- 15 1月, 2018 1 次提交
-
-
由 Johannes Berg 提交于
When creating a new radio on the fly, hwsim allows this to be done with an arbitrary number of channels, but cfg80211 only supports a limited number of simultaneous channels, leading to a warning. Fix this by validating the number - this requires moving the define for the maximum out to a visible header file. Reported-by: syzbot+8dd9051ff19940290931@syzkaller.appspotmail.com Fixes: b59ec8dd ("mac80211_hwsim: fix number of channels in interface combinations") Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 09 1月, 2018 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
syzbot reported a hang involving SCTP, on which it kept flooding dmesg with the message: [ 246.742374] sctp: sctp_transport_update_pmtu: Reported pmtu 508 too low, using default minimum of 512 That happened because whenever SCTP hits an ICMP Frag Needed, it tries to adjust to the new MTU and triggers an immediate retransmission. But it didn't consider the fact that MTUs smaller than the SCTP minimum MTU allowed (512) would not cause the PMTU to change, and issued the retransmission anyway (thus leading to another ICMP Frag Needed, and so on). As IPv4 (ip_rt_min_pmtu=556) and IPv6 (IPV6_MIN_MTU=1280) minimum MTU are higher than that, sctp_transport_update_pmtu() is changed to re-fetch the PMTU that got set after our request, and with that, detect if there was an actual change or not. The fix, thus, skips the immediate retransmission if the received ICMP resulted in no change, in the hope that SCTP will select another path. Note: The value being used for the minimum MTU (512, SCTP_DEFAULT_MINSEGMENT) is not right and instead it should be (576, SCTP_MIN_PMTU), but such change belongs to another patch. Changes from v1: - do not disable PMTU discovery, in the light of commit 06ad3919 ("[SCTP] Don't disable PMTU discovery when mtu is small") and as suggested by Xin Long. - changed the way to break the rtx loop by detecting if the icmp resulted in a change or not Changes from v2: none See-also: https://lkml.org/lkml/2017/12/22/811Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2018 1 次提交
-
-
由 William Tu 提交于
Fix indentation of reserved_flags2 field in vxlanhdr_gpe. Fixes: e1e5314d ("vxlan: implement GPE") Signed-off-by: NWilliam Tu <u9012063@gmail.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 12月, 2017 1 次提交
-
-
由 Tom Herbert 提交于
This allows checking socket lock ownership with producing lockdep warnings. Signed-off-by: NTom Herbert <tom@quantonium.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 12月, 2017 1 次提交
-
-
由 Jakub Kicinski 提交于
cls_bpf used to take care of tracking what offload state a filter is in, i.e. it would track if offload request succeeded or not. This information would then be used to issue correct requests to the driver, e.g. requests for statistics only on offloaded filters, removing only filters which were offloaded, using add instead of replace if previous filter was not added etc. This tracking of offload state no longer functions with the new callback infrastructure. There could be multiple entities trying to offload the same filter. Throw out all the tracking and corresponding commands and simply pass to the drivers both old and new bpf program. Drivers will have to deal with offload state tracking by themselves. Fixes: 3f7889c4 ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2017 2 次提交
-
-
由 Jonathan Corbet 提交于
Commit ca986ad9 (nl80211: allow multiple active scheduled scan requests) removed WIPHY_FLAG_SUPPORTS_SCHED_SCAN but left the kerneldoc description in place, leading to this docs-build warning: ./include/net/cfg80211.h:3278: warning: Excess enum value 'WIPHY_FLAG_SUPPORTS_SCHED_SCAN' description in 'wiphy_flags' Remove the line and gain a bit of peace. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Acked-by: NArend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Herbert Xu 提交于
This is an old bugbear of mine: https://www.mail-archive.com/netdev@vger.kernel.org/msg03894.html By crafting special packets, it is possible to cause recursion in our kernel when processing transport-mode packets at levels that are only limited by packet size. The easiest one is with DNAT, but an even worse one is where UDP encapsulation is used in which case you just have to insert an UDP encapsulation header in between each level of recursion. This patch avoids this problem by reinjecting tranport-mode packets through a tasklet. Fixes: b05e1066 ("[IPV4/6]: Netfilter IPsec input hooks") Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 16 12月, 2017 1 次提交
