Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 04 6月, 2017 19 次提交
  3. 27 5月, 2017 5 次提交
  5. 26 5月, 2017 3 次提交
    • D
      bpf: fix wrong exposure of map_flags into fdinfo for lpm · a316338c
      由 Daniel Borkmann 提交于 
      trie_alloc() always needs to have BPF_F_NO_PREALLOC passed in via
attr->map_flags, since it does not support preallocation yet. We
check the flag, but we never copy the flag into trie->map.map_flags,
which is later on exposed into fdinfo and used by loaders such as
iproute2. Latter uses this in bpf_map_selfcheck_pinned() to test
whether a pinned map has the same spec as the one from the BPF obj
file and if not, bails out, which is currently the case for lpm
since it exposes always 0 as flags.

Also copy over flags in array_map_alloc() and stack_map_alloc().
They always have to be 0 right now, but we should make sure to not
miss to copy them over at a later point in time when we add actual
flags for them to use.

Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation")
Reported-by: NJarno Rajahalme <jarno@covalent.io>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a316338c
    • D
      bpf: properly reset caller saved regs after helper call and ld_abs/ind · a9789ef9
      由 Daniel Borkmann 提交于 
      Currently, after performing helper calls, we clear all caller saved
registers, that is r0 - r5 and fill r0 depending on struct bpf_func_proto
specification. The way we reset these regs can affect pruning decisions
in later paths, since we only reset register's imm to 0 and type to
NOT_INIT. However, we leave out clearing of other variables such as id,
min_value, max_value, etc, which can later on lead to pruning mismatches
due to stale data.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a9789ef9
    • D
      bpf: fix incorrect pruning decision when alignment must be tracked · 1ad2f583
      由 Daniel Borkmann 提交于 
      Currently, when we enforce alignment tracking on direct packet access,
the verifier lets the following program pass despite doing a packet
write with unaligned access:

  0: (61) r2 = *(u32 *)(r1 +76)
  1: (61) r3 = *(u32 *)(r1 +80)
  2: (61) r7 = *(u32 *)(r1 +8)
  3: (bf) r0 = r2
  4: (07) r0 += 14
  5: (25) if r7 > 0x1 goto pc+4
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
  6: (2d) if r0 > r3 goto pc+1
   R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14)
   R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
  7: (63) *(u32 *)(r0 -4) = r0
  8: (b7) r0 = 0
  9: (95) exit

  from 6 to 8:
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
  8: (b7) r0 = 0
  9: (95) exit

  from 5 to 10:
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=2 R10=fp
  10: (07) r0 += 1
  11: (05) goto pc-6
  6: safe                           <----- here, wrongly found safe
  processed 15 insns

However, if we enforce a pruning mismatch by adding state into r8
which is then being mismatched in states_equal(), we find that for
the otherwise same program, the verifier detects a misaligned packet
access when actually walking that path:

  0: (61) r2 = *(u32 *)(r1 +76)
  1: (61) r3 = *(u32 *)(r1 +80)
  2: (61) r7 = *(u32 *)(r1 +8)
  3: (b7) r8 = 1
  4: (bf) r0 = r2
  5: (07) r0 += 14
  6: (25) if r7 > 0x1 goto pc+4
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=0,max_value=1
   R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
  7: (2d) if r0 > r3 goto pc+1
   R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14)
   R3=pkt_end R7=inv,min_value=0,max_value=1
   R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
  8: (63) *(u32 *)(r0 -4) = r0
  9: (b7) r0 = 0
  10: (95) exit

  from 7 to 9:
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=0,max_value=1
   R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
  9: (b7) r0 = 0
  10: (95) exit

  from 6 to 11:
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=2
   R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
  11: (07) r0 += 1
  12: (b7) r8 = 0
  13: (05) goto pc-7                <----- mismatch due to r8
  7: (2d) if r0 > r3 goto pc+1
   R0=pkt(id=0,off=15,r=15) R1=ctx R2=pkt(id=0,off=0,r=15)
   R3=pkt_end R7=inv,min_value=2
   R8=imm0,min_value=0,max_value=0,min_align=2147483648 R10=fp
  8: (63) *(u32 *)(r0 -4) = r0
  misaligned packet access off 2+15+-4 size 4

