ERTM and streaming mode L2CAP sockets have no minimum packet length. Only
basic mode connections have minimum length.

Instead, validate the packet containing all necessary control, FCS,
and SAR fields.

The patch fixes the drop of valid packets with length lower than 4.
Signed-off-by: NNathan Holstein <ngh@isomerica.net>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Since all TxSeq values are modulo, we shall not compare them directly. We
have to compare their offset inside the TxWindow instead.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch makes l2cap_ertm_send() similar to the Send-Data action of
the ERTM spec. We shall not check for RemoteBusy or WAIT_F state
inside l2cap_ertm_send().

Such checks were causing a bug in the retransmission logic of ERTM and
making ERTM stalls until the ACL is dropped.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The SAR bits doesn't make sense for an S-frame. It doesn't use SAR.

Checking SAR for a S-frames can lead to L2CAP errors, it could close
the channel with an invalid packet length, since we was removing the 2
of the of any frame that match SAR start bits, without check if it is
an I-frame.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

All ERTM operations regarding the txWindow should be modulo 64,
otherwise we confuse the ERTM logic and connections will break.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We shall not use an unsigned var since we are expecting negatives value
there. Using unsigned causes ERTM connection to close due to invalid
ReqSeq numbers.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This reverts commit 84fb0a63 which adds
the L2CAP Extended Features to the Kconfig, that is actually not needed.
One can use other mechanisms to enable L2CAP Extended Features.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We don't need these parameters anymore since we have socket options for
them.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Due to race condition in L2CAP state machine L2CAP Connection Request
may be sent twice for SDP with the same source channel id. Problems
reported connecting to Apple products, some carkit, Blackberry phones.

...
2010-06-07 21:18:03.651031 < ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
2010-06-07 21:18:03.653473 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 1 packets 1
2010-06-07 21:18:03.653808 > HCI Event: Auth Complete (0x06) plen 3
    status 0x00 handle 1
2010-06-07 21:18:03.653869 < ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
...

Patch uses L2CAP_CONF_CONNECT_PEND flag to mark that L2CAP Connection
Request has been sent already.

Modified version of patch from Ville Tervo.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes from net/ (but not any netfilter files)
all the unnecessary return; statements that precede the
last closing brace of void functions.

It does not remove the returns that are immediately
preceded by a label as gcc doesn't like that.

Done via:
$ grep -rP --include=*.[ch] -l "return;\n}" net/ | \
  xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }'
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were some left-overs that used sk->sk_sleep instead of the new
sk_sleep() helper.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

On the receipt of an RR(P=1) under RemoteBusy set to TRUE(on the RECV
state table) we have to call sendIorRRorRNR(F=1) and just after set
RemoteBusy to False. This leads to a freeze in the sending process since
it's not allowed send data with RemoteBusy set to true and no one
call SendPending-I-Frames after set RemoteBusy to false(The last action
for that event).

Actually sendIorRRorRNR() calls SendPending-I-Frames but at that moment
RemoteBusy is still True and we cannot send any frame, after, no one
calls SendPending-I-Frames again and the sending process stops.

The solution here is to set RemoteBusy to false inside
SendPending-I-Frames just before call SendPending-I-Frames. That will
make SendPending-I-Frames able to send frames. This solution is similar
to what RR(P=0)(F=0) on the RECV table and RR(P=1) on the SREJ_SENT
table do.

Actually doesn't make any sense call SendPending-I-Frames if we can send
any frame, i. e., RemoteBusy is True.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The checks should be done before the the memcpy to avoid buffer
overflow.
Reported-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

l2cap_ertm_send() can be called both from user context and bottom half
context. The socket locks for that contexts are different, the user
context uses a mutex(which can sleep) and the second one uses a
spinlock_bh. That creates a race condition when we have interruptions on
both contexts at the same time.

The better way to solve this is to add a new spinlock to lock
l2cap_ertm_send() and the vars it access. The other solution was to defer
l2cap_ertm_send() with a workqueue, but we the sending process already
has one defer on the hci layer. It's not a good idea add another one.

The patch refactor the code to create l2cap_retransmit_frames(), then we
encapulate the lock of l2cap_ertm_send() for some call. It also changes
l2cap_retransmit_frame() to l2cap_retransmit_one_frame() to avoid
confusion
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

To guarantee that all packets we sent were received we need to wait for
theirs ack before shutdown the socket.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Supports Local Busy condition handling through a waitqueue that wake ups
each 200ms and try to push the packets to the upper layer. If it can
push all the queue then it leaves the Local Busy state.

The patch modifies the behaviour of l2cap_ertm_reassembly_sdu() to
support retry of the push operation.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Add checks for invalid tx_seq and fixes the duplicated tx_seq check.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There is a plenty of situation where ERTM shall close the channel, this
commit treats the cases regarding Invalid Frame Detection.
It create one reassembly SDU function for ERTM and other for Streaming
Mode to make the Invalid Frame Detection handling less complex.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Make the code flow cleaner and changes the function to void.
It also fixes a potential NULL dereference with skb.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

hci_send_acl can't fail, so we can make it void. This patch changes
that and all the funcions that use hci_send_acl().
That change exposed a bug on sending connectionless data. We were not
reporting the lenght send back to the user space.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

A spin_lock_init() call was missing. :)
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

F-bit set should be processed only if we are in the WAIT_F state.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Trivial clean up.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

That action is not specified by the ERTM spec, so removing it.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We can set the SAR bits in the control field directly.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The code was reusing the control var without its reinitialization.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Add this check to getsockopt makes possible to fail early instead of
waiting until listen / connect.
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: NGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

if enable_ertm is true and we have SOCK_STREAM the default mode will be
ERTM, otherwise Basic Mode.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The L2CAP Extended Features are still unstable and under development,
so we are adding them under the EXPERIMENTAL flag to get more feedback
on them. L2CAP Extended Features includes the Enhanced Retransmission
and Streaming Modes, Frame Check Sequence (FCS), and Segmentation and
Reassemby (SAR).
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When the I-frame received is the expected, i.e., its tx_seq is equal to
expected_tx_seq and we are under a SREJ, we can just add it to the tail
of the list. Doing that we change the complexity from O(n) to O(1).
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

l2cap_drop_acked_frames() was droping not sent packets, causing them to
be not transmitted.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The code was crashing due to a invalid access to hci_conn after the
channel disconnect.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If there is no frames to retransmit l2cap was crashing the kernel, now
we check if the queue is empty first.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

With the sockopt extension we can set a per-channel MaxTx value.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Very useful for testing purposes.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
[jprvita@profusion.mobi: improved parameter description]
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Now that we can set the txWindow we need to change the acknowledgement
procedure to ack after each (pi->txWindow/6 + 1). The plus 1 is to avoid
the zero value.
It also renames pi->num_to_ack to a better name: pi->num_acked.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Now we can set/get Transmission Window size via sockopt.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

As specified by Bluetooth 3.0 spec we shall send an acknowledgment using
the Send-Ack() after clear the SREJ list.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: NJoão Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>