench is marginal as
memcg is such a small component of it.

pft faults
                                       4.0.0                  4.0.0
                                     vanilla            chargefirst
Hmean    faults/cpu-1 1443258.1051 (  0.00%) 1509075.7561 (  4.56%)
Hmean    faults/cpu-3 1340385.9270 (  0.00%) 1339160.7113 ( -0.09%)
Hmean    faults/cpu-5  875599.0222 (  0.00%)  874174.1255 ( -0.16%)
Hmean    faults/cpu-7  601146.6726 (  0.00%)  601370.9977 (  0.04%)
Hmean    faults/cpu-8  510728.2754 (  0.00%)  510598.8214 ( -0.03%)
Hmean    faults/sec-1 1432084.7845 (  0.00%) 1497935.5274 (  4.60%)
Hmean    faults/sec-3 3943818.1437 (  0.00%) 3941920.1520 ( -0.05%)
Hmean    faults/sec-5 3877573.5867 (  0.00%) 3869385.7553 ( -0.21%)
Hmean    faults/sec-7 3991832.0418 (  0.00%) 3992181.4189 (  0.01%)
Hmean    faults/sec-8 3987189.8167 (  0.00%) 3986452.2204 ( -0.02%)

It's only visible at single threaded. The overhead is there for higher
threads but other factors dominate.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Turn
	d_path(&file->f_path, ...);
into
	file_path(file, ...);
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Commit 662bbcb2 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()") removed might_sleep() checks for all user access
code (that uses might_fault()).

The reason was to disable wrong "sleep in atomic" warnings in the
following scenario:

    pagefault_disable()
    rc = copy_to_user(...)
    pagefault_enable()

Which is valid, as pagefault_disable() increments the preempt counter
and therefore disables the pagefault handler. copy_to_user() will not
sleep and return an error code if a page is not available.

However, as all might_sleep() checks are removed,
CONFIG_DEBUG_ATOMIC_SLEEP would no longer detect the following scenario:

    spin_lock(&lock);
    rc = copy_to_user(...)
    spin_unlock(&lock)

If the kernel is compiled with preemption turned on, preempt_disable()
will make in_atomic() detect disabled preemption. The fault handler would
correctly never sleep on user access.
However, with preemption turned off, preempt_disable() is usually a NOP
(with !CONFIG_PREEMPT_COUNT), therefore in_atomic() will not be able to
detect disabled preemption nor disabled pagefaults. The fault handler
could sleep.
We really want to enable CONFIG_DEBUG_ATOMIC_SLEEP checks for user access
functions again, otherwise we can end up with horrible deadlocks.

Root of all evil is that pagefault_disable() acts almost as
preempt_disable(), depending on preemption being turned on/off.

As we now have pagefault_disabled(), we can use it to distinguish
whether user acces functions might sleep.

Convert might_fault() into a makro that calls __might_fault(), to
allow proper file + line messages in case of a might_sleep() warning.
Reviewed-and-tested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bigeasy@linutronix.de
Cc: borntraeger@de.ibm.com
Cc: daniel.vetter@intel.com
Cc: heiko.carstens@de.ibm.com
Cc: herbert@gondor.apana.org.au
Cc: hocko@suse.cz
Cc: hughd@google.com
Cc: mst@redhat.com
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: schwidefsky@de.ibm.com
Cc: yang.shi@windriver.com
Link: http://lkml.kernel.org/r/1431359540-32227-3-git-send-email-dahi@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to
get notified when access is a write to a read-only PFN.

This can happen if we mmap() a file then first mmap-read from it to
page-in a read-only PFN, than we mmap-write to the same page.

We need this functionality to fix a DAX bug, where in the scenario above
we fail to set ctime/mtime though we modified the file.  An xfstest is
attached to this patchset that shows the failure and the fix.  (A DAX
patch will follow)

This functionality is extra important for us, because upon dirtying of a
pmem page we also want to RDMA the page to a remote cluster node.

We define a new pfn_mkwrite and do not reuse page_mkwrite because
  1 - The name ;-)
  2 - But mainly because it would take a very long and tedious
      audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP
      users. To make sure they do not now CRASH. For example current
      DAX code (which this is for) would crash.
      If we would want to reuse page_mkwrite, We will need to first
      patch all users, so to not-crash-on-no-page. Then enable this
      patch. But even if I did that I would not sleep so well at night.
      Adding a new vector is the safest thing to do, and is not that
      expensive. an extra pointer at a static function vector per driver.
      Also the new vector is better for performance, because else we
      Will call all current Kernel vectors, so to:
        check-ha-no-page-do-nothing and return.

