Replace mdelay with msleep to remove the busy loop waiting.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reorder inclusions of <linux/xxx.h> for redability, according to
alphabetical ordering.  Also, unnecessary header comments are removed.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'before_power' was used to check the previous status when resume() is
called.  However, FB_BLANK_POWERDOWN was used in suspend() all the time,
so there is no need to check the previous status.  Also, redundant return
variables are removed to reduce the code.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid
memory addresses.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove unnecessary NULL deference check, because it was already checked in
s6e63m0_probe().  Also, POWER_IS_ON is replaced with
s6e63m0_power_is_on().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace mdelay with msleep to remove the busy loop waiting.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Lowercase names of structs should be used, because they are
not preprocessor macros.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reorder inclusions of <linux/xxx.h> for redability, according to
alphabetical ordering.  Also, unnecessary header comments are removed.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Redundant return variables are removed to reduce the code.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid
memory addresses.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removee unnecessary NULL deference check, because it was already checked
in ld9040_probe().  Also, power_is_on is replaced with
ld9040_power_is_on().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace mdelay with msleep to remove the busy loop waiting.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the lms501kf03 LCD panel driver.  The lms501kf03 LCD panel (800 x 480)
driver uses 3-wired SPI inteface.

[akpm@linux-foundation.org: remove unused variable `before_power']
[akpm@linux-foundation.org: make lms501kf03_shutdown() static, per Fengguang]
Signed-off-by: NIlho Lee <Ilho215.lee@samsung.com>
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: "devendra.aaru" <devendra.aaru@gmail.com>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After I came across a help text for SUNGEM mentioning a broken sun.com
URL, I felt like fixing those up, as they are now pointing to oracle.com
URLs.
Signed-off-by: NChristian Kujau <lists@nerdbynature.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following sparse error:

  drivers/video/mx3fb.c:1309:28: warning: Using plain integer as NULL pointer
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

disable_irq() should be moved to exynos_dp_suspend(), because enable_irq()
is called at exynos_dp_resume().
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

of_find_node_by_name() returns a node pointer with refcount incremented,
use of_node_put() on it when done.

of_find_node_by_name() will call of_node_put() against the node pass to
from parameter, thus we also need to call of_node_get(from) before calling
of_find_node_by_name().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use ARCH_ dependancy when using s3c-fb.  S3C_DEV_FB, S5P_DEV_FIMD0 cannot
be enabled on EXYNOS5.  So, ARCH_ should be used as dependancy for s3c-fb.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devm_* APIs are device managed and make exit and cleanup code simpler.
While at it also remove some unused labels and fix an error path.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NDonghwa Lee <dh09.lee@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Checking an unsigned variable for negative value returns false.  Hence use
the macro to fix it.

Fixes the following smatch warning:

  drivers/video/exynos/exynos_mipi_dsi.c:417 exynos_mipi_dsi_probe() warn: unsigned 'dsim->irq' is never less than zero.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NDonghwa Lee <dh09.lee@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devm_* APIs are device managed and make error handling and code cleanup
simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NDonghwa Lee <dh09.lee@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

FB_IMX is the framebuffer driver used by MX1, MX21, MX25 and MX27 processors.

Pass this information to the Kconfig text to make it clear.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add spi port support in mmp display controller.  This port is from display
controller and for panel usage.  This driver implemented and registered as
a spi master.
Signed-off-by: NZhou Zhu <zzhu3@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Cc: Lisa Du <cldu@marvell.com>
Cc: Guoqing Li <ligq@marvell.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add tpo hvga panel support in marvell display framework.  This panel
driver implements modes query and power on/off.

This panel driver gets panel config/ plat power on/off/ connected path
name from machine-info and registered as a spi device.  This panel
driver uses mmp_disp supplied register_panel function to register panel
to path as machine-info defined.
Signed-off-by: NLisa Du <cldu@marvell.com>
Signed-off-by: NZhou Zhu <zzhu3@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Cc: Guoqing Li <ligq@marvell.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Marvell mmp series display controller support in mmpdisp subsystem.

This driver focus on implementation of hardware operations of
path/overlay, which is defined in mmp display subsystem interface.  This
driver registers all pathes to mmp display framework.
Signed-off-by: NGuoqing Li <ligq@marvell.com>
Signed-off-by: NLisa Du <cldu@marvell.com>
Signed-off-by: NZhou Zhu <zzhu3@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 16559ae4 ("kgdb: remove #include <linux/serial_8250.h> from
kgdb.h") changes the kgdb.h file so that drivers including it do not
implicitly include linux/platform_device.h.  The mmp framebuffer driver
is new, so Greg did not have a chance to fix it up when introducing his
change.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Zhou Zhu <zzhu3@marvell.com>
Cc: Lisa Du <cldu@marvell.com>
Cc: Guoqing Li <ligq@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add fb support for Marvell mmp display subsystem.  This driver is
configured using "buffer driver mach info".  With configured name of path,
this driver get path using using exported interface of mmp display driver.
Then this driver get overlay using configured id and operates on this
overlay to show buffers on display devices.
Signed-off-by: NZhou Zhu <zzhu3@marvell.com>
Signed-off-by: NLisa Du <cldu@marvell.com>
Cc: Guoqing Li <ligq@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add mmp display subsystem to support Marvell MMP display controllers.

