- 16 5月, 2015 1 次提交
-
-
由 Ezequiel Garcia 提交于
cpu_set was removed (along with a bunch of cpumask helpers) by commit 2f0f267e ("cpumask: remove deprecated functions."). Fix this by replacing cpu_set with cpumask_set_cpu. Without this fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y. arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup': arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration] Fixes: 90db024f ("MIPS: smp-cps: cpu_set FPU mask if FPU present") Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Acked-by: NNiklas Cassel <niklass@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9912/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 13 5月, 2015 3 次提交
-
-
由 Petri Gynther 提交于
__show_regs() calls show_regs_print_info(), which already outputs the Tainted: information. So, no need to output it twice. Signed-off-by: NPetri Gynther <pgynther@google.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9997/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Fix "BUG: using smp_processor_id() in preemptible" reported in accesses to thread's FPU defaults: the value to initialise FSCR to at program startup, the FCSR r/w mask and the contents of FIR in full FPU emulation, removing a regression introduced with 9b26616c [MIPS: Respect the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR feature flags for full emulation]. Use `boot_cpu_data' to obtain the data from, following the approach that `cpu_has_*' macros take and avoiding the call to `smp_processor_id' made in the reference to `current_cpu_data'. The contents of FSCR have to be consistent across processors in an SMP system, the settings there must not change as a thread is migrated across processors. And the contents of FIR are guaranteed to be consistent in FPU emulation, by definition. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Tested-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Tested-by: NPaul Martin <paul.martin@codethink.co.uk> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10030/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Commit 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") reworked the ELF FP ABI mode selection logic, but when CONFIG_MIPS_O32_FP64_SUPPORT is enabled it breaks the use of binaries which have no PT_MIPS_ABIFLAGS program header & associated .MIPS.abiflags section. A default mode is selected based upon whether the ELF contains MIPS32 or MIPS64 code, but that selection is made in arch_elf_pt_proc. arch_elf_pt_proc only executes when a PT_MIPS_ABIFLAGS program header is found. If one is not found then arch_elf_pt_proc is never called, and no default overall_fp_mode value is selected. When arch_check_elf is called, both abi0 & abi1 are MIPS_ABI_FP_UNKNOWN which leads to both prog_req & interp_req being set to none_req. none_req matches none of the conditions for mode selection at the end of arch_check_elf, so overall_fp_mode is left untouched. Finally once mips_set_personality_fp is called the BUG() in the default case is then hit & the kernel likely panics. Fix this by moving the selection of a default overall mode to the start of arch_check_elf, which runs once per ELF executed regardless of whether it has a PT_MIPS_ABIFLAGS program header. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.0+ Patchwork: http://patchwork.linux-mips.org/patch/9978/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 12 5月, 2015 1 次提交
-
-
由 Ralf Baechle 提交于
CC arch/mips/kernel/smp.o arch/mips/kernel/smp.c: In function ‘start_secondary’: arch/mips/kernel/smp.c:149:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(cpu, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘smp_prepare_boot_cpu’: arch/mips/kernel/smp.c:211:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(0, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘__cpu_up’: arch/mips/kernel/smp.c:221:10: error: passing argument 2 of ‘cpumask_test_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] while (!cpumask_test_cpu(cpu, &cpu_callin_map)) ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:294:90: note: expected ‘const struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline int cpumask_test_cpu(int cpu, const struct cpumask *cpumask) ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/smp.o] Error 1 make[1]: *** [arch/mips/kernel] Error 2 make: *** [arch/mips] Error 2 Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 13 4月, 2015 1 次提交
-
-
由 Richard Weinberger 提交于
Signed-off-by: NRichard Weinberger <richard@nod.at>
-
- 10 4月, 2015 5 次提交
-
-
由 Niklas Cassel 提交于
If we have an FPU, enroll ourselves in the FPU-full mask. Matching the MT_SMP and CMP implementations of smp_setup. Signed-off-by: NNiklas Cassel <niklass@axis.com> Cc: paul.burton@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8948/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
Commit 6ebb496f("MIPS: kernel: entry.S: Add MIPS R6 related definitions") added the MIPSR6 definition but it did not update the ISA level of the actual assembly code so a pre-MIPSR6 jr.hb instruction was generated instead. Fix this by using the MISP_ISA_LEVEL_RAW macro. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Fixes: 6ebb496f("MIPS: kernel: entry.S: Add MIPS R6 related definitions") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9386/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
When emulating a regular lh/lw/lhu/sh/sw we need to use the appropriate instruction if we are in EVA mode. This is necessary for userspace applications which trigger alignment exceptions. In such case, the userspace load/store instruction needs to be emulated with the correct eva/non-eva instruction by the kernel emulator. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Fixes: c1771216 ("MIPS: kernel: unaligned: Handle unaligned accesses for EVA") Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9503/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