No need to call it from do_shared_fault because do_wp_page is called to
change pte permissions anyway.
Signed-off-by: NYigal Korman <yigal@plexistor.com>
Signed-off-by: NBoaz Harrosh <boaz@plexistor.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A lot of filesystems use generic_file_mmap() and filemap_fault(),
f_op->mmap and vm_ops->fault aren't enough to identify filesystem.

This prints file name, vm_ops->fault, f_op->mmap and a_ops->readpage
(which is almost always implemented and filesystem-specific).

Example:

[   23.676410] BUG: Bad page map in process sh  pte:1b7e6025 pmd:19bbd067
[   23.676887] page:ffffea00006df980 count:4 mapcount:1 mapping:ffff8800196426c0 index:0x97
[   23.677481] flags: 0x10000000000000c(referenced|uptodate)
[   23.677896] page dumped because: bad pte
[   23.678205] addr:00007f52fcb17000 vm_flags:00000075 anon_vma:          (null) mapping:ffff8800196426c0 index:97
[   23.678922] file:libc-2.19.so fault:filemap_fault mmap:generic_file_readonly_mmap readpage:v9fs_vfs_readpage

[akpm@linux-foundation.org: use pr_alert, per Kirill]
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Sasha Levin <sasha.levin@oracle.com>
Acked-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We converted some of the usages of ACCESS_ONCE to READ_ONCE in the mm/
tree since it doesn't work reliably on non-scalar types.

This patch removes the rest of the usages of ACCESS_ONCE, and use the new
READ_ONCE API for the read accesses.  This makes things cleaner, instead
of using separate/multiple sets of APIs.
Signed-off-by: NJason Low <jason.low2@hp.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NDavidlohr Bueso <dave@stgolabs.net>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The do_wp_page function is extremely long.  Extract the logic for
handling a page belonging to a shared vma into a function of its own.

This helps the readability of the code, without doing any functional
change in it.
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NHaggai Eran <haggaie@mellanox.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Michel Lespinasse <walken@google.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In some cases, do_wp_page had to copy the page suffering a write fault
to a new location.  If the function logic decided that to do this, it
was done by jumping with a "goto" operation to the relevant code block.
This made the code really hard to understand.  It is also against the
kernel coding style guidelines.

This patch extracts the page copy and page table update logic to a
separate function.  It also clean up the naming, from "gotten" to
"wp_page_copy", and adds few comments.
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NHaggai Eran <haggaie@mellanox.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Michel Lespinasse <walken@google.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When do_wp_page is ending, in several cases it needs to unlock the pages
and ptls it was accessing.

Currently, this logic was "called" by using a goto jump.  This makes
following the control flow of the function harder.  Readability was
further hampered by the unlock case containing large amount of logic
needed only in one of the 3 cases.

Using goto for cleanup is generally allowed.  However, moving the
trivial unlocking flows to the relevant call sites allow deeper
refactoring in the next patch.
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NHaggai Eran <haggaie@mellanox.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Michel Lespinasse <walken@google.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently do_wp_page contains 265 code lines.  It also contains 9 goto
statements, of which 5 are targeting labels which are not cleanup
related.  This makes the function extremely difficult to understand.

The following patches are an attempt at breaking the function to its
basic components, and making it easier to understand.

The patches are straight forward function extractions from do_wp_page.
As we extract functions, we remove unneeded parameters and simplify the
code as much as possible.  However, the functionality is supposed to
remain completely unchanged.  The patches also attempt to document the
functionality of each extracted function.  In patch 2, we split the
unlock logic to the contain logic relevant to specific needs of each use
case, instead of having huge number of conditional decisions in a single
unlock flow.

This patch (of 4):

When do_wp_page is ending, in several cases it needs to reuse the existing
page.  This is achieved by making the page table writable, and possibly
updating the page-cache state.

Currently, this logic was "called" by using a goto jump.  This makes
following the control flow of the function harder.  It is also against the
coding style guidelines for using goto.

As the code can easily be refactored into a specialized function, refactor
it out and simplify the code flow in do_wp_page.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NHaggai Eran <haggaie@mellanox.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Michel Lespinasse <walken@google.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dave Chinner reported the following on https://lkml.org/lkml/2015/3/1/226

  Across the board the 4.0-rc1 numbers are much slower, and the degradation
  is far worse when using the large memory footprint configs. Perf points
  straight at the cause - this is from 4.0-rc1 on the "-o bhash=101073" config:

   -   56.07%    56.07%  [kernel]            [k] default_send_IPI_mask_sequence_phys
      - default_send_IPI_mask_sequence_phys
         - 99.99% physflat_send_IPI_mask
            - 99.37% native_send_call_func_ipi
                 smp_call_function_many
               - native_flush_tlb_others
                  - 99.85% flush_tlb_page
                       ptep_clear_flush
                       try_to_unmap_one
                       rmap_walk
                       try_to_unmap
                       migrate_pages
                       migrate_misplaced_page
                     - handle_mm_fault
                        - 99.73% __do_page_fault
                             trace_do_page_fault
                             do_async_page_fault
                           + async_page_fault
              0.63% native_send_call_func_single_ipi
                 generic_exec_single
                 smp_call_function_single