The reason why we fail to see it in states_equal() is that the
third test in compare_ptrs_to_packet() ...

  if (old->off <= cur->off &&
      old->off >= old->range && cur->off >= cur->range)
          return true;

... will let the above pass. The situation we run into is that
old->off <= cur->off (14 <= 15), meaning that prior walked paths
went with smaller offset, which was later used in the packet
access after successful packet range check and found to be safe
already.

For example: Given is R0=pkt(id=0,off=0,r=0). Adding offset 14
as in above program to it, results in R0=pkt(id=0,off=14,r=0)
before the packet range test. Now, testing this against R3=pkt_end
with 'if r0 > r3 goto out' will transform R0 into R0=pkt(id=0,off=14,r=14)
for the case when we're within bounds. A write into the packet
at offset *(u32 *)(r0 -4), that is, 2 + 14 -4, is valid and
aligned (2 is for NET_IP_ALIGN). After processing this with
all fall-through paths, we later on check paths from branches.
When the above skb->mark test is true, then we jump near the
end of the program, perform r0 += 1, and jump back to the
'if r0 > r3 goto out' test we've visited earlier already. This
time, R0 is of type R0=pkt(id=0,off=15,r=0), and we'll prune
that part because this time we'll have a larger safe packet
range, and we already found that with off=14 all further insn
were already safe, so it's safe as well with a larger off.
However, the problem is that the subsequent write into the packet
with 2 + 15 -4 is then unaligned, and not caught by the alignment
tracking. Note that min_align, aux_off, and aux_off_align were
all 0 in this example.

Since we cannot tell at this time what kind of packet access was
performed in the prior walk and what minimal requirements it has
(we might do so in the future, but that requires more complexity),
fix it to disable this pruning case for strict alignment for now,
and let the verifier do check such paths instead. With that applied,
the test cases pass and reject the program due to misalignment.

Fixes: d1174416 ("bpf: Track alignment of register values in the verifier.")
Reference: http://patchwork.ozlabs.org/patch/761909/Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1ad2f583
  7. 24 5月, 2017 1 次提交
  9. 23 5月, 2017 4 次提交
    • E
      ptrace: Properly initialize ptracer_cred on fork · c70d9d80
      由 Eric W. Biederman 提交于 
      When I introduced ptracer_cred I failed to consider the weirdness of
fork where the task_struct copies the old value by default.  This
winds up leaving ptracer_cred set even when a process forks and
the child process does not wind up being ptraced.

Because ptracer_cred is not set on non-ptraced processes whose
parents were ptraced this has broken the ability of the enlightenment
window manager to start setuid children.

Fix this by properly initializing ptracer_cred in ptrace_init_task

This must be done with a little bit of care to preserve the current value
of ptracer_cred when ptrace carries through fork.  Re-reading the
ptracer_cred from the ptracing process at this point is inconsistent
with how PT_PTRACE_CAP has been maintained all of these years.
Tested-by: NTakashi Iwai <tiwai@suse.de>
Fixes: 64b875f7 ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
      c70d9d80
    • V
      kthread: Fix use-after-free if kthread fork fails · 4d6501dc
      由 Vegard Nossum 提交于 
      If a kthread forks (e.g. usermodehelper since commit 1da5c46f) but
fails in copy_process() between calling dup_task_struct() and setting
p->set_child_tid, then the value of p->set_child_tid will be inherited
from the parent and get prematurely freed by free_kthread_struct().

    kthread()
     - worker_thread()
        - process_one_work()
        |  - call_usermodehelper_exec_work()
        |     - kernel_thread()
        |        - _do_fork()
        |           - copy_process()
        |              - dup_task_struct()
        |                 - arch_dup_task_struct()
        |                    - tsk->set_child_tid = current->set_child_tid // implied
        |              - ...
        |              - goto bad_fork_*
        |              - ...
        |              - free_task(tsk)
        |                 - free_kthread_struct(tsk)
        |                    - kfree(tsk->set_child_tid)
        - ...
        - schedule()
           - __schedule()
              - wq_worker_sleeping()
                 - kthread_data(task)->flags // UAF

The problem started showing up with commit 1da5c46f since it reused
->set_child_tid for the kthread worker data.