-
-
由 Yuval Mintz 提交于
Qdiscs can be offloaded to HW, but current implementation isn't uniform. Instead, qdiscs either pass information about offload status via their TCA_OPTIONS or omit it altogether. Introduce a new attribute - TCA_HW_OFFLOAD that would form a uniform uAPI for the offloading status of qdiscs. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 12月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2017 1 次提交
-
-
由 Xin Long 提交于
guehdr struct is used to build or parse gue packets, which are always in big endian. It's better to define all guehdr members as __beXX types. Also, in validate_gue_flags it's not good to use a __be32 variable for both Standard flags(__be16) and Private flags (__be32), and pass it to other funcions. This patch could fix a bunch of sparse warnings from fou. Fixes: 5024c33a ("gue: Add infrastructure for flags and options") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2017 1 次提交
-
-
由 Yousuk Seung 提交于
Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: NYousuk Seung <ysseung@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NPriyaranjan Jha <priyarjha@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2017 3 次提交
-
-
由 Eric Dumazet 提交于
Alexander Potapenko reported use of uninitialized memory [1] This happens when inserting a request socket into TCP ehash, in __sk_nulls_add_node_rcu(), since sk_reuseport is not initialized. Bug was added by commit d894ba18 ("soreuseport: fix ordering for mixed v4/v6 sockets") Note that d296ba60 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") missed the opportunity to get rid of hlist_nulls_add_tail_rcu() : Both UDP sockets and TCP/DCCP listeners no longer use __sk_nulls_add_node_rcu() for their hash insertion. Since all other sockets have unique 4-tuple, the reuseport status has no special meaning, so we can always use hlist_nulls_add_head_rcu() for them and save few cycles/instructions. [1] ================================================================== BUG: KMSAN: use of uninitialized memory in inet_ehash_insert+0xd40/0x1050 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0+ #3288 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x185/0x1d0 lib/dump_stack.c:52 kmsan_report+0x13f/0x1c0 mm/kmsan/kmsan.c:1016 __msan_warning_32+0x69/0xb0 mm/kmsan/kmsan_instr.c:766 __sk_nulls_add_node_rcu ./include/net/sock.h:684 inet_ehash_insert+0xd40/0x1050 net/ipv4/inet_hashtables.c:413 reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:754 inet_csk_reqsk_queue_hash_add+0x1cc/0x300 net/ipv4/inet_connection_sock.c:765 tcp_conn_request+0x31e7/0x36f0 net/ipv4/tcp_input.c:6414 tcp_v4_conn_request+0x16d/0x220 net/ipv4/tcp_ipv4.c:1314 tcp_rcv_state_process+0x42a/0x7210 net/ipv4/tcp_input.c:5917 tcp_v4_do_rcv+0xa6a/0xcd0 net/ipv4/tcp_ipv4.c:1483 tcp_v4_rcv+0x3de0/0x4ab0 net/ipv4/tcp_ipv4.c:1763 ip_local_deliver_finish+0x6bb/0xcb0 net/ipv4/ip_input.c:216 NF_HOOK ./include/linux/netfilter.h:248 ip_local_deliver+0x3fa/0x480 net/ipv4/ip_input.c:257 dst_input ./include/net/dst.h:477 ip_rcv_finish+0x6fb/0x1540 net/ipv4/ip_input.c:397 NF_HOOK ./include/linux/netfilter.h:248 ip_rcv+0x10f6/0x15c0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x36f6/0x3f60 net/core/dev.c:4298 __netif_receive_skb net/core/dev.c:4336 netif_receive_skb_internal+0x63c/0x19c0 net/core/dev.c:4497 napi_skb_finish net/core/dev.c:4858 napi_gro_receive+0x629/0xa50 net/core/dev.c:4889 e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4018 e1000_clean_rx_irq+0x1492/0x1d30 drivers/net/ethernet/intel/e1000/e1000_main.c:4474 e1000_clean+0x43aa/0x5970 drivers/net/ethernet/intel/e1000/e1000_main.c:3819 napi_poll net/core/dev.c:5500 net_rx_action+0x73c/0x1820 net/core/dev.c:5566 __do_softirq+0x4b4/0x8dd kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 irq_exit+0x203/0x240 kernel/softirq.c:405 exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:638 do_IRQ+0x15e/0x1a0 arch/x86/kernel/irq.c:263 common_interrupt+0x86/0x86 Fixes: d894ba18 ("soreuseport: fix ordering for mixed v4/v6 sockets") Fixes: d296ba60 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAlexander Potapenko <glider@google.com> Acked-by: NCraig Gallek <kraig@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Check the qmin & qmax values doesn't overflow for the given Wlog value. Check that qmin <= qmax. Fixes: a7834745 ("[PKT_SCHED]: Generic RED layer") Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Do not allow delta value to be zero since it is used as a divisor. Fixes: 8af2a218 ("sch_red: Adaptative RED AQM") Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2017 1 次提交