This is showing excessive migration activity even though excessive
migrations are meant to get throttled.  Normally, the scan rate is tuned
on a per-task basis depending on the locality of faults.  However, if
migrations fail for any reason then the PTE scanner may scan faster if
the faults continue to be remote.  This means there is higher system CPU
overhead and fault trapping at exactly the time we know that migrations
cannot happen.  This patch tracks when migration failures occur and
slows the PTE scanner.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NDave Chinner <david@fromorbit.com>
Tested-by: NDave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Protecting a PTE to trap a NUMA hinting fault clears the writable bit
and further faults are needed after trapping a NUMA hinting fault to set
the writable bit again.  This patch preserves the writable bit when
trapping NUMA hinting faults.  The impact is obvious from the number of
minor faults trapped during the basis balancing benchmark and the system
CPU usage;

  autonumabench
                                             4.0.0-rc4             4.0.0-rc4
                                              baseline              preserve
  Time System-NUMA01                  107.13 (  0.00%)      103.13 (  3.73%)
  Time System-NUMA01_THEADLOCAL       131.87 (  0.00%)       83.30 ( 36.83%)
  Time System-NUMA02                    8.95 (  0.00%)       10.72 (-19.78%)
  Time System-NUMA02_SMT                4.57 (  0.00%)        3.99 ( 12.69%)
  Time Elapsed-NUMA01                 515.78 (  0.00%)      517.26 ( -0.29%)
  Time Elapsed-NUMA01_THEADLOCAL      384.10 (  0.00%)      384.31 ( -0.05%)
  Time Elapsed-NUMA02                  48.86 (  0.00%)       48.78 (  0.16%)
  Time Elapsed-NUMA02_SMT              47.98 (  0.00%)       48.12 ( -0.29%)

               4.0.0-rc4   4.0.0-rc4
                baseline    preserve
  User          44383.95    43971.89
  System          252.61      201.24
  Elapsed         998.68     1000.94

  Minor Faults   2597249     1981230
  Major Faults       365         364

There is a similar drop in system CPU usage using Dave Chinner's xfsrepair
workload

                                      4.0.0-rc4             4.0.0-rc4
                                       baseline              preserve
  Amean    real-xfsrepair      454.14 (  0.00%)      442.36 (  2.60%)
  Amean    syst-xfsrepair      277.20 (  0.00%)      204.68 ( 26.16%)

The patch looks hacky but the alternatives looked worse.  The tidest was
to rewalk the page tables after a hinting fault but it was more complex
than this approach and the performance was worse.  It's not generally
safe to just mark the page writable during the fault if it's a write
fault as it may have been read-only for COW so that approach was
discarded.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NDave Chinner <david@fromorbit.com>
Tested-by: NDave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These are three follow-on patches based on the xfsrepair workload Dave
Chinner reported was problematic in 4.0-rc1 due to changes in page table
management -- https://lkml.org/lkml/2015/3/1/226.

Much of the problem was reduced by commit 53da3bc2 ("mm: fix up numa
read-only thread grouping logic") and commit ba68bc01 ("mm: thp:
Return the correct value for change_huge_pmd").  It was known that the
performance in 3.19 was still better even if is far less safe.  This
series aims to restore the performance without compromising on safety.

For the test of this mail, I'm comparing 3.19 against 4.0-rc4 and the
three patches applied on top

  autonumabench
                                                3.19.0             4.0.0-rc4             4.0.0-rc4             4.0.0-rc4             4.0.0-rc4
                                               vanilla               vanilla          vmwrite-v5r8         preserve-v5r8         slowscan-v5r8
  Time System-NUMA01                  124.00 (  0.00%)      161.86 (-30.53%)      107.13 ( 13.60%)      103.13 ( 16.83%)      145.01 (-16.94%)
  Time System-NUMA01_THEADLOCAL       115.54 (  0.00%)      107.64 (  6.84%)      131.87 (-14.13%)       83.30 ( 27.90%)       92.35 ( 20.07%)
  Time System-NUMA02                    9.35 (  0.00%)       10.44 (-11.66%)        8.95 (  4.28%)       10.72 (-14.65%)        8.16 ( 12.73%)
  Time System-NUMA02_SMT                3.87 (  0.00%)        4.63 (-19.64%)        4.57 (-18.09%)        3.99 ( -3.10%)        3.36 ( 13.18%)
  Time Elapsed-NUMA01                 570.06 (  0.00%)      567.82 (  0.39%)      515.78 (  9.52%)      517.26 (  9.26%)      543.80 (  4.61%)
  Time Elapsed-NUMA01_THEADLOCAL      393.69 (  0.00%)      384.83 (  2.25%)      384.10 (  2.44%)      384.31 (  2.38%)      380.73 (  3.29%)
  Time Elapsed-NUMA02                  49.09 (  0.00%)       49.33 ( -0.49%)       48.86 (  0.47%)       48.78 (  0.63%)       50.94 ( -3.77%)
  Time Elapsed-NUMA02_SMT              47.51 (  0.00%)       47.15 (  0.76%)       47.98 ( -0.99%)       48.12 ( -1.28%)       49.56 ( -4.31%)