A better long-term solution might be to get rid of the ->set_child_tid
abuse. The comment in set_kthread_struct() also looks slightly wrong.
Debugged-by: NJamie Iles <jamie.iles@oracle.com>
Fixes: 1da5c46f ("kthread: Make struct kthread kmalloc'ed")
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170509073959.17858-1-vegard.nossum@oracle.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      4d6501dc
    • P
      futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock() · 04dc1b2f
      由 Peter Zijlstra 提交于 
      Markus reported that the glibc/nptl/tst-robustpi8 test was failing after
commit:

  cfafcd11 ("futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()")

The following trace shows the problem:

 ld-linux-x86-64-2161  [019] ....   410.760971: SyS_futex: 00007ffbeb76b028: 80000875  op=FUTEX_LOCK_PI
 ld-linux-x86-64-2161  [019] ...1   410.760972: lock_pi_update_atomic: 00007ffbeb76b028: curval=80000875 uval=80000875 newval=80000875 ret=0
 ld-linux-x86-64-2165  [011] ....   410.760978: SyS_futex: 00007ffbeb76b028: 80000875  op=FUTEX_UNLOCK_PI
 ld-linux-x86-64-2165  [011] d..1   410.760979: do_futex: 00007ffbeb76b028: curval=80000875 uval=80000875 newval=80000871 ret=0
 ld-linux-x86-64-2165  [011] ....   410.760980: SyS_futex: 00007ffbeb76b028: 80000871 ret=0000
 ld-linux-x86-64-2161  [019] ....   410.760980: SyS_futex: 00007ffbeb76b028: 80000871 ret=ETIMEDOUT

Task 2165 does an UNLOCK_PI, assigning the lock to the waiter task 2161
which then returns with -ETIMEDOUT. That wrecks the lock state, because now
the owner isn't aware it acquired the lock and removes the pending robust
list entry.

If 2161 is killed, the robust list will not clear out this futex and the
subsequent acquire on this futex will then (correctly) result in -ESRCH
which is unexpected by glibc, triggers an internal assertion and dies.

Task 2161			Task 2165

rt_mutex_wait_proxy_lock()
   timeout();
   /* T2161 is still queued in  the waiter list */
   return -ETIMEDOUT;

				futex_unlock_pi()
				spin_lock(hb->lock);
				rtmutex_unlock()
				  remove_rtmutex_waiter(T2161);
				   mark_lock_available();
				/* Make the next waiter owner of the user space side */
				futex_uval = 2161;
				spin_unlock(hb->lock);
spin_lock(hb->lock);
rt_mutex_cleanup_proxy_lock()
  if (rtmutex_owner() !== current)
     ...
     return FAIL;
....
return -ETIMEOUT;

This means that rt_mutex_cleanup_proxy_lock() needs to call
try_to_take_rt_mutex() so it can take over the rtmutex correctly which was
assigned by the waker. If the rtmutex is owned by some other task then this
call is harmless and just confirmes that the waiter is not able to acquire
it.

While there, fix what looks like a merge error which resulted in
rt_mutex_cleanup_proxy_lock() having two calls to
fixup_rt_mutex_waiters() and rt_mutex_wait_proxy_lock() not having any.
Both should have one, since both potentially touch the waiter list.

Fixes: 38d589f2 ("futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()")
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Bug-Spotted-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: http://lkml.kernel.org/r/20170519154850.mlomgdsd26drq5j6@hirez.programming.kicks-ass.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      04dc1b2f
    • D
      net: Make IP alignment calulations clearer. · e4eda884
      由 David S. Miller 提交于 
      The assignmnet:

	ip_align = strict ? 2 : NET_IP_ALIGN;

in compare_pkt_ptr_alignment() trips up Coverity because we can only
get to this code when strict is true, therefore ip_align will always
be 2 regardless of NET_IP_ALIGN's value.