-
-
由 David Ahern 提交于
After this fix : ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()"), socket lookups happen while skb->cb[] has not been mangled yet by TCP. Fixes: a04a480d ("net: Require exact match for TCP socket lookups if dif is l3mdev") Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2017 1 次提交
-
-
由 Xin Long 提交于
As rfc3758#section-3.1 demands: A3) When a TSN is "abandoned", if it is part of a fragmented message, all other TSN's within that fragmented message MUST be abandoned at the same time. Besides, if it couldn't handle this, the rest frags would never get assembled in peer side. This patch supports it by adding abandoned flag in sctp_datamsg, when one chunk is being abandoned, set chunk->msg->abandoned as well. Next time when checking for abandoned, go checking chunk->msg->abandoned first. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 11月, 2017 1 次提交
-
-
由 Cong Wang 提交于
Similar to commit d7fb60b9 ("net_sched: get rid of tcfa_rcu"), TC actions don't need to respect RCU grace period, because it is either just detached from tc filter (standalone case) or it is removed together with tc filter (bound case) in which case RCU grace period is already respected at filter layer. Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2017 2 次提交
-
-
由 Xin Long 提交于
Now each stream sched ops is defined in different .c file and added into the global ops in another .c file, it uses extern to make this work. However extern is not good coding style to get them in and even make C=2 reports errors for this. This patch adds sctp_sched_ops_xxx_init for each stream sched ops in their .c file, then get them into the global ops by calling them when initializing sctp module. Fixes: 637784ad ("sctp: introduce priority based stream scheduler") Fixes: ac1ed8b8 ("sctp: introduce round robin stream scheduler") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now sctp_csum_xxx doesn't really match the param types of these common csum apis. As sctp_csum_xxx is defined in sctp/checksum.h, many sparse errors occur when make C=2 not only with M=net/sctp but also with other modules that include this header file. This patch is to force them fit in csum apis with the right types. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 11月, 2017 1 次提交
-
-
由 Johannes Berg 提交于
When connected to a QoS/WMM AP, mac80211 should use a QoS NDP for probing it, instead of a regular non-QoS one, fix this. Change all the drivers to *not* allow QoS NDP for now, even though it looks like most of them should be OK with that. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 24 11月, 2017 1 次提交
-
-
由 Willem de Bruijn 提交于
Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b~1..d9d30adf. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 93991221 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee6 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdf ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2017 1 次提交
-
-
由 Neal Cardwell 提交于
Fix the TLP scheduling logic so that when scheduling a TLP probe, we ensure that the estimated time at which an RTO would fire accounts for the fact that ACKs indicating forward progress should push back RTO times. After the following fix: df92c839 ("tcp: fix xmit timer to only be reset if data ACKed/SACKed") we had an unintentional behavior change in the following kind of scenario: suppose the RTT variance has been very low recently. Then suppose we send out a flight of N packets and our RTT is 100ms: t=0: send a flight of N packets t=100ms: receive an ACK for N-1 packets The response before df92c839 that was: -> schedule a TLP for now + RTO_interval The response after df92c839 is: -> schedule a TLP for t=0 + RTO_interval Since RTO_interval = srtt + RTT_variance, this means that we have scheduled a TLP timer at a point in the future that only accounts for RTT_variance. If the RTT_variance term is small, this means that the timer fires soon. Before df92c839 this would not happen, because