This subsystem contains 4 parts:
--fb folder
--core.c
--hw folder
--panel folder

1. fb folder contains implementation of fb.  fb get path and overlay
   from common interface and operates on these structures.

2. core.c provides common interface for a hardware abstraction.  Major
   parts of this interface are:

   a) Path: path is a output device connected to a panel or HDMI TV.  Main
      operations of the path is set/get timing/output color.  fb operates
      output device through path structure.

   b) Ovly: Ovly is a buffer shown on the path.

      Ovly describes frame buffer and its source/destination size, offset,
      input color, buffer address, z-order, and so on.  Each fb device maps
      to one overlay.

3. hw folder contains implementation of hardware operations defined by
   core.c.  It registers paths for fb use.

4. panel folder contains implementation of panels.  It's connected to
   path.  Panel drivers would also regiester panels and linked to path
   when probe.
Signed-off-by: NZhou Zhu <zzhu3@marvell.com>
Signed-off-by: NLisa Du <cldu@marvell.com>
Cc: Guoqing Li <ligq@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Framebuffer support for the Goldfish emulator.  This takes the Google
emulator and applies the x86 cleanups as well as moving the blank
methods to the usual Linux place and dropping the Android early suspend
logic (for now at least, that can be looked at as Android and upstream
converge).  Dropped various oddities like setting MTRRs on a virtual
frame buffer emulation...

With the drivers so far you can now boot a Linux initrd and have fun.

[sheng@linux.intel.com: cleaned up to handle x86]
[thomas.keel@intel.com: ported to 3.4]
[alan@linux.intel.com: cleaned up for style and 3.7, moved blank methods]
[akpm@linux-foundation.org: fix (silly) sparse warnings]
Signed-off-by: NMike A. Chan <mikechan@google.com>
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NYunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NXiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NBruce Beare <bruce.j.beare@intel.com>
Signed-off-by: NTom Keel <thomas.keel@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Explicitly clear_margins when clearing the logo, in case the font dimensions
are non-integral to the framebuffer dimensions.
Signed-off-by: NKamal Mostafa <kamal@whence.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the device rebind procedures for cardbus devices from the pm.resume
into the pm.complete callback.

The reason for moving the code is: "[...] The PM code needs to send
suspend and resume messages to every device in the right order, and it
can't do that if new devices are being added at the same time.  [...]"

However the situation really isn't quite that rigid.  In particular,
adding new children during a resume callback shouldn't cause much of
problem because the children don't need to be resumed anyway (since they
were never suspended).  On the other hand, if you do it you will get a
dev_warn() from the PM core, something like 'parent should not be
sleeping'.

Still, it is considered bad form and should be avoided if possible."

(Alan Stern's full comment about the topic can
be found here: <https://lkml.org/lkml/2012/7/10/254>)
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes the following sparse warnings:
drivers/hwmon/ntc_thermistor.c:46:31: warning:
symbol 'ncpXXwb473' was not declared. Should it be static?
drivers/hwmon/ntc_thermistor.c:82:31: warning:
symbol 'ncpXXwl333' was not declared. Should it be static?

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The adt7420 is software compatible to the adt7410.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Use the I2C_ADDRS macro to initialize the I2C device's address_list. Doing so
saves a few lines of boilerplate code.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Use the SIMPLE_DEV_PM_OPS macro to declare the driver's pm_ops.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Only build the suspend/resume code if CONFIG_PM_SLEEP is selected. Currently the
code is built if CONFIG_PM is selected, but it will also be selected if only
runtime PM support is built into the kernel.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Make sure to clear the mode bits from the config register before setting the new
mode. Otherwise we might end up with a different mode than we want to.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

If a qdisc is installed on a ppp device, its possible to get
a lockdep splat under stress, because nested dev_queue_xmit() can
lock busylock a second time (on a different device, so its a false
positive)

Avoid this problem using a distinct lock_class_key for ppp
devices.
Reported-by: NYanko Kaneti <yaneti@declera.com>
Tested-by: NYanko Kaneti <yaneti@declera.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in the previous commit : f1f220ea1dda078, the BUSY state of buffer is wrongly
deleted. this patch just restore it.
Signed-off-by: Nxiong <xiong@qca.qualcomm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit d3720456.

This change is incorrect, as per Jan Beulich:

====================
But this is wrong from all we can tell, we discussed this before
(Wei pointed to the discussion in an earlier reply). The core of
it is that the put here parallels the one in netbk_tx_err(), and
the one in xenvif_carrier_off() matches the get from
xenvif_connect() (which normally would be done on the path
coming through xenvif_disconnect()).
====================

And a previous discussion of this issue is at:

http://marc.info/?l=xen-devel&m=136084174026977&w=2Signed-off-by: NDavid S. Miller <davem@davemloft.net>