                3.19.0   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4
               vanilla     vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8
  User        46334.60    46391.94    44383.95    43971.89    44372.12
  System        252.84      284.66      252.61      201.24      249.00
  Elapsed      1062.14     1050.96      998.68     1000.94     1026.78

Overall the system CPU usage is comparable and the test is naturally a
bit variable.  The slowing of the scanner hurts numa01 but on this
machine it is an adverse workload and patches that dramatically help it
often hurt absolutely everything else.

Due to patch 2, the fault activity is interesting

                                  3.19.0   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4
                                 vanilla     vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8
  Minor Faults                   2097811     2656646     2597249     1981230     1636841
  Major Faults                       362         450         365         364         365

Note the impact preserving the write bit across protection updates and
fault reduces faults.

  NUMA alloc hit                 1229008     1217015     1191660     1178322     1199681
  NUMA alloc miss                      0           0           0           0           0
  NUMA interleave hit                  0           0           0           0           0
  NUMA alloc local               1228514     1216317     1190871     1177448     1199021
  NUMA base PTE updates        245706197   240041607   238195516   244704842   115012800
  NUMA huge PMD updates           479530      468448      464868      477573      224487
  NUMA page range updates      491225557   479886983   476207932   489222218   229950144
  NUMA hint faults                659753      656503      641678      656926      294842
  NUMA hint local faults          381604      373963      360478      337585      186249
  NUMA hint local percent             57          56          56          51          63
  NUMA pages migrated            5412140     6374899     6266530     5277468     5755096
  AutoNUMA cost                    5121%       5083%       4994%       5097%       2388%

Here the impact of slowing the PTE scanner on migratrion failures is
obvious as "NUMA base PTE updates" and "NUMA huge PMD updates" are
massively reduced even though the headline performance is very similar.

As xfsrepair was the reported workload here is the impact of the series
on it.

  xfsrepair
                                         3.19.0             4.0.0-rc4             4.0.0-rc4             4.0.0-rc4             4.0.0-rc4
                                        vanilla               vanilla          vmwrite-v5r8         preserve-v5r8         slowscan-v5r8
  Min      real-fsmark        1183.29 (  0.00%)     1165.73 (  1.48%)     1152.78 (  2.58%)     1153.64 (  2.51%)     1177.62 (  0.48%)
  Min      syst-fsmark        4107.85 (  0.00%)     4027.75 (  1.95%)     3986.74 (  2.95%)     3979.16 (  3.13%)     4048.76 (  1.44%)
  Min      real-xfsrepair      441.51 (  0.00%)      463.96 ( -5.08%)      449.50 ( -1.81%)      440.08 (  0.32%)      439.87 (  0.37%)
  Min      syst-xfsrepair      195.76 (  0.00%)      278.47 (-42.25%)      262.34 (-34.01%)      203.70 ( -4.06%)      143.64 ( 26.62%)
  Amean    real-fsmark        1188.30 (  0.00%)     1177.34 (  0.92%)     1157.97 (  2.55%)     1158.21 (  2.53%)     1182.22 (  0.51%)
  Amean    syst-fsmark        4111.37 (  0.00%)     4055.70 (  1.35%)     3987.19 (  3.02%)     3998.72 (  2.74%)     4061.69 (  1.21%)
  Amean    real-xfsrepair      450.88 (  0.00%)      468.32 ( -3.87%)      454.14 ( -0.72%)      442.36 (  1.89%)      440.59 (  2.28%)
  Amean    syst-xfsrepair      199.66 (  0.00%)      290.60 (-45.55%)      277.20 (-38.84%)      204.68 ( -2.51%)      150.55 ( 24.60%)
  Stddev   real-fsmark           4.12 (  0.00%)       10.82 (-162.29%)       4.14 ( -0.28%)        5.98 (-45.05%)        4.60 (-11.53%)
  Stddev   syst-fsmark           2.63 (  0.00%)       20.32 (-671.82%)       0.37 ( 85.89%)       16.47 (-525.59%)      15.05 (-471.79%)
  Stddev   real-xfsrepair        6.87 (  0.00%)        4.55 ( 33.75%)        3.46 ( 49.58%)        1.78 ( 74.12%)        0.52 ( 92.50%)
  Stddev   syst-xfsrepair        3.02 (  0.00%)       10.30 (-241.37%)      13.17 (-336.37%)       0.71 ( 76.63%)        5.00 (-65.61%)
  CoeffVar real-fsmark           0.35 (  0.00%)        0.92 (-164.73%)       0.36 ( -2.91%)        0.52 (-48.82%)        0.39 (-12.10%)
  CoeffVar syst-fsmark           0.06 (  0.00%)        0.50 (-682.41%)       0.01 ( 85.45%)        0.41 (-543.22%)       0.37 (-478.78%)
  CoeffVar real-xfsrepair        1.52 (  0.00%)        0.97 ( 36.21%)        0.76 ( 49.94%)        0.40 ( 73.62%)        0.12 ( 92.33%)
  CoeffVar syst-xfsrepair        1.51 (  0.00%)        3.54 (-134.54%)       4.75 (-214.31%)       0.34 ( 77.20%)        3.32 (-119.63%)
  Max      real-fsmark        1193.39 (  0.00%)     1191.77 (  0.14%)     1162.90 (  2.55%)     1166.66 (  2.24%)     1188.50 (  0.41%)
  Max      syst-fsmark        4114.18 (  0.00%)     4075.45 (  0.94%)     3987.65 (  3.08%)     4019.45 (  2.30%)     4082.80 (  0.76%)
  Max      real-xfsrepair      457.80 (  0.00%)      474.60 ( -3.67%)      457.82 ( -0.00%)      444.42 (  2.92%)      441.03 (  3.66%)
  Max      syst-xfsrepair      203.11 (  0.00%)      303.65 (-49.50%)      294.35 (-44.92%)      205.33 ( -1.09%)      155.28 ( 23.55%)