It's best to surround such complex macros with do {} while statements so they can appear as independent logical blocks when used within other control blocks. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9502/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
Commit c1771216 ("MIPS: kernel: unaligned: Handle unaligned accesses for EVA") allowed unaligned accesses to be emulated for EVA. However, when emulating regular load/store unaligned accesses, we need to use the appropriate "address space" instructions for that. Previously, an unaligned load/store instruction in kernel space would have used the corresponding EVA instructions to emulate it which led to segmentation faults because of the address translation that happens with EVA instructions. This is now fixed by using the EVA instruction only when emulating EVA unaligned accesses. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Fixes: c1771216 ("MIPS: kernel: unaligned: Handle unaligned accesses for EVA") Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9501/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 08 4月, 2015 19 次提交
-
-
由 Ralf Baechle 提交于
Introduced in 34c2f668 (MIPS: microMIPS: Add unaligned access support.) Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Factor out FPU feature probing, mainly to remove code duplication from `fpu_disable'. No functional change although shuffle some code to avoid forward references. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9712/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Define the central place the default FCSR value is set from, initialised in `cpu_probe'. Determine the FCSR mask applied to values written to the register with CTC1 in the full emulation mode and via ptrace(2), according to the ISA level of processor hardware or the writability of bits 31:18 if actual FPU hardware is used. Software may rely on FCSR bits whose functions our emulator does not implement, so it should not allow them to be set or software may get confused. For ptrace(2) it's just sanity. [ralf@linux-mips.org: Fixed double inclusion of <asm/current.h>.] Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9711/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Implement FIR feature flags in the FPU emulator according to features supported and architecture level requirements. The W, L and F64 bits have only been added at level #2 even though the features they refer to were also included with the MIPS64r1 ISA and the W fixed-point format also with the MIPS32r1 ISA. This is only relevant for the full emulation mode and the emulated CFC1 instruction as well as ptrace(2) accesses. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9707/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Correct an ISA level determination problem introduced with 8b8aa636 [MIPS: kernel: cpu-probe.c: Add support for MIPS R6], reverting explicit masking against individual `MIPS_CPU_ISA_*' macros in FPU feature determination. Feature macros such as `cpu_has_mips_r' cannot be used here, because they operate on CPU #0 and we want to refer to the current CPU instead. They cannot be used for masking against the current CPU either because they mask against CPU #0 too, e.g.: # define cpu_has_mips32r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1) Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9706/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Rework `process_fpemu_return' and move IEEE 754 exception interpretation there, from `do_fpe'. Record the cause bits set in FCSR before they are cleared and pass them through to `process_fpemu_return' so as to set `si_code' correctly too for SIGFPE signals sent from emulation rather than those issued by hardware with the FPE processor exception only. For simplicity `mipsr2_decoder' assumes `*fcr31' has been preinitialised and only sets it to anything if an FPU instruction has been emulated, which in turn is the only case SIGFPE can be issued for here. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9705/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Clear any FCSR cause bits recorded in the saved FPU context after emulation in all cases rather than in `do_fpe' only, so that any unmasked IEEE 754 exception left from emulation does not cause a fatal kernel-mode FPE hardware exception with the CTC1 instruction used by the kernel to subsequently restore FCSR hardware from the saved FPU context. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9704/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Respect the FCSR exception mask when interpreting the IEEE 754 exception condition to report with SIGFPE in `si_code', so as not to use one that has been masked where a different one set in parallel caused the FPE hardware exception to trigger. As per the IEEE Std 754 the Inexact exception can happen together with Overflow or Underflow. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9703/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Correct ISA requirements for floating-point instructions: * the CU3 exception signifies a real COP3 instruction in MIPS I & II, * the BC1FL and BC1TL instructions are not supported in MIPS I, * the SQRT.fmt instructions are indeed supported in MIPS II, * the LDC1 and SDC1 instructions are indeed supported in MIPS32r1, * the CEIL.W.fmt, FLOOR.W.fmt, ROUND.W.fmt and TRUNC.W.fmt instructions are indeed supported in MIPS32, * the CVT.L.fmt and CVT.fmt.L instructions are indeed supported in MIPS32r2 and MIPS32r6, * the CEIL.L.fmt, FLOOR.L.fmt, ROUND.L.fmt and TRUNC.L.fmt instructions are indeed supported in MIPS32r2 and MIPS32r6, * the RSQRT.fmt and RECIP.fmt instructions are indeed supported in MIPS64r1, Also simplify conditionals for MIPS III and MIPS IV FPU instructions and the handling of the MOVCI minor opcode. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9700/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Do not lose the other half of the BREAK code where there is an upper half. This is so that e.g. `BREAK 7, 7' is not interpreted as a divide by zero trap, while `BREAK 0, 7' or `BREAK 7, 0' still are. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9697/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Add the missing microMIPS BREAK16 instruction code interpretation and reshape code removing instruction fetching duplication and the separate call to `do_trap_or_bp' in the MIPS16 path. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9696/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Correct the interpretation of the immediate MIPS16 BREAK instruction code embedded in the instruction word across bits 10:5 rather than 11:6 as current code implies, fixing the interpretation of integer overflow and divide by zero traps. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9695/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Replace a hardcoded numeric bitmask for FCSR cause bits with `FPU_CSR_ALL_X' in `__build_clear_fpe'. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9684/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Changes applied to `do_cpu' over time reduced the use of the SIGILL issued with `force_sig' at the end to a single CU3 case only in the switch statement there. Move that `force_sig' call over to right where required then and toss out the pile of gotos now not needed to skip over the call, replacing them with regular breaks out of the switch. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9683/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Fold a nested `if' statement for the R6 case in `do_ri' into its containing `if' block, removing excessive indentation causing code to extend beyond 79 columns. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9679/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Commit 46490b57 [MIPS: kernel: elf: Improve the overall ABI and FPU mode checks] reduced `get_fp_abi' to an elaborate pass-through. Drop it then. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9677/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Correct a copy-and-paste issue with the description for `movf_func' referring to `movt_func'. Reformat the former function to match the latter. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9675/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Reword the comment for `__cpu_has_fpu' to make it unambiguous this code is for external floating-point units only, generally MIPS I processors using the original CP1 hardware interface. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9673/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Adjust the explanatory comment for FPU emulator traps according to ba3049ed [MIPS: Switch FPU emulator trap to BREAK instruction.]; originally coming from `do_ade'. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9672/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 01 4月, 2015 10 次提交
-
-
由 Huacai Chen 提交于
This patch enable hardware performance counter support for Loongson-3's perf events. Signed-off-by: NHuacai Chen <chenhc@lemote.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/9618/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joshua Kinard 提交于
This allows the kernel to correctly detect an R16000 MIPS CPU on systems that have those. Otherwise, such systems will detect the CPU as an R14000, due to similarities in the CPU PRId value. Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Cc: Linux MIPS List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9092/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
If a machine-specific hook is not implemented for restart, poweroff, or halt, fall back to halting secondary CPUs, disabling interrupts, and spinning. In the case of restart, attempt to restart the system via do_kernel_restart() (which will call any registered restart handlers) before halting. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9600/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
Since cpu_wait() enables interrupts upon return, CPUs which have entered stop_this_cpu() may still end up handling interrupts. This can lead to the softlockup detector firing on a panic or restart/poweroff/halt. Just disable interrupts and spin to ensure nothing else runs on the CPU once it has entered stop_this_cpu(). Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9601/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Toma Tabacu 提交于
Remove a cast to the 'mips16e_instruction' union inside an if condition and instead do an assignment to a local 'union mips16e_instruction' variable's 'full' member before the if statement and use this variable in the if condition. This is the error message reported by clang: arch/mips/kernel/branch.c:38:8: error: cast to union type from type 'unsigned short' not present in union if (((union mips16e_instruction)inst).ri.opcode ^ ~~~~ The changed code can be compiled successfully by both gcc and clang. Signed-off-by: NToma Tabacu <toma.tabacu@imgtec.com> Signed-off-by: NDaniel Sanders <daniel.sanders@imgtec.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: David Daney <david.daney@cavium.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9312/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kevin Cernekee 提交于
Some machines only have one bus type to register (e.g. "simple-bus"). Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8845/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Deng-Cheng Zhu 提交于
Use sb1250 hpt for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9488/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Deng-Cheng Zhu 提交于
This is to make checkpatch.pl happy for the next patch. It would otherwise say -- ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL. Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9487/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Deng-Cheng Zhu 提交于
This is to prepare for the upcoming read_sched_clock implementation, which will also need to get cycles from the high precision timer. Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9486/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Deng-Cheng Zhu 提交于
Use txx9 up-counter for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9484/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-