So just assign directly to '2' and explain the situation in the
comment above.
Reported-by: N"Gustavo A. R. Silva" <garsilva@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e4eda884
  11. 19 5月, 2017 2 次提交
  13. 18 5月, 2017 6 次提交
    • D
      bpf: adjust verifier heuristics · 3c2ce60b
      由 Daniel Borkmann 提交于 
      Current limits with regards to processing program paths do not
really reflect today's needs anymore due to programs becoming
more complex and verifier smarter, keeping track of more data
such as const ALU operations, alignment tracking, spilling of
PTR_TO_MAP_VALUE_ADJ registers, and other features allowing for
smarter matching of what LLVM generates.

This also comes with the side-effect that we result in fewer
opportunities to prune search states and thus often need to do
more work to prove safety than in the past due to different
register states and stack layout where we mismatch. Generally,
it's quite hard to determine what caused a sudden increase in
complexity, it could be caused by something as trivial as a
single branch somewhere at the beginning of the program where
LLVM assigned a stack slot that is marked differently throughout
other branches and thus causing a mismatch, where verifier
then needs to prove safety for the whole rest of the program.
Subsequently, programs with even less than half the insn size
limit can get rejected. We noticed that while some programs
load fine under pre 4.11, they get rejected due to hitting
limits on more recent kernels. We saw that in the vast majority
of cases (90+%) pruning failed due to register mismatches. In
case of stack mismatches, majority of cases failed due to
different stack slot types (invalid, spill, misc) rather than
differences in spilled registers.

This patch makes pruning more aggressive by also adding markers
that sit at conditional jumps as well. Currently, we only mark
jump targets for pruning. For example in direct packet access,
these are usually error paths where we bail out. We found that
adding these markers, it can reduce number of processed insns
by up to 30%. Another option is to ignore reg->id in probing
PTR_TO_MAP_VALUE_OR_NULL registers, which can help pruning
slightly as well by up to 7% observed complexity reduction as
stand-alone. Meaning, if a previous path with register type
PTR_TO_MAP_VALUE_OR_NULL for map X was found to be safe, then
in the current state a PTR_TO_MAP_VALUE_OR_NULL register for
the same map X must be safe as well. Last but not least the
patch also adds a scheduling point and bumps the current limit
for instructions to be processed to a more adequate value.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3c2ce60b
    • S
      kprobes: Document how optimized kprobes are removed from module unload · 545a0281
      由 Steven Rostedt (VMware) 提交于 
      Thomas discovered a bug where the kprobe trace tests had a race
condition where the kprobe_optimizer called from a delayed work queue
that does the optimizing and "unoptimizing" of a kprobe, can try to
modify the text after it has been freed by the init code.

The kprobe trace selftest is a special case, and Thomas and myself
investigated to see if there's a chance that this could also be a bug
with module unloading, as the code is not obvious to how it handles
this. After adding lots of printks, I figured it out. Thomas suggested
that this should be commented so that others will not have to go
through this exercise again.

Link: http://lkml.kernel.org/r/20170516145835.3827d3aa@gandalf.local.homeAcked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      545a0281
    • S
      ftrace: Remove #ifdef from code and add clear_ftrace_function_probes() stub · 8a49f3e0
      由 Steven Rostedt (VMware) 提交于 
      No need to add ugly #ifdefs in the code. Having a standard stub file is much
prettier.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      8a49f3e0
    • N
      ftrace/instances: Clear function triggers when removing instances · a0e6369e
      由 Naveen N. Rao 提交于 
      If instance directories are deleted while there are registered function
triggers:

  # cd /sys/kernel/debug/tracing/instances
  # mkdir test
  # echo "schedule:enable_event:sched:sched_switch" > test/set_ftrace_filter
  # rmdir test
  Unable to handle kernel paging request for data at address 0x00000008
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048
  NUMA
  pSeries
  Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc kvm iptable_filter fuse binfmt_misc pseries_rng rng_core vmx_crypto ib_iser rdma_cm iw_cm ib_cm ib_core libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c multipath virtio_net virtio_blk virtio_pci crc32c_vpmsum virtio_ring virtio
  CPU: 8 PID: 8694 Comm: rmdir Not tainted 4.11.0-nnr+ #113
  task: c0000000bab52800 task.stack: c0000000baba0000
  NIP: c0000000021edde8 LR: c0000000021f0590 CTR: c000000002119620
  REGS: c0000000baba3870 TRAP: 0300   Not tainted  (4.11.0-nnr+)
  MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>
    CR: 22002422  XER: 20000000
  CFAR: 00007fffabb725a8 DAR: 0000000000000008 DSISR: 40000000 SOFTE: 0
  GPR00: c00000000220f750 c0000000baba3af0 c000000003157e00 0000000000000000
  GPR04: 0000000000000040 00000000000000eb 0000000000000040 0000000000000000
  GPR08: 0000000000000000 0000000000000113 0000000000000000 c00000000305db98
  GPR12: c000000002119620 c00000000fd42c00 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 c0000000bab52e90 0000000000000000
  GPR24: 0000000000000000 00000000000000eb 0000000000000040 c0000000baba3bb0
  GPR28: c00000009cb06eb0 c0000000bab52800 c00000009cb06eb0 c0000000baba3bb0
  NIP [c0000000021edde8] ring_buffer_lock_reserve+0x8/0x4e0
  LR [c0000000021f0590] trace_event_buffer_lock_reserve+0xe0/0x1a0
  Call Trace:
  [c0000000baba3af0] [c0000000021f96c8] trace_event_buffer_commit+0x1b8/0x280 (unreliable)
  [c0000000baba3b60] [c00000000220f750] trace_event_buffer_reserve+0x80/0xd0
  [c0000000baba3b90] [c0000000021196b8] trace_event_raw_event_sched_switch+0x98/0x180
  [c0000000baba3c10] [c0000000029d9980] __schedule+0x6e0/0xab0
  [c0000000baba3ce0] [c000000002122230] do_task_dead+0x70/0xc0
  [c0000000baba3d10] [c0000000020ea9c8] do_exit+0x828/0xd00
  [c0000000baba3dd0] [c0000000020eaf70] do_group_exit+0x60/0x100
  [c0000000baba3e10] [c0000000020eb034] SyS_exit_group+0x24/0x30
  [c0000000baba3e30] [c00000000200bcec] system_call+0x38/0x54
  Instruction dump:
  60000000 60420000 7d244b78 7f63db78 4bffaa09 393efff8 793e0020 39200000
  4bfffecc 60420000 3c4c00f7 3842a020 <81230008> 2f890000 409e02f0 a14d0008
  ---[ end trace b917b8985d0e650b ]---
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Faulting instruction address: 0xc0000000021edde8

To address this, let's clear all registered function probes before
deleting the ftrace instance.

Link: http://lkml.kernel.org/r/c5f1ca624043690bd94642bb6bffd3f2fc504035.1494956770.git.naveen.n.rao@linux.vnet.ibm.comReported-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      a0e6369e
    • N
      ftrace: Simplify glob handling in unregister_ftrace_function_probe_func() · cbab567c
      由 Naveen N. Rao 提交于 
      Handle a NULL glob properly and simplify the check.

Link: http://lkml.kernel.org/r/5df74d4ffb4721db6d5a22fa08ca031d62ead493.1494956770.git.naveen.n.rao@linux.vnet.ibm.comReviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      cbab567c
    • T
      tracing/kprobes: Enforce kprobes teardown after testing · 30e7d894
      由 Thomas Gleixner 提交于 
      Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.

The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.

Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.

Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.homeSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6274de49 ("kprobes: Support delayed unoptimizing")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
      30e7d894