The really relevant lines as syst-xfsrepair which is the system CPU
usage when running xfsrepair.  Note that on my machine the overhead was
45% higher on 4.0-rc4 which may be part of what Dave is seeing.  Once we
preserve the write bit across faults, it's only 2.51% higher on average.
With the full series applied, system CPU usage is 24.6% lower on
average.

Again, the impact of preserving the write bit on minor faults is obvious
and the impact of slowing scanning after migration failures is obvious
on the PTE updates.  Note also that the number of pages migrated is much
reduced even though the headline performance is comparable.

                                  3.19.0   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4
                                 vanilla     vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8
  Minor Faults                 153466827   254507978   249163829   153501373   105737890
  Major Faults                       610         702         690         649         724
  NUMA base PTE updates        217735049   210756527   217729596   216937111   144344993
  NUMA huge PMD updates           129294       85044      106921      127246       79887
  NUMA pages migrated           21938995    29705270    28594162    22687324    16258075

                        3.19.0   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4
                       vanilla     vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8
  Mean sdb-avgqusz       13.47        2.54        2.55        2.47        2.49
  Mean sdb-avgrqsz      202.32      140.22      139.50      139.02      138.12
  Mean sdb-await         25.92        5.09        5.33        5.02        5.22
  Mean sdb-r_await        4.71        0.19        0.83        0.51        0.11
  Mean sdb-w_await      104.13        5.21        5.38        5.05        5.32
  Mean sdb-svctm          0.59        0.13        0.14        0.13        0.14
  Mean sdb-rrqm           0.16        0.00        0.00        0.00        0.00
  Mean sdb-wrqm           3.59     1799.43     1826.84     1812.21     1785.67
  Max  sdb-avgqusz      111.06       12.13       14.05       11.66       15.60
  Max  sdb-avgrqsz      255.60      190.34      190.01      187.33      191.78
  Max  sdb-await        168.24       39.28       49.22       44.64       65.62
  Max  sdb-r_await      660.00       52.00      280.00       76.00       12.00
  Max  sdb-w_await     7804.00       39.28       49.22       44.64       65.62
  Max  sdb-svctm          4.00        2.82        2.86        1.98        2.84
  Max  sdb-rrqm           8.30        0.00        0.00        0.00        0.00
  Max  sdb-wrqm          34.20     5372.80     5278.60     5386.60     5546.15

FWIW, I also checked SPECjbb in different configurations but it's
similar observations -- minor faults lower, PTE update activity lower
and performance is roughly comparable against 3.19.