in that code, when we receive an ACK for a prefix of flight, we did: 1) Near the top of tcp_ack(), switch from TLP timer to RTO at write_queue_head->paket_tx_time + RTO_interval: if (icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) tcp_rearm_rto(sk); 2) In tcp_clean_rtx_queue(), update the RTO to now + RTO_interval: if (flag & FLAG_ACKED) { tcp_rearm_rto(sk); 3) In tcp_ack() after tcp_fastretrans_alert() switch from RTO to TLP at now + RTO_interval: if (icsk->icsk_pending == ICSK_TIME_RETRANS) tcp_schedule_loss_probe(sk); In df92c839 we removed that 3-phase dance, and instead directly set the TLP timer once: we set the TLP timer in cases like this to write_queue_head->packet_tx_time + RTO_interval. So if the RTT variance is small, then this means that this is setting the TLP timer to fire quite soon. This means if the ACK for the tail of the flight takes longer than an RTT to arrive (often due to delayed ACKs), then the TLP timer fires too quickly. Fixes: df92c839 ("tcp: fix xmit timer to only be reset if data ACKed/SACKed") Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2017 1 次提交
-
-
由 Xin Long 提交于
Now in sctp_setsockopt_maxseg user_frag or frag_point can be set with val >= 8 and val <= SCTP_MAX_CHUNK_LEN. But both checks are incorrect. val >= 8 means frag_point can even be less than SCTP_DEFAULT_MINSEGMENT. Then in sctp_datamsg_from_user(), when it's value is greater than cookie echo len and trying to bundle with cookie echo chunk, the first_len will overflow. The worse case is when it's value is equal as cookie echo len, first_len becomes 0, it will go into a dead loop for fragment later on. In Hangbin syzkaller testing env, oom was even triggered due to consecutive memory allocation in that loop. Besides, SCTP_MAX_CHUNK_LEN is the max size of the whole chunk, it should deduct the data header for frag_point or user_frag check. This patch does a proper check with SCTP_DEFAULT_MINSEGMENT subtracting the sctphdr and datahdr, SCTP_MAX_CHUNK_LEN subtracting datahdr when setting frag_point via sockopt. It also improves sctp_setsockopt_maxseg codes. Suggested-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: NHangbin Liu <liuhangbin@gmail.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2017 3 次提交
-
-
Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.comSigned-off-by: NSasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Add sparse-checked slab_flags_t for struct kmem_cache::flags (SLAB_POISON, etc). SLAB is bloated temporarily by switching to "unsigned long", but only temporarily. Link: http://lkml.kernel.org/r/20171021100225.GA22428@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Kubecek 提交于
According to the description, first argument of genlmsg_nlhdr() points to what genlmsg_put() returns, i.e. beginning of user header. Therefore we should only subtract size of genetlink header and netlink message header, not user header. This also means we don't need to pass the pointer to genetlink family and the same is true for genl_dump_check_consistent() which is the only caller of genlmsg_nlhdr(). (Note that at the moment, these functions are only used for families which do not have user header so that they are not affected.) Fixes: 670dc283 ("netlink: advertise incomplete dumps") Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2017 3 次提交
-
-
由 Eric Dumazet 提交于
syzbot easily found a regression added in our latest patches [1] No longer set tp->highest_sack to the head of the send queue since this is not logical and error prone. Only sack processing should maintain the pointer to an skb from rtx queue. We might in the future only remember the sequence instead of a pointer to skb, since rb-tree should allow a fast lookup. [1] BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1706 [inline] BUG: KASAN: use-after-free in tcp_ack+0x42bb/0x4fd0 net/ipv4/tcp_input.c:3537 Read of size 4 at addr ffff8801c154faa8 by task syz-executor4/12860 CPU: 0 PID: 12860 Comm: syz-executor4 Not tainted 4.14.0-next-20171113+ #41 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 tcp_highest_sack_seq include/net/tcp.h:1706 [inline] tcp_ack+0x42bb/0x4fd0 net/ipv4/tcp_input.c:3537 tcp_rcv_established+0x672/0x18a0 net/ipv4/tcp_input.c:5439 tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1468 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x124/0x360 net/core/sock.c:2264 release_sock+0xa4/0x2a0 