- 23 1月, 2006 9 次提交
-
-
由 Kyle McMartin 提交于
Remove a bunch of obsolete code from process.c, these routines were likely imported from the i386 version of process.c when the port started. The routines are only used in floppy.c, which I seriously doubt will ever work on parisc, due to architectural assumptions. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Move the EXPORT_SYMBOL() of pm_power_off from parisc_ksyms.c to the location of its definition in process.c Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Avoid compiler warning for unused variables on 32bit kernels by conditionalizing the local variables on CONFIG_64BIT. PCI_HOST_ADDR() only uses the hba argument on 64bit compiles. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Instead of wrapping the define of COMMAND_GLOBAL in #ifdef __LP64__ use the F_EXTEND() macro defined in asm/io.h, which is the preferred way of extending mmio space addresses for either 32 or 64 bit machines. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 James Bottomley 提交于
Fix our trap handler to issue the correct floating point exception for both types of invalid trap. Signed-off-by: NJames Bottomley <jejb@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Drop the unused do_check_pgt_cache routine from mm/init.c and its prototype in asm/pgalloc.h Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Grant Grundler 提交于
Remove two unnecessary extern declarations from asm/pci.h. They collide with what gcc4.0 assumed was static (and should be static). Found by Joel Soete. Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Helge, o Convert a bunch of kmalloc/memset uses to kzalloc. o pci.c: Add some __read_mostly annotations. o pci.c: Move constant pci_post_reset_delay to asm/pci.h o grfioctl.h: Add A4450A to comment of CRT_ID_VISUALIZE_EG. o Add some consts to perf.c/perf_images.h Matthew, o sticore.c: Add some consts to suppress compile warnings. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Update b180_defconfig to be more usable on other similar machines. Enabling Lasi 82596, Harmony, Mux console, CCIO, HPPB, etc., means this config is suitable for not only BXXX machines, but also CXXX and JXXX class machines. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 22 1月, 2006 1 次提交
-
-
由 Matthew Wilcox 提交于
Make flush_tlb_all_local take a void * so it doesn't have to be cast when using on_each_cpu(). This becomes a problem when on_each_cpu is a macro. Also remove the prototype of flush_tlb_all_local from .c files. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 19 1月, 2006 1 次提交
-
-
由 Jesse Brandeburg 提交于
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 14 1月, 2006 1 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 1月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 1 次提交
-
-
由 Randy Dunlap 提交于
arch: Use <linux/capability.h> where capable() is used. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 1月, 2006 9 次提交
-
-
由 Matthew Wilcox 提交于
Cleanup vmlinux.lds.S by using STABS_DEBUG macro from vmlinux.lds.h instead of repeating the sections. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Fix Dino reporting on J2240. This particular machine thought it had a Cujo. Also add J2240 Dino chip to the hp_hardware_list. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Grant Grundler 提交于
max_low_pfn was not being set in arch/parisc/mm/init.c, causing severe problems whenever anything tried to use BLK_BOUNCE_HIGH. Set it to max_pfn like other similar architectures do. Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Make knapps work with its 64MB gfx card. I probably just broke another machine in the process, but assuming 64MB when 64MB aligned is probably safer than assuming 32MB all the time. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Fixup ioremap a bit. It seems to work on 32-bit kernels, but fails miserably on the first ioremapped access on 64-bit kernels. Also, having STI enabled causes it to fail. Probably because we're passing an ioremapped region to a real-mode STI call... Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Make flush_data_cache_local, flush_instruction_cache_local and flush_tlb_all_local take a void * so they don't have to be cast when using on_each_cpu(). This becomes a problem when on_each_cpu is a macro (as it is in current -mm). Also move the prototype of flush_tlb_all_local into tlbflush.h and remove its declaration from .c files. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Flag a whole bunch of things as __read_mostly on parisc. Also flag a few branches as unlikely() and cleanup a bit of code. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Christoph Hellwig 提交于
Now that all these entries in the arch ioctl32.c files are gone [1], we can build fs/compat_ioctl.c as a normal object and kill tons of cruft. We need a special do_ioctl32_pointer handler for s390 so the compat_ptr call is done. This is not needed but harmless on all other architectures. Also remove some superflous includes in fs/compat_ioctl.c Tested on ppc64. [1] parisc still had it's PPP handler left, which is not fully correct for ppp and besides that ppp uses the generic SIOCPRIV ioctl so it'd kick in for all netdevice users. We can introduce a proper handler in one of the next patch series by adding a compat_ioctl method to struct net_device but for now let's just kill it - parisc doesn't compile in mainline anyway and I don't want this to block this patchset. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
This patch implements generic handling of RTC_IRQP_READ32, RTC_IRQP_SET32, RTC_EPOCH_READ32 and RTC_EPOCH_SET32 in fs/compat_ioctl.c. It's based on the x86_64 code which needed a little massaging to be endian-clean. parisc used COMPAT_IOCTL or generic w_long handlers for these whichce is wrong and can't work because the ioctls encode sizeof(unsigned long) in their ioctl number. parisc also duplicated COMPAT_IOCTL entries for other rtc ioctls which I remove in this patch, too. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NMatthew Wilcox <matthew@wil.cx> Acked-by: N"David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 1月, 2006 1 次提交
-
-
由 Matt Mackall 提交于
Configurable 16-bit UID and friends support This allows turning off the legacy 16 bit UID interfaces on embedded platforms. text data bss dec hex filename 3330172 529036 190556 4049764 3dcb64 vmlinux-baseline 3328268 529040 190556 4047864 3dc3f8 vmlinux From: Adrian Bunk <bunk@stusta.de> UID16 was accidentially disabled for !EMBEDDED. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 11月, 2005 14 次提交