This patch (of 3):

Threads that share writable data within pages are grouped together as
related tasks.  This decision is based on whether the PTE is marked
dirty which is subject to timing races between the PTE scanner update
and when the application writes the page.  If the page is file-backed,
then background flushes and sync also affect placement.  This is
unpredictable behaviour which is impossible to reason about so this
patch makes grouping decisions based on the VMA flags.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NDave Chinner <david@fromorbit.com>
Tested-by: NDave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dave Chinner reported that commit 4d942466 ("mm: convert
p[te|md]_mknonnuma and remaining page table manipulations") slowed down
his xfsrepair test enormously.  In particular, it was using more system
time due to extra TLB flushing.

The ultimate reason turns out to be how the change to use the regular
page table accessor functions broke the NUMA grouping logic.  The old
special mknuma/mknonnuma code accessed the page table present bit and
the magic NUMA bit directly, while the new code just changes the page
protections using PROT_NONE and the regular vma protections.

That sounds equivalent, and from a fault standpoint it really is, but a
subtle side effect is that the *other* protection bits of the page table
entries also change.  And the code to decide how to group the NUMA
entries together used the writable bit to decide whether a particular
page was likely to be shared read-only or not.

And with the change to make the NUMA handling use the regular permission
setting functions, that writable bit was basically always cleared for
private mappings due to COW.  So even if the page actually ends up being
written to in the end, the NUMA balancing would act as if it was always
shared RO.

This code is a heuristic anyway, so the fix - at least for now - is to
instead check whether the page is dirty rather than writable.  The bit
doesn't change with protection changes.

NOTE! This also adds a FIXME comment to revisit this issue,

Not only should we probably re-visit the whole "is this a shared
read-only page" heuristic (we might want to take the vma permissions
into account and base this more on those than the per-page ones, and
also look at whether the particular access that triggers it is a write
or not), but the whole COW issue shows that we should think about the
NUMA fault handling some more.

For example, maybe we should do the early-COW thing that a regular fault
does.  Or maybe we should accept that while using the same bits as
PROTNONE was a good thing (and got rid of the specual NUMA bit), we
might still want to just preseve the other protection bits across NUMA
faulting.

Those are bigger questions, left for later.  This just fixes up the
heuristic so that it at least approximates working again.  More analysis
and work needed.
Reported-by: NDave Chinner <david@fromorbit.com>
Tested-by: NMel Gorman <mgorman@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>,
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently COW of an XIP file is done by first bringing in a read-only
mapping, then retrying the fault and copying the page.  It is much more
efficient to tell the fault handler that a COW is being attempted (by
passing in the pre-allocated page in the vm_fault structure), and allow
the handler to perform the COW operation itself.

The handler cannot insert the page itself if there is already a read-only
mapping at that address, so allow the handler to return VM_FAULT_LOCKED
and set the fault_page to be NULL.  This indicates to the MM code that the
i_mmap_lock is held instead of the page lock.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

DAX is a replacement for the variation of XIP currently supported by the
ext2 filesystem.  We have three different things in the tree called 'XIP',
and the new focus is on access to data rather than executables, so a name
change was in order.  DAX stands for Direct Access.  The X is for
eXciting.

The new focus on data access has resulted in more careful attention to
races that exist in the current XIP code, but are not hit by the use-case
that it was designed for.  XIP's architecture worked fine for ext2, but
DAX is architected to work with modern filsystems such as ext4 and XFS.
DAX is not intended for use with btrfs; the value that btrfs adds relies
on manipulating data and writing data to different locations, while DAX's
value is for write-in-place and keeping the kernel from touching the data.

DAX was developed in order to support NV-DIMMs, but it's become clear that
its usefuless extends beyond NV-DIMMs and there are several potential
customers including the tracing machinery.  Other people want to place the
kernel log in an area of memory, as long as they have a BIOS that does not
clear DRAM on reboot.

Patch 1 is a bug fix, probably worth including in 3.18.

Patches 2 & 3 are infrastructure for DAX.

Patches 4-8 replace the XIP code with its DAX equivalents, transforming
ext2 to use the DAX code as we go.  Note that patch 10 is the
Documentation patch.

Patches 9-15 clean up after the XIP code, removing the infrastructure
that is no longer needed and renaming various XIP things to DAX.
Most of these patches were added after Jan found things he didn't
like in an earlier version of the ext4 patch ... that had been copied
from ext2.  So ext2 i being transformed to do things the same way that
ext4 will later.  The ability to mount ext2 filesystems with the 'xip'
option is retained, although the 'dax' option is now preferred.

Patch 16 adds some DAX infrastructure to support ext4.

Patch 17 adds DAX support to ext4.  It is broadly similar to ext2's DAX
support, but it is more efficient than ext4's due to its support for
unwritten extents.

Patch 18 is another cleanup patch renaming XIP to DAX.

My thanks to Mathieu Desnoyers for his reviews of the v11 patchset.  Most
of the changes below were based on his feedback.