net/core/sock.c:2778 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:632 [inline] sock_sendmsg+0xca/0x110 net/socket.c:642 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2048 __sys_sendmsg+0xe5/0x210 net/socket.c:2082 SYSC_sendmsg net/socket.c:2093 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2089 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x452879 RSP: 002b:00007fc9761bfbe8 EFLAGS: 00000212 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452879 RDX: 0000000000000000 RSI: 0000000020917fc8 RDI: 0000000000000015 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: 00000000006ee3a0 R13: 00000000ffffffff R14: 00007fc9761c06d4 R15: 0000000000000000 Allocated by task 12860: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc_node+0x144/0x760 mm/slab.c:3638 __alloc_skb+0xf1/0x780 net/core/skbuff.c:193 alloc_skb_fclone include/linux/skbuff.h:1023 [inline] sk_stream_alloc_skb+0x11d/0x900 net/ipv4/tcp.c:870 tcp_sendmsg_locked+0x1341/0x3b80 net/ipv4/tcp.c:1299 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1461 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:632 [inline] sock_sendmsg+0xca/0x110 net/socket.c:642 SYSC_sendto+0x358/0x5a0 net/socket.c:1749 SyS_sendto+0x40/0x50 net/socket.c:1717 entry_SYSCALL_64_fastpath+0x1f/0x96 Freed by task 12860: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3492 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3750 kfree_skbmem+0xdd/0x1d0 net/core/skbuff.c:603 __kfree_skb+0x1d/0x20 net/core/skbuff.c:642 sk_wmem_free_skb include/net/sock.h:1419 [inline] tcp_rtx_queue_unlink_and_free include/net/tcp.h:1682 [inline] tcp_clean_rtx_queue net/ipv4/tcp_input.c:3111 [inline] tcp_ack+0x1b17/0x4fd0 net/ipv4/tcp_input.c:3593 tcp_rcv_established+0x672/0x18a0 net/ipv4/tcp_input.c:5439 tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1468 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x124/0x360 net/core/sock.c:2264 release_sock+0xa4/0x2a0 net/core/sock.c:2778 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:632 [inline] sock_sendmsg+0xca/0x110 net/socket.c:642 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2048 __sys_sendmsg+0xe5/0x210 net/socket.c:2082 SYSC_sendmsg net/socket.c:2093 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2089 entry_SYSCALL_64_fastpath+0x1f/0x96 The buggy address belongs to the object at ffff8801c154fa80 which belongs to the cache skbuff_fclone_cache of size 456 The buggy address is located 40 bytes inside of 456-byte region [ffff8801c154fa80, ffff8801c154fc48) The buggy address belongs to the page: page:ffffea00070553c0 count:1 mapcount:0 mapping:ffff8801c154f080 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffff8801c154f080 0000000000000000 0000000100000006 raw: ffffea00070a5a20 ffffea0006a18360 ffff8801d9ca0500 0000000000000000 page dumped because: kasan: bad access detected Fixes: 737ff314 ("tcp: use sequence distance to detect reordering") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Make default TCP default congestion control to a per namespace value. This changes default congestion control to a pointer to congestion ops (rather than implicit as first element of available lsit). The congestion control setting of new namespaces is inherited from the current setting of the root namespace. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry V. Levin 提交于
Move inclusion of a private kernel header <net/tcp.h> from uapi/linux/tls.h to its only user - net/tls.h, to fix the following linux/tls.h userspace compilation error: /usr/include/linux/tls.h:41:21: fatal error: net/tcp.h: No such file or directory As to this point uapi/linux/tls.h was totaly unusuable for userspace, cleanup this header file further by moving other redundant includes to net/tls.h. Fixes: 3c4d7559 ("tls: kernel TLS support") Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2017 4 次提交
-
-
由 Ilya Lesokhin 提交于
move tls_make_aad as it is going to be reused by the device offload code and rx path. Remove unused recv parameter. Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilya Lesokhin 提交于
Previously the TLS ulp context would leak if we attached a TLS ulp to a socket but did not use the TLS_TX setsockopt, or did use it but it failed. This patch solves the issue by overriding prot[TLS_BASE_TX].close and fixing tls_sk_proto_close to work properly when its called with ctx->tx_conf == TLS_BASE_TX. This patch also removes ctx->free_resources as we can use ctx->tx_conf to obtain the relevant information. Fixes: 3c4d7559 ('tls: kernel TLS support') Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilya Lesokhin 提交于