-
-
由 Grant Grundler 提交于
Remove unused variable "struct siginfo si" in signal.c Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Christoph Hellwig 提交于
Remove drm compat_ioctl handlers. The drm drivers have proper compat_ioctl methods these days. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Christoph Hellwig 提交于
Move PA perf driver over to ->compat_ioctl. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRandolph Chung <tausq@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Fix some compile problems: - ret wasn't being initialised in all code paths - I'm pretty sure 'goto out' should have been 'goto out_tsk' Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Improve the error message when we get a clashing mod path, and actually display the IODC data and path for the conflicting device. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Return PDC_OK when device registration fails so that we enumerate all subsequent devices, even when we get two devices with the same hardware path (which should never happen, but does with at least one revision of rp8400 firmware). Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Carlos O'Donell 提交于
Document clobbers and args in entry.S and syscall.S. entry.S: Add comment to indicate that cr27 may recycle and EDEADLOCK detection is not 100% correct. Since this is only enabled when using ENABLE_LWS_DEBUG, the user is warned by the comment. Signed-off-by: NCarlos O'Donell <carlos@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
Make the "redirecting irq" message to not display on the console by setting the severity to KERN_DEBUG. The console was basically unusable. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Grant Grundler 提交于
irq_affinityp[] only available for SMP builds, make code that uses it conditional on CONFIG_SMP. Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 James Bottomley 提交于
This really only adds them for the machines I can check SMP on, which is CPU interrupts and IOSAPIC (so not any of the GSC based machines). With this patch, irqbalanced can be used to maintain irq balancing. Unfortunately, irqbalanced is a bit x86 centric, so it doesn't do an incredibly good job, but it does work. Signed-off-by: NJames Bottomley <jejb@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Since irq.c uses smp_send_all_nop, we must define it for UP builds as well. Make it a static inline so it gets optimized away. This forces irq.c to include <asm/smp.h> though. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 James Bottomley 提交于
Fix our interrupts not to use smp_call_function On K and D class smp, the generic code calls this under an irq spinlock, which causes the WARN_ON() message in smp_call_function() (and is also illegal because it could deadlock). The fix is to use a new scheme based on the IPI_NOP. Signed-off-by: NJames Bottomley <jejb@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Grant Grundler 提交于
Disable nesting of interrupts - still has holes The offending sequence starts out like this: 1) take external interrupt 2) set_eiem() to only allow TIMER_IRQ; local interrupts still disabled 3) read the EIRR to get a "list" of pending interrupts 4) clear EIRR of pending interrupts we intend to handle 5) call __do_IRQ() to handle IRQ. 6) handle_IRQ_event() enables local interrupts (I-Bit) 7) take a timer interrupt 8) read EIRR to get a new list of pending interrupts 9) clear EIRR of pending interrupts we just read 10) handle pending interrupts found in (8) 11) set_eiem(cpu_eiem) and return [ TROUBLE! all enabled CPU IRQs are unmasked. } 12) handle remaining interrupts pending from (3) e.g. call __do_IRQ() -> handle_IRQ_event()..etc [ TROUBLE! call to handle_IRQ_event() can now enable *any* IRQ. } 13) set_eiem(cpu_eiem) and return The problem is we now get into ugly race conditions with Timer and IPI interrupts at this point. I'm not exactly sure what happens when things go wrong (perhaps nest calls to IPI or timer interrupt?). But I'm certain it's not good. This sequence will break sooner if (10) would accidentally leave interrupts enabled. I'm pretty sure the right answer is now to make cpu_eiem a per CPU variable since all external interrupts on parisc are per CPU. This means we will NOT need to send an IPI to every CPU in the system when enabling or disabling an IRQ since only one CPU needs to change it's EIEM. Thanks to James Bottomley for (once again) pointing out the problem. Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 James Bottomley 提交于
Fix a longstanding smp bug The problem is that both the timer and ipi interrupts are being called with interrupts enabled, which isn't what anyone is expecting. The IPI issue has just started to show up by causing a BUG_ON in the slab debugging code. The timer issue never shows up because there's an eiem work around in our irq.c The fix is to label both these as SA_INTERRUPT which causes the generic irq code not to enable interrupts. I also suspect the smp_call_function timeouts we're seeing might be connected with the fact that we disable IPIs when handling any other type of interrupt. I've put a WARN_ON in the code for executing smp_call_function() with IPIs disabled. Signed-off-by: NJames Bottomley <jejb@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 09 11月, 2005 2 次提交
-
-
由 Nick Piggin 提交于
Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Run idle threads with preempt disabled. Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()). How did it ever work before? Might fix the CPU hotplugging hang which Nigel Cunningham noted. We think the bug hits if the idle thread is preempted after checking need_resched() and before going to sleep, then the CPU offlined. After calling stop_machine_run, the CPU eventually returns from preemption and into the idle thread and goes to sleep. The CPU will continue executing previous idle and have no chance to call play_dead. By disabling preemption until we are ready to explicitly schedule, this bug is fixed and the idle threads generally become more robust. From: alexs <ashepard@u.washington.edu> PPC build fix From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> MIPS build fix Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-