This patch (of 18):

Pagecache faults recheck i_size after taking the page lock to ensure that
the fault didn't race against a truncate.  We don't have a page to lock in
the XIP case, so use i_mmap_lock_read() instead.  It is locked in the
truncate path in unmap_mapping_range() after updating i_size.  So while we
hold it in the fault path, we are guaranteed that either i_size has
already been updated in the truncate path, or that the truncate will
subsequently call zap_page_range_single() and so remove the mapping we
have just inserted.

There is a window of time in which i_size has been reduced and the thread
has a mapping to a page which will be removed from the file, but this is
harmless as the page will not be allocated to a different purpose before
the thread's access to it is revoked.

[akpm@linux-foundation.org: switch to i_mmap_lock_read(), add comment in unmap_single_vma()]
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For whatever reason, generic_access_phys() only remaps one page, but
actually allows to access arbitrary size.  It's quite easy to trigger
large reads, like printing out large structure with gdb, which leads to a
crash.  Fix it by remapping correct size.

Fixes: 28b2ee20 ("access_process_vm device memory infrastructure")
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pte_protnone_numa is only safe to use after VMA checks for PROT_NONE are
complete.  Treating a real PROT_NONE PTE as a NUMA hinting fault is going
to result in strangeness so add a check for it.  BUG_ON looks like
overkill but if this is hit then it's a serious bug that could result in
corruption so do not even try recovering.  It would have been more
comprehensive to check VMA flags in pte_protnone_numa but it would have
made the API ugly just for a debugging check.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Faults on the huge zero page are pointless and there is a BUG_ON to catch
them during fault time.  This patch reintroduces a check that avoids
marking the zero page PAGE_NONE.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With PROT_NONE, the traditional page table manipulation functions are
sufficient.

[andre.przywara@arm.com: fix compiler warning in pmdp_invalidate()]
[akpm@linux-foundation.org: fix build with STRICT_MM_TYPECHECKS]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NAneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert existing users of pte_numa and friends to the new helper.  Note
that the kernel is broken after this patch is applied until the other page
table modifiers are also altered.  This patch layout is to make review
easier.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NAneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup.  The trick is to allocate a lot of PMD page tables.  Linux
kernel doesn't account PMD tables to the process, only PTE.

The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low.  oom_score for the process will be 0.

	#include <errno.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <sys/mman.h>
	#include <sys/prctl.h>

	#define PUD_SIZE (1UL << 30)
	#define PMD_SIZE (1UL << 21)

	#define NR_PUD 130000

	int main(void)
	{
		char *addr = NULL;
		unsigned long i;

		prctl(PR_SET_THP_DISABLE);
		for (i = 0; i < NR_PUD ; i++) {
			addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
					MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
			if (addr == MAP_FAILED) {
				perror("mmap");
				break;
			}
			*addr = 'x';
			munmap(addr, PMD_SIZE);
			mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
					MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
			if (addr == MAP_FAILED)
				perror("re-mmap"), exit(1);
		}
		printf("PID %d consumed %lu KiB in PMD page tables\n",
				getpid(), i * 4096 >> 10);
		return pause();
	}

The patch addresses the issue by account PMD tables to the process the
same way we account PTE.

The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:

 - HugeTLB can share PMD page tables. The patch handles by accounting
   the table to all processes who share it.

 - x86 PAE pre-allocates few PMD tables on fork.

 - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
   check on exit(2).

Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded).  As with nr_ptes we use per-mm counter.  The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Whether there is a vm_ops->page_mkwrite or not, the page dirtying is
pretty much the same.  Make sure the page references are the same in both
cases, then merge the two branches.

It's tempting to go even further and page-lock the !page_mkwrite case, to
get it in line with everybody else setting the page table and thus further
simplify the model.  But that's not quite compelling enough to justify
dropping the pte lock, then relocking and verifying the entry for
filesystems without ->page_mkwrite, which notably includes tmpfs.  Leave
it for now and lock the page late in the !page_mkwrite case.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Shared anonymous mmaps are implemented with shmem files, so all VMAs with
shared writable semantics also have an underlying backing file.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One bit in ->vm_flags is unused now!
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't create non-linear mappings anymore.  Let's drop code which
handles them on page fault.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have remap_file_pages(2) emulation in -mm tree for few release cycles
and we plan to have it mainline in v3.20. This patchset removes rest of
VM_NONLINEAR infrastructure.

Patches 1-8 take care about generic code. They are pretty
straight-forward and can be applied without other of patches.

Rest patches removes pte_file()-related stuff from architecture-specific
code. It usually frees up one bit in non-present pte. I've tried to reuse
that bit for swap offset, where I was able to figure out how to do that.

For obvious reason I cannot test all that arch-specific code and would
like to see acks from maintainers.