The tx configuration is now stored in ctx->tx_conf. And sk->sk_prot is updated trough a function This will simplify things when we add rx and support for different possible tx and rx cross configurations. Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I had many reports that TSQ logic breaks wifi aggregation. Current logic is to allow up to 1 ms of bytes to be queued into qdisc and drivers queues. But Wifi aggregation needs a bigger budget to allow bigger rates to be discovered by various TCP Congestion Controls algorithms. This patch adds an extra socket field, allowing wifi drivers to select another log scale to derive TCP Small Queue credit from current pacing rate. Initial value is 10, meaning that this patch does not change current behavior. We expect wifi drivers to set this field to smaller values (tests have been done with values from 6 to 9) They would have to use following template : if (skb->sk && skb->sk->sk_pacing_shift != MY_PACING_SHIFT) skb->sk->sk_pacing_shift = MY_PACING_SHIFT; Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1670041Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Toke Høiland-Jørgensen <toke@toke.dk> Cc: Kir Kolyshkin <kir@openvz.org> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 11月, 2017 2 次提交
-
-
由 Florian Fainelli 提交于
Add a new type: DSA_TAG_PROTO_PREPEND which allows us to support for the 4-bytes Broadcom tag that we already support, but in a format where it is pre-pended to the packet instead of located between the MAC SA and the Ethertyper (DSA_TAG_PROTO_BRCM). Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2017 3 次提交
-
-
由 Mat Martineau 提交于
ip6_frag_id was only used by UFO, which has been removed. ipv6_proxy_select_ident() only existed to set ip6_frag_id and has no in-tree callers. Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
FACK loss detection has been disabled by default and the successor RACK subsumed FACK and can handle reordering better. This patch removes FACK to simplify TCP loss recovery. Signed-off-by: NYuchung Cheng <ycheng@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Reviewed-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NSoheil Hassas Yeganeh <soheil@google.com> Reviewed-by: NPriyaranjan Jha <priyarjha@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
Currently, the TIPC RPS dissector is based only on the incoming packets' source node address, hence steering all traffic from a node to the same core. We have seen that this makes the links vulnerable to starvation and unnecessary resets when we turn down the link tolerance to very low values. To reduce the risk of this happening, we exempt probe and probe replies packets from the convergence to one core per source node. Instead, we do the opposite, - we try to diverge those packets across as many cores as possible, by randomizing the flow selector key. To make such packets identifiable to the dissector, we add a new 'is_keepalive' bit to word 0 of the LINK_PROTOCOL header. This bit is set both for PROBE and PROBE_REPLY messages, and only for those. It should be noted that these packets are not part of any flow anyway, and only constitute a minuscule fraction of all packets sent across a link. Hence, there is no risk that this will affect overall performance. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 11月, 2017 2 次提交
-
-
由 Manish Kurup 提交于
Using a spinlock in the VLAN action causes performance issues when the VLAN action is used on multiple cores. Rewrote the VLAN action to use RCU read locking for reads and updates instead. All functions now use an RCU dereferenced pointer to access the VLAN action context. Modified helper functions used by other modules, to use the RCU as opposed to directly accessing the structure. Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NManish Kurup <manish.kurup@verizon.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Note that when a new netns is created, it inherits its sysctl_tcp_rmem and sysctl_tcp_wmem from initial netns. This change is needed so that we can refine TCP rcvbuf autotuning, to take RTT into consideration. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-