In total, remap_file_pages(2) required about 1.4K lines of not-so-trivial
kernel code. That's too much for functionality nobody uses.
Tested-by: NFelipe Balbi <balbi@ti.com>

This patch (of 38):

We don't create non-linear mappings anymore. Let's drop code which
handles them on unmap/zap.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The stack guard page error case has long incorrectly caused a SIGBUS
rather than a SIGSEGV, but nobody actually noticed until commit
fee7e49d ("mm: propagate error from stack expansion even for guard
page") because that error case was never actually triggered in any
normal situations.

Now that we actually report the error, people noticed the wrong signal
that resulted.  So far, only the test suite of libsigsegv seems to have
actually cared, but there are real applications that use libsigsegv, so
let's not wait for any of those to break.
Reported-and-tested-by: NTakashi Iwai <tiwai@suse.de>
Tested-by: NJan Engelhardt <jengelh@inai.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The optional find_special_page VMA operation is used to lookup the
pages backing a VMA.  This is useful in cases where the normal
mechanisms for finding the page don't work.  This is only called if
the PTE is special.

One use case is a Xen PV guest mapping foreign pages into userspace.

In a Xen PV guest, the PTEs contain MFNs so get_user_pages() (for
example) must do an MFN to PFN (M2P) lookup before it can get the
page.  For foreign pages (those owned by another guest) the M2P lookup
returns the PFN as seen by the foreign guest (which would be
completely the wrong page for the local guest).

This cannot be fixed up improving the M2P lookup since one MFN may be
mapped onto two or more pages so getting the right page is impossible
given just the MFN.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>

When batching up address ranges for TLB invalidation, we check tlb->end
!= 0 to indicate that some pages have actually been unmapped.

As of commit f045bbb9 ("mmu_gather: fix over-eager
tlb_flush_mmu_free() calling"), we use the same check for freeing these
pages in order to avoid a performance regression where we call
free_pages_and_swap_cache even when no pages are actually queued up.

Unfortunately, the range could have been reset (tlb->end = 0) by
tlb_end_vma, which has been shown to cause memory leaks on arm64.
Furthermore, investigation into these leaks revealed that the fullmm
case on task exit no longer invalidates the TLB, by virtue of tlb->end
 == 0 (in 3.18, need_flush would have been set).

This patch resolves the problem by reverting commit f045bbb9, using
instead tlb->local.nr as the predicate for page freeing in
tlb_flush_mmu_free and ensuring that tlb->end is initialised to a
non-zero value in the fullmm case.
Tested-by: NMark Langsdorf <mlangsdo@redhat.com>
Tested-by: NDave Hansen <dave@sr71.net>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tejun, while reviewing the code, spotted the following race condition
between the dirtying and truncation of a page:

__set_page_dirty_nobuffers()       __delete_from_page_cache()
  if (TestSetPageDirty(page))
                                     page->mapping = NULL
				     if (PageDirty())
				       dec_zone_page_state(page, NR_FILE_DIRTY);
				       dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
    if (page->mapping)
      account_page_dirtied(page)
        __inc_zone_page_state(page, NR_FILE_DIRTY);
	__inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);

which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE.

Dirtiers usually lock out truncation, either by holding the page lock
directly, or in case of zap_pte_range(), by pinning the mapcount with
the page table lock held.  The notable exception to this rule, though,
is do_wp_page(), for which this race exists.  However, do_wp_page()
already waits for a locked page to unlock before setting the dirty bit,
in order to prevent a race where clear_page_dirty() misses the page bit
in the presence of dirty ptes.  Upgrade that wait to a fully locked
set_page_dirty() to also cover the situation explained above.

Afterwards, the code in set_page_dirty() dealing with a truncation race
is no longer needed.  Remove it.
Reported-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jay Foad reports that the address sanitizer test (asan) sometimes gets
confused by a stack pointer that ends up being outside the stack vma
that is reported by /proc/maps.

This happens due to an interaction between RLIMIT_STACK and the guard
page: when we do the guard page check, we ignore the potential error
from the stack expansion, which effectively results in a missing guard
page, since the expected stack expansion won't have been done.

And since /proc/maps explicitly ignores the guard page (commit
d7824370: "mm: fix up some user-visible effects of the stack guard
page"), the stack pointer ends up being outside the reported stack area.

This is the minimal patch: it just propagates the error.  It also
effectively makes the guard page part of the stack limit, which in turn
measn that the actual real stack is one page less than the stack limit.

Let's see if anybody notices.  We could teach acct_stack_growth() to
allow an extra page for a grow-up/grow-down stack in the rlimit test,
but I don't want to add more complexity if it isn't needed.
Reported-and-tested-by: NJay Foad <jay.foad@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>